Professional Documents
Culture Documents
Application:
Stationary or portable screw compressor
n For capacity control: full load/idling/stop
n For pressure control at start, idling and stop
Function:
n Suction control/non return valve,
normally open for 2-point control: full load/idling/stop
n Control valve for idling pressure control
n Integrated venting valve
Installation Diagram
Schematic picture
Picture 1
Installation:
On the suction flange of the air end.
Use filtered air from separator filter.
Installation instructions available
Ordering details:
Specify type (top or side entry), airend-flange version,
solenoid valve voltage and type.
Maintenance:
Ask for original HOERBIGER replacement parts.
Details
Type AS25
Recommended application Flowrate up to 3,5 m3/min; motor power up to 22 kW
Max. operating pressure PS bar (g) 16
Operating temperature °C Constant +10 to +90 • Occasional –20 to +120 (at start, stop)
Control valve Normally open with non-return valve
Pressure drop at full load
Datentabelle See diagram
Configuration AS25 T (Top Entry), AS25S (Side Entry)
Dimension, connections See picture 3
Mounting on air end Flange N°1 and N°2 are available see picture 3; other flanges on request
Connection to the air filter Standard: sleeve 52 mm, G1 1/4” internal thread
Actuation: Solenoid valve Normally open solenoid valve; available types and voltages: see table 4
Oil drainage port Available (G 1/8“ thread)
Monitoring: 2 connections M6 available - see picture 3
Air filter clogging
Materials Housing and flanges: aluminium.
Internal parts: brass, anodized aluminum, stainless steel, Viton® sealings,
check valve with vulcanized Viton® sealing
Weight kg 1,5
HOERBIGER Kompressortechnik GmbH
D-86956 Schongau, Im Forchet 5
Phone +49 (0) 88 61 210-0, Fax +49 (0) 88 61 210-3273
Mail: info-rcc@hoerbiger.com
www.hoerbiger.com
AKT4R835E200704
Dimensions, Type: AS25 top and side entry version
AIREND FLANGE
O
Picture 3 O 62
121 121 ,
105
,62 O
11 O1
69,71
q 100
q 140
13
VERSION 1 VERSION 2
20
52 G1 1/4"
oiloildrenage
drainage port
portG1/8“
G1/8"
air fil
S.V. 1 : G1/8" internal thread
O 52
151
oiloildrenage
drainage port
portG1/8“
G1/8"
Pressure drop at full load Solenoid valves table Passage area Ø Voltage
version (mm)
Picture 4 24V DC
S.V.1 1.7 24V 50/60 Hz
110V 50Hz
120V 60Hz
230V 50Hz
S.V.2 2.5 240V 60Hz
others on request
HOERBIGER can not grant any warranty for the correctness of technical or other
data in catalogues, brochures and other printed material. HOERBIGER reserves
the right to alter its products without notice. This also applies to products already
on order provided that such alternations can be made without subsequential
changes being necessary in specifications already agreed.