Professional Documents
Culture Documents
EQUIPMENTS
2. MONTAGE ................................................................................................. 4
6. TROUBLESHOOTING .............................................................................. 6
1.1. DESCRIPTION
Package
Dimensions Weight
Code Dimensions
(mm) (kg)
(mm)
90*80*100
M-DTE 870 800*700*850 110
90*100*100
M-DTE 890 800*900*850 145
130*100*100
M-DTE 1290 1200*900*850 205
Power (kW) 9 12 18
Operating
400 400 400
Voltage (V)
2. MONTAGE
• Check that the parts of the device are complete and that no damage has occurred
during transportation.
• Place the product on a flat and solid surface and take the necessary precautions against
the risk of tipping over.
• The personnel who will provide installation and service to the device should be
experts in their field.
• The connection to the power supply must be made by an authorized person.
• Make sure that the voltage to which you connect the device is the same as the voltage
indicated on the device label.
• The grounding connection of the device must be made in accordance with the
standards and safety regulations.
• The grounding of the device must be connected to the grounding line on the nearest
panel of the electrical installation.
• The electrical connection of the device must be made in accordance with the
applicable regulations and rules in relation to the main fuse and fugitive current fuse.
3. GENERAL WARNINGS
• Do not install the device near the environment where flammable and explosive
materials are located.
• Use a fire extinguisher by switching off the gas valves and electrical switches (if
any) when there is a fire, flame or the like in the area where the device is being used.
Never use water to extinguish the flame.
• Damages due to lack of grounding connection will not be covered by warranty.
• Do not place heavy objects on the device.
4. USAGE OF THE DEVICE
• Before using for the first time, clean the inner and outer surfaces of the device with a
cloth soaked in warm soapy water.
• Turn on the main switch.
• Turn the thermostat knob to the desired temperature.
• Open the roof cover during water filling.
• Open the water inlet valve on the front panel to allow water to fill the pan.
• You can empty the cooked food in the pan by turning the pan tilting wheel clockwise.
• After the food is empty, turn the tilting pan counterclockwise and bring the pan to a
sitting position.
• When cleaning, be careful not to let water enter the device control panel.
6. TROUBLESHOOTING
NO PRODUCT PRODUCT
CODE NAME
1 TOP PLATE
2 CHIMNEY
3 MECANIZM
4 LID
6 PRONT PANEL
7 TRAY
9 STEERING WHEEL
10 ROTIL FOOT
11 CHASSIS
12 THERMOSTAT
14 SWITCH
15 BUTTON
17 REAR PANEL
9. ELECTRICAL CIRCUIT SCHEME
WARNING SIGNS
Risk of electric shock. See the instructions in the Wipe the exterior of the
manual. device with a wet soapy cloth.
Grounding If your device has any damage to the power Do not operate your device
supply cable, an electrical shock may occur. without oil or water.