Professional Documents
Culture Documents
906977-001 WWC User Manual Booklet Rev1
906977-001 WWC User Manual Booklet Rev1
Calculator
User Manual
Great care has been taken in the preparation of this manual however
Tokheim shall not be liable for any misunderstanding, errors and/
or loss or defect arising from the use of this manual.
Tokheim shall not be liable for damage to the product, nor for
personal or third party injury, caused by incorrect use of the product
or by attempts to maintain or to repair the product by parties other
than those fully trained by Tokheim or by its accredited third party
representatives.
REVISION RECORD
Issue A
CONTENTS
1 THE TOKHEIM WWC T1 CALCULATOR ........................................... 4
1.1 Using the Keypad for Configuration .................................................. 4
1.2 Basic Keypad Functions ..................................................................... 5
1.3 Basic Programming Principle ............................................................. 5
2 MODES OF DISPENSER OPERATION ................................................. 6
2.1 Application specific requirements ...................................................... 6
2.2 How to Change the Mode of Dispenser Operation ............................ 7
3 HOW TO CHANGE THE UNIT PRICES ............................................... 8
4 HOW TO READ THE ELECTRONIC TOTALS ................................... 9
5 HOW TO SET THE PIN CODE FOR THE FIRST TIME................... 10
6 HOW TO CHANGE THE PIN CODE ................................................... 11
Issue A
The keypad allows the user to access the following functions of the WWC:-
•Configuration e.g. selecting standalone mode or console mode, entering
Issue A
10
Set Unit Prices
1
Read totals
2
Set Password
4
Maintenance
5 Functions
6 Configuration
Functions
Note : Console settings will always have priority over standalone dispenser settings.
e.g. If a standalone dispenser is programmed with unit prices then changed to console
mode, these prices will be lost and the dispenser will default to the console unit
prices.
In order carry out the basic set up of the WWC, the dispenser must be placed in
standalone mode. This procedure must only be carried out by Tokheim authorised
personnel.
Store all
nozzles
Configuration
ON c o nF
Mode of Operation
6 c t r L
Configuration
ON c onF
Unit Price
Un I t
10
Pr I cE
1
Î
7
0500 8 to modify the row/line to modify the value
9
Change the Unit Price for product 2, right side (side A)
Pr od 2
Ð 7
r I GH t
0800
Enter the price for product 2 as described above.
Repeat the procedure for products 3,4,5 as applicable.
Copy Unit Prices from the right side to the left side
c oPY
Ð 7
r t oL
YES
If the unit prices are the same for both dispenser sides, select yes to
confirm the copy process
Í0 ConF
EEP r o
OFF S t o r E Toggle yes (save PIN code) and no (exit without save)
9
YES
Ð Exit Configuration
7
Configuration
ON c o nF
Read Totals
2
t o t AL
Í0 Ð 7
Ð 7
- - - - - - - - - - - -
- - - - - - - - - - - -
- - - - - - - -
Lift a nozzle to read subtotals for
that nozzle
Í0
Pulser totals Per pulser per side (RPU1 to RPU6 then LPU1 to LPU6)
PUL SE r
Ð 7
t o t AL Î 8
257
r PU1
Ð 7
478
r PU2
Í0
Hose totals Per hose per side (RHO1 to RHO6 then LHO1 to LHO6)
Ð Ð
Ho SE
7
t o t AL Î 8
897
7
942 Í0
r Ho 1 r Ho 2
Dispenser totals Total volume per product (p1 to max. no. of products)
d I SP
Ð 7
t o t AL Î 8
3043
p 1
Ð 7
3043
t vo
Í0
Issue A
Configuration
Í0 c o nF
ON c o nF
P I ncd
4
Configuration
c o nF
Ð Exit Configuration
Issue A
Configuration
Ð 7
c o nF
P I ncd
4
Configuration
c o nF
Issue A
Ð Exit Configuration
7
Issue A