Professional Documents
Culture Documents
333-95-0101 01 GFS-220 QG en
333-95-0101 01 GFS-220 QG en
Clearing jams
If notes become jammed in the transport: GFS-220 and GFS-220F Quick Guide
1. Open the top cover and remove any notes from the upper transport.
1. Getting started
Attention
For safety information and detailed guidance on using and configuring the machine, refer to the
GFS-220 and GFS-220F User Guide. For assistance, send an email to DL_Desk_Top_Product_
Portsmouth@uk.glory-global.com.
2. Raise the feeder and remove the bundle of notes from the feed hopper.
2. Select a currency.
3. Close the top cover firmly afterwards, lifting the handle as you do so.
4. Open the middle section, using the green release levers, and remove any notes
from the lower transport.
333-95-0101_01
Glory Global Solutions is part of GLORY LTD.
This document is for general guidance only. As the Company’s products and services are continually being developed it is important for customers to check that the information contained
herein includes the latest particulars. Although every precaution has been taken in preparation of this document, the Company and the publisher accept no responsibility for errors or
omissions. The Company and the publisher accept no liability for loss or damages resulting from the use of the information contained herein. This document is not part of a contract or licence
save insofar as may be expressly agreed. All capabilities and capacity and throughput figures are subject to note size, note quality and process used. GLORY is a registered trademark of
Date: 23 March 2018
GLORY LTD. in Japan, the United States of America, and EU. All trademarks are owned by the GLORY Limited Group of companies. © Glory Global Solutions (International) Limited 2018. Document Number: 333-95-0101_01
4 1
2. Feeding notes 5. Cleaning the machine
Attention Attention
Fan notes before feeding to separate them. This is especially important with new notes. We do not recommend the use of compressed air in cleaning.
Always use the note guides. They ensure that the notes are straight as they enter the feeder. Dust inhalation may pose a risk to your health and the dust is flammable.
Never feed notes that are torn, folded or held together with staples, paper clips or elastic bands. The propellant gases can be combustible and potentially explosive.
1. Place notes on the feed hopper and, in manual start mode, press the key. To clean the machine, use a damp lint-free cloth to wipe the screen, presence
Pressing the key again stops the machine. sensors and detectors highlighted below. Clean all the casings and rollers.
If required, mix a small amount of liquid soap with the water.
2. Feed rejected notes again, if required, to separate notes rejected for different reasons.
2 333-95-0101_01 333-95-0101_01 3