Professional Documents
Culture Documents
Df010d View of
Df010d View of
Compact 7.2V Li-ion Battery with High Performance Cordless Driver Drill
21 Torque Settings
+ Drill Mode
Mechanical Two-Speed
Gearing
Lock Button
Prevents accidental start-up. DF010D
0.3N.m (2.7inch lbs)
~3.0N.m (27inch lbs) Durable hinge mechanism
Comparison of Products
Note: 1. The test results depend to a great extent on the hardness of the material, etc.
2. Numbers in the charts below are relative values when the capacities of Competitor "P" is indexed at 100.
Driving 3.8 x 38 mm Coarse threads into melapi Driving 3.8 x 45 mm Countersunk head wood screws into melapi
Work Amount Work Amount
Work Efficiency on a single full battery charge Work Efficiency on a single full battery charge
Makita DF010D 115 Makita DF010D 165 Makita DF010D 120 Makita DF010D 170
Competitor 115 Competitor 105 Competitor Competitor
"H" "H" "H" 120 "H" 105
Competitor Competitor Competitor Competitor
"D" 80 "D" 55 "D" 75 "D" 50
Competitor 100 Competitor Competitor 100 Competitor
"P" "P" 100 "P" "P" 100
0 50 100 150 200 0 50 100 150 200 0 50 100 150 200 0 50 100 150 200
slow fast few many slow fast few many
Carrying Case
Standard Equipment Fast Charger, Battery Cartridge, Bit set
Items of standard equipment and specifications may differ by country or area.
Makita Corporation
3-11-8 Sumiyoshi-cho, Anjo, Aichi, 446-8502 Japan
PRINTED IN JAPAN Z23377-2 AI-AE
Cordless Driver Drill High fastening torque accuracy
1 Two auto stop systems
DF010D Auto-stop system (on detection of remaining battery power)
LED job light blinks and goes out when the battery power
is almost used up during use.
If the battery power reduces further, the motor automatically
stops to prevent incomplete fastening.
Auto-stop clutch
The motor automatically stops at the moment when the clutch is disengaged.
- Surplus impact does not occur.
- Stable fastening condition at workpiece can be got in continuous fastening.
- Battery power can be saved.
Blinking of LED job light advises
- Life of clutch is improved. the user to recharge the battery.
550g
with battery
Ergonomically designed
rubberized soft-grip
provides more comfort and
control Convertible
Can be used LED job light Mechanical two speed Compact 7.2V Li-ion Battery unrivaled
as a hand screwdriver for illuminated operation work amount on a single full battery charge
in comparison with competitor's 3.6V battery
Battery
BL7010
OFF ON
Lock the Bit can be turned on/off with Rotation speed is selectable Charger DC07SA
Convertible to a manual an independent switch. to workpiece or screw size. Use of the cartridge-type Li-ion battery allows
Screwdriver simply. The light will automatically for compact and lightweight tool design.
turn off after 5 minute. Chargeable at approx. 30 minutes
Full-scale with Charger DC07SA .