The document is an air compressor inspection checklist used by Trojan General Contracting LLC to ensure health, safety, and environmental compliance. It contains 15 check points to inspect the air compressor's startup procedure, for leaks, hose and pressure gauge conditions, safety valves, drainage, joints, the air receiver for cracks, lubrication levels, emergency stopping abilities, belts/pulleys, emissions, wheels, and safeguarding of rotating parts. The inspector is to note yes, no, or not applicable responses and any remarks for each check point and sign off on the inspection.
The document is an air compressor inspection checklist used by Trojan General Contracting LLC to ensure health, safety, and environmental compliance. It contains 15 check points to inspect the air compressor's startup procedure, for leaks, hose and pressure gauge conditions, safety valves, drainage, joints, the air receiver for cracks, lubrication levels, emergency stopping abilities, belts/pulleys, emissions, wheels, and safeguarding of rotating parts. The inspector is to note yes, no, or not applicable responses and any remarks for each check point and sign off on the inspection.
The document is an air compressor inspection checklist used by Trojan General Contracting LLC to ensure health, safety, and environmental compliance. It contains 15 check points to inspect the air compressor's startup procedure, for leaks, hose and pressure gauge conditions, safety valves, drainage, joints, the air receiver for cracks, lubrication levels, emergency stopping abilities, belts/pulleys, emissions, wheels, and safeguarding of rotating parts. The inspector is to note yes, no, or not applicable responses and any remarks for each check point and sign off on the inspection.
Air Compressor Inspection Checklist Project Name:- Month:- Year- Contractor Name:- Tag No. :-
CHECK POINTS YES No NA Remarks
SL NO
1 Whether the compressor starts properly?
2 Is there leakage of diesel/ oil from tank?
3 Are the hoses been held firmly with clips / clamps?
4 Are there any damage / leak in the hoses? 5 Whether the pressure gauge shows the correct working pressure? 6 Does the safety valve release at the set pressure?
7 Does the moisture drain valve in the air cylinder functions
well?
8 Are the hose joints properly engaged? Are they prevented
from whipping in case of joint failure?
Are there any visible cracks in the air receiver?
9 10 Whether the lubrication oils topped up to required level?
11 Can the operator stop the machine in case of an emergency?
12 Are the belt & pulley condition and their alignment
satisfactory? 13 Whether Fuel consumption/smoke emission (visual) is in an acceptable level? 14 Are the wheels of air compressor in good condition?