Professional Documents
Culture Documents
Dear customer :
According to material properties and usage requirements , we
recommend you to apply the following equipment , please check !
一、Produce Taste special point
1
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
实 验 砂part
磨 illustrate
机 Rod-pin grinding structure design; materials are efficiently ground in the range of
小型砂磨 10-14.5 meters per second linear speed, high grinding energy, narrower grinding
机 space, narrow material particle size distribution, production efficiency is more
双动力机 than 3 times that of ordinary sand mills, high performance The pin-rod high-speed
型grinding system
nano-bead mill is used for continuous or large-flow circulation ultra-fine grinding
中大型砂
磨机 of solid suspended particle materials dispersed in liquid or products with high
fineness requirements.
Dynamic large-area screen separation and dynamic and static ring
Material separation coexist, super large material flow area; less clogging
probability, high solid content, high efficiency, large production
separation capacity, and less maintenance; due to the action of dynamic
system centrifugal force, the hollow structure turbine The pin rotor and
the main shaft rotate together, and the discharge and flow
efficiency is 2-3 times that of ordinary sand mills.
Grinding inner and outer barrel cooling, mechanical seal cooling
cooling system protection system, maximum cooling area, good material temperature
control effect and longer life.
Grinding chamber components can be made of silicon carbide,
polyurethane, zirconia, and alloy steel, with low friction
coefficient. Cylindrical, airtight, equipped with interfaces for
Grinding barrel adding and discharging grinding media, connected with the frame by
bolts, the jacket of the grinding barrel can be cooled, if there
are special requirements, a powerful cooling device is designed at
the discharge end cover and the separator, Effectively control
material temperature.
It is powered by a three-phase motor and driven by a V-belt.
Explosion-proof requirements can be selected according to customer
drive unit products . The tension of the V-belt can be increased through the
manual screw operating device , and the bottom plate is locked
with two lead screws and nuts after the belt is tensioned.
Pneumatic diaphragm pump feeding system, good suction, can
feed system automatically stop feeding when the grinding barrel is blocked,
and will not generate excessive feeding pressure.
control Panel Includes operation buttons for sander and pump, display gauges.
2
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
Product outline drawing (for reference only, the actual product shall prevail)
二、technology surgery ginseng number
1. Basic equipment configuration:
·Net capacity 2 liters
·Separator form screen separator
·Separator clearance Can be configured according to the size of
the customer's zirconium beads
·Cooling water flow about 4000 liters/hour
·Cooling water temperature 8-12 degrees cold water or tap water
·Cooling water pressure 0.4Mpa
·Cooling water inlet and outlet 1 inch diameter hose
·Inlet pressure gauge 0.2Mpa
·Outlet temperature gauge 0- 100 degrees (adjustable)
3
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
·Feed form delivery by pump
·Color /Style Subject to actual production
2. Feed form
·Material pump model Ingersoll Rand 0.5 inch pneumatic diaphragm
pump
.Material Polypropylene
3. Price terms
serial
numb Unit price
er device name Specification quantity (yuan) Amount (yuan) Remark
1 pin sander QWSX2L 1 set 85000.00 85000.00 Contains two 10L
mixing tanks
2 Zirconia ball Ф 0.3-0.4MM 5KG 240.00 1200.00 Contains 2KG added
ball weight
3 refrigerator 2P 1 set 8500.00 8500.00
4 air compressor 0.3 cubic 1 set 4500.00 4500.00
5
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
5 Total price: 99,200 yuan (including 13% tax stamp and freight)
1. Payment terms: 40% of the total payment in advance, the contract takes effect,
and 60% of the payment before delivery,
2. Ownership of the buyer: Before the payment for the equipment is paid off, we
have the ownership of the equipment.
3. Production period: within 15 days after signing the contract.
5. Company introduction
6
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
Zibo Venus New Materials Co., Ltd. was founded in 1997 with a registered
capital of 42.9 million yuan and more than 300 employees. It covers an area
of about 180 acres, and technical personnel account for about 35%. It
integrates R&D, manufacturing, promotion and application and technical
services. A national high-tech water enterprise. It has subsidiaries Shandong
Hechuang Mingye Fine Ceramics Co., Ltd., Shandong Yilaisheng New Material
Technology Co., Ltd., and Zibo Xingao New Material Research Institute Co.,
Ltd. The company was listed on the New Third Board in 2017, stock code:
870601, and is one of the top 50 innovative high-growth enterprises in Zibo
City.
The company has intelligent ultra-fine grinding equipment (sand mill,
high-speed mill, stirring mill, ball mill, polyurethane elastomer products,
etc.), wear-resistant ceramic series (alumina, zirconium silicate, zirconium-
aluminum composite, zirconia and other wear-resistant ceramic grinders)
media; alumina, zirconium-aluminum composite, zirconia and other wear-
7
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
resistant ceramic lining plates; bulletproof ceramic plates, etc.), high
temperature resistant composite material series (ZrC-SiC ceramics, carbon
fiber toughened ZrC-SiC high temperature resistant and heat-resistant
composite materials, high entropy ceramics and other composite materials) and
mineral processing wear-resistant equipment accessories (ceramic lining
cyclone, porcelain lining pipe, three-in-one/two-in-one vulcanized ceramic
plate, etc.), which are widely used in electronic materials, mineral
processing, advanced Ceramic materials, coatings, plastics, food, ink,
battery cathode materials, zirconium silicate, titanium dioxide, electric
power, steel, carbon, medicine , non-metallic minerals, chemicals, aerospace
and other industries. Adhering to the concept of excellent products and
sincere service, the company has established a complete product standard
quality service system. The products are exported to Southeast Asia, South
Korea, Japan, South Africa, Australia, Europe and the United States, and are
well received by domestic and foreign users. Relying on a strong R&D team and
standardized management, it has successfully passed the "three systems"
certification of quality, environment, and occupational health and safety
management. It has 1 national key new product, formulated 1 national standard
and 1 industry standard, and has successively undertaken many major
provincial and municipal projects such as major scientific and technological
innovation projects in Shandong Province. The company attaches great
importance to the construction of scientific and technological innovation
platforms and industry-university-research cooperation. Together with Harbin
Institute of Technology, Australia Aokai, and HC Company, it has established
an inorganic non-metallic material research and development institution,
Xingao New Materials Research Institute, and established 17 professors and
researchers including Chen Daming. An expert committee formed to provide
scientific research support. Established 5 joint laboratories and personnel
8
Zibo start Star new material Shares
have limited company
land site : Zibo City High-tech Zone Shang
4678 Gong Road
electricity talk: 0533-3110125
Fax: 0533-3110983
training and achievement transformation bases with Beijing Institute of
Aeronautical Materials, Shanghai Institute of Ceramics, Chinese Academy of
Sciences, Harbin Institute of Technology, Tianjin University, Shandong
University of Technology and other domestic universities and colleges. While
the company develops, it provides technical support and services for the same
industry. The company adheres to the spirit of adhering to integrity and
innovation, with a global vision and diversified development strategies,
promotes the integration of innovative elements, makes breakthroughs in key
technologies, accelerates the transformation of innovative achievements, and
leads the development of the industry.
Intelligent ultrafine powder grinding equipment company has excellent
production equipment:
1、2 automatic welding robots
4、1 6KW laser cutting machine, 1 CNC plasma cutting machine, 1 CNC
engraving machine
Now it produces more than 500 sets of various micro-nano powder grinding
equipment, more than 50 tons of wear-resistant polyurethane products, and
more than 20,000 tons of wear-resistant ceramic products.
10