Professional Documents
Culture Documents
Equipment Painting
Equipment Painting
Consecutive temperature
SDS Désignation
Number
Normal
422 001 Duct from ID fan to mill inlets 315
422 002 Duct from ID fan to Bag Filter(bypass) 120
422 003 Duct from Mill outlet to cyclones 120
422 004 Duct from Cyclones to raw mill fan 120
422 005 Duct from Raw mill fan outlet to bag filter 120
422 006 Duct fromCycle duct(raw mill fan outlet to raw mill inlet) 120
511 001 Duct from Bag Filter to Main bag filter fan 200
511 002 Duct from Main bag filter fan outlet to chimney 200
531 04 ID FAN 320
531 002 Duct from C1 outlet to ID fan 320
Remarks:
The insulation area and the amount of insulation materials in the
table are all theoretical quantities, excluding other spare
amounts.
Operating
temperature Choosed Thickness for Heat
Preservation Layer (mm)
Design
320 150
315 150
150 100
150 100
150 100
150 100
150 100
150 100
150 100
250 100
250 100
150 100
240 100
230 100
450 150
450 150
450 150
437.5 150
120 100
120 100
120 100
285 100
285 100
450 150
450 150
120 100
120 100
120 50
430 150
120 50
120 100
120 100
120 100
450 150
230 100
450 150
120 100
350 150
150 100
150 100
450 150
350 150
100 100
100 100
100 100
350 150
100 50
100 50
430 150
150 100
100 100
450 150
450 150
100 50
TOTAL
als in the
pare