Professional Documents
Culture Documents
22
Link-Belt™Elevator Buckets
23
Link-Belt™ Elevator Buckets
24
Link-Belt™ Elevator Buckets
25
Link-Belt™ Elevator Buckets
Type MF Continuous Elevator Buckets are made of welded
steel for mounting on chains or belts. They have medium
fronts and are used for handling a variety of materials. The
smooth interior provides a quick, clean discharge of material.
Buckets are of formed and welded steel construction. The
front plates are either intermittent or continuous welded to the
back and side plates, depending on the fineness of the
material being handled.
Elevator Bolts
Elevator Bolts are made to ANSI specifications and are held
to exacting tolerances. We offer our SABRE-TOOTH HEAD®
in carbon steel only.
Elevator bolts are “Low Shoulder” design to accommodate
requirements for use on today's ultra-thin belting.
Plain finish and zinc plated carbon steel in stock.
RELIENCE
#3, Carbon Steel
STANDARD SABRE-TOOTH®
#1 Norway Carbon Steel #1 Norway W/Toothed head
and Stainless Steel Carbon Steel
26
Bucket Punching for Chains
27
Bucket Punching for Chains
Centrifugal Discharge Elevator Buckets on K Attachments (continued)
28
Bucket Punching for Chains
CAUTION: Link-Belt™ Elevator Buckets must be Service Instructions accompany the shipment of
installed, operated and maintained in accordance equipment. If additional copies of Service Instructions
with accompanying FMC Technologies Service are required, they are available free of charge from FMC
Instructions. Failure to follow these instructions Technologies, Material Handling Solutions, Box 1370,
can result in serious personal injury, property Tupelo, MS 38801.
damage or both.
29
Bucket Punching for Chains
Super Compacity
Contiuous Elevator Buckets on G Attachments
30
Bucket Punching for Chains
Types AA and SC
Centrifugal Discharge Elevator Buckets on
A and B Wing Attachments
31
Bucket Punching for Belts
32