Professional Documents
Culture Documents
DOWNLOAD
Page content
What is MMC?
Conclusion
Related Readings
The concept of GD&T bonus tolerance is very important for a mechanical design engineer, especially for those who are designing parts fitting
together such as a shaft and its mating component.
DOWNLOAD
Add the extension
Geometric Dimensioning and Tolerancing Bonus Tolerance – Example and Applic…
Ideal Scales
Ideal Scales
Check out Our Up-To-Date Selection of Scales from
Major Brands. Place Your Order Today!
Website Directions
What is MMC?
When a component consists of maximum amount of materials it could possibly carry then the component is said to be in MMC condition. For a
shaft and hole base system, a shaft will be in MMC when it has the maximum diameter and a hole will be in MMC when it has minimum diameter.
In the above figure the size of the hole can vary from 10.2 to 10.5. And at 10.2 it will be in MMC.
Dutch (Proficient/C1)
Use the Dutch (proficient/C1) test to hire editors, writers, customer success man…
TestGorilla
Observe the GD&T control frame. The meaning of the GD&T symbol is: “a positional tolerance of 0.2 is applicable to the hole when it is at the
maximum material condition (MMC)”.
You already know that MMC for the hole will have the diameter of 10.2 and at this condition there should have a positional tolerance of 0.2 means
for inspecting the hole you should use a gauge of diameter 10. All the holes that allow the 10 diameter gauge to enter should pass the quality
checks.
At MMC the maximum clearance available between the gauge and the hole is 0.2, so available tolerance at MMC is 0.2.
Now as per the given dimension the hole diameter can vary from 10.2 to 10.5, and as the hole size increase the tolerance available between the
gauge and the hole also increases. At MMC the maximum available tolerance will be equal to
Critical Thinking Test
This online critical thinking screening test evaluates candidates' skills in critical t…
TestGorilla
10.5 – gauge diameter = 10.5 – 10 = 0.5. Out of which specified positional tolerance is 0.2 so the bonus tolerance will be (0.5 – 0.2) = 0.3.
Conclusion
Bonus tolerance is a important concept in GD&T. Bonus tolerance will be available for the geometric dimensioning and tolerancing feature of size
with MMC or LMC modifiers. The bonus tolerance reduces the number of rejected parts by increasing the tolerance zone.
Related Readings
**GD&T Tutorial – Learn How to Identify the Feature of Size Dimension:**This GD&T tutorial will talk about the concept of feature, feature of
size, non-feature of size and also about the application and identification of the geometric dimensioning and Tolerancing concept in engineering
drawing.
**GD&T Tutorial on Projected Tolerance:**This geometric dimensioning and Tolerancing or GD&T tutorial will discuss about projected
tolerance, its application and benefits for preparing engineering drawing.
report this ad
Search
Categories
Cad and autocad (191)
Robotics (44)
Thermodynamics (45)
Latest Article
Tags
| | | Terms of Use