Professional Documents
Culture Documents
CIDCO 2015 16 Final Mail
CIDCO 2015 16 Final Mail
EXCAVATION
Excavation…
ITEM -
DESCRIPTION 2015 – 2016 UNIT
CODE
/1/
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015 – 2016 UNIT
CODE
(Lift from 1.5 to 3.0m.)
Notes :
1) All payments towards fees, taxes etc. shall be borne
by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for
Royalty Payment
Spec. No.: Bd.A.1-6 Page No. 21
(A) By Manual Means
i) earth, soil of all types, sand, gravel and soft murum
ii) Hard Murum 149.00 Cum.
iii) Hard Murum and boulders
iv) Soft rock
169.00 Cum.
v) In hard rock (controlled blasting)
183.00 Cum.
Note : Excavated Rock will be Contractor‟s property.
406.00 Cum.
Agency will be solely responsible for Royalty Payment.
600.00 Cum.
(B) By Mechanical Means
i) earth, soil of all types, sand, gravel and soft murum 117.00 Cum.
ii) Hard Murum 131.00 Cum.
iii) Hard Murum and boulders 143.00 Cum.
iv) Soft rock 280.00 Cum.
EXBD-003 Dewatering the excavated trenches and pools of water in
the building area by using pumps and other devices,
including disposing of the water to a safe distance as
directed.
a) By using 3 H.P. Pumps. 53.50 1 Hr.
b) By using 5 to 9 H.P. Pumps. 76.00 1 Hr.
c) By using 10 to 19 H.P. Pumps. 100.60 1 Hr.
EXBD-004 Filling in plinth and floors with approved excavated 58.00 Cum.
material in 15cm to 20cm layers including watering and
compaction complete.
Spec. No.: Bd.A.10 Page No. 18
EXBD-005 Filling in plinth and floors with contractor's murum in 363.70 Cum.
15cm to 20cm layers including watering and compaction
complete.
Spec. No.: Bd.A.10 Page No. 18
/2/
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015 – 2016 UNIT
CODE
EXBD- Royalty Charges for murum, and ordinary earth to be 141.34 Cum.
005A used for Embankment and filling etc. for Item No. ____
above as directed by Engineer.
EXBD-006 Providing dry trap/rubble stone soling 15 cm to 20 cm 950.00 Cum.
thick including hand packing and compacting etc.
complete.
Spec. No.: Bd.A. 12 Page No. 19
EXBD-007 Providing and filling in the foundation with sand of 1254.00 Cum.
approved quality including watering, compaction etc.
complete.
Spec. No.: Bd.A.13 Page No. 20
EXBD-008 Providing soling using 80mm size trap metal in layers of 1057.00 Cum.
15cm each including filling voids with sand, ramming,
watering etc. complete.
Spec. No.: As directed by Engineer in charge.
/3/
CIDCO SCHEDULE OF RATES : 2015-2016
PILE FOUNDATION
Pile Foundation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
PF-001 Providing ____RCC cast in situ bored piles as per mix
designs with a provision related to cement content as
specified in IS 456 – 2000, each of load as per design and
of specified diameter or as directed, placed through steel
shell sunk to the required depth through all strata except
rock, excluding provision of reinforcement, including
placing concrete by tremie arrangement, compaction of
concrete and withdrawal of shell including chipping,
dressing of RCC piles cleaning the reinforcement etc.
complete.
Spec. No.: Bd-B-2 Page 30
(A) M-25
a) 325 mm diameter 1122.00 Rmt.
b) 350 mm diameter 1151.00 Rmt.
c) 400 mm diameter 1348.00 Rmt.
d) 450 mm diameter 1443.00 Rmt.
e) 500 mm diameter 1758.00 Rmt.
f) 550 mm diameter 1989.00 Rmt.
g) 600 mm diameter 2223.00 Rmt.
(B) M-30
a) 325 mm diameter 1142.00 Rmt.
b) 350 mm diameter 1213.00 Rmt.
c) 400 mm diameter 1396.00 Rmt.
d) 450 mm diameter 1495.00 Rmt.
e) 500 mm diameter 1812.00 Rmt.
f) 550 mm diameter 2067.00 Rmt.
g) 600 mm diameter 2315.00 Rmt.
(C) M-35
a) 325 mm diameter 1153.00 Rmt.
b) 350 mm diameter 1244.00 Rmt.
c) 400 mm diameter 1420.00 Rmt.
d) 450 mm diameter 1521.00 Rmt.
e) 500 mm diameter 1828.00 Rmt.
f) 550 mm diameter 2106.00 Rmt.
g) 600 mm diameter 2361.00 Rmt.
/4/
CIDCO SCHEDULE OF RATES : 2015-2016
Pile Foundation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
PF-002 Chipping and dressing of the RCC piles upto 0.60 meter 240.00 No.
including cleaning reinforcement and removal of
dismantled materials etc. for providing pile caps.
Spec. No.: As directed by Engineer-in-charge
PF-003 a) Providing Bentonite slurry process Upto 650 mm 135.00 Rmt.
dia. Piles
Spec. No.: As directed by Engineer-in-charge
PF-004 Chiselling through pile shells in hard strata like boulders,
soft and hard rocks including removing and stacking the
loose materials etc. complete and disposing of the
unserviceable materials outside etc. complete. Spec. No.:
As directed by Engineer in charge.
1) upto and inclusive of 550 mm diameter 416.00 Ring Hour
2) Beyond 550mm and upto & inclusive of 650 mm dia 555.00 Ring Hour
3) Beyond 650mm and upto & inclusive of 900 mm dia 691.00 Ring Hour
4) Beyond 900mm and upto & inclusive of 1050mm dia 1083.00 Ring Hour
PF-005 Carrying out load test for 1.5 times the proposed safe
working load on the pile in driven position upto---- dia
including construction of test cap, use of accessories and
instruments including providing graphs as per IS code or
Std. Specifications and dismantling the cap etc. and
cleaning the site etc. complete.
Spec. No.: As directed by Engineer in charge.
a) upto 400 mm diameter 40800.00 No.
b) above 400 mm to 550 mm diameter 49300.00 No.
c) above 550 mm to 650 mm diameter 59700.00 No.
PF-006 Carrying out boring for ----- dia bored RCC cast in situ
piles including withdrawal of shell, removal of earth to
distance of 50 m etc. complete.
Spec. No.: As directed by Engineer in charge.
a) for 325 to 400 mm diameter 380.00 Rmt.
b) for 425 mm to 500 mm diameter 425.00 Rmt.
c) for 525 mm to 600 mm diameter 440.00 Rmt.
/5/
CIDCO SCHEDULE OF RATES : 2015-2016
/6/
CIDCO SCHEDULE OF RATES : 2015-2016
/7/
CIDCO SCHEDULE OF RATES : 2015-2016
/8/
CIDCO SCHEDULE OF RATES : 2015-2016
/9/
CIDCO SCHEDULE OF RATES : 2015-2016
/ 10 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 11 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 12 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 13 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 14 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 15 /
CIDCO SCHEDULE OF RATES : 2015-2016
BRICK WORKS
Brick Works…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
BRK-001 Providing Second class Burnt Brick masonry with 4917.00 Cum.
conventional / IS type bricks in cement mortar 1:6 in
foundation and plinth of inner walls & external walls,
including bailing out water manually, striking joints on
unexposed faces, racking out joints on exposed faces and
watering etc. complete.
Spec. No.: Bd.G. 1 Page No. 265
BRK-002 Providing Second class Burnt Brick masonry with 4984.00 Cum.
conventional / IS type bricks in cement mortar 1:6 in
superstructure, including bailing out water manually,
striking joints on unexposed faces, racking out joints,
scaffolding etc. complete.
Spec. No.: Bd.G.5 Page No. 268
BRK-003 Providing Second class Burnt Brick masonry with 675.00 Sqm.
conventional / IS type bricks in cement mortar 1:4 in half
brick thick wall including mild steel longitudinal
reinforcement of 2 bars of 6mm dia / 2 hoop iron strip
25mm x 1.6mm painted with anticorrosive paint at every
third course properly bent and bonded at ends,
scaffolding, raking out joints and watering etc. complete.
Spec. No.: Bd.G.7 Page No. 269
BRK-004 Providing Second class Burnt Brick masonry with 5086.00 Cum.
conventional / IS type bricks in cement mortar 1:4,
including scaffolding, raking out joints and watering in
pillars of rectangular or square shapes as shown in the
drawings etc. complete.
Spec. No.: Bd.G.10 (a) Page No. 271
BRK-005 Providing Second class Burnt Brick masonry with 5115.00 Cum.
conventional / IS type bricks in cement mortar 1:4,
including scaffolding, raking out joints and watering in
pillars of curved shape as shown in the drawings etc.
complete.
Spec. No.: Bd.G.10 (b) Page No. 271
/ 16 /
CIDCO SCHEDULE OF RATES : 2015-2016
Brick Works…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
BRK-006 Providing Second class Burnt Brick masonry in cement 5130.00 Cum.
mortar 1:6 using flyash bricks in foundations and plinth of
inner walls and external walls, including bailing out water
manually, striking joints on unexposed faces, racking out
joints on exposed faces and watering etc. complete.
Spec. No.: As directed by Engineer in charge
BRK-007 Providing Second class Burnt Brick masonry in cement 5189.00 Cum.
mortar 1:6 using flyash bricks in super structure including
striking joints, racking out joints, watering and scaffolding
etc. complete.
Spec. No.: As directed by Engineer in charge
BRK-008 Providing Second class Burnt Brick masonry in cement 810.00 Sqm.
mortar 1:4 using flyash bricks in half brick thick wall
including mild steel longitudinal reinforcement of 2 bars
of 6mm dia./2 hoop iron strips 25mm x 1.6mm at every
third course, properly bent and bounded at ends
scaffolding, racking out joints and watering etc. complete.
Spec. No.: Bd. G. 7 Page 269
BRK-009 Providing Second class Burnt Brick masonry in cement
mortar 1:4 using flyash bricks including scaffolding,
racking joints and watering in pillar of _______ as shown
in the drawing etc. complete.
a) Rectangular or square 5086.00 Cum.
b) Curved (I-8) 5443.00 Cum.
/ 17 /
CIDCO SCHEDULE OF RATES : 2015-2016
STONE MASONRY
Stone Masonry…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
STM-001 Providing un-coursed rubble masonry of trap stones in 2930.00 Cum.
cement mortar 1:6 in foundation and plinth of inner wall
including bailing out water manually, striking joints on
unexposed faces and watering etc. complete.
Spec. No.: Bd.H.1 Page No. 293
STM-002 Providing un-coursed rubble masonry of trap stones in 3260.00 Cum.
cement mortar 1:6 in super structure including racking out
joints when plastering is to be done/ striking joints,
watering and scaffolding etc. complete.
Spec. No.: Bd.H.4 Page No. 296
STM-003 Providing un-coursed rubble masonry of trap /granite / 3576.00 Cum.
quartzite / gneiss stone in cement mortar 1:3 in basement
with patent water proofing compound added to it at rate
of 1 kg per bag of cement including bailing out water,
scaffolding racking out joints when plastering is to be
done and watering complete.
Spec. No.: Bd.H.3 Page No. 294
STM-004 Providing coursed rubble 2nd sort masonry using all stones 6201.00 Cum.
of full height in each course of trap stones in cement
mortar 1:6 in external walls of plinth, including striking
joints, raking out joints, watering etc. complete.
Spec. No.: Bd. H.11 Page No. 298
STM-005 Providing coursed rubble 2nd sort masonry using all stones 6460.00 Cum.
of full height in cement mortar 1:6 in super structure
including racking out joints when plastering is to be done/
striking joints, watering and scaffolding etc. complete.
Spec. No.: Bd.H.12 Page No. 298
STM-006 Providing coursed rubble 1st sort masonry of trap stones in 6852.00 Cum.
cement mortar 1:6 in superstructure external walls of plinth,
including scaffolding, striking joints, raking out joints,
watering etc. complete.
Spec. No.: Bd.H.14 Page No. 299
STM-007 Providing coursed rubble 1st sort masonry for pillar of trap 6955.00 Cum.
stones in cement mortar 1:6 including pointing with cement
mortar 1:3 scaffolding and watering etc. complete.
Spec. No.: Bd.H.40 Page No. 299
/ 18 /
CIDCO SCHEDULE OF RATES : 2015-2016
Stone Masonry…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
STM-008 Providing random rubble masonry second sort of trap / 3012.00 Cum.
granite / quartzite / gneiss stones in cement mortar 1:6 in
plinth including bailing out water , striking joints on
unexposed faces. (Excluding pointing) complete.
Spec. No.: Bd.H.5 Page No. 296
STM-009 Providing random rubble masonry 2nd sort of trap stones 3225.00 Cum.
in cement mortar 1:6 in super structure including racking
out joints when plastering is to be done on the inside /
striking joints, watering and scaffolding etc. complete.
Spec. No.: Bd.H.6 Page No. 296
/ 19 /
CIDCO SCHEDULE OF RATES : 2015-2016
BLOCK MASONRY
Block Masonry…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
BLK-001 Providing and laying I.S. standard cement concrete hollow 508.00 Sqm.
block 400 X 200 X 100 mm in cement mortar 1:6 for super
structure including raking of joints, when plastering is to be
done/striking joints when plastering is not to be done,
curing and scaffolding etc. complete.
Spec. No.: Bd.I.1 Page No. 349
BLK-002 Providing and laying I.S. standard cement concrete hollow 717.00 Sqm.
block 400 X 200 X 200 mm in cement mortar 1:6 for super
structure including raking out joints, when plastering is to
be done/striking joints when plastering is not to be done,
curing and scaffolding etc. complete.
Spec. No.: Bd.I.1 Page No. 349
BLK-003 Providing and constructing 1:5:8 cement concrete solid 3747.00 Cum.
block 300 X 200 X 150 mm in cement mortar 1:6 for
external walls including raking out joints, when plastering is
to be done/striking joints when plastering is not to be
done, curing and scaffolding etc. complete.
Spec.No.:As directed by Engineer in Charge.
/ 20 /
CIDCO SCHEDULE OF RATES : 2015-2016
WATERPROOFING
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WP-001 Providing and laying damp proof course 50 mm thick M- 274.00 Sqm.
20 cement concrete layer and bitumen using cement with
approved water proofing compound at the rate of 1 kg.
per 50 kg. of cement etc. complete.
Spec. No.: Bd.J.2 Page No. 337
WP-002 Providing and applying Bitumen layer at 2 kg/square 149.00 Sqm.
meter over terrace structural slab including cleaning the
surface for water proofing complete.
Spec. No.: Bd.J.3 Page No. 338
WP-003 Finishing the terrace slab integrally mixed with water 238.00 Sqm.
proofing compound in cement mortar 1:3 proportion with
20mm thick layer, including curing, finishing using
approved waterproofing compound at rate of 1 kg per 50
kg. of cement etc. complete.
Spec. No.: As directed by Engineer-in-charge
WP-004 Providing and laying water proofing treatment of 112 mm 474.00 Sqm.
av. thickness consisting of 12 mm thick layer in Cement
Mortar 1:3 with water proofing compound at the rate of
One Kilograme per bag of cement as base, constructing
and laying brick bat coba in cement mortar 1:5 with
waterproofing compound at the rate of One Kilogramme
per bag of cement and having average thickness of 80mm
and finishing with 20mm thick cement plaster layer in
cement mortar 1:3 with approved water Proofing
compound at the rate of One Kilogramme per cement
bag, including all lead, lifts and laid to proper slope to
drain of water entirely including Watta at the junction of
parapet and work upto a height of 300 mm or as directed
and including finishing the top layer of water proofing
treatment with false marking of 30cm x 30cm or as
directed and covering the whole treatment with seven
year‟s guarantee, on requisite stamp paper etc. complete.
Spec. No.: As directed by Engineer in charge.
WP-005 Providing leak proof treatment by injection grouting 21.00 Ltr.
method to old floor without removing tiles of W.C./Bath
with approved water proofing compound and cement
/ 21 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
solution (fine sand, cement etc.) without breaking tiles
making holes, refilling and making them water tight
including making good the damages, cleaning etc.
complete.
Spec. No.: As directed by Engineer in charge
WP-006 Removing existing water proofing treatment from terrace 259.00 Cum.
including I.P.S./brick bat coba etc. without damages to
structure, levelling and cleaning the surface for providing
new specialized water proofing treatment complete as
directed.
Spec. No.: As directed by Engineer in charge.
WP-007 Providing waterproof plaster in W.C. and bath 20mm 240.00 Sqm.
thick for dado in cement mortar 1:3 with neat finishing,
floating using approved water proofing compound at the
rate of One Kg. of cement.
Spec. No.: As directed by Engineer-in-charge
WP-008 Providing waterproofing in W.C. and bath including brick 2790.00 Cum.
bat coba in all positions consisting of specialized materials
as per manufacturer‟s specifications and covering 7 years
guarantee including all leads, lifts etc. complete.
Spec. No.: As directed by Engineer-in-charge
WP-009 Providing waterproof bedding for flooring of bath and 309.00 Sqm.
W.C. 25 mm thick in cement mortar 1:3 using 1 kg. of
approved waterproofing compound per 50 kg. of cement,
including levelling, curing etc. complete.
Spec. No.: As directed by Engineer in charge.
WP-010 Removing the tar or coba and disposing of the 11.00 Sq.M.
material as directed etc. complete.
Spec. No.: As directed by Engineer in charge.
WP-011 Providing and applying water proofing treatment 607.00 Sq.M.
using acrylic polymer modified cement based water
proofing coating with fibre glass mesh mixing at the rate
of powder to liquid (2:1) by weight convering 9 to 10 sqm
/kg with two coat using Dr. Fixit or alike of chemicals for
masonry and concrete surface by brush covering 7 years
guarantee on Stamp Papers etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 22 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WP-012 Providing and laying joint less Polydee-LM, a highly 750.00 Sq.M.
flexible elastomeric coating for RCC / cementitious
surface for terrace waterproofing on B.B. Coba / R.C.C,
after application of TP-42 Primer on perfectly clean
surface (free from loose dust and foreign matter)
application of 1st coat of Polydee-LM @ 700 gms/sqm
and applying 2nd coat of Polydee-LM @ 700 gms/sqm
and finishing the same with sprinkling the AG-10 granules
on the wet coating. (After finishing covering the treatment
with 25mm cement plaster for protection with fibrillated
6mm Plyplast fibre @ 125 gms/sqm to be paid in separate
item.) covering 7 years guarantee on Court Fee Stamp
Paper of Rs. 100/- etc. complete
Spec. No.: As directed by Engineer in charge.
WP-013 Providing and applying a base coat comprising of 1 Kg 664.00 Sq.M.
Polydee-MC and 1 Kg fresh cement after wetting the
surface followed by drying the surface for 2 days, apply
primer coat of TP-40 and after drying, applying Polydee-
11 two component (mixing ratio 2 A : 1 B) ) Antibacterial
food grade coating inside drinking water tank in two coats
with time interval of minimum 8 hrs. covering 7 years
guarantee on Court Fee Stamp Paper of Rs.100/- etc.
complete.
Spec. No.: As directed by Engineer in charge.
WP-014 Providing and fixing 20 to 25 mm thick rough shahabad 797.00 Sq.M.
box type waterproofing for basement or underground
floor on a base of Cement concrete 1:3:6, including sub
base of 2.50 centimeter thick Cement mortar 1:3 with
conceal, secrete (RMW), Algae proof or other alike
waterproofing liquids, raking of joints upto 35 mm depth,
filling the joints with 6 mm size crushed metal, hand
grouting with cement slurry, curing and cleaning, with 7
years guarantee on court fee stamp of Rs.100/- with
ponding test etc complete. (excluding Cement concrete
1:3:6 base concrete ) ( prior permission of SE shall be
obtained before inclusion of item )
Spec. No.: Bd.J.2 Page No. 337
/ 23 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WP-015 Providing and fixing 20 to 25 mm thick rough shahabad 728.00 Sq.M.
box type waterproofing treatment to vertical outside faces
of Reinforced Cement concrete walls of basement or
underground floor including filling the gap of 25 mm
between rough shahabad and Reinforced Cement concrete
walls with cement grout mixed with water proofing liquid
Algae proof or other alike with one tile lift method,
brushing the joints horizontally with cement slurry mixed
with water proofing liquid for width 30 to 35 mmand
sloping coping over topmost tile with cement mortar 1:3,
butting the bottom most with Cement concrete 1:2:4
mixed with water proofing liquid, curing, with 7 years
guarantee on court fee stamp of Rs.100/- with ponding
test etc complete. (excluding Cement concrete 1:3:6 base
concrete ) ( prior permission of SE shall be obtained
before inclusion of item )
Spec. No.: Bd.J.2 Page No. 337
WP-016 "Providing and laying perforated PVC 160 mm dia pipe in 835.00 Rmt.
proper line,level & slope including necessary fitting etc.
complete. material etc complete."
Spec. No.: As directed by Engineer in charge
WP-017 "Providing and applying required coats of a water based 294.00 Sq.M.
UV resistant Evercrete Top Seal sealant to protect natural
stone, bricks, concrete and wooden structures from water
intrusion and staining due to water penetration and algae
formation etc complete."
Spec. No.: As directed by Engineer in charge
WP-018 "Providing and applying required coats of a water based 483.00 Sq.M.
Evercrete Deep Penetrating Sealer (DPS) on cement
concrete surface like roads, beams, and columns, plastered
walls, basements, roofs, potable water tanks etc to react
with cement and to penetrate concrete structure thereby
making it resistant to chemicals / chlorides to make it dust
proof and to act as a water resistant at the same time.
Strengthens the treated surface and reduce the curing
period etc complete "
Spec. No.: As directed by Engineer in charge
/ 24 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WP-019 "For RCC Slab : Mechanically clean the RCC slab and wall 549.00 Sq.M.
with wire brush / coir brush to free from all loose
materials like dust, dirt etc. Make wattah / coving of 50x50
mm at all horizontal & vertical joints to avoid right angle
horizontal & vertical joints to avoid right angle
turning.Seal all honeycombs, pin holes, joints, pipe outlets
with Polymer Modified Mortar. Also, pouring Dr.Fixit
Pidigrout 5M(or equivalent BASF/FOSROC/STP)
(expansive, non-shrinking grout) in the gaps around the
plumbing pipes or joints on through pre-wetted condition
with water and attaining a SSD condition..Providing and
applying one coat of polymer (1.5 Kg/ sq.mtr) having
elongation of > 300% Dr Fixit Solyseal (or equivalent
BASF / FOSROC / STP) Impermeability as per AST M
E 96: 94 is 0-5 gm/sqm. (Full cured in 24 hrs.) / System
Adhesions per AST M C836: 89 is Energy >4.00 J
/Crack Bridging as per AST M C836: 00 is No crack at 2
mm gap / Hardness, Shore A as per AST M D2240: 91
is >50 / Water Penetration as per DIN 1048: Pt 5: 91 is
No penetration / Tensile Strength, N/mm2 as per AST M
D412 is 0.3.). Laying of 140-160 gsm geo textile on first
coat as reinforcement. After drying of first coat apply
second coat( 1.5 kg / sqmtr ) of Dr Fixit Solyseal and
allow it to be cured. Providing and laying 140-160 gsm
geo-textile fleece on top of Dr Fixit Solyseal.For
protection of waterproofing treatment screed / brick bat
coba / china mosaic / light weight concrete to be
provided at extra cost as per site requirement. Note:Â The
above jobs is to be done by the authorised applicator of
the manufacturer / authorised (PWD) distributor with
guarantee on bond paper for five years"
Spec. No.: As directed by Engineer-in-charge
WP-020 "For RCC Slab : Mechanically clean the RCC slab and wall
with wire brush/coir brush to free from all loose materials
like dust, dirt etc. Make wattah / coving of 50x50 mm at
all horizontal & vertical joints to avoid right angle turning.
Seal all honeycombs, pin holes, joints, pipe outlets with
Polymer Modified Mortar. Providing and applying one
coat primer with Dr Fixit Torchshield Primer(or
equivalent Texsa / FOSROC / STP). Solvent based
/ 25 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
bitumen modified primer conforming to ASTM D-41 to
be used to seal and prepare the substrate prior to the
installation of Dr.Fixit Torchshield (or equivalent Texsa /
BASF / FOSROC / STP). Providing and applying Dr
Fixit Torchshield (with elongation break up as per EN-
12311-1 = L-40% T-40%, Tensile strength (N/5cm)= L-
700 & T=450, Tear strength as per ASTM D5147 = L-300
N & T-250N, Cold flexibility as per EN-1109 (upto2o C)
= -5, Softening point as per EN-1110 (oC) <150, water
absorption as per EN-1928 = -0.15% Max) (or equivalent
Texsa /BASF / FOSROC / STP).with proper alignment
and minimum overlap of 100MM with proper application
brick bat coba / china mosaic / light weight concrete to
be provided at extra cost as per site requirement. 3 mm
Thick. Note:Â The above jobs is to be done by the
authorised applicator of the manufacturer / authorised
(PWD distributor with guarantee on bond paper for five
years"
Spec. No.: As directed by Engineer-in-charge
3 mm thick 399.00 Sq.M.
4 mm thick 498.00 Sq.M.
WP-021 "For Wall & Parapit : Mechanical cleaning of Surface and 249.00 Sq.M.
treating surface in sound, clean and free from dirt, oil and
other loose material and may be done with vacuum
cleaning if required. All surface cracks upto 5mm width
will be filled up with Dr.Fixit Crack X Paste or similar
material. The external surface will be primed with
Dr.Fixit Primeseal(or equivalent BASF / FOSROC /
STP) diluted with potable water in the ratio of 2:1 by
volume prior to application of Dr.Fixit Raincoat . Allow it
to dry for at least 2 to 3 hours and then apply Dr.Fixit
Raincoat or Equivalent (BASF/FOSROC/STP) having
DFT of 110 micron, elongation of > 100% as per ASTM
D412-02 and algae & fungal resistance as per SS 345-1998.
Accelerated weathering (2000 Hrs UV Exposure) as per
ASTM D4587 No defects) in 2 coats by brush, roller or
spray with an interval of 5 to 6 hrs. Allow it to air cure for
7 days and (do not dilute Dr.Fixit Raincoat by any means).
Note: The above jobs is to be done by the authorised
/ 26 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
applicator of the manufacturer/authorised (PWD
distributor with guarantee on bond paper for five years"
Spec. No.: As directed by Engineer-in-charge
WP-022 "Vaccum cleaning if required. All surface cracks upto 749.00 Sq.M.
5mm width will be filled up with Dr.Fixit Crack X Paste
(or equivalent BERGER/ ASIAN / BASF /FOSROC
/STP). The external surfaces will be primes with Dr.Fixit
Primeseal(or equivalent BASF / FOSROC / STP) diluted
with potable water in the ratio of 2:1 by volume prior
to application of Dr.Fixit Newcoat or equivalent ( BASF /
FOSROC / STP) . Allow it to dry for at least 2 to 3 hours
and then apply Dr.Fixit Newcoat (As per technical data
enclosed with BOQ)Apply three coats of Newcoat with
different shades colors for better monitoring with time
interval of 6-8 hrs between each coat.The application of
each coat shall be in perpendicular direction to the
subsequent coat. Allow Newcoat to air cure for 3 to 4 days
before subjecting to use / foot traffic. Allow it to air cure
for 7 days and (do not dilute Dr.Fixit Newcoat by any
means). Note: The above jobs is to be done by the
authorised applicator of the manufacturer / authorised
(PWD) distributor with guarantee on bond paper for five
years"
Spec. No.: As directed by Engineer-in-charge
WP-023 "For Wet Areas with Bath Seal : Mechanically clean the 799.00 Sq.M.
RCC slab surface and side walls with wire brush / coir
brush to free from all loose materials like dust, loose
particles, dirt, etc. Seal all honeycombs, pin holes, joints,
pipe outlets with Polymer Modified Mortar (1:5:10) Also
apply, around all PVC / CI pipes fixed in toilet
waterproofing system Dr Fixit Bathseal Tape(or equivalent
BASF / FOSROC / STP) / Crack Bridging ability is >1.5
MM as per ASTM C 838 ), a non reinforced twin side
adhesive bitumen membrane comprising of polymerised
bitumen, sandwiched between plastic released films on
either side, then usingDr.Fixit Pidigrout 5M( expansive,
non-shrinking grout) in the gaps around the plumbing
pipes where bathseal tape has been used, after attaining a
SSD condition. Making first coat of Dr Fixit Pidifin 2K(or
/ 27 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
equivalent BASF / FOSROC / STP) (Sp.Gravity @30
Degree, g/cc is 1.65+ 0.10 / Abrasion resistance, cm/km
is 0.09/rapid chloride permeability reduction in chloride
ion penetration, is 90% as per ASTM C 1202: 1997 /
properly rendered, cleaned RCC slab &side walls with
brush and allow it to dry for 6-8 hrs. After drying of first
coat, apply second coat and sprinkled coarse sand on
vertical surface. The Pidifin 2K Coating should continue
up to 4 feet above finished floor level. Allow 24 hrs for
full cure. Apply 12-15 mm waterproof plaster on slab &
vertical surface before admixed with Dr Fixit Pidiproof
LW+(or equivalent BASF / FOSROC / STP) IS2645
Dosage 200ml per bag of cement. Cure the surface with
water.
Note: The above jobs is to be done by the authorised
applicator of the manufacturer / authorised (PWD)
distributor with guarantee on bond paper for five years"
Spec. No.: As directed by Engineer-in-charge
WP-024 "Terrace Water Proofing for Old Construction :
Mechanically clean the RCC slab and wall with wire brush
/ coir brush to free from all loose materials like dust, dirt
etc. Make wattah / coving of 50x50 mm at all horizontal
& vertical joints to avoid right angle turning. Seal all
honeycombs, pin holes, joints, pipe outlets with Polymer
Modified Mortar. Providing and applying one coat primer
with Dr Fixit Torchshield Primer (or equivalent Texsa /
FOSROC / STP). Solvent based bitumen modified primer
conforming to ASTM D-41 to be used to seal and prepare
the substrate prior to the installation of Dr.Fixit
Torchshield Mineral Finish Green Color (or equivalent
Texsa / BASF / FOSROC / STP). Providing and
applying Dr Fixit Torchshield Mineral Finish Green Color
(with elongation break up as per EN-12311-1 = L-40% T
40%, Tensile strength (N/5cm) = L-700 & T=450, Tear
strength as per ASTM D5147 = L-300 N & T-250N,
Cold flexibility as per EN-1109 (upto2o C) = -5, Softening
point as per EN-1110 (oC) <150, water absorption as per
EN-1928 = -0.15% Max) (or equivalent Texsa /BASF /
FOSROC / STP).with proper alignment and minimum
overlap of 100MM with proper application method, For
/ 28 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
protection of waterproofing treatment screed / brick bat
coba / china mosaic / light weight concrete to be
provided at extra cost as per site requirement. Note: The
above jobs is to be done by the authorised applicator of
the manufacturer / authorised (PWD distributor with
guarantee on bond paper for five years For 3 mm thk
Mineral finish Green Color "
Spec. No.: As directed by Engineer-in-charge
a) 3 mm thick 418.00 Sq.M.
b) 4 mm thick 519.00 Sq.M.
WP-025 "Fixing of Dr Fixit Waterbar SW2020 (or equivalent BASF 599.00 Sq.M.
/ FOSROC / STP) on all construction joints like slab &
wall, lift joints etc during concreting work is on.
Mechanically clean the RCC slab and wall with wire brush
/ coir brush to free from all loose materials like dust, dirt
etc. Seal all honeycombs, pin holes, joints with Polymer
Modified Mortar attain SSD condition.Apply first coat of
Dr Fixit Pifin2k (or equivalent BASF / FOSROC / STP)
rapid chloride permeability reduction in chloride ion
penetration, is 90% as per ASTM C 1202: ]on properly
rendered, cleaned RCC slab & wall with brush and allow it
to dry for 6 8 hrs.After drying of first coat apply second
coat and sprinkled coarse sand on vertical surface. Allow
24 hrs for full cure.Apply waterproof screed concrete 30-
40 mm on floor and 12-15 mm waterproof plaster on
vertical surface before admixed with Dr Fixit Pidiproof
LW+(or equivalent BASF / FOSROC / STP) IS : 2645 :
as per standard)@ 200ml per bag of cement. Cure the
surface with water. Clean the surface with wire brush to
remove all loose dust, dirt etc.Saturate the surface with
water to reach SSD condition. Apply two coats of Dr Fixit
Safeguard(or equivalent BASF / FOSROC / STP) ((pot
life at30C, hrs is 60-75, Surface drying time at 30C as per
ASTM D-1649 6-8,Water absorption as per ASTM C
870:90 – NIL, Food Grade certification PASSES-Ref-
USFDA-175-300, Antifungal Activity as per EN 15458-06
) by brush on SSD floor & wall by brush on an interval of
6-8 hrs in between 2 coats. Allow the surface for full cure
of 24 hours before use."
Spec. No.: As directed by Engineer-in-charge
/ 29 /
CIDCO SCHEDULE OF RATES : 2015-2016
Waterproofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WP-026 Providing and applying POLYSAFE-EC (Patent No.571) 319.00 Sqm.
for external walls, slopping R.C.C. Roofs, in three coats to
avoid water penetration, Ultra-Violet effects of Sun-rays,
Fungus development and to protect the reinforcement
from corrosion in atmospheric effects. Cleaning the
surface of concrete by brushing with solvent and applying
POLYSAFE-EC Chemical coating with primer and after
24 Hours interval applying 1st cost, and after 24 Hour
interval applying second, third and final coat of approved
shade, colour, avoid smoking while painting including
necessary scaffolding etc. complete (with the permission
of S.E.)
WP-027 Providing waterproofing treatment as per IS 1346-1966 to 180.00 Sqm.
generally inaccessible sloping RCC terrace slab with
bitumen filler in all positions in five coarse consisting of
applying old bitumen primer coat @ 2.5 litre/10 sqm. Hot
bitumen layer @ 14.50 kg/10 sqm. and over the same
layer of bitumen feit of type III grade as per IS 1332-1965
across slope with 10 cm. overlap commencing at the
lowest level and again applying hot bitumen coarse @
14.50 kg/10 sqm. including all lifts, leads and scaffoldings
whenever necessary complete as directed with 5 year
guarantee etc. complete.
/ 30 /
CIDCO SCHEDULE OF RATES : 2015-2016
EXPANSION JOINTS
Expansion Joints…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXP-001 Providing expansion joints in R.C.C. framed structure 2851.00 Sqm.
(interior columns) with plain premoulded filler 25 mm
thick, including fixing T.W. battens both faces and
complete as directed.
Spec. No.: Bd.K.1 Page No. 357
EXP-002 Providing expansion joints in R.C.C. framed structure 3332.00 Sqm.
(exterior columns) with plain premoulded filler 25 mm
thick and 3 mm thick aluminium plate, hold fast, fixing
T.W. battens on internal face, finishing etc. complete as
directed.
Spec. No.: Bd.K.1 Page No. 357
EXP-003 Providing expansion joints in R.C.C. framed structure (at 3824.00 Sqm.
floor level) with plain premoulded filler 25 mm thick and
3 mm thick aluminium plate, bitumen poured filler,
fixing T.W. battens on internal face, finishing etc.
complete as directed.
Spec. No.: Bd.K.1 Page No. 357
EXP-004 Providing expansion joints in R.C.C. framed structure (at 3865.00 Sqm.
floor level) with plain premoulded filler 25 mm thick and
3 mm thick aluminium plate, bitumen poured filler fixing
lead flushing on upper side, T.W. battens on internal
face, finishing etc. complete as directed.
Spec. No.: Bd.K.1 Page No. 357
EXP-005 Providing expansion joints in reinforced cement concrete 4518.00 Sq.M.
framed structure (interior columns) with plain premoulded
filler 25 mm thick with 40 mm wide and 1 mm thick
stainless steel plate, hold fast, fixing T.W. battens of
internal face finishing etc. complete as directed.
Spec. No.: Bd.K.1A Page No. 357
EXP-006 Providing expansion joints in R.C.C. framed structure 5015.00 Sq.M.
(exterior column) with plain premoulded filler 25 mm
thick with 40 mm wide and 1 mm thick stainless steel
plate, hold fast, fixing T.W. battens on internal face and
finishing etc. complete.
Spec. No.: Bd.K.1B Page No. 357
/ 31 /
CIDCO SCHEDULE OF RATES : 2015-2016
Expansion Joints…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXP-007 Providing expansion joints in R.C.C. framed structure (at 4491.00 Sq.M.
floor level) with plain premoulded filler 25 mm thick with
40 mm wide and 1 mm thick stainless steel plate, hold fast,
fixing T.W. battens of internal face and finishing etc.
complete.
Spec. No.: Bd.K.1C Page No. 357
EXP-008 Providing expansion joints in R.C.C. framed structure (at 4575.00 Sq.M.
Terrace level) with premoulded filler 25 mm thick with 40
mm wide and 1 mm thick stainless steel plate as required,
bitumen poured filler and fixing T.W. battens on inner
faces finishing etc. complete as directed.
Spec. No.: Bd.K.1D Page No. 357
EXP-009 Providing and fixing of BITUFLEX CLOSE CELL 1239.00 Rmt
FOAM of size 30 mm x 30 mm in double layer in the
expansion joints in R.C.C framed structure (at floor level /
at terrace level / interior columns) for overlapping of
closed cell foam joints, applying TP- 40 PRIMER on both
the sides of concrete surface, filling the 25 mm x 25 mm
gap with the POLYDEE-41 highly flexible sealant and
covering the joint with Polydee-LM, 150 mm width in 2
coats etc. complete.
Spec. No.: As directed by Engineer in charge
EXP-010 Providing and fixing of BITUFLEX CLOSE CELL 1577.00 Rmt
FOAM of size 30 mm x 30 mm in double layer in the
expansion joints in R.C.C. framed structure (Exterior
column) with closed cell foam , applying TP-40 PRIMER
on both the sides of concrete surface, filling the 25 mm x
25 mm gap with the POLYSEAL, highly flexible sealant
and covering the joint with Polydee- LM, 150 mm width
in 2 coats and fixing the aluminium plate of 100 mm wide
and 3 mm thick on external face of column etc. complete.
Spec. No.: As directed by Engineer in charge
EXP-011 Providing and fixing chicken mesh of 19 gauge with 494.00 Sqm.
about 35 cm width at the junction of R.C.C. members
and brick work, of approved quality including fixing
mesh in position by necessary nailing in concrete
or/B.B. masonry and or tying by binding wire etc.
complete.
/ 32 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 33 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 34 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 35 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 36 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 37 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 38 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 39 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 40 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 41 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 42 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 43 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 44 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 45 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 46 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 47 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 48 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 49 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 50 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 51 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 52 /
CIDCO SCHEDULE OF RATES : 2015-2016
WOOD FINISHES
Wood Finishes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WDF-001 Providing and applying french polishing for required finish 55.00 Sqm.
on previously polished wood including knoting, preparing
the surface scaffolding etc. complete as directed.
Spec. No.: Bd.N.1.3 Page No. 406
WDF-002 Providing and applying french polishing to new wood work, 106.00 Sqm.
including knoting, preparing the surface scaffolding etc.
complete as directed.
Spec. No.: Bd.N.1.3 Page No. 406
WDF-003 Providing and applying Melamine polish of glossy/mat 655.00 Sqm.
required finish of approved colour to woodwork by spray
machine, including knotting and preparing the surface by
scrapping, applying french polishing, scaffolding if required
etc. complete. The work to be executed with prior approval
to Superintending Engineer.
Spec. No.: As directed by Engineer-in charge.
WDF-004 Providing and applying boiled linseed oil in one coat to old 12.00 Sqm.
wood works including knoting, preparing the surface
scaffolding etc. complete as directed.
Spec. No.: Bd. N. 1. 1 Page No. 409
WDF-005 Providing and applying boiled linseed oil in two coats to old 19.00 Sqm.
wood works including knoting, preparing the surface
scaffolding etc. complete as directed.
Spec. No.: Bd.N.1.1 Page No. 409
WDF-006 Providing and applying Wax polishing to the new wood 25.00 Sqm.
work including knoting, preparing the surface scaffolding
etc. complete as directed.
Spec. No.: Bd.N.1.2 Page No. 409
WDF-007 Providing and applying Wax polishing to the old wood 20.00 Sqm.
works including knoting, preparing the surface scaffolding
etc. complete as directed.
Spec. No.: Bd. N. 1.2 Page No. 409
WDF-008 Providing and applying varnish in one coat on previously 17.00 Sqm.
varnished wood works, including knoting, preparing the
surface scaffolding etc. complete as directed.
Spec. No.: Bd.N.1.4 Page No. 408
/ 53 /
CIDCO SCHEDULE OF RATES : 2015-2016
Wood Finishes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WDF-009 Providing and applying coal tar in one coat on previously 9.00 Sqm.
painted wood including knoting, preparing the surface
scaffolding etc. complete as directed.
WDF-010 Providing and applying coal tar in two coats on previously 15.00 Sqm.
painted wood including knoting, preparing the surface
scaffolding etc. complete as directed.
WDF-011 Providing and applying Varnish in two coats on new wood 27.00 Sq.M.
work including knotting, preparing the surface, scaffolding
etc. Complete.
Spec. No.: Bd.N.1.4 Page No. 408
/ 54 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 55 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 56 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 57 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 58 /
CIDCO SCHEDULE OF RATES : 2015-2016
OP-029 Providing and applying colour wash of approved colour, 5.35 Sqm.
shade and quality in two coats to new surface, including
scaffolding, brushing and brooming down (excluding two
coats of white wash as base coat to be paid separately) etc.
complete.
OP-030 Providing and applying colour wash of approved colour, 10.70 Sqm.
shade and quality in three coats to new surface, including
scaffolding, brushing and brooming down (excluding two
coats of white wash as base coat to be paid separately) etc.
complete.
OP-031 Providing and applying colour wash of approved colour, 5.35 Sqm.
shade and quality in two coats to old surface, including
scaffolding, brushing and brooming down (excluding one
coat of white wash as base coat to be paid separately) etc.
complete.
OP-032 Providing and applying colour wash of approved colour, 9.70 Sqm.
shade and quality in three coats to old surface, including
scaffolding and preparing the surface by brushing and
brooming down (excluding one coat of white wash as base
coat to be paid separately) etc. complete.
OP-033 Providing & applying washable oil-bound distemper of
/ 59 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 60 /
CIDCO SCHEDULE OF RATES : 2015-2016
WOOD WORK
Wood Work…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WD-001 Providing and fixing Ghana teak wood planking……
thick for flooring plained on both sides, tounged and
grooved including scaffolding, if necessary, and one coat
of primer complete. –
a) 25mm Thick 2130.00 Sq.M.
b) 50mm Thick 4080.00 Sq.M.
WD-002 Providing and fixing ghana teak wood joists and griders in 90030.00 Cum.
timber floors of single, double or framed type including
scaffolding if necessary and one coat of primer complete.
Spec. No.: Bd.Q.2 Page No. 436
WD-003 Providing and fixing hard wood of approved species joists 37377.00 Cum.
and grinders in timber floors of single, double or framed
type, including scaffolding if necessary and one primer coat
complete.
Spec. No.: Bd.Q.2 Page No. 436
WD-004 Providing and fixing ghana teak wood plank ceiling 20 mm 1960.00 Sqm.
thick planed on the underside toungued and grooved,
including iron screws and scaffolding if necessary, including
primer coat on underside and one coat tar on upperside
complete.
Spec. No.: Bd.Q.3 Page No. 438
WD-005 Providing and fixing ghana teak wood framed collar 92320.00 Cum.
beam/king post/ Queen post truss with all iron work,
including scaffolding if necessary and primer coat complete.
Spec. No.: Bd.Q.4, Page No. 439
WD-006 Providing and fixing hard wood of approved species frame 48584.00 Cum.
collar beam/king post, queen truss with all iron work,
including scaffolding if necessart and primer coat complete.
Spec. No.: Bd.Q.4, Page No. 439
WD-007 Providing and fixing Ghana teak wood common rafters, 86680.00 Cum.
purlins and purlin cleats, hip rafters, jack rafters, ridges, wall
plates, post plates and posts for roofing etc. including
scaffolding if necessary, all iron work and one primer coat
complete.
Spec. No.: Bd.Q.5, Page No. 439
/ 61 /
CIDCO SCHEDULE OF RATES : 2015-2016
Wood Work…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WD-008 Providing and fixing hard wood of approved species for 42,969.00 Cum.
common rafters, purlins and purlin cleats, hip rafters, jack
rafters, ridges, wall plates, post plates and posts for roofing
etc. including scaffolding if necessary ,all iron work and one
primer coat complete.
Spec. No.: Bd.Q.5, Page No. 439
WD-009 Providing and fixing Ghana teak wood hand rail of 60 mm 720.00 R.Mt.
x 75 mm as per detailed drawings or as directed by the
Engineer, including french polishing, etc. complete. (Note
: The work to be executed on preapproval of
Superintending Engineer)
Spec. No.: Bd.Q.8, Page No. 442
WD-010 Providing and fixing country cut teak wood two way trellis 932.00 Sqm.
work with battens or laths 2.5 cm x 1.2 cm and 5.0 cm x 5.0
cm openings, including frame of 8.0 cm x 5.0 cm vertical
and horizontal scantlings and one coat of primer complete.
WD-011 Providing and constructing Indian teak wood hand rail of 60 639.00 Rmt.
x 70 mm as per detailed drawings or as directed by the
Engineer - in - charge, including french polishing complete.
WD-012 Providing and fixing in position P.V.C. hand rail of 390.00 Rmt.
approved quality as per IS std. make and shade, as per
detailed drawings or as directed by the Engineer-In-Charge,
including french polishing complete (50 mm size).
Spec. No.: As directed by Engineer in charge.
WD-013 Providing and fixing 20 mm thick teak wood particle board, 1938.00 Sqm.
faced with teak wood Venner for pelmet boxes of 150 to
200 mm wide, to door or window frames, including 20 mm
diameter aluminium curtain rod with sockets and finishing
with french polishing (without top) complete.
WD-014 Providing and fixing decorative teak plywood Veneer lining 935.00 Sqm.
4 mm thick with backing of Ghana teak wood frame work
of battens 12 x 25 mm at 30 cm centre to centre fixed to
walls and pillars, without skirting and cornice as per
drawings, including necessary iron work and finishing the
exposed wood with french polish complete.
Spec. No.: Bd.Q. 18 Page No. 449
/ 62 /
CIDCO SCHEDULE OF RATES : 2015-2016
Wood Work…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WD-015 Providing and fixing jungle wood ballies of approved 81.35 Rmt.
species 85 mm average diameter for common rafter, purlins,
ridge, hip and valley rafters, jack rafter, wall plate, post plate,
posts, etc. including all iron work, scaffolding if necessary
and oiling in one coat complete.
WD-016 Providing and fixing 100 mm dia, country teak wood ballies 169.00 Rmt.
for king post truss of 6.00 m' span as per drawings or as
directed by Engineer-in-charge, including all iron work,
scaffolding if necessary and oiling complete.
WD-017 Providing and fixing shutter to wall cupbaord made from 12 2515.00 Sqm.
mm thick teak wood particle board and one face with
approved colour laminated face bonded with phenol
formaldehyde synthetic resin B.W.P. grade, including
lipping, beading, iron oxidised fixtures and fastenings and
painting primer one coat etc. complete.
Spec. No.: As directed by Engineer in charge.
WD-018 Providing and fixing country teak wood planking 25 mm 1887.50 Sqm.
thick for flooring planed on both sides, tongued and
grooved, including scaffolding if necessary and one coat of
primer complete.
WD-019 Providing and fixing country teak wood planking 50 mm 3611.30 Sqm.
thick for flooring planed on both sides, tongued and
grooved, including scaffolding if necessary and one coat of
primer complete.
WD-020 Providing and fixing ghana teak wood skirting 20 mm thick 2730.00 Sqm.
in required position of the size shown in the drawings
including all mouldings as per drawings, rough grounds,
rawl plugs if necessary and finishing with french polish
etc.complete.
Spec. No.: BdQ-10 Page No. 443
WD-021 Providing and fixing ghana teak wood eaves board 15 cm 433.00 Rmt.
wide and 25 mm thick plain type, including scaffolding and
primer in one coat complete.
Spec. No.: Bd.Q. 19 Page No. 449
WD-022 Providing and fixing hard wood (seasoned and treated) 205.00 Rmt.
eaves board 15 cm wide and 25 mm thick plain type,
including scaffolding and primer in one coat complete.
Spec. No.: Bd.Q. 19 Page No. 449
/ 63 /
CIDCO SCHEDULE OF RATES : 2015-2016
Wood Work…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
WD-023 Providing and fixing ghana teak wood eaves plate of size 10 253.00 Rmt.
cm wide and 20 mm thick, including scaffolding and primer
in one coat complete.
Spec. No.: Bd.Q.20 Page No. 450
WD-024 Providing and fixing Ghana Teak Wood barge board 22 cm 533.00 Rmt.
wide and 20 mm thick plain type, including scaffolding and
primer in one coat complete.
Spec. No.: Bd.Q.21 Page No. 450
WD-025 Providing and fixing seasons & treated hard word of 240.00 Rmt.
approved species barge board 22 cm wide and 20 mm
thickness plain type, including scaffolding and primer in one
coat complete.
Spec. No.: Bd.Q.21 Page No. 450
/ 64 /
CIDCO SCHEDULE OF RATES : 2015-2016
ROOFING
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-001 Providing and fixing corrugated galvanized iron sheets of 674.00 Sq.Mtr.
0.63 mm thickness (24 B.W.G.) conforming IS.277/1969
for roofing without wind tiles, including fastening with
galvanised iron screws and bolts and bitumen washers as
per drawing complete.
Spec. No.: Bd.R.5, Page No. 464
RFG-002 Providing and fixing plain zinc sheeting of 1.00 mm thick 760.00 Sq.Mtr.
(20 B.W.G.) over the ridge, hip or valley for galvanised
corrugated iron sheets roofing, including fastening with
galvanised iron screws and bolts and bitumen washers as
per drawing complete.
Spec. No.: Bd.R.5, Page No. 464
RFG-003 Providing and fixing 6.00 mm thick asbestos cement 443.00 Sq.Mtr.
corrugated (Big size) sheet roofing, conforming to I.S. 459-
1970, including galvanised iron J or L hook bolts,
galvanised iron and bituminous washers, galvanised iron
cramp bolts and nuts and scaffolding complete.
Spec. No.: Bd. R.7, Page No. 466
RFG-004 Providing and fixing 6.00 mm thick asbestos cement 381.00 Sq.Mtr.
corrugated (Trafford) sheet roofing, including galvanised
iron J or L hook bolts, galvanised iron and bituminuous
washers, galvanised iron cramp bolts and nuts and
scaffolding complete.
RFG-005 Providing and fixing 6.00 mm thick asbestos cement ridge 346.00 Rmt
capping for roofing, conforming to I.S. 459-1970 including
galvanised iron hook bolts, galvanised iron and
bituminuous washers, galvanised iron cramp bolts and nuts
and scaffolding complete.
Spec. No.: Bd.R.9, Page No. 466
RFG-006 Providing and fixing valley gutter of 0.8 mm thick (22 2290.00 RMT
B.W.G.) plain galvanised iron sheets 120 cm. Wide with
teakwood planking of 20mm thick including two coats of
coal tarring the upper surface of plank (excluding painting
to under side of plank) complete.
Spec. No.: Bd. R. 10, Page No. 469
/ 65 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-007 Providng and fixing valley gutter of 0.8 mm thick (22 1717.00 RMT
B.W.G.) plain galvanised iron sheets 90 cm. Wide with
teakwood planking of 20mm thick including two coats of
coal tarring the upper surface of plank (excluding painting
to under side of plank) complete.
Spec. No.: Bd. R. 10, Page No. 469
RFG-008 Providing and fixing valley gutter of 24 B.W.G. (0.63 mm) 2262.00 Rmt
thick G.I. sheet 120 cm wide with 20 mm thick teak wood
planking underneath coal tarring etc. complete.
Spec. No.: Bd. R. 10, Page No. 469
RFG-009 Providing and fixing asbestos cement cowl ventilators in 133.00 No.
asbestos cement sheet roofing at the required places,
including all accessories and scaffolding if necessary.
RFG-010 Providing and fixing false ceiling of plain asbestos cement 1335.40 Sq.Mtr.
sheets 4 mm thick, including scaffolding if necessary all
iron work etc, complete(excluding frame work and teak
wood runner to be paid separately)
RFG-011 Providing and fixing false ceiling of 12 mm thick acoustic 1449.00 Sq.Mtr.
boards of approved make, with shapes and sizes as per
drawings, including scaffolding, all screws and fastening
and finishing complete. (Excluding frame work and runner
to be paid separately).
Spec. No.: Bd. R. 19 Page No. 479
RFG-012 Providing and fixing false ceiling of 15mm thick Acoustic 1541.00 Sq.M.
board of Armstrong/ Everest/ AMS (0.60 x 0.60 m.size )
or equivalent approved make, shape and sizes as per
drawings including powder coated G.I. wall angle of 20mm
x 20mm x 0.6mm size, G.I. grid runners of size20mm x
38mm at 600mm center to center both ways and
suspended using G.I. 3mm wire including fixing using
butterfly clips and fasteners including transporting,
scaffolding all necessary labour and machinery, finishing
etc. complete.
Spec. No.: As directed by Engineer in charge.
RFG-013 Providing and fixing false ceiling of teakwood particle 1113.00 Sq.Mtr.
board half perforated sheets 12mm thick, including
scaffolding if necessary all iron work etc,
complete(excluding frame work and teak wood runner to
be paid seperately)
Spec. No.: Bd. R. 17, Page No. 472
/ 66 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-014 Providing and fixing False ceiling of 12 mm thick 1831.00 SqM.
Laminated board with frame of M.S. angle 40 x 40 x 5 mm
and Tee of size 40 x 40 x 6mm at 60 cm c/c including 12
mm dia. hangers, T.W. battens 50 x 25 mm and beading 25
x 15 mm thick scaffolding if necessary, all Iron work etc.
complete.
Spec. No.: Bd. R. 17, Page No. 473
RFG-015 Providing and fixing false ceiling of 15 to 20 mm thick 500.80 Sq.Mtr.
decorative boards of fibre plaster of paris, including
scaffolding if necessary, all architectural work like
mouldings, cornices, curves, domes, cups as per detailed
drawing and three coats of spray painting to baords etc.
complete (excluding frame work, runners & mild steel
suspenders to be paid separately)
RFG-016 Providing and fixing Mangalore tiled roofing with Class 692.00 Sq.Mtr.
"AA" tiles, including fixing 50 x 25 mm horizontal teak
wood battens, all iron works and oiling the battens and
securing the last course of tiles near the eaves with mild
steel flats of 40 mm x 3 mm or 10 mm dia. steel rod and
1.22 mm thick wire plaining the underside of battens
including scaffolding if necessary etc. complete(excluding
ridge and hip tiles).
Spec. No.: Bd.R.1, Page No. 459
RFG-017 Providing and fixing Mangalore tiled roofing with Class 667.00 Sq.Mtr.
"AA" tiles, including securing the last course of tiles near
the eaves with steel flats 40 mm x 3 mm and fixing by 112
mm long screw and fixing of 50 mm x 25 mm country teak
wood sloping battens and fixing 50 mm x 25 mm country
teak wood horizontal battens over the sloping battens
including painting to all iron work and coal tarring the
battens complete (excluding ridge and hip tiles)
Spec. No.: Bd.R.2, Page No. 462
RFG-018 Providing and fixing new Mangalore tiles with class "AA" 241.00 Sq.Mtr.
tiles, including scaffolding to M.T. roofing excluding
woodwork etc. complete.
/ 67 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-019 Providing and fixing Mangalore type ridge and hip tiles 155.00 Rmt
class "AA" tiles, including scaffolding if necessary,
pointing with coloured cement mortar and curing
complete.
Spec. No.: Bd.R.3, Page No. 463
RFG-020 Providing and fixing glass tiles of Mangalore type at 453.00 No.
required placed in Mangalore tile roof, including
scaffolding, if necessary.
Spec. No.: Bd. R. 11, Page No. 469
RFG-21 Providing and dammering to roof with Two coat of 82.40 Sq.Mtr.
bitumen (on new dungree cloth one coat on each side)
including scaffolding etc. complete as directed.
RFG-22 Providing and dammering to roof one coat of Bitumen 30.00 Sq.Mtr.
(without cloth) including scaffolding etc.
RFG-023 Providing and fixing glass crete roof in reinforced concrete 818.00 No.
member (0.05 x 0.75 meter) in size at 60 cm, center to
center with 12 mm thick wired glass having thickness of 6
mm, including all accessories and required fixtures and
fastenings, fitting complete(Excluding reinforced cement
concrete member)
Spec. No.: As directed by Engineer-in-charge
RFG-024 Providing and fixing asbestos cement sheet of IS Std.(60 242.00 RMT
cm top width) and (23 cm bottom width) and (15 cm
depth) valley gutters of approved size and make , including
drop ends, stop ends necessary fixtures and fastening the
same as per code of standard practice complete.
RFG-025 Providing and fixing 12mm dia mild steel bar upto 0.5 m 82.00 No.
length for anchor rods necessary threading nuts and bolts
etc. complete.
Spec. No.: As directed by Engineer in charge
RFG-026 Providing and fixing 16mm dia mild steel bar upto 0.5 m 95.25 No.
length for anchor rods necessary threading nuts and bolts
etc. complete.
RFG-027 Providing fixing Mangalore tile roofing with class AA tiles 571.00 Sq.Mtr.
in cement mortar 1:4 on sloping slab including necessary
scaffolding curing, finishing, etc. complete.
Spec. No.: Bd. R. 3A., Page No. 460
/ 68 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-028 Providing and fixing of precoated galvinized steel profile 842.00 Sq.Mtr.
sheet (confirming to IS 14246) of TATA / JINDAL or
eqivalent make (size, shape & pitch of corrugation as
approved by Engineer-in-charge) 0.50mm (-/+0.05%) total
coated thickness with zinc coating minimum 120 gms per
sq.mtr. as per IS 277, in 240 mpa steel grade, 5-7microns
eppoxy primer on both side of the sheet and polyster top
coat 15-18 micorns and bottom minimum 7 microns. Sheet
should have protective guard film of 25 micorns minimum
to avoide scratches during transportation and should be
supplied in single length upto 12.0 meters or as directed by
Engineer-in-charge. The sheet shall be fix using self drilling
/ self tapping screws of size(5.5 x 5.5mm) with EPDM
seal, complete upto any pitch in horizontal / vertical or
curved surface excluding the cost of purlins, rafters and
trusses and including cutting to size and shape whereever
required. (Prior Approval of S.E. is essential)
Spec. No.: As directed by Engineer in charge
RFG-029 Providing and fixing of precoated galvinized profile sheet 791.00 R.Mt.
roofing (confirming to IS 14246) of TATA / JINDAL or
eqivalent make accessories, 0.50mm (+/-0.05%) total
coated thickness with zinc coating minimum 120 gms per
sq.mtr. as per IS 277, in 240 mpa steel grade, 5-7microns
eppoxy primer on both side of the sheet and polyster top
coat 15-18 micorns using self drilling / self tapping screws
complete for ridges (500-600mm).
Spec. No.: As directed by Engineer in charge.
RFG-030 Providing & fixing self supported (proflex or equivalant
make) roofing system for Godown, workshop, or similar
storage structure, made up of structural grade steel sheet of
914 mm. width, mounted at site using mechanical press
dies to the desired curve and shape to form 605 mm wide
interlocking panels. For span ------ mtr having arch rise as
--- mtr and arch length upto 33.0 meter. The base material
made up of imported galvalume steel complying to ASTM
AT92 having base metal thickness 0.80 millimeter with
alloy coating AZ150 and paint coating of regular modified
polyester, top wat 25 micron and bottom coat 12 micron
as per approved color, including fixing hangers,clamps etc
/ 69 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
as may be necessary including fixing skylight of 2 mm thick
polycarbonats sheet of size 0.60 x 2.10 m and turbo
ventillator of 0.60 m diameter to be installed at every 10 m
along the length of roof including finishing, testing &
cleaning etc complete. (Prior Approval of S.E. is essential)
a) span of 15.30 mtr.& Rise 3.06 mtr 1709.00 Sq.Mtr.
b) span of 21.50 mtr.& Rise 4.26 mtr 1943.00 Sq.Mtr.
c) span of 25.00 mtr.& Rise 5.00 mtr 2200.00 Sq.Mtr.
d) span of 28.75 mtr.& Rise 5.75 mtr 2472.00 Sq.Mtr.
RFG-031 Providing and fixing UPVC Roof made up of 3 layers 1015.00 Sq.Mtr.
roofing material of thickness 2mm having width of 1130
mm and of required Length having Tensile strength not
less than 330 kg/cm2, including fastening with self drilling
screw having washers made of stainlesssteel etc.complete.
Spec. No.: As directed by Engineer in charge.
RFG-032 Providing and fixing PVC coloured Ridge tiles over UPVC 557.00 R.Mt.
roofing where required having size 113cm x 41cm and
height 9.5 cm for ridge including fastening with self drilling
screw having washers made of stainless steel etc complete.
Spec. No.: As directed by Engineer in charge.
RFG-033 Providing and fixing manglore pattern cowl ventilator tiles 92.00 No.
in the required places in a manglore tile roof including
scaffolding if necessary etc. complete.
Spec. No.: Bd. R. 13, Page No. 469
RFG-034 Providing and fixing frame work of anodised aluminium 809.00 Sq.Mtr.
sections for suspended false ceiling consisting of
aluminium T 50 mm x 40 mm weighing 0.39 kg/m. at 60
cms c/c & fixed with (15 x 15 mm) flanges weighing 0.119
kg/m suspended on 6 mm dia. mild steel rod weighing
0.22 kg/m fixed on wall and beams including rounding of
the edges with aluminium T of 50 mm x 40 mm weighing
0.39 kg/m etc. including all labour etc, complete.
Spec. No.: As directed by Engineer in charge
RFG-035 Providing and fixing frame work of galvanised iron for 625.00 Sq.Mtr.
suspended false ceiling which includes galvanised iron
perimeter channels of size 27 mm & 0.5 mm thick having
one flange of 20 mm and another of 30 mm along with
/ 70 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
perimeter of the ceiling, fixing in brick wall / partition with
the help of rawal plugs and screws, suspending galvenised
iron intermediate channels of size 45 mm and 0.9 mm
thick with two flanges of 15 mm each from the soffit at
1200 mm centers with steel galvanised iron hanger of
width 25 mm x 0.5 mm fasteners, ceiling section of 0.5
mm thickness having curved wedge of 51.5 mm and two
flanges of 26 mm each with lips of 10.5 mm fixed to the
intermediate channel with the help of connecting clips and
in direction perpendicular to the intermediate channel at
450 mmcenters,12.5 mm dry walls screws at 230
mmcenters; fixing screws mechanically either with screw
driver or drilling machine with suitable attachmentetc.
complete.
Spec. No.: As directed by Engineer in charge
RFG-036 Providing and fixing false ceiling of teak wood particle 1086.00 Sq.Mtr.
board half perforated sheet 12 mm thick including
scaffolding, if necessary, all iron work and two coats of oil
painting to boards and beading i.e. visible surface
(excluding frame work and runners)
Spec. No.: Bd. R. 17 Page No. 473
RFG-037 Providing and fixing false ceiling of 10 to12 mm thick 688.00 Sq.Mtr.
decorative boards of fibrous plaster of paris including
scaffolding if necessary all architectural work like
mouldings, cornices, coves, domes, cups as per detailed
drawings and three coats of spray painting to boards etc.
complete. (excluding frame work, runners and mild steel
suspenders)
Spec. No.: As directed by Engineer in charge.
RFG-038 Providing and fixing C.C.T. wood battens 50x25 mm for 77.00 RMT
manglore tile roof work with all iron works, scaffolding
etc. complete.
Spec. No.: As directed by Engineer in charge.
RFG-039 Providing and fixing C.C.T. wood battens 25x12 mm for 58.00 RMT
manglore tile roof work with all iron works, scaffolding
etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 71 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-040 Providing and fixing sky light in RCC roof including MS 1717.00 Sq.Mtr.
frame with all accessories and required fixtures and
fastenings, fitting etc. complete.
Spec. No.: As directed by Engineer in charge.
RFG-041 Providing and fixing PVC false ceiling consisting of 1068.00 Sq.M.
600mm x 600mm 3mm thick plain PVC sheet used as
penel inser in a frame work made using anodised
aluminium Tee section of sizes 1" x 1" (25 x 25mm, 19
gauge or 1mm thick) in square pattern of grid sizes of 2' x
2' (600 x 600 mm). The alluminium frame work is
supported from the ceiling with the help of GI hook and
GI wire/6mm MS rods of required sizes to maintain
proper level etc. The alluminium frame work is supported
on side wall with the used of alluminium 1" x 1" (25 x
25mm) angles. Complete as per direction of engineer,
manufacturer's specifications and drawings.
Spec. No.: As directed by Engineer in charge.
RFG-042 Providing and fixing false ceiling of Gypsum at all height 932.00 Sq.Mtr.
including providing and fixing of frame work made of
special sections, power pressed from M.S. sheets and
galvanized with zinc coating of 120 gms/sqm (both side
inclusive) as per IS : 277 and consisting of angle cleats of
size 25 mm wide x 1.6 mm thick with flanges of 27 mm
and 37 mm, at 1200 mm centre to centre, one flange fixed
to the ceiling with dash fastener 12.5 mm dia x 50 mm
long with 6 mm dia bolts, other flange of cleat fixed to the
angle hangers of 25x10x0.50 mm of required length with
nuts & bolts of required size and other end of angle hanger
fixed with intermediate G.I. channels 45x15x0.9 mm
running at the spacing of 1200 mm centre to centre, to
which the ceiling section 0.5 mm thick bottom wedge of
80 mm with ered flanges of 26 mm each having lips of 10.5
mm, at 450 mm centre to centre, shall be fixed in a
direction perpendicular to G.I. termediate channel with
connecting clips made out of 2.64 mm dia x 230 mm long
G.I. wire at every junction, including fixing perimeter
channels 0.5 mm thick 27 mm high having flanges of 20
mm and 30 mm ong, the perimeter of ceiling fixed to
wall/partition with the help of rawl plugs at 450 mm
/ 72 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
centre, with 25 mm long dry wall screws @ 230 mm
interval, including fixing of 12.5 mm thick gypsum plain
board conforming to IS :2095- part I to ceiling section and
perimeter channel with the help of dry wall screws of size
3.5 x 25 mm at 230 mm c/c, uding jointing and finishing
to a flush finish of tapered and square edges of the board
withrecommended jointing compound , jointing tapes ,
finishing with jointing compound in 3 layers covering upto
150 mm on both sides of joint and two coats of primer
suitable for board, all complete as per drawings,
specification and direction of the Engineer in Charge.
Spec. No.: As directed by Engineer in charge.
RFG-043 Providing and applying two coats of coal tar to roof on new 77.00 Sq.Mtr.
dungaree cloth one coat on each side etc. complete as
directed.
Spec. No.: As directed by Engineer in charge.
RFG-044 Providing and applying one coat of coal tar to roof (without 28.00 Sq.Mtr.
cloth) including scaffoldi g etc. complete as directed.
Spec. No.: As directed by Engineer in charge.
RFG-045 Removing and resetting Mangalore tiles from roof 39.00 Sq.Mtr.
including refixing loose battens.
Spec. No.: As directed by Engineer in charge.
RFG-046 Removing the tiles, battens and dungry cloth from roof, 38.00 Sq.Mtr.
sorting out the serviceable and unserviceable materials and
stacking the same as and where directed in the compound,
scaffolding etc.complete.
Spec. No.: As directed by Engineer in charge.
RFG-047 Removing G.I. or A.C. sheet roofing including purlins, 36.00 Sq.Mtr.
principal rafters etc. including sorting serviceable and
unserviceable materials, stacking the same as and where
directed in the compound including scaffolding etc.
complete.
Spec. No.: As directed by Engineer in charge.
RFG-048 Removing and lowering the roof truss carefully without 146.00 Sq.Mtr.
damaging the members and stacking as and where directed
in the compound including scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 73 /
CIDCO SCHEDULE OF RATES : 2015-2016
Roofing…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RFG-049 Removing R.S. girders of any size and span lowering the 1083.00 MT
same and stacking neatly wherever directed in the
compound scaffolding etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 74 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 75 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 76 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 77 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 78 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 79 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 80 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 81 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 82 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 83 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 84 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 85 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 86 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 87 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 88 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 89 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 90 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 91 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 92 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 93 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 94 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 95 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 96 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 97 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 98 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 99 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 100 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 101 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 102 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 103 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 104 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 105 /
CIDCO SCHEDULE OF RATES : 2015-2016
IRON WORK
Iron Work…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
IRON-001 Providing and fixing mild steel grill work for windows,
ventilators weighing ___ kg per sq.m. as per drawing,
including necessary fixtures, welding and painting with one
coat of anti-corrosive paint etc. complete.
Spec. No.: Bd.U.1Page No. 537
a) 15 Kg per Sq.m. 1129.00 Sqm.
b) 20 kg./sq.m. 1414.00 Sq.m.
IRON-002 Add for extra weight or deduct for less weight for 58.00 Sqm.
fabricating such as cutting, shaping, riveting etc. mild steel
for grill works including welding.
Spec.No. Bd. 1. U. Page No. 583/2012
IRON-003 Providing and fixing mild steel grill railing weighing ______
per sq.m. with C.C. teak wood hand rail of size 75 x 60 mm
and sill of 75 x 25 mm for staircase, and varandah including
fabricating, fixtures, erecting, painting grill work with one
coat of anticorrosive paint and polishing the sill, hand rail
with french polishing complete.
Spec. No.: Bd.U.2 Page No. 583
a) 15 Kg 1909.00 Sqm.
b) 20 Kg 2163.00 Sqm.
c) 30 Kg 2389.00 Sqm.
d) 35 Kg 2677.00 Sqm.
/ 106 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 107 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 108 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 109 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 110 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 111 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 112 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 113 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 114 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 115 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 116 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 117 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 118 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 119 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 120 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 121 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 122 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 123 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 124 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 125 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 126 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 127 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 128 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 129 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 130 /
CIDCO SCHEDULE OF RATES : 2015-2016
MISCELLANEOUS
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Providing and applying two coats of anticorrossive polymer 112.00 Sqm.
001 "Rust-remover" coating to the steel surface by exposing the
reinforcement removing dust, only residue and existing paint
if any throughly and washing the surface with water etc.
complete as directed.
Spec. No.: As directed by Engineer-in-charge
MISCBD- Providing and applying one coat polymer based bonding 125.00 Sqm.
002 chemical poly safe plastone to concrete block surface
including cleaning the existing surface by grinding/wire
brushing etc. complete as directed
Spec. No.: As directed by Engineer-in-charge
MISCBD- Providing and applying _____thick polymer polysafe 265.00 Sqm.
003 plastone based cement mortar 1:3 with river screened sand
in all positions by using approved polymer chemical as per
IS standard to the manufacturers specifications and
instructions and finishing the surface in smooth curing etc.
complete as directed.
Spec. No.: As directed by Engineer-in-charge
a) 12.50 mm 265.00 Sqm.
b) 25 mm 480.00 Sqm.
c) 50 mm 800.00 Sqm.
d) 75 mm 1108.00 Sqm.
MISCBD- Guniting by dry mix process as per IS 9012 (1978) to ceiling
004 sofit etc. in C.M. 1:3, ----- thick under pressure of 2.1 kg to
2.8 kg per sq.cm including forms, scaffolding, floating the
surface, curing for 14 days etc. complete. (Excluding
reinforcement).
Spec. No.: Bd.W.2 Page No. 710
a) 20 mm 365.00 Sq.Mtr.
b) 25 mm 389.00 Sq.Mtr.
c) 40 mm 477.00 Sq.Mtr.
d) 50 mm 588.00 Sq.Mtr.
/ 131 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Guniting by dry mix process as per IS 9012 (1978) to beams
005 in C.M. 1:3, ------ thick under pressure of 2.1 kg to 2.8 kg
sq.cm. including forms, scaffolding, floating the surface,
curing for 14 days etc. complete. (Excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 710
a) 20 mm 377.00 Sq.Mtr.
b) 25 mm 422.00 Sq.Mtr.
MISCBD- Guniting by dry mix process as per I.S. 9012 (1978) to the
006 vertical surface (other than column) in C.M. 1:3, 20 mm.
thick under pressure of 2.1 Kg. to 2.8 Kg per sq.cm.
including forms, scaffolding, floating, the surface curing for
14 days etc. complete. (excluding reinforcement).
Spec. No.: Bd.W.2 Page No. 710
a) 20 mm 350.00 Sq.Mtr.
b) 25 mm 370.00 Sq.Mtr.
MISCBD- Cleaning steel and concrete surface of columns, beams,
007 ceiling etc. by compressed sandblasting including washing
with pressured water including machinery, all lead, labour,
scaffolding etc. complete.
a) By compressed sand blasting 124.00 Sqm.
b) By manually 66.00 Sqm.
Spec. No.: As directed by Engineer-in-charge
MISCBD- Providing and erecting 1.5 metre high wire fencing with 537.00 Rmt.
008 seven rows of barbed wire supported on mild steel angles
(50 mm x 50 mm x 6mm) at 2.5 metres centre to centre
including excavating pits for foundation, fixing posts in
cement concrete blocks of size 45 x 45 x 45 cm. fastening
the wire and painting the mild steel angles with one coat of
red lead primer and two coats of painting etc. complete.
Spec. No.: Bd.W.3 Page No. 712
MISCBD- Providing and fixing mild steel grill gate with angle iron 1824.00 Sqm.
009 frame 65 mm x 65 mm x 10 mm with iron bars at 150 mm
etc. centre to centre and diagonal flats as per the detailed
drawing including hinges pivot blocks locking arrangement
welding, reveting with oil painting in three coats of
approved colour shade (Weight of gate 35 kg/sq.m.)
Spec. No.: Bd.W.6 Page No. 714
/ 132 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISC010 Providing Preconstructional Anti termite treatment by 50.00 Sq.Mtr.
treating the bottom surface and the sides of excavation in
soil with the plinth beam at the rate of 3 litres of emulsion
concentrate of one percent concentration of
CHLORPYRIFOS 20% F.C.ISI approved conforming (I.S.
8944) (i.e. by diluting 5 ltr. of chloropyrifoc 20% EC with 95
ltr. of water) and spraying by high volume sprayer per
sq.mtr. surface area with 10 years guarantee bond as per I.S.
6313 (Part II 1971)
Spec. No.: As directed by Engineer in charge.
MISC011 Providing preconstructional antitermite treatment as per 75.00 Sq.Mtr.
I.S. 6313 (Part-II) treatment by treating the backfill in
immediate contact with foundation at the rate of 7.5 litres
off emulsion concentrate of 0.5 percent of
Clorophyriphas/ Hephoclore per square metre of vertical
surface are covering 10 years guarantee.
Spec. No.: As directed by Engineer in charge.
MISC012 Providing preconstructional antitermite treatment as per 50.00 Sq.Mtr.
I.S. 6313 (Part-II) by treating the top surface of plinth filling
at the rate of 5 litres of emulsion concentrate at 0.5 percent
of Hephoclore per square metre of surface area covering ten
years guarantee.
Spec. No.: As directed by Engineer in charge.
MISC013 Providing preconstructional antitermite treatment as per 98.00 Sq.Mtr.
I.S. 6313 (Part-I) to the soil along the external face of
building by punching holes of 1.2 of 1.5 C.M. diametre
about 30 percent of Clorophysiphas/20 E.C. Heptaclor at
the rate of 7.5 litres emulsion concentrate per hole and
sealing the same with proper filling & covering 10 years
guarantee.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing exhaustive Anti termite treatment to the wooden 37.00 No.
014 frames by drilling 6 mm holes at four corners or as directed
on one side at downward angle of 45 degree at junction of
wood work and masonary and in between as instructed by
Engineer as per requirement at the rate of 60 ml of
chlorpyrifos of 20% emulsion concentrate and filling with
putty etc. with two years guarantee bond as per I.S. 6313
(Part III) of 1981
Spec. No.: As directed by Engineer in charge.
/ 133 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Providing exhaustive Anti termite treatment to the wooden 20.00 Joint
015 beams by injecting antitermite emulsion at four corners or
as directed on one side at downward angle of 45 degree at
junction of wood work and masonary and in between as
instructed by Engineer as per requirement at the rate of 80
ml of chlorpyrifos of 20% emulsion concentrate per joint as
per requirent and filling with putty etc. with two years
guarantee bond as per I.S. 6313 (Part III) of 1981.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing exhaustive Anti termite treatment to the sides of 12.00 One Hole
016 flooring by injecting 1 % of chloropyrifol emulsion
concentrate at the rate of 50 ml per hole of 6 mm dia.
drilled at a distance of 30 cms centre to centre or more as
per requirement and sealing the same with proper filling
with two years guarantee bond as per I.S. 6313 (Part III) of
1981
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing exhaustive Antitermite treatment around the 30.00 Sqm.
017 periphery by excavating trenches of 20 cms. Width and
exposing the side of columns and plinth beams upto a
depth of 300 mm by injecting one percent of cholordane
emulsion concentrate at the rate of 2.25 litres per running
metre or more as per requirement with two years guarantee
bond as per I.S. 6313 (Part III) of 1981
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing general pest control services to the building to 16.00 Sqm.
018 control the nuisance of cockcroaches, lizards, bedbugs and
other insects etc. with four operations in a year and monthly
check up.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing general pest control services to all size inspection 83.00 No.
019 chambers to control nuisance of cockcroaches during the
year with monthly check up.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling Mangalore tiled roof and ridge tiles with 38.55 Sqm.
020 battens, ridge and barge boards, eaves boards etc. and
stacking the materials as directed with all leads and lifts etc.
complete, including removing wood work below.
/ 134 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Dismantling and resetting Mangalore tiles from roof 26.75 Sqm.
021 including refixing loose battens etc. complete.
MISCBD- Dismantling G.I. and A.C. sheet roof covering and stacking 10.00 Sqm.
022 them and where directed in the compound including
scaffolding etc. complete.
Spec. No.: BdW- 8 Page No. 716
MISCBD- Dismantling G.I. And A.c. sheet roofing including purlins 24.65 Sqm.
023 and rafters etc. including sorting out serviceable and
unserviceable material and stacking them as and where
directed in the compound, including scaffolding etc.
complete.
MISCBD- Dismantling R.S. girders of any size and span lowering the 1158.85 M.T.
024 same and stacking neatly wherever directed in the
compound, scaffolding etc. complete for all height.
MISCBD- Removing double country tiled roof with ridge and
25 battens and stacking the materials as directed with all etc.
and leads and lifts, complete including removing wood
work below.
Spec. No.: Bd.W.8 Page No. 716
MISCBD- Dismantling planking from roof or ceiling and stacking 22.00 Sqm.
026 them as directed with all leads and lifts etc. complete.
Spec. No.: Bd.W.8 Page No. 716
MISCBD- Dismantling queen post truss from roof and stacking the 731.00 No.
027 materials as directed with all leads and lifts etc. complete.
Spec. No.: Bd.W.8 Page No. 716
MISCBD- Dismantling king post truss from roof and stacking the 496.00 No.
028 materials as directed with all leads and lifts etc. complete.
Spec. No.: Bd.W.8 Page No. 716
MISCBD- Dismantling other type of truss below 5 m. span from roof 361.00 No.
029 and stacking the materials as directed with all leads and lifts
etc. complete.
Spec. No.: Bd.W.8 Page No. 716
MISCBD- Dismantling flat wooden or A.c. sheet ceiling with frame 24.00 Sqm.
030 work including scaffolding, stacking the materials as
directed with all leads and lifts etc. complete.
Spec. No.: Bd.W.8 Page No. 716
/ 135 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISC031 Removing cloth ceiling including frame work and 10.00 Sq.Mtr.
stacking the materials as directed with all leads, lifts,
complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling brick masonry in Mud and stacking the 111.00 Sq.Mtr.
032 materials as directed with all leads lifts, complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling the tiles battens and dungree cloth, purlins, 40.70 Sqm.
033 rafters, ridges etc. from roof, sorting out serviceable and
unserviceable materials and stacking the same as and where
directed in the compound scaffolding etc. complete.
MISCBD- Dismantling battens from roof including scaffolding if 4.00 Rmt.
034 required, and stacking them as directed with all leads and
lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing matting from roof and stacking as 9.00 Sq.Mtr.
035 directed with all leads and lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling purlins from roof including including 9.00 Rmt.
036 scaffolding if required, stacking them as directed with all
leads and lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling rafters from roof including including 9.00 Rmt.
037 scaffolding if required, stacking the materials as directed
with all leads and lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing cloth partition with frame work and 8.00 Sq.Mtr.
038 stacking the materials as directed with all leads, lifts etc.
complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing Jute Kanthan (Tarat) screen to the 42.00 Sq.Mtr.
039 scaffold-ing for external guniting as directed including
removing the same after the work is over etc complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling doors and windows with frames and stacking 70.00 No.
040 the materials as directed with all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 136 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Dismantling doors and windows shutters without frames 27.00 No.
041 and stacking the materials as directed with all leads, lifts etc.
complete.
Spec. No.: BdW- 8 Page No. 716
MISCBD- Dismantling ventilators and small windows with frames and 66.00 No.
042 stacking the materials as directed with all leads, lifts etc.
complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling ventilators and small windows shutters without 72.00 No.
043 frames and stacking the materials as directed with all leads,
lifts etc. complete.
Spec. No.: BdW- 8 Page No. 716
MISCBD- Dismantling wooden or A.C. partition including frames 36.00 Sqm.
044 work and stacking the materials as directed with all leads,
lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling teak wood trellies work with frame including 19.00 Sqm.
045 stacking the materials as directed with frame, all leads, lifts
etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling cement or lime plaster including disposing off 14.00 Sqm.
046 the spoils as directed with all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling teak wood paneled/ partly / glazed /veneer 17.00 Sqm.
047 partitions carefully without damaging the frame or panel and
stacking the same as and where directed completed.
MISCBD- Dismantling cement tiles or marble or polished shahabad 20.00 Sqm.
048 floor or dado without bed concrete including stacking the
material as directed with all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling Shahabad or Tandur stones from floor without 19.00 Sqm.
049 bed concrete including stacking the material as directed with
all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling brick bat coba including stacking the spoils as 259.00 Cum.
050 directed with all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 137 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Dismantling trap stone from floor without bed concrete 42.00 Sqm.
051 including stacking the materials as directed with all leads,
lifts etc. complete.
Spec. No.: BdW- 8 Page No. 716
MISCBD- Dismantling wire fenching with wooden post stacking the 22.00 Rmt.
052 materials with all leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling wire fenching with iron/cement concrete 28.00 Rmt.
053 fencing posts and stacking the materials as directed with all
leads, lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling iron pipe railing having wooden R.C.C. or 29.00 Rmt.
054 cement concrete or iron posts and stacking the materials as
directed.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing old paint from steel and other metal surface with 35.00 Sqm.
055 flame, cleaning and making the surface even and clean with
scaffolding etc. complete.
Spec. No.: BdW- 8 Page No. 716
MISCBD- Scraping old paint from steel and other metal surface with 10.70 Sqm.
056 hand scrapping, cleaning and making the surface even and
scaffolding etc. complete.
MISCBD- Dismantling water proofing treatment from terrace 7.50 Sqm.
057 including Indian Patent stone Brick bat coba 15 to 18 cm.
Thick without damages to structure, levelling and cleaning
the surface for providing new water proofing treatment and
stacking the debris upto a distance of 50m. complete as
directed.
MISCBD- Dismantling all types of existing water proofing treatment 25.00 Sqm.
058 from terrace including Indian Patent stone Brick bat coba 15
to 18 cm. Thick without damages to structure, levelling and
cleaning the surface for providing new water proofing
tratment etc. complete as directed.
MISCBD- Dismantling earthen stoneware pipes and stacking them as 10.00 Rmt.
059 directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge
/ 138 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Dismantling cast iron or wrought iron as AC pipe and 10.00 Rmt.
060 stacking them as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge
MISCBD- Dismantling urinals pans or wash hand basins with frame, 53.00 No.
061 including disconnecting the sanitary and wate supply
connections, removing the same carefully and stacking the
serviceable materials as and where directed including
throwing the unserviceable materials outside.
Spec. No.: As directed by Engineer in charge
MISCBD- Dismantling W.C. pans including disconnecting the sanitary 88.00 No.
062 and water supply connections, removing and breaking
flooring and bed concrete around pans and removing the
pan carefully and throwing out the refusal outside etc.
complete.
Spec. No.: As directed by Engineer in charge
MISCBD- Dismantling existing brick bat coba in the W/C and toilets 895.00 No.
063 including removing the dismantelled stuff outside the
rooms, including stacking and cleaning surface etc.
complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling carefully the existing structure of stone 162.00 Cum.
064 masonary in cement or lime mortar, including sorting out
serviceable materials and stacking the dismantled material
within 50 meter neatly as directed.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing lime or lean cement concrete including 237.00 Cum.
065 stacking the spoils as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing rich mix cement concrete including 399.00 Cum.
066 stacking the spoils as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling brick masonry in lime or cement mortar and 140.00 Cum.
067 stacking the materials as directed with all leads, lifts,
complete.
Spec. No.: As directed by Engineer in charge.
/ 139 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Dismantling stone masonry in mud including stacking 114.00 Cum.
068 the materials as directed with all leads, lifts, complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling carefully the existing plain concrete, including 310.30 Cum.
069 stacking the materials neatly within 50 meter lead as
directed.
MISCBD- Dismantling R.C.C. work including breaking concrete by 614.00 Cum.
070 chiselling, wedging etc. including cutting the reinforcement,
stacking the serviceable materials and the debris separately
upto a distance of 50 meter or spreading the debris as
directed complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing NP-2 and NP-3 class pipes including stacking at
071 road side as directed by the Engineer in charge.
Spec. No.: As directed by Engineer in charge.
a) Upto 900mm dia. 130.00 RMT
b) 900mm dia. and above 152.00 RMT
MISCBD- Removing single country tiled roof with battens and stacking 30.00 Sq.Mtr.
072 the materials as directed with all leads and lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Dismantling wooden floor including beams and joists, 15.00 Sqm.
073 including scaffolding if required, stacking the materials as
directed with all leads lifts etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Scraping out old white wash/colour wash by brushing and 2.15 Sqm.
074 or scrapping by sand paper and preparing the wall surface
smooth including necessary repairs to scratches, disposing of
rubbish within compound etc. complete.
MISCBD- Scraping the old surface with sand paper and coating it with 8.00 Sqm.
075 mixture of whiting or glue and linseed oil including
scaffolding, disposing of rubbish within compound etc.
complete.
Spec. No.: BdW-8 Page No. 716
MISCBD- Removing grass gazer grass and disposing off out 4.00 Sq.Mtr.
076 of building premises including making clean the ground by
showel and phavaras etc. complete.
Spec. No.: As directed by Engineer in charge.
/ 140 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Labour charges for applying two coats of alluminium paint 289.00 No.
076 for flag-post including preparing the surface and primer coat
etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Removing old paint from steel and other old surface 24.65 Sqm.
077 preparing the surface by solvent degreasing and derusting by
manual scraping, flame cleaning and chemical methods,
hand scraping, scaffolding etc. complete.
MISCBD- Cutting holes in brick masonry walls to receive ends of 24.65 No.
078 Girders of any size including scaffolding etc. complete.
MISCBD- Cutting holes of any size in stone masonry walls to receive 35.30 No.
079 ends of Girders of any size and making good the damages
done including scaffolding complete.
MISCBD- Removing and Lowering the roof truss carefully without 390.50 No.
080 damaging the members and stacking as and where directed
in the compound including scaffolding complete.
MISCBD- Lowering debris of the existing water proofing treatment 148.00 Cum.
081 from the terrace by any means without causing dust
nuisance and damages to structure, stacking the same as and
where directed including cleaning the site complete.
Spec. No.: BdW- 8 Page No. 715
MISCBD- Providing & Fixing PVC sheet wall Paneling of thickness 1393.00 Sq.Mtr.
082 5mm consisting of paneis having size 1220mm x 2440mm
stuck
Spec. No.: As directed by Engineer-in-charge
MISCBD- Providing and fixing 40mm diameter and 1.5mm thick 650.00 RMT
083 Stainless steel railing in S.S.304 Grade including fabricating,
fixtures, errecting, necessary welding, griding, finishing,
buffing to stainless steel pipe etc. complete.
Spec. No.: As directed by Engineer Incharge
MISCBD- Providing, fabricating and supplying and fixing panels 4473.00 Sq.Mtr.
084 of aluminium composite panel (ACP) cladding in pan shape
in metalic colour of approved shades made out of 4mm
thick aluminium composite panel material consisting of
3mm thick FR grade mineral core sandwiched between
two aluminium sheets (each 0.50mm thick). The aluminium
composite panel cladding sheet shall be coil coated with
/ 141 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
kynar 500 base PVDF / Lumiflon based fluoropolymer
resin coating of approved colour and shade on face 1 and
polymer (service) coating on face 2 as specified using
steinless steel screws, nuts, bolts, washers, cleats, weather
silicon, sealent, backer rods etc. The supporting frame
structurre shall be made of aluminium rectangular section 38
x 38 mm. The fastening brackets of aluminium alloy 6005
T5/ MS with hot deep galvinised with serrations and
serrated washers to arrest the witn load movement,
fasteners, SS 316 pins and anchor bolts of approved make in
SS 316, nylon separators to prevent bi-metallic contacts or
complete required to perform as per specification and
drawing. (Prior Approval from S.E.'s essential)
MISCBD- Carrying out the Structural Audit of buildings with 42.00 Sq.Mtr.
085 a) Visually inspecting the Building for structural
inconsistency. Overloading abnormal exposure safety
consideration.
b) Non destractive testing
c) Preparing final report
d) Preparing BOQ for the structural repairs suggested.
e) Submitting all drawing report in 10 copies
MISCBD- Providing and erecting chainlink fencing 1.6 mt. height with 1629.00 Sqm.
086 G.I. chainlink of size 50 x 50mm 8 gauge thick and fixed
75mm above ground level vertical MS angle of 40x40x6 mm
size embedded in CC M-15 block of size 45x45x67 cms. At
1.75 mt. c/c with iron bar 16mm dia. as hold fast including
welding link with angle frame at 30 cm. c/c nuts and bolts
and horizontal MS angles at top and bottom of 25x25x5
mm size and vertical MS flat 35x5 mm and 25x5 mm
horizontal including cross support of 40x40x6 mm angles
both sides at every corner or bends embedded in C.C. M-15
block of size 45x45x67 cms. including 3 coats of oil
painting etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and erecting 1.2 meter high wire fencing with five 437.00 RMT
087 rows of barbed Wire supported on mild steel angle post
including excavation of pits of foundation concrete
fixing the posts in (1:4:8) cement concrete block and
fastening the Wires. Spec. No.: Bd. W. 3, Page No. 712
/ 142 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
MISCBD- Providing and erecting concertina coil 'Y' type barbed wire 745.00 RMT
088 fencing 1.5 meter high with seven rows of wire with 2.45
mm dia (Rezan/ concentina ire 0.60 mm dia ) with hot dip
and G.I. coated hooks as per drawing supported on M.S.
angle 50 x 50 x 6 mm at 2.5 mtr. c/c including fixing and
fastening with wire, painting M.S. angles with one coat of
red lead primer and two coat of oil paint etc. complete.
(Excluding C.C. Block)
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing rain tattis with bamboos and karve 56.00 Sq.Mtr.
089 grass with 75 mm thick grass and removing the same after
rain is over (size of bamboos 50mm to 75mm. dia and 3 M
to 3.5 M. long.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing grass chhapper (roof) with necessary 74.00 Sq.Mtr.
090 bamboos and karve frame with 75 mm. thick grass etc,
removing the same after rain is over (size of bamboos 50
mm to 75 mm dia and 3 M to 3.5 M. long.)
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing grass chhapper (roof) with 66.00 Sq.Mtr.
091 necessary bamboos and karve frame with 75 mm. thick
grass etc, removing the same after rain is over (size of
bamboos 25 mm dia and 3 M. to 3.5 M. long
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing Bamboo Matting screen for partition 112.00 Sq.Mtr.
092 with bamboo sticks.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing lightening conductor system 15141.00 No.
093 comprising of errecting Air-Termination consisting of
tubular copper rod of 25mm dia. 1.2mm thick with multiple
points head 1.2mt. long (Heavy Duty) welded or clamped
to G.I. pipe pole B Grade 50mm dia. of required length
with M.S. round base plate 25cm. diam. and 10cm thick
at bottom embeded in cement concrete 1:3:6 foundation
of size 45cm diam. x 45cm Height and providing earthing
with copper earth plate of size 60 x 60 x 0.3cms with
cadmium plated nut bolts to fix earthing strip burried in
/ 143 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
specially prepared earth pit 1.5 metre below ground level
with 40 Kg charcoal and salt with alternate layers of
charcoal and salt and G.I. pipe 40mm dia. 2mt. length
burried in earth upto earthing plate remaining portion
above ground level for watering and refilling complete.
Spec. No.: BDW 1 Page 709
MISCBD- Providing and fixing copper strip 25 mm wide and 112.00 RMT
094 3 mm thick for lightening conductor including fixing with
screws required scaffolding etc. complete.
Spec. No.: BDW 1 Page 709 as directed Enginner in charge
MISCBD- Providing and fixing in position alluminium strips of size 50 568.00 RMT
095 mm. x 3 mm. for nosing of steps including fixing with
screws and raval plugs, bending and cutting to the required
shape and size, finishing etc. complete.
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing crimped wire G.I. mesh of size 20mm 680.00 Sq.Mtr.
096 x 20mm 10 guage to iron angle frame including welding
crimp mesh to angle frame and steel flat, fixing the frame in
its original position and oil painting etc. complete.
(excluding cost of structural steel)
Spec. No.: As directed by Engineer in charge.
MISCBD- Providing and fixing 90 cm. x 60 cm. Marble plate 7302.00 No.
097 engraving 10cm.height letter, figures including painting the
letters/figures with approved colour and shade complete.
Spec. No.: Bd.W.7 Page No. 715
MISCBD- Providing and fixing 90 cm. x 60 cm. Granite plate 8095.00 No.
098 engraving 10cm. height letter, figures including painting the
lefters/figures with approved colour and shade complete.
Spec. No.: Bd.W.7 Page No. 715
MISCBD- Providing and fixing PVC sheet wall panelling of thickness 1489.45 Sqm.
099 5mm consisting of panels having size 1220 mm x 2440 mm
stuck on inner frame work of 50mm wide strips of 5mm
thick PVC sheet. The strips should have in their center a
/ 144 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
grove of 6mm width and 1mm depth for sinking the head
of the screw used to fix the strips to the wall vertically at an
equal interval of 10" between two PVC strips. The PVC
strips shall be fixed to the wall using 65mm long MS screws
through the groove in the strip by using PVC fasteners.
The distance between two screws shall not be more than
200mm. A grove of 2mm may be left at joint of two panels
for aesthetic looks. The exact size of the panel and
correspondingly of the greed may vary depending on the
size of the wall. Optionally a strips of 5mm thick PVC sheet
of width 75mm feathered at the edges shall be stuck at the
places where two panels are joined, using solvent cement
and as directed by Engineer.
/ 145 /
CIDCO SCHEDULE OF RATES : 2015-2016
ROAD WORKS
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-001 Cutting Down trees With girths of ……cm including
trunck and branches and stacking the materials neatly
within a lead of 50m. as directed etc.complete.
Spec. No.: RD-1 Page No. 349/2012
a) 30 to 60 cm 423.00 No.
b) 60 to 90 cm 559.00 No.
c) 90 to 180 cm 716.00 No.
d) 180 to 270 cm 781.00 No.
e) 270 to 450 cm 857.00 No.
f) above 450 cm 939.00 No.
RD-002 Excavation for roadways in all types of soil, soft murum,
hard murum, hard murum with boulders, in all
conditions and nature, including clearing and stripping of
the area, removal of vegetation, shrubs, taking spot levels,
excavating to required depth, line, level and slope, leveling
and dressing and consolidating the excavated surface,
dewatering by all means upto any extent of water
accumulated from any source, sorting out and stacking
serviceable and unserviceable materials etc. complete
including conveying the excavated material with all lifts and
upto a lead of 50 mtr & its spreading or stacking as
directed, etc. complete.
Note :
1) All payments towards the fees, taxes etc. shall be borne
by the contractor.
Spec. No.: Rd. 2 Page No. 351/2012
A) By manual means
i) earth soil of all sorts sand, gravel or soft murum 113.00 Cu.M.
b) hard murum 122.00 Cu.M.
c) hard murum and boulders 136.00 Cu.M.
d) soft rock 282.00 Cu.M.
B) By Mechanical means
a) earth soil of all sorts sand, gravel or soft murum 60.00 Cu.M.
/ 146 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
b) hard murum 66.00 Cu.M.
c) hard murum and boulders 72.00 Cu.M.
d) soft rock 140.00 Cu.M.
RD-003 Excavation for roadway in hard rock by blasting 220.00 Cum.
including dewatering by all means upto any extent, dressing
to the required grade, camber and side slopes and
conveying the excavated material with all lifts and lead and
stacking etc. complete.
Notes :
1) All payments towards the fees, taxes etc. shall be
borne by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for
Royalty Payment.
Spec. No.: Rd. 6 Page No. 356/2012
RD-004 Excavation for roadway in hard rock/ manjra rock by 800.00 Cum.
wedging, chiseling or line drilling including dewatering
by all means upto any extent, dressing, sectioning to the
required grade, camber and side slopes and conveying the
excavated material with all lifts and lead, including boulders
upto 5 cum and stacking etc. complete.
Note :
All payments towards the fees, taxes etc. shall be borne by
the contractor.
Spec. No.: Rd. 6 Page No. 356/2012
RD-005 Excavation for foundation / pipe trenches in slush muddy 398.00 Cum.
/ marshy / slushy / soil, including use of poclain, labour
for dewatering during execution including removing the
excavated material up to a distance of 50 mtrs. and lifts as
below, stacking and spreading as directed, preparing the
bed by cleaning the mux, including shuttering item but
excluding back filling etc. complete.
RD-006A “Providing earthwork in embankment with approved 280.00 Cum.
materials obtained from Contractors own source
including all leads and lifts, laying in layers of 20 to 30cms
in thickness, breaking clods, dressing to the required lines,
curves, grades, and section with watering & compacting
/ 147 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
with vibratory power roller etc. complete with 95% P.D.
Notes:-
1. All payments towards the fees, taxes etc. shall be
borne by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at
Rs.1/m3 of gross volume computed without
deductions as mentioned for the RA Bills or Final
Bills.
4. P.D. Tests shall be carried out @ one test comprising
of 3 specimens average result per 1000 m2 area.
5. Compaction upto 95% Modified P.D. and the
laboratory soil dry density shall be not less than 1.6
g/cc. at Optimum moisture content.
6. The gross volume of the embankment shall reduced
by 5% for RA Bills and 1% for Final Bill payments.
RD-006A1 Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
RD-006B “Providing earthwork in embankment with approved 286.00 Cum.
materials obtained from Contractors own source
including all leads and lifts, laying in layers of 20 to 30cms
in thickness, breaking clods, dressing to the required lines,
curves, grades, and section with watering & compacting
with vibratory power rollers etc. complete with 97%
M.P.D..
Notes:-
1. All payments towards the fees, taxes etc. shall be
borne by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at
Rs.1/m3 of gross volume computed without
deductions as mentioned for the RA Bills or Final
Bills.
4. P.D. Tests shall be carried out @ one test comprising
of 3 specimens average result per 1000 m2 area.
/ 148 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
5. Compaction upto 97% Modified P.D. and the
laboratory soil dry density shall be not less than 1.75
g/cc. at Optimum moisture content.
6. The gross volume of the embankment shall reduced
by 5% for RA Bills and 1% for Final Bill payments.
RD-006B1 Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
RD-006C “Providing earthwork in embankment with approved 289.00 Cum.
materials obtained from Contractors own source
including all leads and lifts, laying in layers of 20 to 30cms
in thickness, breaking clods, dressing to the required lines,
curves, grades, and section with watering and compacting
with vibratory power rollers etc. complete with 98%
M.P.D..
Notes:-
1. All payments towards the fees, taxes etc. shall be
borne by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at
Rs.1/m3 of gross volume computed without
deductions as mentioned for the RA Bills or Final
Bills.
4. P.D. Tests shall be carried out @ one test comprising
of 3 specimens average result per 1000 m2 area.
5. Compaction upto 98% Modified P.D. and the
laboratory soil dry density shall be not less than 1.75
g/cc. at Optimum moisture content.
6. The gross volume of the embankment shall reduced
by 5% for RA Bills and 1% for Final Bill payments.
RD-006C1 Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
for Embankment and filling etc. for Item No. ___ above as
directed by Engineer.
RD-007A “Providing earthwork in embankment with approved 187.00 Cum.
materials obtained from the road cutting with a lead of
1.00 KM including all lifts, laying in layers of 20 to 30 cms
in thickness, breaking clods, dressing to the required lines,
/ 149 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
curves, grades, and section with watering and compacting
with vibratory power rollers etc. complete with 95% P.D..
Notes:-
1. All payments towards the fees, taxes etc. shall be
borne by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at
Rs.1/m3 of gross volume computed without
deductions as mentioned for the RA Bills or Final
Bills.
4. P.D. Tests shall be carried out @ one test comprising
of 3 specimens average result per 1000 m2 area.
5. Compaction upto 95% Modified P.D. and the
laboratory soil dry density shall be not less than 1.6
g/cc. at Optimum moisture content.
6. The gross volume of the embankment shall reduced
by 5% for RA Bills and 1% for Final Bill payments.
RD-007A1 Royalty Charges for murum, and ordinary earth to be used NIL
for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
RD-007B Providing earthwork in embankment with approved 193.00 Cum.
materials obtained from the road cutting with a lead of
1.00 KM including all lifts, laying in layers of 20 to 30 cms
in thickness, breaking clods, dressing to the required lines,
curves, grades, and section with watering and compacting
with vibratory power rollers etc. complete with 97% M.P.D.
Notes:-
1. All payments towards the fees, taxes etc. shall be borne
by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at Rs.1/m3
of gross volume computed without deductions as
mentioned for the RA Bills or Final Bills.
4. P.D. Tests shall be carried out @ one test comprising of
3 specimens average result per 1000 m2 area.
/ 150 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
5. Compaction upto 97% Modified P.D. and the
laboratory soil dry density shall be not less than 1.75
g/cc. at Optimum moisture content.
6. The gross volume of the embankment shall reduced by
5% for RA Bills and 1% for Final Bill payments.
RD-007B1 Royalty Charges for murum, and ordinary earth to be used NIL
for Embankment and filling etc. for Item No. ___ above as
directed by Engineer.
RD-008 Picking the road surface including sectioning and removing 5.00 Sqm.
the grass, shrubs etc. complete (murum surface).
Spec. No.: Rd. 30 Page No. 381/2012
RD-009 Picking the existing WBM road surface, removing all the 10.00 Sqm.
caked mud, etc and exposing the metal surface, loosening
the existing metal, disposing off the picked up material as
directed, including watering, sectioning, grading, diversion
of traffic, all labour, materials, use of tools etc complete.”
Spec. No.: Rd. 30 Page No. 381/2012
RD-010 Picking the road surface including sectioning and removing 13.00 Sqm.
the thin soil layer & exposing B.T. surface etc. complete.
Spec. No.: Rd. 30 Page No. 381/2012
RD-011 Watering and compacting of embankment formed of 70.00 Cu.Mt.
materials obtained from the road cutting, within a lead of
50m to 100% of standard proctor density after laying them
in layers of 20 to 30 cm with Static roller etc. complete.
Spec. No.: Rd.10 Page No. 359/2012
RD-012 Watering and compaction of embankment formed of 73.00 Cum.
material obtained from the road cutting / departmental
land within a lead of 50 m. with vibratory roller to 95%
P.D. including laying material in layers of 20 to 30 cm. The
test shall be conducted to ascertain the strength by the way
of conducting C.B.R. Test as per IS 2720 (Part-16) at every
3000 sq.m. or part of it and separate payment shall be paid
for the test.
Spec. No.: Rd.10 Page No. 359/2012
RD-013 Providing and laying dry trap rubble stone soling of 807.00 Cum.
specified thickness including hand packing with 80mm
metal and rubble chips, filling up the voids with stone grit,
to the required line, curve, grade and section, watering and
hand packing etc. complete.
/ 151 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-014 Providing & Laying hard core with 80 mm oversize trap 739.00 Cum.
metal in layers of 150 mm thickness including filling voids
with rubble chips and stone grit ramming, watering etc
complete.
RD-015 Supplying 60mm oversize trap metal at the roadside. The 772.00 Cum.
rubble shall be either handbroken or mechanically crushed
to pieces so as to pass through mesh of 80mm internal
dimension and retained on a square mesh of 50mm. The
item includes all lead and lifts, conveying to site and
stacking etc complete.
RD-016 Supplying 80mm oversize trap metal at the roadside. The 739.00 Cum.
rubble shall be either handbroken or mechanically crushed
to pieces so as to pass through mesh of 80mm internal
dimension and retained on a square mesh of 50mm. The
item includes all lead and lifts, conveying to site and
stacking etc complete.
RD-017 Supplying 50mm size trap metal at the roadside. The rubble 789.00 Cum.
shall be either handbroken or mechanically crushed to
pieces so as to pass through mesh of 60mm internal
dimension and retained on a square mesh of 40mm. The
item includes all lead and lifts, conveying to site and
stacking etc complete.
RD-018 Providing dry rubble stone pitching 23 cm thick as directed, 142.00 Sqm.
etc. complete.
Spec. No.: Rd. 60 Page No. 413
RD-019 Supplying …….mm. crushed metal of trap / granite /
quartzite / gneiss stone aggregate at the road side, including
conveying and stacking etc. complete for use in bituminous
road surface.
Spec. No.: Rd. 33 Page No. 382
a) 40 mm. 686.00 Cu.Mt.
b) 25 mm. 720.00 Cu.Mt.
c) 20 mm. 740.00 Cu.Mt.
d) 12 mm. 750.00 Cu.Mt.
e) 10 mm. 760.00 Cu.Mt.
f) 6 mm. 770.00 Cu.Mt.
/ 152 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-020 Providing, laying, spreading and compacting stone
aggregates of specified sizes to water bound macadam as
per clause 404 of M.O.R.T.&H. (2001) specifications,
including spreading in uniform thickness, hand packing
rolling with 3 wheeled steel / vibratory roller 8-10 tonnes
camber, applying and brooming requisite type of screening,
binding materials to fill up the interstics of coarse
aggregates, watering and compacting to the required density
making necessary earthen bund to protect edges, lighting,
guarding, barricading and maintenance of diversion etc.
complete.
as per techenical specification Cl. No. 405A
a) By manual means
i) Grading - I (90 mm to 45 mm) 1338.00 Cum.
ii) Grading - II (63 mm to 45 mm) 1405.00 Cum.
b) By mechanical means metal spreading is to be done
by motor graders
i) Grading - I (90 mm to 45 mm) 1204.00 Cum.
ii) Grading - II (63 mm to 45 mm) 1265.00 Cum.
RD-021 Providing and laying......... milimeter thick modified
penetration macadam over prepaied based by spreading size
metal layers of 40 mm nominal size of 30% crusher broken
and 70% Hand broken with compaction with power roller
heating and spraying bitumen with sprayer @ of 200 kg per
100 Sq.mtr. spraying key aggregate (12 mm size chips) and
final compaction with power roller
(Spec.No.IRC-SP-20/2002 appendix 8.4 PageNo. 215)
A With SCADA with fully automatic micro processor
based PLC attachment
(a) 50 mm thick
i) over W.B.M. surface. 152.00 Sqm
ii) Over B.T. surface 175.00 Sqm
(b) 75 mm thick
i) over W.B.M. surface. 185.00 Sqm
ii) Over B.T. surface 196.00 Sqm
/ 153 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
B Without SCADA.
(a) 50 mm thick
i) over W.B.M. surface. 149.00 Sqm
ii) over B.T. surface 173.00 Sqm
(b) 75 mm thick
i) over W.B.M. surface. 183.00 Sqm
ii) over B.T. surface 193.00 Sqm
/ 154 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-025 Providing and applying primer coat with bitumen
emulsion on prepared surface of granular Base including
clearing of road surface and spraying primer using
mechanical means (Reference to MORT&H's specification
clause 502).
a) On G.S.B./WBM at 7.5 Kg /100 Sqmt. 37.00 Sqm
b) on B.T.surface at 50 Kg / 100 sqmt. 52.00 Sqm
RD-026 Providing and applying liquid seal coat type "A" comprising 79.00 Sqm
of a layer of bituminous binder @ 9.8 kg/ 10 Sqm
(including cost of antistripping compound wherever
required) followed by a cover of stone chipping @ 0.09
cum/10 sqm of specified grading and rolling with power
roller 8-10 tonne complete as per clause 513 of MoRT&H
specification including all material, labour, machinery,
lighting, guarding and maintenance of diversion, With
Bitumen VG-grade 30(Grade 60/70)
RD-027 Providing and laying open graded premix carpet 20 mm
thick with specified graded crushed aggregate for wearing
course including supplying all materials preparing and
cleaning base, loading of aggregate with front edge loader,
heating bitumen and aggregate in modern drum mix type of
hot mix plant transporting the mix material from tipper and
laying ....... to required level and grade rolling with power
roller. (Using Bulk Asphalt VG30 (60/70) grade) (excluding
tack coat)
Spec. No. MORT&H Clause 510
a) Without paver. Without SCADA. Laying by Manual 132.00 Sqm
means. ( For B.T. Works cost less than 75.00 lacs)
b) With paver. Without SCADA. By Mechanical means. 128.00 Sqm
c) With paver. With SCADA. 129.00 Sqm
RD-028 Providing and laying Pavement Quality Concrete (PQC) of
M-40 grade (cast in situ) of trap metal including providing
125 micron thick impermeable plastic sheet membrane over
the surface to be covered,coarse and fine aggregates of
specified gradation using minimum cement content of 350
kg/cum., approved admixtures, mixing as per the design
mix to the specified workability, providing necessary side
/ 155 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
forms,rails and guidewires,transporting the mix with transit
mixers and laying and spreading within fixed form by
mechanical auger and compacting with plate vibrator and
minimum ten needle vibrators,curing with approved resin
based aluminised reflective curing compound and covering
with moist hessian or ponding and sprinkling of water for a
minimum period of 14 days,fixing dowels,tie-bars,cutting
joints,joint- fillers,sealants and all types of joints and
finishing to the desired surface texture including all
material,labour,machinery with all leads and lifts etc
complete.With Scada (Prior permission of S.E. is essential )
Spec. No.: MORT&H Clause 602
a) Without flyash 6408.00 Cu.Mt.
b) With flyash 6034.00 Cu.Mt.
RD-029 Providing and laying in situ cement concrete road pavement
of Using Concrete Mixer ....... grade,including supplying all
materials, providing steel form work, compaction by plate
vibrator, providing joints at every thirty meters internal and
filling the joints with bitumen,curing etc.complete.
(Excluding cost of reinforcement) (Newly laid concrete
shall be covered by gunny bag/plastic sheet/tarpaulin etc.
for curing period complete.)
Spec. No.: As directed by Engineer-in-charge
a) PCC M20 5366.00 Cu.Mt.
b) PCC M25 5565.00 Cu.Mt.
c) PCC M30 5737.00 Cu.Mt.
d) PCC M35 5830.00 Cu.Mt.
RD-030 Providing and laying in situ cement concrete road pavement
of Using Batching plant,transit mixer and concrete
pump.(RMC) .......... grade,including supplying all materials,
providing steel form work, compaction by plate vibrator,
providing joints at every thirty meters internal and filling the
joints with bitumen,curing etc.complete. With SCADA with
fully automatic micro processor based PLC attachment
(Excluding cost of reinforcement) (Newly laid concrete
shall be covered by gunny bag/plastic sheet/tarpaulin etc.
/ 156 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
for curing period complete.) Prior Approval of S.E.'s
essential
Spec. No.: As directed by Engineer-in-charge
a) PCC M20 4941.00 Cu.Mt.
b) PCC M25 5109.00 Cu.Mt.
c) PCC M30 5276.00 Cu.Mt.
d) PCC M35 5363.00 Cu.Mt.
RD-031 Providing R.C.C.(M-15) 5th kilometer stone of standard 3890.00 No.
design as per IRC:8-1980,fixing in c.c.M15,including
painting and printing etc.complete.
Spec. No.: IRC:8- 1980
RD-032 Providing R.C.C.(M-15) Ordinary kilometer stone of 2459.00 No.
standerd design as per IRC:8-1980,fixing in
c.c.M15,including painting and printing etc.complete.
Spec. No.: IRC:8- 1980
RD-033 Providing R.C.C.(M-15) 200 meter stone of standerd design 641.00 No.
as per IRC:8-1980,fixing in c.c.M15,including painting and
printing etc.complete.
Spec. No.: IRC:8- 1980
RD-034 Providing R.C.C.(M-15) Boundary stone of standerd design 400.00 No.
as per IRC:8-1980,fixing in c.c.M15,including painting and
printing etc.complete.
Spec. No.: IRC:8- 1980
RD-035 Providing and Fixing of Median Marker that are made of 635.00 No.
tough, high impact resistant, injection-molded,
thermoplastic body with an isosceles trapezoidal structure
of length, width and height not less than 15cm, 10cm and
10cm respectively and thickness not less than 1.8mm, the
body structure shall be rounded at its acute angle, all the
corners and edges. The plastic used for molding the Median
Marker shall have a minimum Notched Izod Impact
strength value of 600 J/m at room temperature, when
tested in accordance with ASTM D256 and shall retain at
least 70% of this value when subjected to accelerated
weathering for 1000hrs as per ASTM G155 or UL746C.
The logo of the manufacturer shall be embossed on either
side of the body in the injection molding process. The
/ 157 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
Median Marker shall have rectangular-shaped, fluorescent
yellow color retro-reflective sheeting of size not less than
8.5cm*8.5cm and with fully reflective micro prismatic cube
corners as its retro-reflective elements as per IRC 67 2010
and ASTM D4956 type XI specifications reflectivity values.
The retro-reflective sheeting shall be one or both sides of
the Median Marker and shall be edge protected with no
exposed edges which will prevent edge lifting, vandalism,
sheeting damage, etc. The Median Marker shall be fixed by a
combination of epoxy adhesive and grouting. Median
Marker
Spec. No.: As directed by Engineer-in-charge
RD-036 Supplying & Fixing of Molded Shank Raised Pavement 638.00 No.
Markers made of polycarbonate and ABS moulded body
and reflective panels with micro prismatic lens capable of
providing total internal reflection of the light entering the
lens face and shall support a load of 16000 kg tested in
accordance to ASTM D 4280 Type H and complying to
Specifications of Category A of MORTH Circular No
RW/NH/33023/10-97 – DO III Dt 11.06. 1997. The
height, width and length shall not exceed 50 mm, 100 mm
and 102 +/- 2 mm and with minimum reflective area of 13
Sqcm on each side and the slope to the base shall be 35 +/-
5 degree. The strength of detachment of the integrated
cylindrical shanks, (of diameter not less than 19 +/- 2 mm
and height not less than 30+/- 2 mm) from the body is to
be a minimum value of 500 Kgf. Fixing will be by drilling
holes on the road for the shanks to go inside, without nails
and using epoxy resin based adhesive as per manufacturer‟s
recommendation and complete as directed by the engineer.
Twin Shank RPM (Cat Eye)
Spec. No.: As directed by Engineer-in-charge
RD-037 Providing and painting center line,dashes,arrows etc.in two 8.40 R.Mt.
coats on new / old work with ready mix road marking paint
conforming to IS:164 on bituminous surface, including
cleaning the surface of all dirt,dust and other forein matter
demarcation at site and traffic control involved etc.
complete.(10 cm.in width)
Spec. No.: MORTH 803
a) New
b) Old 7.50 R.Mt.
/ 158 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-038 Providing and painting zebra painting of pedestraiin
crossing on the carrigeway with approved road making paint
in two coats etc. complete.
(over 10cm.wide patta)
Spec. No.: MORTH 803
a) New 66.00 Sqm
b) Old 132.00 Sqm
RD-039 Painting 5th K.M. stone with approved enamel paint in two 233.00 No.
coats and lettering including cleaning surface etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-040 Painting Ordinary K.M. stone with approved enamel 228.00 No.
paint in two coats and lettering including cleaning surface
etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-041 Painting Two Hundred Meter stone with approved 88.00 No.
enamel paint in two coats and lettering including cleaning
surface etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-042 Painting Boundry stone with approved enamel paint in two 44.00 No.
coats and lettering including cleaning surface etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-043 Providing oil painting to the plain surface of cement plaster,
wooden planks, steel sheets etc. complete in
two coats with superior grade oil paints.Rate for Painting
the letters as under
a) For lettering upto 5 cm.hegight 7.00 No.
b) For lettering 5 t0 7.5 cm.hegight 9.00 No.
c) For lettering 7.5 to 10 cm.hegight 12.00 No.
d) For lettering 10 to 12.50 cm.hegight 13.00 No.
RD-044 Providing and colour washing to road side in 2 coats in 2 18.00 Sqm
bands of white and one red band at center of 30cm height
each including preparing the surface, cost of material,
conveying etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
/ 159 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-045 Providing white washing the parapets of bridges, culverts 17.00 Sqm
and parapet in two coats of approved colour washing
etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-046 Providing dry Trap rubble stone mansonry with headers 560.00 Sqm
etc.complete
Spec. No.: Rd. 61 Page No. 141.
RD-047 Providing rain cuts over side shoulder and making 5.00 R.Mt.
arrangement for surface drainage.
Spec. No.: As directed by Engineer-in-Charge.
RD-048 Reflexing the distribed guard stone in position and in line 12.00 R.Mt.
with necessary excavation, back filling, ramming
etc.complete.
Spec. No.: As directed by Engineer-in-Charge.
RD-0549 Providing and laying shoulder drain of trap rubble of 110.00 R.Mt.
0.45 x 0.45 metre section at 450 angle including hand
packing, filling voiids with sand and shingle of approved
quality and ramming etc. complete as directed.
Spec. No.: As directed by Engineer-in-Charge.
RD-050 Breaking and removing the existing cement concrete 480.00 Cu.Mt.
pavement to full width, depth including lean concrete,
cutting dowel bars, breaking the removed cement concrete
slab pieces into 50 to 80 mm size, spreading the layer,
watering and consolidation with power roller etc. complete.
(IInd layer not to be more than 75mm)
Spec. No.: As directed by Engineer-in-Charge.
RD-051 Carrying out roughness index/ road unevenness test with
car mounted/ Jeep towed ARUR machine (Automatic Road
Unevenness Reconder ) caliberated from C.R.R.I. New
Delhi (Central Road Research institute) or any other
equivalent authority including taking observations, feeding
data and giving computerised test results including hire
charges of all machinery and labour etc. complete.
Spec. No.: As directed by Engineer in charge.
a) Road Surface Single Lane.(3.70 to 5.50 m) 600.00 Km.
b) Road Surface 1.5 Lane to Two Lane.(5.50to7.00 m) 1200.00 Km.
/ 160 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
c) Each Additional Lane. 600.00 Km.
d) Dead Journey Charges. 15.00 Km.
RD-052 Providing and laying CE Marked Woven Polypropylene
Geotextile of Techfab India indigenously manufactured
from black UV stabilized polypropylene tape yarn on the
prepared subgrade for Reinforcement cum separation cum
drainage & filtration application with necessary overlaps as
per drawing etc. complete.
(Specification: IRC:SP:59-2002 & MORTH Section-700)
a) TFI-5300 Type-I 138.00 Sqm
b) TFI-5200 Type-II 128.00 Sqm
c) TFI-5100 Type-III 116.00 Sqm
RD-053 Providing and laying CE Marked Needle Punched and
Mechanically Bonded Non-Woven Geotextile (TechGeo) of
Techfab India indigenously manufactured from high quality
polypropylene staple fibres (continuous filament will not be
accepted) on the prepared subgrade for separation,
drainage & filtration application with necessary overlaps as
per drawing etc. complete
(Specification:IRC:SP:59-2002&MORTH Section-700)
a) TFI TECHGEO PR-15 100.00 Sqm
b) TFI TECHGEO PR-20 128.00 Sqm
c) TFI TECHGEO PR-30 126.00 Sqm
RD-054 Providing and Laying CE marked Knitted and PVC
coated Polyester Biaxial Geogrid (Techgrid) of Techfab
India for Basal Reinforcement indigenously
manufactured from selected high tenacity polyester yarn
with high molecular weight (> 25000 g/mol), and low
carboxyl end group (<30mmol/kg) (extruded PP geogrids
& Polyester strips & Geostrips, Steel Strips not allowed &
not accepted). Requirement of geogrid strength in both
direction and granular fill. (Coating of Geogrid/ reinforcing
geosynthetic material with LDPE, Latex, Bitumen and any
other coating will not be allowed and will not be accepted).
For reinforcement application to subgrade, unbound sub
/ 161 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
base / base courses & soil stabilization, etc. complete.
(Specification: IRC:SP:59-2002 & MORTH Section-700)
a) TFI TechGrid GeoGrid TGB-40 177.00 Sqm
b) TFI TechGrid GeoGrid TGB-60 219.00 Sqm
RD-055 Providing and laying TFI TECHGRID GEOGRID TGU-
40 CE Marked knitted and PVC coated Polyester Uniaxial
Geogrid (Techgrid) of Techfab India indigenously
manufactured from selected high tenacity polyester yarn
with high molecular weight (> 25000 g/mol), and low
carboxyl end group (<30 mm mol /Kg) (extruded PP
geogrid & Polyester strip & Geostrip, steel strips not
allowed & not accepted) with granular fill as per design
prepared by technical provider of reinforced earth wall and
slope. The reinforced earth wall and slope should have
100% coverage of 5m width knitted and PVC coated
Polyester geogrid. (Coating of Geogrid/ Reinforcing
geosynthetic material with LDPE, Latex, Bitumen and any
other coating will not be allowed and will not be accepted)
for reinforced soil wall and reinforced slope application,
etc. complete.
(Specification: MORTH Section-700)
a) TFI TechGrid GeoGrid TGU-40 122.00 Sqm
b) TFI TechGrid GeoGrid TGU-60 138.00 Sqm
RD-056 Providing and laying CE Marked Reinforced Non- Woven
Composite of Techfab India indigenously manufactured
needle punched polypropylene (continuous filament will not
be accepted), Reinforced with high tenacity Polyester Yarn
on the prepared sub grade for Reinforcement cum
separation cum drainage & filtration application with
necessary overlaps as per drawing etc. complete.
(Specification: IRC:SP:59-2002 & MORTH Section-700)
a) TFI TGC-60 185.00 Sqm
b) TFI TGC-90 230.00 Sqm
RD-057 Providing and inserting CE Marked Prefabricated Vertical
Drain / Band Drain (TechDrain) of Techfab India
indigenously manufactured with Polypropylene Core and
wrapped with Non-Woven Geotextile in the very soft clay
/ 162 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
to a design depth for quick consolidation etc. complete.
(Specification: MORTH Section-700).
a) TFI TechDrain TD-3520 U 100mm x 4mm 61.00 Rmt.
b) TFI TechDrain TD-5020 U 100mm x 5mm 77.00 Rmt.
RD-058 Providing & fixing CE Marked TechFab Metal Gabions
indigenously manufactured as per required section including
boxes made of mechanically woven hexagonal shaped wire
mesh of type, (10 x 12)cm, edges mechanically selvedged
made of heavily (Zinc + PVC) coated G.I. wires as per
BS:443, mesh wire 2.70/3.70 mm Ø (ID/OD), edge wire
3.40/4.40 mm Ø (ID/OD) of Techfab India type and filled
with 20 to 50 Kg weight trap stones including conveying
with all leads and lifts and placing at required places in
required line, level, slope, section as directed, etc. and tied
by 3% lacing wire 2.20/3.20 mm Ø (ID/OD) as directed
by Engineer-in- charge. For retaining walls, toe walls,
etc. for slope protection & erosion control application of
river bank & sea-shore etc. complete
(Specification: MORTH section-700. (Excluding Rubble)
a) Size 1M x 1M x 1M 1610.00 No.
b) Size 1M x 1M x 2M 2871.00 No.
c) Size 1M x 1M x 3M 4166.00 No.
RD-059 Supplying soft murum for blindage (Plasticity index < 6) at 348.00 Cum.
the road side including all lead and lifts and conveying to
site and stacking etc. complete .The rate is inclusive of all
types of taxes
Spec. No.: Rd. 24 Page No. 376
Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
RD-060 Supplying blindage of stone dust at the road side including 546.00 Cum.
all lead and lifts and conveying to site and stacking etc.
complete. The rate is inclusive of all types of taxes. - As
directed by Engineer-in-charge.
RD-061 Supplying hard murum/kankar at the road side, including 91.00 Cu.Mt.
and stacking etc. complete.
Spec. No.: Rd. 23 Page No. 375/2012
/ 163 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-062 Supplying gravel at the road side, including conveying and 160.00 Cu.Mt.
stacking etc. complete.
Spec. No.: Rd. 26 Page No. 377
RD-063 Spreading of oversize and size metal (40 mm / 50 mm / 60 48.00 Cum.
mm/ 80 mm) on the prepared surface by manually to the
required thickness, line, level, grade, camber, sectioning etc.
complete.
Spec. No.: Rd. 29 Page No. 379
RD-064 Spreading gravel / hard murum / soft murum and stone 29.00 Cum.
dust over the rubble soling, oversize and size metal layer /
blindage on W.B.M. surface etc. complete.
Spec. No.: Rd.28 Page No. 379
RD-065 Spreading gravel / hard murum / kankar on the road 27.00 Cu.Mt.
formation / side width.
Spec. No.: Rd.28 Page No. 379
RD-066 Compacting sub grade / gravel / oversize metal (200mm 14.00 Sq.m
loose) layer 2 to 7m wide with static roller including
necessary, labour, materials and artificial watering etc.
complete.
Spec. No.: Rd. 30 Page No. 380
RD-067 Compacting the subgrade, soling, gravel, sand, softmurrum, 20.00 Sqm.
oversize metal layer with vibratory power roller including all
necessary, material, labour, watering etc. complete.
Spec. No.: Rd. 30 Page No. 380
RD-068 Compacting the size metal (150 mm loose) layer upto 16.00 Sq.m
2.00m width with static roller, including necessary labour,
meterials and artificial watering etc.complete.
Spec. No.: RD 30 Page 380
RD-069 Compacting the size metal layers with vibratory power roller 18.00 Sqm.
including necessary labour, material and regular watering
after dry rolling on metal surface and after spreading
blindage on each layer, etc.
Spec. No.: RD 30 Page 380
RD-070 Compacting the hard murum / kankar 2.00m to 7.00 width
(200mm loose) with static roller including artificial watering
etc.complete.
a) static roller 6.00 Sq.m
b) Vibratory roller 8.00 Sq.m
/ 164 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RD-071 Compacting the hard murum side width, layer wise on each 8.00 Sq.m
side with Vibratory Roller.roller including artificial watering
etc. complete.
As directed by Engineer-in-charge.
RD-072 Providing and laying in situ Dry lean cement concrete sub- 4506.00 Cu.Mt.
base of trap metal of specified gradation using, mixing as
per approved design mix, compacting with vibratory roller
of minimum 80-100KN static weight to give desired
compacted density,providing construction joints,and curing
with liquid curing compound and sprinkling water, and
covering with moist hessain or ponding of water for 7days
including all materials,labour,machinery with all leads and
lifts,bailing out water manually,and formwork etc complete.
Spec. No.: MORT&H-601
RD-073 Providing & laying granular sub-base (GSB) as per clause
401 of M.O.R.T.&H (2001) specifications of specified
grading (Table 400-1 or 400-2) in specified thickness in
layers. The item to include premixing the materials in plant,
transportation to site, spreading in uniform layers with
motor grader on a prepared subgrade, compacting with
vibratory rollers till 98% of the maximum dry density (IS
2720 part-8) is achieved etc. Complete. The rate includes for
tests on completion of each GSB layer. The strength of
each GSB layer shall be evaluated by conducting CBR (IS
2720 Part 16 & 31) or Plate load test using 750mm dia.
Plate, (IS 9214) for obtaining equivalent CBR value @ one
test per 3000 m2 compacted surface area as per the
Grading. The item includes for all necessary material,
labour, diversions, taxes, royalty, cess etc complete.
a) For Grading-I of close-graded GSB material with 1130.00 Cum.
minimum CBR value of 30% (As per IS 9214- 1979)
to be obtained on top of the compacted layer. (Upper
sub-base)
b) For Grading-II of close-graded GSB material with 1083.00 Cum.
minimum CBR value of 25% (As per IS 9214-1979) to
be obtained on top of the compacted layer.
(Intermediate sub-base)
c) For Grading-III of close-graded GSB material with 1037.00 Cum.
/ 165 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
minimum CBR value of 20% to be obtained on top of
the compacted layer. (Lower sub-base).
d) For Grading-I of coarse-graded GSB material with 1204.00 Cum.
minimum CBR value of 30% (As per IS 9214-1979) to
be obtained on top of the compacted layer. (Upper
sub-base)
e) For Grading-II of coarse-graded GSB material with 1185.00 Cum.
minimum CBR value of 25% (As per IS 9214-1979) to
be obtained on top of the compacted layer
(Intermediate sub-base)
f) For Grading-III of coarse-graded GSB material with 1146.00 Cum.
minimum CBR value of 20% to be obtained on top of
the compacted layer. (Lower sub-base).
RD-074 Providing & laying granular base of Wet mix macadam 1617.00 Cum.
(WMM) as per clause 406 of M.O.R.T.&H (2001)
specifications of specified grading (Table 400-11) in
specified thickness in layers. The item to include premixing
the materials in plant, transportation to site, spreading in
uniform layers with paver on a prepared sub-base,
compacting with vibratory rollers till 98% of the maximum
dry density (IS 2720 Part-8) is achieved etc complete. The
rate includes for tests on completion of each WMM layer.
The strength of each WMM layer shall be evaluated by
Plate load test with 750 mm dia plate. (IS 9214) for
obtaining equivalent CBR value @ one test per 3000 m2
compacted surface area as per the Grading. The item
includes for all necessary material, labour, diversions, taxes,
royalty, cess etc complete.
RD-075 Providing and laying RCC NP2 class pipes ____ mm dia of
specified diameter in proper line, level, and slope, for
making connection of water entrance chamber to the
S.W.drain. The item to include all labour, supply of all
materials and it‟s conveyance to site, fixing the spun pipes
in collars, jointing in CM(1:2), curing etc. complete.”
a) 100mm dia 349.00 Rmt.
b) 150mm dia 419.00 Rmt.
c) 225mm dia 565.00 Rmt.
/ 166 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Works…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
d) 300mm dia 803.00 Rmt.
e) 350mm dia 958.00 Rmt.
RD-076 Dressing of side shoulders including excavation, cutting 5.00 Sqm.
shrubs and bushes, spreading the excavated stuff and
section into the required line, level and slope etc. complete
Spec. No.: As directed by Engineer-in-charge
RD-077 Disposal of surplus excavated materials upto specified lead
and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-charge etc. complete.
a) Upto 0.5 Km. 115.00 Cum.
b) Lead beyond 0.5 km. upto 1.0 Km. 125.00 Cum.
c) Lead beyond 1.0 km. upto 1.5 Km. 136.00 Cum.
d) Lead beyond 1.5 km. upto 2.0 Km. 146.00 Cum.
e) Lead beyond 2.0 km. upto 2.5 Km. 156.00 Cum.
f) Lead beyond 2.5 km. upto 3.0 Km. 166.00 Cum.
/ 167 /
CIDCO SCHEDULE OF RATES : 2015-2016
ASPHALTING
Asphalting…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
AS-001 Providing and applying bituminous tack coat @--------- by
manual/ mechanical sprayer including supplying all
materials, preparing the existing surface, heating bitumen
and applying tack coat evenly on the surface etc. complete
(using 60/70 grade bitumen) the rate is inclusive of all
taxes.
Spec. No.: MOST Clause C 503 / 2001
a) @ 50kg/ 100 m2 over B.T. surface 37.00 Sqm.
b) @ 100kg/100 m2 over WBM surface 52.00 Sqm.
AS-002 Providing and applying low viscosity liquid bituminous
material such as bitumen emulsion or cut back or road tar
complying to relevant IRC/IS code of approved type and
grade by a self propelled or towed bitumen pressure sprayer
as per clause No. 502 of Specifications for road and bridge
works (M.O.R.T.& H.,2001). The item includes for
preparation of the base, application of the prime coat,
curing, relevant tests for quality control as enumerated in
table 900-4, diversion of traffic, etc. complete. The rate
shall include for all labour, materials, machinery,
transportation, taxes etc. complete”
a) For low porosity surfaces such as WMM/WBM at an 45.00 Sqm.
application rate of 0.6 to 0.9 kg/sqm.with kinematic
viscosity of primer at 60 degree ranges between 30-60
centistokes
b) For Medium porosity surfaces such as cement 59.00 Sqm.
stabilised soil base at an application rate of 0.9 to 1.2
kg/sqm.with kinematic viscocity of primer at 60degree
ranges between 70-140 centistokes.
c) For high porosity surfaces such as gravel base at an 72.00 Sqm.
application rate of 1.2 to 1.5 kg/m2 with kinematic
viscosity of primer at 60degree ranges between 250-
500 centistokes.
AS-003 Providing and applying low viscosity liquid bituminous
material such as bitumen emulsion complying to IS 8887 of
approved type and grade by a self propelled or towed
bitumen pressure sprayer as per clause No. 503 of
/ 168 /
CIDCO SCHEDULE OF RATES : 2015-2016
Asphalting…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
Specifications for road and bridge works (M.O.R.T.& H.,
2001). The item includes for preparation of the base,
application of the tack coat, curing, relevant tests for quality
control as enumerated in table 900-4, diversion of traffic,
etc. complete. The rate shall include for all labour,
materials, machinery, transportation, taxes etc. complete.
a) For Normal bituminous surface at an application rate 20.00 Sqm.
of 0.2 to 0.25 kg/sqm.
b) For Granular surfaces treated with primer at an 23.00 Sqm.
application rate of 0.25 to 0.30 kg/m2.
c) For Non-bituminous surface – Granular base (not 27.00 Sqm.
primed) at an application rate of 0.35 to 0.40 kg/m2.
AS-004 Providing and constructing Bituminous Bound Macadam
(BBM) surface 75 mm thickness including supplying all
materials including metal, bitumen etc. spreading 40 mm
hand broken trap metal 9 cum per 100 m2 and 20 mm trap
metal at the rate of 1.5 cum/100 sqm., heating and
spreading bitumen (excluding tack coat) at 250 kg./100 m2,
spreading 12 mm size key aggregate at the rate of 1.8
cum/100 sqm and compaction with vibratory roller
complete. Grade of bitumen shall be 60/70.
On WBM/WMM/Bituminous surface including existing 239.00 Sqm
surface. Excluding tack coat
Note: Item also includes cleaning the road surface with
wire brush/brooms and make it free from dust and water
before applying/ spreading tack coat. The tack coat shall be
paid separately.
AS-005 Providing and laying hot mix hot laid Lean Bituminous 4621.00 Cum.
Macadam (LBM) with minimum 2.5% bitumen by weight
of total mix including diversion of traffic, supply of all
materials, heating bitumen and chips in drum mix plant,
cleaning the road surface, laying bituminous macadam by
sensor paver finisher including compacting with vibratory
roller, transportation and cost of all materials, bitumen
from refinery etc. complete. Grade of bitumen shall be
60/70. The rate is inclusive of all types of taxes. (Excluding
tack coat).
/ 169 /
CIDCO SCHEDULE OF RATES : 2015-2016
Asphalting…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
AS-006 Providing and laying hot mix hot laid Bituminous Macadam 5477.00 Cum.
(BM) as per clause 504 of MORTH (2001) specification for
road & bridges with 3.3 to 3.5% bitumen by weight of total
mix including diversion of traffic, supply of all materials,
heating bitumen and chips in hot mix plant, cleaning the
road surface, laying BM by sensor paver finisher including
compacting with vibratory roller etc. complete. The grade
of bitumen shall be 60/70 grade. The rate is inclusive of all
types of taxes.(Excluding tack coat).
AS-007 Providing and laying hot mix hot laid Dense Graded 7344.00 Cum.
Bituminous Macadam (DBM) of required thickness with
minimum 4.5% bitumen by weight of total mix/ depending
on job mix formula & as per clause 507 of MORTH (2001)
specification for road & bridges including diversion of
traffic, supply of all materials, heating bitumen and chips,
mixing bitumen and chips with necessary filler material in
batch type or continuous type or drum mix type hot mix
plant, laying dense bituminous macadam by paver finisher
including compaction with vibratory roller etc. complete
(excluding tack coat). The grade of bitumen shall be 60/70.
The rate is inclusive of all types of taxes.
AS-008 Providing and laying 20 mm thick hot mix hot laid pre-mix 155.00 Sqm.
Seal Coat (SC) composed of 11.2 mm to .09 mm (type a) or
13.2 mm to .09 mm (type b) aggregate using 60/70 grade
bitumen @ 22kg/10 sqm as per MORT&H-512 including
supplying all materials, heating bitumen, mixing bitumen
and chips in hot mix plant, laying the seal coat by sensor
paver finisher including compaction with vibratory roller
etc. complete. The grade of bitumen shall be 60/70. The
rate is inclusive of all types of taxes.(Excluding tack coat)
AS-009 Providing and laying hot mix hot laid Asphaltic 8539.00 Cum.
Concrete/bituminous concrete (AC/BC) with bitumen 5%
to 7% by weight of total mix as per job mix formula as per
clause 509 of MORTH (2001) specification for road &
bridges including supplying all materials, heating bitumen
and chips with necessary filler material mixing bitumen and
chips in hot mix plant laying asphaltic concrete with sensor
paver finisher including compaction with vibratory roller
etc. complete (excluding tack coat). The grade of bitumen
/ 170 /
CIDCO SCHEDULE OF RATES : 2015-2016
Asphalting…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
shall be 60/70. The rate is inclusive of all types of taxes.
The job mix formula shall be conducted as per frequency
specified by MORTH.
Spec. No. MORT&H Clause 509
AS-010 Providing and laying Mastic Asphalt with bitumen of 10/20
grade as per clause No. 515 of Specifications for road and
bridge works (M.O.R.T.& H., 2001) of specified thickness.
The item includes all labour, providing materials as per mix
design and job mix formula. Preparation of the base,
preparation of mastic asphalt, spreading, jointing, surface
finishing, quality control as specified under various sub-
clauses of main clause No.515. (Excluding prime coat and
tack coat)
a) For 12mm compacted thickness with bitumen content 355.00 Sqm.
@ 14%-17% by weight of total mix.
b) For 20mm compacted thickness with bitumen content 594.00 Sqm.
@ 14%-17% by weight of total mix.
c) For 25mm compacted thickness with bitumen content @ 773.00 Sqm.
14%-17% by weight of total mix.
AS-011 Providing and laying micro surfacing layer as wearing course 248.00 Sqm.
in single layer using crushed aggregates of specific size as
per Table - 3 of IRC:81-2008 using Modified Cationic
Bitumen Emulsion as per Table - 8 of IRC:81-2008 using
specialised Microsurfacing Paver and other materials,
machinery etc. complete.
/ 171 /
CIDCO SCHEDULE OF RATES : 2015-2016
ROAD FURNITURE
Road Furniture…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RF-001 Providing PCC precast factory made kerb stone of 741.00 Rmt.
500x400x150 mm size in M-25 grade of concrete using
design mix with minimum cement content as per IS 456 for
moderate exposure condition including fixing in PCC 1:2:4,
250 mm thick, filling the joint with CM 1:3, pointing in CM
(1:3) on exposed face etc. complete including painting in
two coats of oil paint to exposed surfaces, one coat of
primer and excavation and disposal of excavated material,
making good the road etc. complete. The rate is inclusive of
all types of taxes.
RF-001A Providing PCC precast factory made kerb stone of 711.00 Rmt.
500x400x150 mm size for water entry without painting in
M-25 grade of concrete using design mix with minimum
cement content as per IS 456 for moderate exposure
condition including fixing in PCC, 250 mm thick, filling the
joint with CM (1:3), pointing in CM (1:3) on exposed face
etc. complete and excavation and disposal of excavated
material, making good the road etc. complete. The rate is
inclusive of all types of taxes.
RF-001B Providing PCC precast factory made set stone of 833.00 Rmt.
500x150x400 mm size in M-25 grade of concrete using
design mix with minimum cement content as per IS 456
including fixing in PCC, 250 mm thick, filling the joint with
CM (1:3), etc. complete including excavation and disposal
of excavated material, making good the road etc. complete.
The rate is inclusive of all types of taxes.
RF-002 Providing and fixing PCC pre-cast factory made water table 341.00 Rmt.
of 500 x 300 x 100 mm size in M-25 grade of concrete using
design mix with minimum cement content as per IS 456
including excavation, fixing in PCC M-10, bed 75 mm thick
filling the joint in CM (1:3), curing, including excavation as
required, disposal of excavated material, making good the
road etc. complete. The rate is inclusive of all types of taxes.
RF-003 Providing and fixing heavy duty inter locking concrete Gray 925.00 Sq.M.
/ Colour antiskid paving blocks of 60 mm thickness of
having a strength of 300 kg/Sq.cm. of approved quality and
shape on a bed of crushed sand of 25 to 40 mm thick
/ 172 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Furniture…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
including compacting, cleaning etc. complete. (prior
approval of SE is essential)
Spec. No.: A directed by Engineer in charge
RF-003A Providing and fixing heavy duty inter locking concrete Gray 1059.00 Sq.M.
/ Colour antiskid paving blocks of 80 mm thickness of
having a strength of 400 kg/Sq.cm. of approved quality and
shape on a bed of crushed sand of 25 to 40 mm thick
including compacting cleaning etc. complete. (prior approval
of SE is essential)
Spec. No.: A directed by Engineer in charge
RF-004 Providing and fixing precast RCC beams of size 150x150 296.00 Rmt.
mm over SW Drain in M-25 grade of concrete using design
mix with minimum cement content as per IS 456 as per
detailed design and drawings or as directed including steel
centering, compaction, curing and finishing uneven and
honey combed surface with cement mortar 1:3 of sufficient
minimum thickness to give a smooth and even surface
including providing & fixing steel reinforcement @ 60
Kg/M3. The rate is inclusive of all types of taxes.
RF-005 Providing and fixing precast RCC slab of 100 mm thickness 1814.00 Sqm.
in M-25 grade of concrete using design mix with minimum
cement content as per IS 456 as per detailed design and
drawings or as directed with fixing of 3 mm thick M.S. plate
around the slab for inspection opening for S.W.drain
including compaction, curing and finishing uneven and
honey combed surface with cement mortar 1:3 of sufficient
minimum thickness to give a smooth and even surface
including reinforcement. The rate is inclusive of all types of
taxes.
RF-006 Providing and fixing 300 mm dia R.C.C. pipe of 0.7 m 777.00 No.
length filled with M-15 for boundary stones of standard size
and shape as per drawing including fixing in block of
standard size of M-15 white washing including necessary
survey, excavation, etc. complete. The rate is inclusive of all
types of taxes.
RF-007 Providing & fixing parabolic shape RCC precast-factory 1764.00 Rmt.
made M25 Grade kerb stone using design mix with
minimum cement content as per IS 456 of size
/ 173 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Furniture…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
500/200/850 mm as per detailed design and drawing
including excavation, fixing in PCC of M-15grade bed 100
mm thick including side concreting, filling joints in cement
mortar (1:3) disposal of excavated material, including
painting in two coats of oil paints and one coat of primer to
exposed faces, transportation to site, labour, providing &
fixing steel reinforcement @ 60 Kg/M3, etc. complete. The
rate inclusive of all type of taxes.
RF-008 Providing & applying hot applied thermoplastic pavement 1100.00 Sqm.
white coloured marking paint with resin and 10% approved
glass beads, etc., complete with three years guarantee for
white lane marking spacing as per drawing for arrows for
pedestrian crossings for abstraction approach marking, for
directional markings at junction (white colour arrows as per
drawing or as directed by Engineer-in-charge, etc. compete.
RF-009 Providing and applying hot applied thermo-plastic pavement 1155.00 Sqm.
yellow coloured marking paint with resin and 10% approved
glass beads, etc, as specified in the drawing and 150 mm
from the edge of road and central verge, etc, complete.
Spec. No.: MORTH CI.803 Page 388/2012
RF-010 Providing and fixing RCC precast factory made RCC 836.00 No.
channel of M25 grade of cement concrete using design mix
with minimum cement content as per IS 456 at super
elevation in the median area of size 1570 x 400 x 160 mm
thick with minimum cement content of 360 Kg/M3
including steel reinforcement @ 80 Kg/M3 as per drawing,
transportation to site, etc complete or as directed by
Engineer-in-charge.
RF-011 Providing and making water entrant chamber of (450 x 450 2938.00 No.
mm x 450 mm) size to drain out the water from channel
provided at super elevation including necessary excavation,
PCC for foundation in CC 1:3:6, brick work cement mortar
(1:3), external and internal plastering in CM (1:3), coping in
CC M-15, with RCC heavy duty grating as per design in
drawing etc. complete.
RF-012 Providing & laying in situ cement concrete of M-10 grade of 5170.00 Cum.
trap metal for foundation and bedding, including bailing out
water manually, formwork, compacting and curing, etc.
complete.
Spec. No.: Bd.E.2 Page No. 288 and B.7 Page No.70
/ 174 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Furniture…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RF-013 Providing and casting in situ cement concrete M20 of trap 5471.00 Cum.
metal for bed block foundation and such other items,
including bailing out water manually, form work,
compacting, roughening the exposed faces if special finish is
to be provided and curing etc. complete.
Spec. No.: Bd.E.4 Page No. 72 and B-7, Page No.38
RF-014 Providing & fixing M-15 grade RCC guard stone of 425.00 No.
20x20x75 cm including fixing in ground and white washing
etc. complete.
Spec. No.: IRC:8-1980
RF-015 Providing and fixing everlast make frame and cover
including rain water drain hole and inclusive of
transportation, embossing of CIDCO numerals / letters
with year of manufacturing, all fixtures and fittings. The
work should be completed as per the directives of Engineer-
in-charge etc. complete.
A) Rectangular Manhole cover with frame
1) Light (2.5 T)
i) 0.450 x 0.900 m. 13126.40 No.
ii) 0.600 x 0.900 m. 14657.20 No.
iii) 1.170 x 1.170 m. 20841.35 No.
2) Heavy (20 T)
i) 0.450 x 0.900 m. 19674.80 No.
ii) 0.600 x 0.900 m. 22735.50 No.
iii) 1.0 x 1.0 m. 75595.90 No.
iv) 1.170 x 1.170 m. 81601.00 No.
B) Circular Manhole frame and cover-Heavy(20 T)
1) Both Cover & Frame
i) Dia. 0.530 m. 19147.90 No.
ii) Dia. 0.690 m. 22241.35 No.
2) Only Cover
i) Dia. 0.530 m. 9073.25 No.
ii) Dia. 0.690 m. 10076.75 No.
C) Grating (Jali) with frame-Medium(10 T)
/ 175 /
CIDCO SCHEDULE OF RATES : 2015-2016
Road Furniture…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
i) 0.450 x 0.450 m. 11370.90 No.
ii) 0.500 x 0.600 m. 15008.40 No.
iii) 0.600 x 1.170 m. 25670.80 No.
/ 176 /
CIDCO SCHEDULE OF RATES : 2015-2016
SIGNAGES
Signages…
ITEM
DESCRIPTION 20015-16 UNIT
CODE
SN-001 Providing and Fixing of Retro Reflectorised 900 mm 6420.00 No.
Octagon Stop Sign boards made out of retro reflective
sheeting of High Intensity prismatic grade conforming to
IRC-67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2 mm thick Al / 4mm thick ACP
sheet supported with Back support frame of 25x25x3mm
mild steel angle as approved , supported on a mild steel
angle iron post 75 mm X 75 mm X 6 mm -2.7 mtr height,
firmly fixed to the ground by means of properly designed
foundation with M20 grade cement concrete 45 cm X 45 cm
X 60 cm , 60 cm below ground level as per approved
drawing. 7 years Warranty for Retro Reflective Sheeting
from the original sheeting manufacturer & a certified copy
of three years outdoor exposure report from an independent
test lab for the product offered shall be submitted by the
contractor Stop boards of 90 cm Octagon.
Spec. No.: IRC-67 of 2012
SN-002 Providing and Fixing of Retro Reflectorised 300 X 900 mm 3512.00 No.
Hazard Marker boards made out of retro reflective sheeting
of High Intensity prismatic grade conforming to IRC-67:
2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2 mm thick Al / 4mm thick ACP
sheet supported with Back support frame of 25x25x3mm
mild steel angle as approved , supported on a mild steel
angle iron post 75 mm X 75 mm X 6 mm - 2.7 mtr height,
firmly fixed to the ground by means of properly designed
foundation with M20 grade cement concrete 45 cm X 45 cm
X 60 cm , 60 cm below ground level as per approved
drawing. 7 years Warranty for Retro Reflective Sheeting
from the original sheeting manufacturer & a certified copy
of three years outdoor exposure report from an independent
test lab for the product offered shall be submitted by the
contractor Hazard Marker boards of 30 x 90 cm Rectangle.
Spec. No.: IRC-67 of 2012
SN-003 Providing and Fixing of Retro Reflectorised 600 X 800 mm 5114.00 No.
Facility sign boards made out of retro reflective sheeting of
High Intensity prismatic grade conforming to IRC-67: 2012
/ 177 /
CIDCO SCHEDULE OF RATES : 2015-2016
Signages…
ITEM
DESCRIPTION 20015-16 UNIT
CODE
& Type IV standards of ASTM D4956-09 specifications,
fixed over 2 mm thick Al / 4mm thick ACP sheet supported
with Back support frame of 25x25x3mm mild steel angle as
approved , supported on a mild steel angle iron post 75 mm
X 75 mm X 6 mm - 3.5 mtr height, firmly fixed to the
ground by means of properly designed foundation with M20
grade cement concrete 45 cm X 45 cm X 60 cm, 60 cm
below ground level as per approved drawing. 7 years
Warranty for Retro Reflective Sheeting from the original
sheeting manufacturer & a certified copy of three years
outdoor exposure report from an independent test lab for
the product offered shall be submitted by the contractor
Facility Sign boards of 60 x 80 cm Rectangle. Size 60 x 80
cms. Rectangle
Spec. No.: IRC - 67 of 2012
SN-004 Providing and Fixing of Retro Reflectorised 600mm 3931.00 No.
Cautionary sign boards made out of retro reflective
sheeting of High Intensity prismatic grade conforming to
IRC-67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2 mm thick Al / 4mm thick ACP
sheet supported with Back support frame of 25x25x3mm
mild steel angle as approved , supported on a mild steel
angle iron post 75 mm X 75 mm X 6 mm - 3.5 mtr height,
firmly fixed to the ground by means of properly designed
foundation with M20 grade cement concrete 45 cm X 45 cm
X 60 cm , 60 cm below ground level as per approved
drawing. 7 years Warranty for Retro Reflective Sheeting
from the original sheeting manufacturer & a certified copy
of three years outdoor exposure report from an
independent test lab for the product offered shall be
submitted by the contractor Mandatory boards of 60 cm
Diameter.
Spec. No.: IRC-67 of 2012
SN-005 Providing and Fixing of Retro Reflectorised 900mm 4460.00 No.
Cautionary sign boards made out of retro reflective
sheeting of High Intensity prismatic grade conforming to
IRC-67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2 mm thick Al / 4mm thick
ACP sheet supported with Back support frame of
/ 178 /
CIDCO SCHEDULE OF RATES : 2015-2016
Signages…
ITEM
DESCRIPTION 20015-16 UNIT
CODE
25x25x3mm mild steel angle as approved , supported on a
mild steel angle iron post 75 mm X 75 mm X 6 mm - 3.5
mtr height, firmly fixed to the ground by means of properly
designed foundation with M20 grade cement concrete 45
cm X 45 cm X 60 cm , 60 cm below ground level as per
approved drawing. 7 years Warranty for Retro Reflective
Sheeting from the original sheeting manufacturer & a
certified copy of three years outdoor exposure report from
an independent test lab for the product offered shall be
submitted by the contractor Regulatory sign boards of 90
cm Diameter.
Spec. No.: IRC-67 of 2012
SN-006 Providing and Fixing of Retro Reflectorised direction & 9139.00 Sqm
place identification sign boards made out of retro reflective
sheeting of High Intensity prismatic grade conforming to
IRC- 67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2mm thick Al / 4 mm thick ACP
sheet supported with Back support frame of 35x35x5mm
mild steel angle with areas not exceeding 0.9 sqm.
Supported in mild steel angle iron post 75x75x6mm - 3.5
mtr height ,firmly fixed to the grounf by means of properly
designed foundation of M-20 grade cement concrete 45 cm
x 45 cm x 60 cm, 60 cm below ground level complete (as
per MoRT&H specification No.801) (for area Less than 0.9
sqm). 7 years Warranty for Retro Reflective Sheeting from
the original sheeting manufacturer & a certified copy of
three years outdoor exposure report from an independent
test lab for the product offered shall be submitted by the
contractor. Direction Sign boards below 0.9 Sq.Mtr
Spec. No.: IRC-67 of 2012
SN-007 Providing and Fixing of Retro Reflectorised direction & 10980.00 Sqm
place identification sign boards made out of retro reflective
sheeting of High Intensity prismatic grade conforming to
IRC-67: 2012 & Type IV standards of ASTM D4956-09
specifications, fixed over 2mm thick Al /4 mm thick ACP
sheet supported with Back support frame of 35x35x5mm
mild steel angle with areas not exceeding 0.9 sqm.
Supported in mild steel angle iron post 75x75x6mm - 3.5
mtr height & with MS angle of 50x50x5mm bracing,firmly
/ 179 /
CIDCO SCHEDULE OF RATES : 2015-2016
Signages…
ITEM
DESCRIPTION 20015-16 UNIT
CODE
fixed to the grounf by means of properly designed
foundation of M20 grade cement concrete 45 cm x 45 cm x
60 cm , 60 cm below ground level complete (as per
MoRT&H specification No.801) (for area more than 0.9
sqm). 7 years Warranty for Retro Reflective Sheeting from
the original sheeting manufacturer & a certified copy of
three years outdoor exposure report from an independent
test lab for the product offered shall be submitted by the
contractor. Direction Sign boards
Spec. No.: IRC-67 of 2012
SN-008 Providing & Fixing informatory sign boards in square or 4356.00 Sq.Mt.
rectragular shape of any size made out 16 quage (1.6 mm)
thick mild steel sheet painted with one coat of zinc
chromate stoving primer and two coats green back ground
white boarder/messages,symbols etc. and back side in grey
stove enamel paint including M.S.angle frame of 35 mm x
35 mm x 3 mm and two M.S.angle iron post of size 50 mm
x 50 mm x 5 mm. 3.65 m long properly cross braced with
angle iron of size 50 mm x 50 mm x 5 mm duly painted
with alternate black and white bands of 25 cm width
including G.I.fixtures etc. and fixing the board in 1:4:8
concrete block of size 60 cm x 60 cm x 75 cm including
transportation etc.complete.
Spec. No.: As directed by Engineer-in-charge
SN-009 Providing Vertical Delineator having wide angle cube 1350.00 No.
corner micro prismatic non metallic reflective sheeting
confirming to Type XI of ASTM D4956 -09 with White
Color and Red Color combination and having minimum of
retro reflective exposed area of 125 Sq CM on top slots &
35 Sq CM on bottom slots and no edges shall be exposed
for tampering. This tubular delineator shall have a core and
shell construction, shell shall be made of tough, high
impact resistant, injection-molded, thermoplastic outer
body & the inner core shall consist of powder coated or
painted Mild steel of minimum thickness 1.0mm. & core-
shell structure shall be of height not less than 800 mm
above the ground and width not less than 80 mm. The
metallic core of the delineator shall extend 300mm beyond
the shell length from bottom for installing in the ground.
/ 180 /
CIDCO SCHEDULE OF RATES : 2015-2016
Signages…
ITEM
DESCRIPTION 20015-16 UNIT
CODE
The extended portion shall have slots to insert anchoring
rods for enhancing the concrete grip. The logo of the
manufacturer shall be embossed on either side of the ___.
The engineering thermoplastic used for making the
delineator body shall have minimum initial mechanical
properties of 600J/m tested in accordance with ASTM
D256 and shall retain at least 70% of these minimum initial
values when subjected to accelerated weathering for 1000
hrs as per ASTM G155 or UL 746C and as per IRC 79
specifications and including fixing the unit in M20 Grade
Cement Concrete of Size 30 x 30 x 40 cm including
excavation for pit. Vertical Delineators
Spec. No.: As directed by Engineer-in-charge
/ 181 /
CIDCO SCHEDULE OF RATES : 2015-2016
RECLAMATION
Reclamation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
RCL-001 Providing earthwork in embankment with approved 139.00 Cum.
materials obtained from cutting, including all leads and
lifts, laying in layers of 100 to 120 cms in thickness,
breaking clods, dressing to the required lines, curves,
grades, and section with watering and compacting with
static rollers etc. complete.
Notes:-
1. All payments towards the fees, taxes etc. shall be borne
by the contractor.
2. The Environmental cess shall be recovered at Rs.1/m3
of gross volume computed without deductions as
mentioned for the RA Bills or Final Bills.
3. For Embankment of any height with watering and
compaction without P.D. but laying in layers of 100 to
120 cms and the laboratory soil dry density shall be not
less than 1.52g/cc. at Optimum moisture content. (In
water logged areas)
4. The gross volume of the embankment shall reduced by
15% for RA Bills and 10% for Final Bill payments after
one lapse of monsoon.
RCL-001A Royalty Charges for murum, and ordinary earth to be used 0.00 Cum.
for Embankment and filling etc. for Item No. __ above as
directed by Engineer.
RCL-002 Providing earthwork in embankment with approved 235.00 Cum.
materials obtained from contractor's own source including
all leads and lifts, laying in layers, breaking clods, dressing
to the required lines, curves, grades, and section with
watering and compacting with static power rollers etc.
Complete.
Notes:-
1. All payments towards the fees, taxes etc. shall be borne
by the contractor.
2. No Payment will be released without Royalty Permit.
However Royalty will be reimbursed relevant item.
3. The Environmental cess shall be recovered at Rs.1/m3
of gross volume computed without deductions as
mentioned for the RA Bills or Final Bills.
/ 182 /
CIDCO SCHEDULE OF RATES : 2015-2016
Reclamation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
4. For Embankment of any height with watering and
compaction without P.D. but laying in layers of 100 to
120 cms and the laboratory soil dry density shall be not
less than 1.52g/cc. at Optimum moisture content. (In
water logged areas)
5. The gross volume of the embankment shall reduced by
15% for RA Bills and 10% for Final Bill payments after
one lapse of monsoon.
RCL-002A Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
for Embankment and filling etc. for Item No. ___ above as
directed by Engineer.
/ 183 /
CIDCO SCHEDULE OF RATES : 2015-2016
SOIL INVESTIGATION
Soil Investigation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
SI-001 Taking trial bores (100mm) in soil of all sorts of soft 1959.00 RM.
murum, hard murum and boulder and in soft rock including
all materials such as casing pipes and accessories oil grease,
steel rods & such other material as required, including
conveying such materials and machinery to site of work,
preserving the loose samples in glass / plastic jar & core
samples duly marked serially at site of work and conveying
the same to the respective office as directed complete.
SI-002 Taking trial bores (with diamond drill) in hard rock 2005.00 RM.
including all necessary material such as oil, grease, steel rods
& such material and machinery to site of work and
preserving the core samples duly marked serially and
painting the footage on site of work and conveying the
same to the respective office as directed complete.
SI-003 Conducting lab CBR test as per IS2720 (Part-16) 1987 The 5500.00 No.
item shall includes necessary cost for sample collection and
transporting it to soil testing lab. The rate includes for
testing of minimum 3 specimen. If the test results of initial
3 specimen deviate more than that specified in Table 2 of
clause No. 3, 4, 6, 4 of IRC 37 (2000) then additional 3
specimen shall be got tested at no extra cost. The rate
includes for all necessary ancillary tests mentioned in
appendix “A” of IS 2720 (Part-16) viz. Proctor density test,
swell pressure test etc. The appropriate surcharge Wt. shall
be provided while testing the specimen. The item shall
include all cost of necessary excavation at site. The test
results shall be submitted in report form with observation
sheet graph, tabular form and inference it any.
SI-004 Conducting Field CBR test as per IS 2720 (Part-31) 1990. 2100.00 No.
The item shall include necessary cost of mobilisation,
demobilisation of equipments, labour etc. at the specified
site and for testing at minimum 3 spots. If the test results
of initial 3 spots deviate more than that specified in Table 2
of clause No. 3, 4, 5, 6, 4 of IRC 37:2000 then additional 3
specimen shall be got tested at no extra cost. The rate
includes for all necessary ancillary tests mentioned in
appendix “A” of IS 2720 (Part-31) viz. particle size analysis,
/ 184 /
CIDCO SCHEDULE OF RATES : 2015-2016
Soil Investigation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
atterberges limit, insists moisture content. The rate includes
necessary excavation of pits at site. The test results shall be
submitted in a report form with observation sheet graphs,
tabular form & inference if any.
SI-005 Carrying out soil lab tests as specified on undistributed &
distributed soil samples for charactrization of soil samples
for characterization of soil profile at site lab & submission
of lab observation sheet, graphs etc. as per IS 2720 (latest
version) as directed by Engineer in charge (These tests are
to be carried out at IIT, Mumbai)
1) Neutral moisture content 244.00 Test
2) Wet & Dry Density 244.00 Test
3) Lab Vane Shear Test 484.00 Test
4) Tor Vane 484.00 Test
5) Pocket Soil Penetrometer 363.00 Test
6) Sieve Analysis 484.00 Test
7) Hydrometer 484.00 Test
8) Liquid and Plastic Limit 363.00 Test
9) Shrinkage Limit 363.00 Test
10) Specific Gravity 484.00 Test
11) Relative Density 484.00 Test
12) Unconfined Compressive Strength 1089.00 Test
A) TRIAXIAL
i) Unconsilated Undrained 1452.00 Test
ii) Consolited Undrained 1562.00 Test
iii) Consolited Drained 1694.00 Test
iv) Consilidation 1562.00 Test
v) Direct Shear Test 1391.00 Test
B) Proctor Compaction Test
i) Standard Proctor Compaction Test 1331.00 Test
ii) Modified Proctor Compaction Test 1210.00 Test
iii) California Bearing Ratio (Lab CBR) 1562.00 Test
/ 185 /
CIDCO SCHEDULE OF RATES : 2015-2016
Soil Investigation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
C) Permeability
i) Constant Head Method 1089.00 Test
ii) Falling head Method 1089.00 Test
iii) Free Swell Index 484.00 Test
iv) Swelling Pressure 1562.00 Test
D) Chemical Analysis of Soil
i) pH Value 484.00 Test
ii) Chloride (cl) 605.00 Test
iii) Sulphate (SO3) 605.00 Test
E) Chemical Analysis of Water
i) pH Value 484.00 Test
ii) Chloride (cl) 605.00 Test
iii) Sulphate (SO3) 605.00 Test
F) Test on Rock Samples
i) Unconfined Compressive Strenth 1562.00 Test
ii) Dry Density 484.00 Test
iii) Porosity 484.00 Test
iv) Water Absorption 484.00 Test
v) Specific Gravity 484.00 Test
vi) Modulus of Elasticity 4840.00 Test
vii) Point Load Index 1452.00 Test
viii) Brazilian Index 1452.00 Test
SI-006 Providing TUNTAPPA core box of Jungle wood of size 2780.00 No.
1.25 x 0.55 x 0.15 m for preserving the rock core samples
with all fixtures and fasternings and handles including
locking arrangement with lock necessary painting and
lettering etc. complete.
SI-007 To carry out plate load test to determine modulus of sub- 25000.00 No.
grade reaction (K-value) of unbound / semi-bound
macadam (GSB, WMM, BBM) in field as per IS Code No.
9214-1979. The item includes to conduct one test per
location. The test shall be conducted on 75cm. dia &
25mm thick plate with stiffening plates of smaller size of
/ 186 /
CIDCO SCHEDULE OF RATES : 2015-2016
Soil Investigation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
60,45 & 30 cm. dia and 25mm thick each shall be used.
Vertical movement shall be measured by three dial gauges
placed at 1200 preferably 4 dial gauges placed at 900. The
load shall be measured using 15 MT capacity proving ring /
hydraulic jack with pressure gauge duly calibrated from time
to time. The test results shall be submitted in a report form
with observation sheets, graphs, tabular form & inferences
if any.
SI-008 Mobilisation of machinery equipment labour and personal 6425.00 Job
at site to carry out plate load test / californiya bearing ratio
test / Benkalmen beam test for finding bearing capacity of
strata/CBR/ deflection of road surface including
demobilisation etc. Complete.
SI-009 Shifting and locating instrument from one location to
another Plate Load Test.
a) Shifting upto 300m 1247.00 Shift
b) 300m to 600m 1621.00 Shift
c) 600m & above 2295.00 Shift
SI-010 Conducting Benkleman test as specified location by 10154.00 Test
observing deflection at 50 m c/c for selected 500 m stretch
for 1 km of road length or as directed by Engineer-in-
charge., worst affected portion including additional 4 tests if
peak results vary by more than 33% from mean as per IRC
– 81 and submitting observation / results in format given in
code etc. complete and as directed by Engineer in charge.
The test to be carried out as per the procedure prescribed in
IRC-81 (1997).
SI-011 Conducting standard penetratation test of soil, sand by split
spoon sample for ___diameter bore hole including labour &
material etc. complete.
a) 75 mm 300.00 No.
b) 100 mm 396.00 No.
c) 150 mm 596.00 No.
SI-012 Carrying out vane shear test in bore holes as per IS
4434/1978 at any depth in existing borehole, as directed by
Engineer in charge including cleaning the boreholes before
conducting the test complete.
/ 187 /
CIDCO SCHEDULE OF RATES : 2015-2016
Soil Investigation…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
a) Lab Vane shear test 1140.00 No.
b) Field Vane shear Test 1150.00 No.
SI-013 To carryout plate load test to determine safe bearing 16403.00 No.
capacity of soil / strata as per IS Code No. 1888. The test
shall be conducted on square plates of size 600 mm x 600
mm. & 25 mm thick. Vertical movement shall be measured
by three dial gauges preferably four dial gauges at 90 degree.
The loads shall be measured using 15 MT capacity proving
ring / hydraulic jack and pressure gauge duly calibrated
from time to time. The tests results shall be submitted in a
report form with observation sheets, graphs, tabular form &
inferences, if any.
SI-014 Preparation and submission of appraisal report for soil 42329.00 No.
investigation work.
/ 188 /
CIDCO SCHEDULE OF RATES : 2015-2016
SURVEY
Survey…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
SUR-001 Carrying out plane table survey for locating road, culverts, 4339.00 Ha.
structure, Electrical / telephone lines, optical fibre cables,
high tenssion pylons, U.G. Service Lines(if markers are
available), water lines, gas lines, sewer lines, S.W.Drains
etc.and preparation of computerized survey sheets with
colour paper prints in five copies with computer diskets
containing all drawings etc. complete.
SUR-002 Providing & Fixing grid pillars of 300mm dia & 900mm 1723.00 No.
height (600mm below ground & 300mm above ground)
RCC hume pipe filled with 1:3:6 concrete and with M.S.
plate 150mm dia. with 4 nos. 8mm dia. 300mm long hold
fast embedded on top including excavation, marking
reference point at 50 m. / 100 m. grid or at suitable location
as per the directive of engineer in charge.
SUR-003 Transferring B.M. to the area to be surveyed by fly back 3221.00 Km.
method or double treasure method and establishing the
B.M. on existing permanent structure or on such
monument which shall long last etc. complete.
SUR-004 Demarcation of the Road / chanel / bridge alignment by 12835.00 Km.
traversing along the existing / proposed route with one
second theodolite. Taking angles & distance at turning
points including transfer of Co-ordinate from known point
to survey area and as directed by Engineer-in-charge &
providing 5 Nos. colour paper prints with drawing in soft
copy format.
SUR-005 Providing & fixing the C.C. stone at every 50m / 100m grid 733.00 No.
or at every turning points of size 150 x 150 x 600mm long,
300mm burried in C.C. 1:3:6 shall be painted by P.O. red
colour and written the chinage / co-ordinate as directed etc.
complete.
SUR-006 Carrying out spot level survey on every 20 x 20m. grid 3472.00 Ha.
Interval and including interpoleting controls at 0.5m interval
and preparation & submission of drawings in colour paper
prints in five copies & copy in soft format.
SUR-006A Same as Item.No.SUR-006 on every 10 m x 10 m grid 6474.00 Ha.
interval including interpoliting controls at 0.5m interval.
/ 189 /
CIDCO SCHEDULE OF RATES : 2015-2016
Survey…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
SUR-007 Providing and erecting 100 mm. dia. Hume pipe at 50/100 1375.00 No.
m. interval or at turning point for demarcation of boundary.
1000 mm. long filled with cc 1:3:6: painted with oil paint as
directed.
SUR-008 Demarcation of plot of verious sizes as follows
a) from 10 Sq.M. To upto & including 100 Sq.M. 786.00 Per Plot
b) 100 Sq.M. TO upto & including 300 Sq.M. 995.00 Per Plot
c) 300 Sq.M. TO upto & including 500 Sq.M. 1214.00 Per Plot
d) 500 Sq.M. TO upto & including 700 Sq.M. 1316.00 Per Plot
e) 700 Sq.M. TO upto & including 1000 Sq.M. 1418.00 Per Plot
/ 190 /
CIDCO SCHEDULE OF RATES : 2015-2016
EXCAVATION
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXSW-001 Excavation for foundation to any depth in all types of earth, 66.00 Cum.
soils of all types such as sand, gravel, slush, soft murum,
hard murum with or without boulders including shoring
and strutting whichever necessary including disposing off
the surplus materials within 50m, beyond the work site,
stacking and spreading as directed. The item includes heavy
dewatering by using pumps or manually, shoring, strutting
and preparing the bed for foundation and necessary back
filling etc. complete.
Note : All payments towards the fees, taxes etc. shall be
borne by the contractor.
EXSW-002 Excavation for foundation to any depth in soft rock 140.00 Cum.
including shoring and strutting whichever necessary
including disposing off the surplus materials within 50m,
beyond the work site, stacking and spreading as directed.
The item includes heavy dewatering by using pumps or
manually, shoring and strutting and preparing the bed for
foundation and necessary back filling etc. complete.
Note : All payments towards the fees, taxes etc. shall be
borne by the contractor.
EXSW-003 Excavation for foundation in hard rock upto any depth with 220.00 Cum.
all lifts by open or controlled blasting including trimming
and levelling the bed, removing the excavated materials
upto a distance of 50m beyond the work site with all lifts,
stacking the serviceable materials in measurable heaps as
directed. The item includes heavy dewatering using pumps
or manually, shoring and strutting and preparing the bed for
foundation and necessary back filling etc. complete.
Notes :
1) All payments towards the fees, taxes etc. shall be
borne by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for Royalty
Payment.
/ 191 /
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXSW-004 Excavation for foundation in hard rock upto any depth with 800.00 Cum.
all lifts by chiseling manually or by mechanical means such
as hydraulic rock driller including wedging, line drilling etc.
including trimming and levelling the bed, removing the
excavated materials upto a distance of 50m beyond the
work site with all lifts, stacking the serviceable materials in
measurable heaps as directed. The item includes heavy
dewatering using pumps or manually, shoring and strutting
and preparing the bed for foundation and necessary back
filling etc. complete.
Notes :
1) All payments towards the fees, taxes etc. shall be borne
by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for Royalty
Payment.
EXSW-005 Providing and laying dry trap metal soling 15 cm. to 20 cm. 412.00 Cum.
thick including hand packing with metal, rubble chips,
application of required murum/stone dust blindage and
compaction including watering etc. complete with all leads,
including necessary heavy dewatering either mechanically or
manually etc. complete.
Spec. No.: Rd. 19 Page No. 370/2012
/ 192 /
CIDCO SCHEDULE OF RATES : 2015-2016
CONCRETE
Concrete…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
CONSW- Providing and laying in situ cement concrete M20 grade 5088.00 Cum.
001 using design mix with minimum cement content as per IS
456 with maximum water cement ratio 0.45 using maximum
25/30 mm size and down trap metal for foundation and
bedding with all labours, materials, plant & equipments,
shuttering form work, staging, including transporting,
placing, vibrating with mechanical vibrator, finishing and
curing etc. complete. The item also includes heavy
dewatering by using pumps or manually. The cost also
includes all types of taxes, sales tax, insurance, cess levied by
local authority etc. complete.
Spec. No.Bd.E.2 Page No.288 and B.7 Page No.70
CONSW- Providing and casting M25 grade ofconcrete using design 5278.00 Cum.
002 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC raft
foundation as per detailed drawing, with maximum water
cement ratio of 0.50 (for moderate condition) as directed,
with contractors labours, materials, plant & equipments,
scaffolding, shuttering, form work, staging including
transporting, placing vibrating with mechanical surface
vibrator and all lifts and leads, curing, adding required
dosages (as per the manufacturers recommendations) of
approved plasticisers as admixtures (excluding cost of
reinforcement). The item includes heavy dewatering by
using pumps or manually. The cost also includes all types of
taxes, sales tax, insurance, cess levied by local authority etc.
complete.
CONSW- Providing and casting M30 grade of concrete using design 5468.00 Cum.
003 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC raft
foundation as per detailed drawing, with maximum water
cement ratio of 0.45 (for severe condition) as directed, with
contractors labours, materials, plant & equipments,
scaffolding, shuttering, form work, staging including
transporting, placing vibrating with mechanical surface
/ 193 /
CIDCO SCHEDULE OF RATES : 2015-2016
Concrete…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
vibrator and all lifts and leads, curing, adding required
dosages (as per the manufacturers recommendations) of
approved plasticiser as admixtures (excluding cost of
reinforcement). The item includes heavy dewatering by
using pumps or manually. The item includes performing
NDT as directed. The cost also includes all types of taxes,
sales tax, insurance, cess levied by local authority etc.
complete.
CONSW- Providing and casting M20 grade of concrete using design 8093.00 Cum.
004 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC abutments,
walls, pardi, haunches etc. as per detailed drawing, with
maximum water cement ratio of 0.45 (for severe condition)
as directed, with contractors labours, materials, plant &
equipments, scafolding, shuttering, form work, staging
including transporting, placing vibrating with mechanical
surface vibrator and all lifts and leads, curing,adding
required dosages (as per the manufacturers
recommendations) of approved plasticiser as admixtures
(excluding cost of reinforcement). The item includes heavy
dewatering to any extent by any means. The cost also
includes all types of taxes, exice duty, sales tax, insurance,
cess levied etc.
Spec. No.: Bd.F.11 Page No. 96
CONSW- Providing and casting M25 grade of concrete using design 8280.00 Cum.
005 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC abutments,
walls, pardi, haunches etc. as per detailed drawing, with
maximum water cement ratio of 0.50 (for moderate
condition) as directed, with contractors labours, materials,
plant & equipments, scaffolding, shuttering, form work,
staging including transporting, placing vibrating with
mechanical surface vibrator and all lifts and leads, curing,
adding required dosages (as per the manufacturers
recommendations) of approved plasticiser as admixtures
(excluding cost of reinforcement). The item includes
dewatering to any extent by any means.
/ 194 /
CIDCO SCHEDULE OF RATES : 2015-2016
Concrete…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
CONSW- Providing and casting M30 grade of concrete using design 8467.00 Cum.
006 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC abutments,
walls, pardi, haunches etc. as per detailed drawing, with
maximum water cement ratio of 0.45 (for severe condition)
as directed, with contractors labours, materials, plant &
equipments, scaffolding, shuttering, form work, staging
including transporting, placing vibrating with mechanical
surface vibrator and all lifts and leads, curing,adding
required dosages (as per the manufacturers
recommendations) of approved plasticiser as admixtures
(excluding cost of reinforcement). The item includes heavy
dewatering to any extent by any means.
CONSW- Providing and casting M-25 grade of concrete using mix 7876.00 Cum.
007 design with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for RCC slab and
approach slab etc. as per detailed drawing, with maximum
water cement ratio of 0.50 (for moderate condition) as
directed, with contractors labours, materials, plant &
equipments, scafolding, shuttering, form work, staging
including transporting, placing vibrating with mechanical
surface vibrator and all lifts and leads, curing, adding
required dosages (as per the manufacturers
recommendations) of approved plasticiser as admixtures
(excluding cost of reinforcement). The item includes heavy
dewatering to any extent by any means.
CONSW- Providing and casting M30 grade of concrete using design 8063.00 Cum.
008 mix with minimum cement content as per IS 456 in situ
controlled concrete using maximum 25mm/30mm size and
down graded aggregate of trap metal for approach slab
and RCC slab etc. as per detailed drawing, with maximum
water cement ratio of 0.45 (for severe condition) as
directed, with contractors labours, materials, plant &
equipments, scafolding, shuttering, form work, staging
/ 195 /
CIDCO SCHEDULE OF RATES : 2015-2016
Concrete…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
including transporting, placing vibrating with mechanical
surface vibrator and all lifts and leads, curing, adding
required dosages (as per the manufacturers
recommendations) of approved plasticiser as admixtures
(excluding cost of reinforcement). The item includes heavy
dewatering to any extent by any means. The cost also
includes all types of taxes, excise duty, sales tax, insurance,
cess levied etc.
/ 196 /
CIDCO SCHEDULE OF RATES : 2015-2016
STEEL WORKS
Steel Works…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
SW-001 Providing and placing, fixing in all RCC item of foundation,
sub-structure and superstructures, M.S./H.Y.S.D./T.M.T.
of various diameters as per IS 432 (latest version) of
approved make for reinforcement in any position as per
detailed drawing or as directed for all diameters including,
cutting, bending in shape, fixing in position with galvanised
binding wire of 17 guage or tack welding as per IS 9417
(latest version) as directed etc. complete including
dewatering using pumps or manually during placing
reinforcement and keeping dry during concreting of RCC
members. The cost also includes all types of taxes, excise
duty, sales tax, insurance, cess levied by local authority etc.
complete.
Note :- The quantity to be measured and paid for this item
shall not include wastage in cutting. Actually installed and
placed in position steel shall be paid for including hooks,
laps, bends, pins and chairs. No separate payment shall be
made for binding wire or tack welding.
Spec. No.: Bd.F.17, Page No. 98
a) Mild Steel 54784.00 MT
b)TMT Steel 70159.00 MT
/ 197 /
CIDCO SCHEDULE OF RATES : 2015-2016
MISCELLANEOUS
Miscellaneous…
ITEM - 2015-16
DESCRIPTION UNIT
CODE
MISCSW- Providing and fixing 100 mm dia AC/PVC pipes for weep 129.00 Rmt.
001 holes, staggered as per drawing or as directed by Engineer-
In-Charge etc. complete.
Spec. No.: MORT & H -2700 & 2200
MISCSW- Providing trap rubble filling behind the walls/ abutments/ 660.00 Cum.
002 returns including filling voids with gravel, hand packing and
compacting the rubble etc. complete.
Spec. No.: BR.34 Page No. 146
MISCSW- Disposal of excavated material upto 0.5 km lead (dumping 145.61 Cum.
003 yard) including loading, unloading, transporting by
mechanical or other means, stacking, spreading, levelling as
directed by Engineer-in-charge etc. complete beyond initial
lead of 50m.
MISCSW- Disposal of excavated material beyond 0.5 km and upto 1 156.34 Cum.
004 km lead (dumping yard) including loading, unloading,
transporting by mechanical or other means, stacking,
spreading, leveling as directed by Engineer-in-charge etc.
complete beyond initial lead of 50m.
MISCSW- Disposal of excavated material beyond 1 km and upto 1.5 166.89 Cum.
005 km lead (dumping yard) including loading, unloading,
transporting by mechanical or other means, stacking,
spreading, levelling as directed by Engineer-in-charge etc.
complete beyond initial lead of 50m.
MISCSW- Disposal of excavated material beyond 1.5 km and upto 2 146.01 Cum.
006 km lead (dumping yard) including loading, unloading,
transporting by mechanical or other means, stacking,
spreading, leveling as directed by Engineer-in-charge etc.
complete beyond initial lead of 50m.
MISCSW- Disposal of excavated material beyond2.00 km and upto 2.5 155.87 Cum.
007 km lead (dumping yard) including loading, unloading,
transporting by mechanical or other means, stacking,
spreading, leveling as directed by Engineer-in-charge etc.
complete beyond initial lead of 50m.
/ 198 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM - 2015-16
DESCRIPTION UNIT
CODE
MISCSW- Disposal of excavated material beyond 2.50 km and upto 166.32 Cum.
008 3.0 km lead (dumping yard) including loading, unloading,
transporting by mechanical or other means, stacking,
spreading, leveling as directed by Engineer-in-charge etc.
complete beyond initial lead of 50m.
/ 199 /
CIDCO SCHEDULE OF RATES : 2015-2016
EXCAVATION
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXSL- Excavation for pipe trenches/all type of foundations in 81.00 Cum.
001 earth, soil of all types, sand, gravel, soft murum, hard
murum, hard murum with boulders, soft rock, etc. for lift
upto 1.5 m. including removing the excavated material
upto a distance of 50 m beyond the construction area,
stacking and spreading as directed, including all lifts
preparing the bed for bed concrete/ foundations etc.
complete including of heavy dewatering either manually or
mechanically by all means upto any extent including
shoring and strutting etc. complete.
Notes : All payments towards the fees, taxes etc. shall be
borne by the contractor.
EXSL- Add for every additional lift of 1.5 m. 156.00 Cum.
002 beyond initial lift of 1.5 m. For item no.EXSL001.
EXSL- Excavation for foundations/pipe trenches in hard rock 220.00 Cum.
003 by control blasting, wedging, line drilling, or any other
type by using chemicals etc. including trimming and
levelling the bed, removing the excavated material upto a
distance of 50 m beyond the construction area including
heavy dewatering upto any extent by mechanical means
with the help of pumping machinery with the desired H.P.
including shoring and strutting, removing away the
excavated material from site after taking measurement etc.
complete. ( Upto 1.50m lift) (The rock thus available
from excavation will be the property of contractor.
Notes :
1) All payments towards the fees, taxes etc. shall be borne
by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for Royalty
Payment
EXSL- Add for every additional lift of 1.5 m. beyond initial lift of 424.00 Cum.
004 1.5 m. for item no.EXSL003.
/ 200 /
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXSL- Excavation for foundation/pipe trenches in hard rock and 800.00 Cum.
005 concrete road by chiselling, wedging, line drilling by
mechanical means with the help of hydraulic rock driller
etc. including trimming and levelling the bed, removing
the excavated material upto a distance of 50 meters
beyond the area , including stacking as directed by
Engineer-in-charge, heavy dewatering upto any extent by
mechanical means with the help of pumping machinery
with the desired H.P. all lifts etc. complete.(Upto 1.50m
lift)
Notes :
1) All payments towards the royalty, fees, taxes etc. shall
be borne by the contractor.
2) The excavated hard rock shall be the contractor's
property. Agency will be solely responsible for Royalty
Payment
EXSL- Add for every additional lift of 1.5 m. beyond initial lift of 21.00 Cum.
005A 1.5 m. for item No.EXSL005.
EXSL- Excavation for foundation/pipe trenches in ash 307.00 Cum.
006 muddy/marshy/Slushy/soil including use of poclain,
labour for dewatering during execution including
removing the excavated material upto a distance of 50m
and lifts as below, stacking, spreading as directed
preparing the bed by cleaning the mud, labour required
for execution for shuttering item etc. complete.
lift 0 to 1.5 M
EXSL- Add for every additional lift beyond initial lift of 1.5m 21.00 Cum.
006A For Item No. EXSL007
EXSL-007 Filling in Pipe Trenching / plinth and floors with approved 62.00 Cum.
excavated material in 15 cm to 20 cm layers including
watering and compaction complete.
EXSL-008 Filling in Pipe Trenching / plinth and floors with 265.00 Cum.
contractor's murum in 15cm to 20cm layers including
watering and compaction complete.
EXSL- Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
008A for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
/ 201 /
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXSL- Providing dry trap/granite/quartzite/gneiss rubble stone 412.00 Cum.
009 soling 230 mm thick including hand packing with chips
and compacting heavy dewatering upto any extent by
mechanical means withthe help of pumping machinery
with the desired H.P. all lifts, etc. complete.
/ 202 /
CIDCO SCHEDULE OF RATES : 2015-2016
CONCRETE
Concrete…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
CONSL- Providing transporting, lowering and placing of cast in situ 5088.00 Cum.
001 cradels M-20 grade of concrete with minimum cement
content as per IS 456 and/or as directed by Engineer-in-
charge for all diameters of sewer line including providing
lifting arrangement with all leads, transporting, lowering,
laying in pipe trenches / foundation etc. complete
including heavy dewatering upto any extent by mechanical
means with the help of pumping machinery with the
desired H.P. all lifts, while laying.
/ 203 /
CIDCO SCHEDULE OF RATES : 2015-2016
R.C.C. PIPES
R.C.C. Pipes…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 611.00 Rmt.
001 manufactured as per IS:458 ( latest version ) having ISI of
250 dia NP2 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 803.00 Rmt.
002 manufactured as per IS:458 (Latest version) having ISI of
300 dia NP2 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 1242.00 Rmt.
003 manufactured as per IS:458 ( latest version ) having ISI of
350 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
/ 204 /
CIDCO SCHEDULE OF RATES : 2015-2016
R.C.C. Pipes…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 1844.00 Rmt.
004 manufactured as per IS:458 (latest version ) having ISI of
400 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 2321.00 Rmt.
005 manufactured as per IS:458 ( latest version ) having ISI of
450 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 2253.00 Rmt.
006 manufactured as per IS:458 ( latest version ) having ISI of
500 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 3378.00 Rmt.
007 manufactured as per IS:458 (latest version ) having ISI of
600 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
/ 205 /
CIDCO SCHEDULE OF RATES : 2015-2016
R.C.C. Pipes…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 4530.00 Rmt.
008 manufactured as per IS:458 ( latest version ) having ISI of
700 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 5387.00 Rmt.
009 manufactured as per IS:458 ( latest version ) having ISI of
800 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 6204.00 Rmt.
010 manufactured as per IS:458 ( latest version ) having ISI of
900dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 7539.00 Rmt.
011 manufactured as per IS:458 (latest version ) having ISI of
1000 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and and unloading and hydraulic testing as
per I.S. 458 (latest version) including necessary heavy
dewatering by all means up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
/ 206 /
CIDCO SCHEDULE OF RATES : 2015-2016
R.C.C. Pipes…
ITEM –
DESCRIPTION 2015-16 UNIT
CODE
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 8808.00 Rmt.
012 manufactured as per IS:458 ( latest version ) having ISI of
1100 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all
means up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 10270.00 Rmt.
013 manufactured as per IS:458 (latest version) having ISI of
1200 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all
means up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
RCCP- Providing lowering, laying and jointing RCC, S/S pipes 12290.00 Rmt.
014 manufactured as per IS:458 (latest version ) having ISI of
1400 dia NP3 class with rubber ring joints as directed in
proper grade including cost of materials, rubber rings, all
taxes (central and local) transportation, loading and
unloading and hydraulic testing as per I.S. 458 (latest
version) including necessary heavy dewatering by all means
up to any extent etc. complete.
Note : The contractor has to make his own arrangement
for testing the pipeline as per I.S. standard.
/ 207 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 208 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 209 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 210 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 211 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 212 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 213 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 214 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 215 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 216 /
CIDCO SCHEDULE OF RATES : 2015-2016
MISCELLANEOUS
Miscellaneous…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
MISCSL- Refilling in the pipe trenches/all pipe foundations as 62.00 Cum.
001 directed with approved murum obtained from excavated
material in 15 cm to 20cm layers with all leads and all lifts
including watering and compaction etc. complete.
MISCSL- Filling in pipe trenches/on all type of foundations with 265.00 Cum.
002 approved murum obtained from approved quarry arranged
by the contractor, laying in 15 cm to 20 cm layers including
loading, transporting, unloading upto given site, stacking,
spreading, levelling as directed and laying in layers of 15 cm
to 20 cm including watering and compaction layer by layer
with the help of mechanical rammer with all leads and lifts
etc. complete (Environmental cess @ Rs. 1.00/cu.m. of
gross quantity without standard deduction will be deducted
from the contractor's bill.
MISCSL- Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
002A for Embankment and filling etc. for Item No. ____ above
as directed by Engineer.
MISCSL- Disposal of surplus excavated materials upto specified lead 145.61 Cum.
003 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead Upto 0.5 Km
MISCSL- Disposal of surplus excavated materials upto specified lead 156.34 Cum.
004 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead beyond 0.5 km but Upto 1.0 Km
MISCSL- Disposal of surplus excavated materials upto specified lead 166.89 Cum.
005 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead beyond 1.0 km but Upto 1.5 Km
MISCSL- Disposal of surplus excavated materials upto specified lead 176.91 Cum.
006 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead beyond 1.5 km but Upto 2.0 Km
MISCSL- Disposal of surplus excavated materials upto specified lead 186.72 Cum.
007 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead beyond 2.0 km but Upto 2.5 Km
/ 217 /
CIDCO SCHEDULE OF RATES : 2015-2016
Miscellaneous…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
MISCSL- Disposal of surplus excavated materials upto specified lead 197.22 Cum.
008 and all lifts including loading, unloading, stacking and
spreading as directed by Engineer-in-Charge etc. complete
Lead beyond 2.0 km but Upto 3.0 Km
/ 218 /
CIDCO SCHEDULE OF RATES : 2015-2016
STEEL
Steel…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
S-001 Providing and placing, fixing in all RCC item of foundation, 70159.00 M.T.
sub-structure and superstructures TMT bar reinforcement
of various diameters as per IS 1786 (1985) of Fe 415
approved make for reinforcement in any position as per
detailed drawing or as directed for all diameters including,
cutting, bending in shape, fixing in position with galvanized
binding wire of 17 guage or tack welding as per IS 9417
(latest version) as directed etc. complete including
dewatering using pumps or manually during placing
reinforcement and keeping dry during concreting of RCC
members. The cost also includes all types of taxes, excise
duty, sales tax, insurance , cess levied by local authority etc.
Note : The quantity to be measured and paid for this item
shall not include wastage in cutting. Actually installed and
placed in position steel shall be paid for including hooks,
laps, bends, pins and chairs. No separate payment shall be
made for binding wire or tack welding.
S-002 Providing and placing, fixing in all RCC item of foundation, 54784.00 M.T.
sub-structure and superstructures Mild steel reinforcement
of various diameters as per IS 432 - 1982 (latest version) of
approved make for reinforcement in any position as per
detailed drawing or as directed for all diameters including,
cutting, bending in shape, fixing in position with galvanized
binding wire of 17 gauge or tack welding as per IS 9417
(latest version) as directed etc. complete including
dewatering using pumps or manually during placing
reinforcement and keeping dry during concreting of RCC
members. The cost also includes all types of taxes, excise
duty, sales tax, insurance, cess levied by local authority etc.
Note : The quantity to be measured and paid for this item
shall not include wastage in cutting. Actually installed and
placed in position steel shall be paid for including hooks,
laps, bends, pins and chairs. No separate payment shall be
made for binding wire or tack welding.
/ 219 /
CIDCO SCHEDULE OF RATES : 2015-2016
EXCAVATION
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXWS- Excavation for pipe trenches to any depth in all types of 66.00 Cum.
001 earth, soils of all types such as sand, gravel, slush, soft
murum, hard murum with or without boulders including
disposing off the surplus materials within 50m, beyond the
work site, stacking and spreading as directed. The item
includes heavy dewatering by using pumps or manually,
shoring, strutting and preparing the bed for foundation etc.
complete.
Note : All payments towards the fees, taxes etc. shall be
borne by the contractor.
EXWS- Excavation for foundation to any depth in soft rock 140.00 Cum.
002 including disposing off the surplus materials within 50m,
beyond the work site, stacking and spreading as directed.
The item includes heavy dewatering by using pumps or
manually, shoring and strutting and preparing the bed for
foundation etc. complete.
Note : All payments towards the fees, taxes etc. shall be
borne by the contractor.
EXWS- Excavation for pipe trenches / foundation in hard
003 strata___ including removing the excavated materials upto
a distance of 50 metres and all lift, stacking and spreading
as directed including dewatering unless provided elsewhere
directed the bed for the foundation complete including
shoring and strutting etc. complete.
Note :
The excavated hard rock shall be the contractor's property
& Agency will be solely responsible for Royalty Payment
for a) only.
a) Hard Rock by blasting 220.00 Cum.
b) Hard Rock by chiselling wedging 800.00 Cum.
EXWS- Dewatering the excavated trenches and pools of water by
004 using pumps and other devices, including disposing of the
water to a safe distance as directed.
a) By using 3 H.P. Pumps 54.00 Hr.
b) By using 5 to 9 H.P. Pumps 76.00 Hr.
c) By using 10 to 19 H.P. Pumps 101.00 Hr.
/ 220 /
CIDCO SCHEDULE OF RATES : 2015-2016
Excavation…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
EXWS- Filling in Pipe Trenching / plinth and floors with approved 62.00 Cum.
005 excavated material in 15 cm to 20 cm layers including
watering and compaction complete.
EXWS- Filling in Pipe Trenching / plinth and floors with 265.00 Cum.
006 contractor's murum in 15cm to 20cm layers including
watering and compaction complete.
EXWS- Royalty Charges for murum, and ordinary earth to be used 141.34 Cum.
006A for Embankment and filling etc. for Item No. ____ above as
directed by Engineer.
EXWS- Providing dry trap / rubble stone soling 15cm to 20 cm 989.00 Cum.
007 thick including hand packing and compacting etc.
complete.
EXWS- Providing and filling in the foundation with sand of 949.00 Cum.
008 approved quality including watering, compaction etc.
complete.
/ 221 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 222 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 223 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 224 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 225 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 226 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 227 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 228 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 229 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 230 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 231 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 232 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 233 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 234 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 235 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 236 /
CIDCO SCHEDULE OF RATES : 2015-2016
PIPE APPURTENANCES
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
PA-001 Providing and supplying ISI mark CI D/F reflux valves
(non-return valves), railway freight, inspection charges
unloading from railway wagon, loading into truck,
transportation upto departmental stores/site, unloading,
stacking etc. complete. Reflux valves as per I.S.5312 Part I
(1984)
a) Without by pass arrangement – PN – 1.
i. 50mm 2977.00 No.
ii. 65 mm. 3486.00 No.
iii. 80 mm. 3670.00 No.
iv. 100 mm. 5125.00 No.
v. 125 mm. 7317.00 No.
vi. 150 mm. 8860.00 No.
vii. 200 mm. 15925.00 No.
viii. 250 mm. 27175.00 No.
ix. 300 mm. 37237.00 No.
x. 350 mm. 57921.00 No.
xi. 400 mm. 68897.00 No.
xii. 450 mm. 99069.00 No.
xiii. 500 mm. 146791.00 No.
xiv. 600 mm. 179755.00 No.
xv. 700 mm. 421646.00 No.
b) With by pass arrangement – PN – 1.
i. 80 mm. 4238.00 No.
ii. 100 mm. 6037.00 No.
iii. 125 mm. 8221.00 No.
iv. 150 mm. 9763.00 No.
v. 200 mm. 18202.00 No.
vi. 250 mm. 29751.00 No.
vii. 300 mm. 39936.00 No.
/ 237 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
viii. 350 mm. 65477.00 No.
ix. 400 mm. 79232.00 No.
x. 450 mm. 102800.00 No.
xi. 500 mm. 166837.00 No.
xii. 600 mm. 206718.00 No.
xiii. 700 mm. 638298.00 No.
xiv. 750 mm. 698676.00 No.
xv. 800 mm. 759056.00 No.
xvi. 900 mm. 828061.00 No.
xvii. 1000 mm. 966072.00 No.
c) Without by pass arrangement–PN - 1.6
i. 50 mm. 2904.00 No.
ii. 65 mm. 3137.00 No.
iii. 80 mm. 5146.00 No.
iv. 100 mm. 6591.00 No.
v. 125 mm. 9183.00 No.
vi. 150 mm. 12484.00 No.
vii. 200 mm. 21856.00 No.
viii. 250 mm. 35087.00 No.
ix. 300 mm. 47436.00 No.
x. 350 mm. 72402.00 No.
xi. 400 mm. 86121.00 No.
xii. 450 mm. 115134.00 No.
xiii. 500 mm. 183489.00 No.
xiv. 600 mm. 224693.00 No.
xv. 700 mm. 332109.00 No.
xvi. 750 mm. 381247.00 No.
xvii. 800 mm. 433775.00 No.
xviii. 900 mm. 548996.00 No.
xix. 1000 mm. 677773.00 No.
/ 238 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xx. 1100 mm. 820104.00 No.
xxi. 1200 mm. 976352.00 No.
d) With by pass arrangement – PN - 1.6
i. 50 mm. 2981.00 No.
ii. 65 mm. 3354.00 No.
iii. 80 mm. 4936.00 No.
iv. 100 mm. 6383.00
v. 125 mm. 8920.00 No.
vi. 150 mm. 10827.00 No.
vii. 200 mm. 21868.00 No.
viii. 250 mm. 33044.00 No.
ix. 300 mm. 49925.00 No.
x. 350 mm. 77142.00 No.
xi. 400 mm. 99040.00 No.
xii. 450 mm. 118220.00 No.
xiii. 500 mm. 191894.00 No.
xiv. 600 mm. 258397.00 No.
xv. 700 mm. 338268.00 No.
xvi. 750 mm. 388317.00 No.
xvii. 800 mm. 441819.00 No.
xviii. 900 mm. 559177.00 No.
xix. 1000 mm. 690341.00 No.
xx. 1100 mm. 835313.00 No.
xxi. 1200 mm. 994091.00 No.
PA-002 Providing double flange sluice valve confirming for IS : 2906
/ 14846 including worn gear arrangements as per test
pressure stainless steel spindle, caps including all taxes,
transportation etc. complete.
a) Sluice valves – PN – 1 – without bypass
i. 50 mm. 3765.00 No.
ii. 65 mm. 4454.00 No.
/ 239 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iii. 80 mm. 4604.00 No.
iv. 100 mm. 6131.00 No.
v. 125 mm. 7669.00 No.
vi. 150 mm. 9195.00 No.
vii. 200 mm. 16668.00 No.
viii. 250 mm. 25770.00 No.
ix. 300 mm. 32717.00 No.
x. 350 mm. 48129.00 No.
xi. 400 mm. 63365.00 No.
xii. 450 mm. 68124.00 No.
xiii. 500 mm. 98185.00 No.
xiv. 600 mm. 145465.00 No.
xv. 700 mm. 270387.00 No.
xvi. 750 mm. 306308.00 No.
xvii. 800 mm. 373650.00 No.
xviii. 900 mm. 489951.00 No.
xix. 1000 mm. 732770.00 No.
xx. 1100 mm. 939426.00 No.
xxi. 1200 mm. 1110697.00 No.
b) Sluice valves – PN – 1 – with bypass
i. 50 mm. 3952.00 No.
ii. 65 mm. 4464.00 No.
iii. 80 mm. 4604.00 No.
iv. 100 mm. 6131.00 No.
v. 125 mm. 7669.00 No.
vi. 150 mm. 9684.00 No.
vii. 200 mm. 16698.00 No.
viii. 250 mm. 25800.00 No.
ix. 300 mm. 32747.00 No.
x. 350 mm. 49918.00 No.
/ 240 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xi. 400 mm. 63459.00 No.
xii. 450 mm. 78240.00 No.
xiii. 500 mm. 98331.00 No.
xiv. 600 mm. 145681.00 No.
xv. 700 mm. 274941.00 No.
xvi. 750 mm. 306611.00 No.
xvii. 800 mm. 374019.00 No.
xviii. 900 mm. 490436.00 No.
xix. 1000 mm. 743954.00 No.
xx. 1100 mm. 940356.00 No.
xxi. 1200 mm. 1111757.00 No.
c) Sluice valves – PN – 1.6 – without bypass
i. 50 mm. 4720.00 No.
ii. 65 mm. 5568.00 No.
iii. 80 mm. 6063.00 No.
iv. 100 mm. 8078.00 No.
v. 125 mm. 10093.00 No.
vi. 150 mm. 10704.00 No.
vii. 200 mm. 20839.00 No.
viii. 250 mm. 32222.00 No.
ix. 300 mm. 40918.00 No.
x. 350 mm. 62305.00 No.
xi. 400 mm. 79096.00 No.
xii. 450 mm. 97743.00 No.
xiii. 500 mm. 122665.00 No.
xiv. 600 mm. 181788.00 No.
xv. 700 mm. 275349.00 No.
xvi. 750 mm. 307066.00 No.
xvii. 800 mm. 374574.00 No.
xviii. 900 mm. 491164.00 No.
/ 241 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xix. 1000 mm. 757654.00 No.
xx. 1100 mm. 941752.00 No.
xxi. 1200 mm. 1113446.00 No.
d) Sluice valves – PN – 1.6 – with bypass
i. 50 mm. 5223.00 No.
ii. 65 mm. 5578.00
iii. 80 mm. 6073.00 No.
iv. 100 mm. 8093.00 No.
v. 125 mm. 10108.00 No.
vi. 150 mm. 12105.00 No.
vii. 200 mm. 20869.00 No.
viii. 250 mm. 32252.00 No.
ix. 300 mm. 40948.00 No.
x. 350 mm. 62397.00 No.
xi. 400 mm. 79214.00 No.
xii. 450 mm. 97888.00 No.
xiii. 500 mm. 122847.00 No.
xiv. 600 mm. 182058.00 No.
xv. 700 mm. 275689.00 No.
xvi. 750 mm. 307445.00 No.
xvii. 800 mm. 375037.00 No.
xviii. 900 mm. 491770.00 No.
xix. 1000 mm. 758589.00 No.
xx. 1100 mm. 942914.00 No.
xxi. 1200 mm. 1114821.00 No.
PA-003 Providing double flanged short body pattern type manually
operated Butterfly Valve having body, disc and end cover
in graded cast iron to IS-210 Gr. CF 200 generally
confirming in BS 5155, Synthetic rubber faced ring secured
on disc by retaining ring with stainless steel screw stub
/ 242 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
shaft of stainless steel riding in teflon bearing excluding
C.C. foundation/ structural steel support confirming to IS-
13095-1991.
a) Butterfly Valve - PN – 1 (with bypass)
i. 80 mm. 5227.00 No.
ii. 100 mm. 6682.00 No.
iii. 125 mm. 7620.00 No.
iv. 150 mm. 9850.00 No.
v. 200 mm. 13127.00 No.
vi. 250 mm. 16407.00 No.
vii. 300 mm. 25960.00 No.
viii. 350 mm. 42597.00 No.
ix. 400 mm. 52848.00 No.
x. 450 mm. 61686.00 No.
xi. 500 mm. 66635.00 No.
xii. 600 mm. 78036.00 No.
xiii. 700 mm. 117009.00 No.
xiv. 750 mm. 138572.00 No.
xv. 800 mm. 147586.00 No.
xvi. 900 mm. 189476.00 No.
xvii. 1000 mm. 244269.00 No.
xviii. 1100 mm. 523582.00 No.
xix. 1200 mm. 495449.00 No.
xx. 1400 mm. 755430.00 No.
xxi. 1500 mm. 938659.00 No.
b) Butterfly Valve PN - 1.6 (with bypass)
i. 80 mm. 5800.00 No.
ii. 100 mm. 7593.00 No.
iii. 125 mm. 8385.00 No.
iv. 150 mm. 11327.00 No.
v. 200 mm. 15098.00 No.
/ 243 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
vi. 250 mm. 18869.00 No.
vii. 300 mm. 29854.00 No.
viii. 350 mm. 53246.00 No.
ix. 400 mm. 65228.00 No.
x. 450 mm. 75360.00 No.
xi. 500 mm. 82745.00 No.
xii. 600 mm. 97545.00 No.
xiii. 700 mm. 146261.00 No.
xiv. 750 mm. 173215.00 No.
xv. 800 mm. 184483.00 No.
xvi. 900 mm. 236845.00 No.
xvii. 1000 mm. 305336.00 No.
xviii. 1100 mm. 619313.00 No.
xix. 1200 mm. 654479.00 No.
xx. 1400 mm. 944288.00 No.
xxi. 1500 mm. 1165390.00 No.
PA-004 Lowering, laying and jointing in position following C.I.D.F
Reflux valves, Butterfly valves and Sluice valves including
cost of all labour jointing material, including nut bolts and
giving satisfactory hydraulic testing, etc. complete. (Rate for
all class of valves.)
Note: Only 75% rate is payable till satisfactory hydraulic
testing is given.
i) 50 mm. 723.00 No.
ii) 65 mm. 1088.00 No.
iii) 80 mm. 1512.00 No.
iv) 100 mm. 1975.00 No.
v) 125 mm. 2459.00 No.
vi) 150 mm. 3105.00 No.
vii) 200 mm. 3230.00 No.
viii) 250 mm. 4208.00 No.
ix) 300 mm. 4366.00 No.
/ 244 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
x) 350 mm. 5380.00 No.
xi) 400 mm. 6491.00 No.
xii) 450 mm. 7722.00 No.
xiii) 500 mm. 7997.00 No.
xiv) 600 mm. 8487.00 No.
xv) 700 mm. 9150.00 No.
xvi) 750 mm. 10078.00 No.
xvii) 800 mm. 12010.00 No.
xviii) 900 mm. 12743.00 No.
xix) 1000 mm. 15022.00 No.
xx) 1100 mm. 17347.00 No.
xxi) 1200 mm. 19061.00 No.
PA-005 Providing and supplying Air Valves as per IS-14845-
2000and MJP‟s standard specifications of approved make
and quality of following diameters including all taxes
(Central and local), railway freight, inspection charges,
unloading from railway wagons, loading into truck,
transportation upto departmental stores/site, unloading
and stacking etc. complete.
a) Air Valve Single Ball Flanged/Screwed
Type – PN – 1.
i) 12/15 mm. 569.00 No.
ii) 20 mm. 685.00 No.
iii) 25 mm. 945.00 No.
iv) 32 mm. 1032.00 No.
v) 40 mm. 1136.00 No.
vi) 50 mm. 1248.00 No.
b) Air Valve Single Ball langed/Screwed
Type – PN – 1.6
i) 12/15 mm. 665.00 No.
ii) 20 mm. 945.00 No.
iii) 25 mm. 1136.00 No.
/ 245 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iv) 32 mm. 1225.00 No.
v) 40 mm. 1312.00 No.
vi) 50 mm. 1712.00 No.
PA-006 Providing and supplying Air Valves as per IS-10845 and
MJP‟s standard specifications double orifice type combined
with screw down isolating valve, small orifice elastic ball
resting on a gun meta. Orifice nipple, large orifice vulcanite
ball seating on moulded seat ring, inlet face and drilled,
including all taxes (Central and local), insurance, third party
inspection charges, loading, unloading, transportation upto
departmental stores/site, etc. complete.
a) Air Valve Double Ball Flanged Type-PN- 1
i. 50mm 5248.00 No.
ii. 65mm 6123.00 No.
iii. 80mm 6994.00 No.
b) Air Valve Double Ball Flanged Type-PN-1.6
i. 50mm 6951.00 No.
ii. 65mm 7871.00 No.
iii. 80mm 9740.00 No.
PA-007 Providing and supplying Air valves as per IS-14845-2000
and MJP‟s standard specifications double orifice type
combined with isolating sluice valve, mounted in horizontal
position and operated by wheel gearing, small orifice elastic
ball resting on a gun metal orifice nipple, large orifice
vulcanite ball seating on moulded seat ring, inlet face and
drilled, including all taxes (Central and local), insurance,
third party inspection charges, loading, unloading,
transportation upto departmental storer/site, etc. complete.
a) Air Valve Double Ball Flanged Type – PN – 1.
i. 100 mm. 8844.00 No.
ii. 150 mm. 16118.00 No.
iii. 200 mm. 27106.00 No.
b) Air Valve Double Ball Flanged Type – PN – 1.6
i. 100 mm. 13521.00 No.
/ 246 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ii. 150 mm. 19049.00 No.
iii. 200 mm. 32036.00 No.
PA-008 Providing and supplying Kinetic Double Orifice type Air
Valves as per MJP‟s standard specifications combined with
screw down isolating valve, small orifice elastic ball resting
on a gun metal orifice nipple, large orifice vulcanite ball
seating on moulded seat ring, inlet face and drilled,
including all taxes (Central and local), insurance, third party
charges, loading, unloading, transportation upto
departmental stores/site, etc. complete.
a) Kinetic Air Valve Flanged Type – PN – 1.
i. 40mm 8131.00 No.
ii. 50mm 9191.00 No.
iii. 80mm 10782.00 No.
b) Kinetic Air Valve Flanged Type– PN – 1.6
i. 40mm 10163.00 No.
ii. 50mm 11489.00 No.
iii. 80mm 13477.00 No.
PA-009 Providing and supplying Kinetic Double Orifice type Air
Valves as per MJP‟s standard specifications having small
orifice elastic ball resting on a gun metal orifice nipple,
large orifice vulcanite ball seating on moulded seat ring,
with built-in Kinetic features, isolating sluice valve
mounted in horizontal position and operated by wheel
gearing, inlet face and drilled, including all taxes (Central
and local), insurance, third party inspection charges,
loading, unloading transportation upto departmental
stores/site, etc. complete.
a) Kinetic Air Valve Flanged Type – PN – 1.
i) 100 mm. 11754.00 No.
ii) 150 mm. 16438.00 No.
iii) 200 mm. 25629.00 No.
b) Kinetic Air Valve Flanged Type–PN– 1.6
i) 100 mm. 14693.00 No.
/ 247 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ii) 150 mm. 20547.00 No.
iii) 200 mm. 32036.00 No.
PA-010 Lowering, laying and fixing in proper alignment and
position all types of C.I. air valves as directed by Engineer-
in-charge including cost of conveyance from stores to site
of work, cost of all material and giving satisfactory
hydraulic testing, etc. complete. (for all class of valves).
a) Air Valve Single Ball (PN – 1 and PN-1.6)
i) 15 mm. 116.00 No.
ii) 20 mm. 147.00 No.
iii) 25 mm. 189.00 No.
iv) 32 mm. 209.00 No.
v) 40 mm. 224.00 No.
vi) 50 mm. 243.00 No.
vii) 65 mm. 255.00 No.
viii) 80 mm. 268.00 No.
ix) 100 mm. 299.00 No.
x) 125 mm. 362.00 No.
xi) 150 mm. 402.00 No.
xii) 200 mm. 442.00 No.
b) Air Valve Double Ball (PN – 1 and PN-1.6)
i) 15 mm. 126.00 No.
ii) 20 mm. 156.00 No.
iii) 25 mm. 189.00 No.
iv) 32 mm. 215.00 No.
v) 40 mm. 250.00 No.
vi) 50 mm. 289.00 No.
vii) 65 mm. 333.00 No.
viii) 80 mm. 398.00 No.
ix) 100 mm. 420.00 No.
x) 125 mm. 463.00 No.
/ 248 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xi) 150 mm. 633.00 No.
xii) 200 mm. 697.00 No.
c) Kinetic Air Valve (PN – 1 and PN-1.6)
i) 40 mm. 287.00 No.
ii) 50 mm. 331.00 No.
iii) 65 mm. 362.00 No.
iv) 80 mm. 398.00 No.
v) 100 mm. 438.00 No.
vi) 125 mm. 478.00 No.
vii) 150 mm. 685.00 No.
viii) 200 mm. 747.00 No.
PA-011 Providing erecting Cast Steel / Spheroidal Graphite (S.G.)
Iron D/F Sluice Valves / Butterfly Valves with jointing to
pipe work (including all hardware and packing) water works
quality, having non-rising spindle with hand wheel and
without bypass arrangement, spindle of stainless of steel as
per requirement, excluding C.C. foundation / Structural
steel support.
For Rating Class 150 (Working Pressure 20 Kg/Cm2
and Test Pressure 30 Kg/cm2)
a) Sluice Valves
i) 80 mm. 13557.00 No.
ii) 100 mm. 18075.00 No.
iii) 150 mm. 27113.00 No.
iv) 200 mm. 42285.00 No.
v) 250 mm. 60852.00 No.
vi) 300 mm. 77860.00 No.
vii) 350 mm. 103813.00 No.
viii) 400 mm. 173235.00 No.
ix) 450 mm. 236360.00 No.
x) 500 mm. 278070.00 No.
xi) 600 mm. 317463.00 No.
/ 249 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
b) Butterfly Valves
i) 300 mm. 97905.00 No.
ii) 350 mm. 104372.00 No.
iii) 400 mm. 117232.00 No.
iv) 450 mm. 124888.00 No.
v) 500 mm. 144567.00 No.
vi) 600 mm. 162693.00 No.
PA-012 Providing erecting Cast Steel D/F Sluice Valves / Butterfly
Valves with jointing to pipe work (including all hardware
and packing) water works quality having non-rising spindle
with hand wheel and without bypass arrangement, spindle
of stainless steel as per requirement, excluding C.C.
foundation / structural steel support.
For Rating Class 300 (Working Pressure 52 Kg/Cm2 and
Test Pressure 78 Kg/Cm2)
a) Sluice Valves
i) 80 mm. 14593.00 No.
ii) 100 mm. 23040.00 No.
iii) 150 mm. 35128.00 No.
iv) 200 mm. 55091.00 No.
v) 250 mm. 59470.00 No.
vi) 300 mm. 100253.00 No.
vii) 350 mm. 169079.00 No.
viii) 400 mm. 246658.00 No.
ix) 450 mm. 296978.00 No.
x) 500 mm. 462665.00 No.
xi) 600 mm. 699305.00 No.
b) Butterfly Valves
i) 300 mm. 119444.00 No.
ii) 350 mm. 127335.00 No.
iii) 400 mm. 143023.00 No.
iv) 450 mm. 152363.00 No.
/ 250 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
v) 500 mm. 176373.00 No.
vi) 600 mm. 198486.00 No.
PA-013 Providing erecting Cast Steel / Spheroidal Graphite (S.G.)
Iron D/F Reflux Valves Single Door with jointing to pipe
work (including all hardware and packing) water works
quality with jointing to pipe without bypass arrangement,
with gunmental seats excluding C.C. foundation /
structural steel support.
For Rating Class 150 (Working Pressure 20 Kg/Cm2
and Test Pressure 30 Kg/cm2)
i) 80 mm. Dia 9460.00 No.
ii) 100 mm. Dia 14486.00 No.
iii) 150 mm. Dia 24540.00 No.
iv) 200 mm. Dia 46659.00 No.
v) 250 mm. Dia 81244.00 No.
vi) 300 mm. Dia 107035.00 No.
PA-014 Providing erecting Cast Steel / D/F Reflux Valves Single
Door with jointing to pipe work (including all hardware
and packing) water works quality with jointing to pipe
without bypass arrangement, with gunmetal seat excluding
C.C. foundation / structural steel support.
For Rating Class 300 (Working Pressure 52 Kg/Cm2
and Test Pressure 78 Kg/cm2)
i) 80 mm. Dia 14094.00 No.
ii) 100 mm. Dia 19866.00 No.
iii) 150 mm. Dia 33038.00 No.
iv) 200 mm. Dia 58529.00 No.
v) 250 mm. Dia 105963.00 No.
vi) 300 mm. Dia 129017.00 No.
PA-015 Providing erecting Kinetic Double Orifice Cast Steel Air
Valves with an isolating Sluice Valve mounted in horizontal
position operated by wheel gear suitable for working
pressure of Class 150 rating (20 Kg/cm2)
i) 80 mm. Dia 27330.00 No.
/ 251 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ii) 100 mm. Dia 38096.00 No.
iii) 150 mm. Dia 73001.00 No.
iv) 200 mm. Dia 94363.00 No.
PA-016 Providing erecting Kinetic Double Orifice Cast Steel Air
Valves with an isolating Sluice Valve mounted in horizontal
position operated by wheel gear suitable for working
pressure of Class 300 rating (52 kg/cm2)
i) 80 mm. Dia 33296.00 No.
ii) 100 mm. Dia 38062.00 No.
iii) 150 mm. Dia 88945.00 No.
iv) 200 mm. Dia 107366.00 No.
PA-017 Providing and Fixing in position air valve shaft including
providing and fixing GI Medium Class or 6 mm thick M.S.
Pipe Shaft 2.70 M long over branch flange of air valve tee,
providing PCC block of M-150 concrete 150mm thick
around the air valve tee including encasing of vertical shaft
in PCC M-150 as shown in type design together with
providing and making flanged shown in type design
together with providing and making flanged joints
wherever required and fixing of air valve over the shaft
excluding cost of air valve and branch flanged air valve tee,
etc. complete as per type design and as directed by
Engineer-in-Charge for following diameters of pipe lines.
A) Foundation on Murum and Harder Strata
i) Upto 150 mm dia pipe line 4868.00 No.
ii) 200 to 400 mm dia pipe line 5703.00 No.
iii) 450 to 900 mm dia pipe line 11597.00 No.
iv) 1000 to 1200 mm dia pipe line 14564.00 No.
B) Foundation in B.C. Soil or Any Other Soil
i) Upto 150 mm dia pipe line 5767.00 No.
ii) 200 to 400 mm dia pipe line 6956.00 No.
iii) 450 to 900 mm dia pipe line 13247.00 No.
iv) 1000 to 1200 mm dia pipe line 16612.00 No.
/ 252 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
PA-018 Providing and supplying C.I.D/F angle type spring loaded
pressure relief valves of approved make and quality
including all taxes (Central and local), octroi, inspection
charges, transportation to departmental stores, etc.
complete.
a) Pressure relief valves Type – PN – 1
i) 25 mm. 3814.00 No.
ii) 40 mm. 4970.00 No.
iii) 50 mm. 6437.00 No.
iv) 80 mm. 9763.00 No.
v) 100 mm. 13667.00 No.
vi) 125 mm. 18634.00 No.
vii) 150 mm. 21293.00 No.
viii) 200 mm. 47022.00 No.
ix) 250 mm. 66096.00 No.
x) 300 mm. 87168.00 No.
b) Pressure relief valve Type - TN - 1.6
i) 25 mm. 4769.00 No.
ii) 40 mm. 6210.00 No.
iii) 50 mm. 7039.00 No.
iv) 80 mm. 11300.00 No.
v) 100 mm. 15513.00 No.
vi) 125 mm. 23287.00 No.
vii) 150 mm. 26616.00 No.
viii) 200 mm. 58773.00 No.
ix) 250 mm. 82619.00 No.
x) 300 mm. 109213.00 No.
PA-019 Lowering, laying and fixing in proper alignment and
position all types of C.I.D./F angle type spring loaded
pressure relief valves including all cost of all material,
labour, cost of conveyance from stores to site of work &
/ 253 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
giving satisfactory hydraulic testing, etc. complete. (For all
class of valves.)
i) 25 mm. 216.00 No.
ii) 40 mm. 287.00 No.
iii) 50 mm. 332.00 No.
iv) 80 mm. 397.00 No.
v) 100 mm. 436.00 No.
vi) 125 mm. 485.00 No.
vii) 150 mm. 685.00 No.
viii) 200 mm. 748.00 No.
ix) 250 mm. 873.00 No.
x) 300 mm. 996.00 No.
PA-020 Cutting and champhering of C.I. pipes of following
diameters including cost of all materials and labour
involved, etc. complete as directed by Engineer-in-charge
(for all class of pipes).
i) 80 mm. 35.00 One Cut
ii) 100 mm. 41.00 One Cut
iii) 150 mm. 62.00 One Cut
iv) 200 mm. 80.00 One Cut
v) 250 mm. 114.00 One Cut
vi) 300 mm. 135.00 One Cut
vii) 350 mm. 138.00 One Cut
viii) 400 mm. 175.00 One Cut
ix) 450 mm. 204.00 One Cut
x) 500 mm. 244.00 One Cut
xi) 600 mm. 297.00 One Cut
xii) 700 mm. 350.00 One Cut
xiii) 750 mm. 418.00 One Cut
xiv) 800 mm. 457.00 One Cut
xv) 900 mm. 503.00 One Cut
/ 254 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xvi) 1000 mm. 547.00 One Cut
b)
i) 80 mm. 12.00 No.
ii) 100 mm. 14.00 No.
iii) 150 mm. 22.00 No.
iv) 200 mm. 23.00 No.
v) 250 mm. 34.00 No.
vi) 300 mm. 46.00 No.
vii) 350 mm. 57.00 No.
viii) 400 mm. 64.00 No.
ix) 450 mm. 69.00 No.
x) 500 mm. 79.00 No.
xi) 600 mm. 90.00 No.
PA-021 Providing and supplying I.S.I. mark rubber gasket suitable
for C.I. or D.I. pipe of all class for tyton joints including all
taxes (Central and local) inspection charges, transportation
to departmental stores/site, etc. complete.
a) S.B.R. Gaskets for C.I. / D.I. Pipes
i) 80 mm. 39.00 No.
ii) 100 mm. 43.00 No.
iii) 150 mm. 60.00 No.
iv) 200 mm. 102.00 No.
v) 250 mm. 133.00 No.
vi) 300 mm. 187.00 No.
vii) 350 mm. 214.00 No.
viii) 400 mm. 298.00 No.
ix) 450 mm. 325.00 No.
x) 500 mm. 444.00 No.
xi) 600 mm. 615.00 No.
xii) 700 mm. 1095.00 No.
xiii) 750 mm. 1138.00 No.
/ 255 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
xiv) 800 mm. 1179.00 No.
xv) 900 mm. 1705.00 No.
xvi) 1000 mm. 2190.00 No.
b) Sealing 'O' Rings of SBR (For CID Joints)
i) 80 mm. 45.00 Set
ii) 100 mm. 53.00 Set
iii) 125 mm. 64.00 Set
iv) 150 mm. 75.00 Set
c) Flat Flanged Gaskets moulded out of SBR (For
Flanged Joints)
i) 80 mm. 82.00 No.
ii) 100 mm. 109.00 No.
iii) 125 mm. 129.00 No.
iv) 150 mm. 177.00 No.
v) 200 mm. 219.00 No.
vi) 250 mm. 307.00 No.
vii) 300 mm. 326.00 No.
viii) 350 mm. 393.00 No.
ix) 400 mm. 487.00 No.
x) 450 mm. 532.00 No.
xi) 500 mm. 623.00 No.
xii) 600 mm. 838.00 No.
d) Providing Rubber Gasket - EPDM Gaskets for
C.I./D.I. Pipes
i) 80 mm. 46.00 No.
ii) 100 mm. 48.00 No.
iii) 150 mm. 70.00 No.
iv) 200 mm. 117.00 No.
v) 250 mm. 160.00 No.
vi) 300 mm. 212.00 No.
vii) 350 mm. 247.00 No.
/ 256 /
CIDCO SCHEDULE OF RATES : 2015-2016
Pipe Appurtenances…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
viii) 400 mm. 338.00 No.
ix) 450 mm. 378.00 No.
x) 500 mm. 500.00 No.
xi) 600 mm. 703.00 No.
xii) 700 mm. 1320.00 No.
xiii) 750 mm. 1383.00 No.
xiv) 800 mm. 1688.00 No.
xv) 900 mm. 2178.00 No.
xvi) 1000 mm. 2530.00 No.
PA-022 Providing and fixing in position and jointing high
performance C.I. Air valves for water combination type
(Kinetic air valve along with automatic air valves) double
ball, double orifice with stainless steel ball, tamper proof air
vents rolling seal mechanism for air release and anti
vacuum application designed for 16 kg. per sq.cm. working
pressure andtested for 20 kg. per sq.cm. pressure. (Rate to
include cost of gaskets, bolt, nut and any other materials
required for jointing and its transportation etc. including all
taxes and duties except octroi).
1. C.I. ARV FLFF PN 16 50 mm Dia. 8562.00 No.
2. C.I. ARV FLFF PN 16 80 mm Dia. 11881.00 No.
3. C.I. ARV FLFF PN 16 100 mm Dia. 19103.00 No.
4. C.I. ARV FLFF PN 16 150 mm Dia. 31975.00 No.
5. C.I. ARV FLFF PN 16 200 mm Dia. 38732.00 No.
/ 257 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 258 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 259 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 260 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 261 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 262 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 263 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 264 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 265 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. PIPES
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
MSP-001 Manufacturing, providing and supplying spirally
welded/ERW/ SAW/ fabricated M.S. pipes (Commercial
Quality) including procurements of plates, gas cutting to
required size rolling, tack welding assembling in suitable
lengths to form pipes, welding on automatic welding
machine and forming „V‟ edge on both ends of pipes
including all taxes (Central and local), railway freight,
insurance unloading from railway wagon, loading into
truck, transport top stores/site, unloading, stacking, etc.
complete as per IS – 3589 and IS – 5504 as applicable as
per specifications (No negative tolerance in thickness is
permissible).
a) Dia of Pipe: 219.10 mm (O.D.)
Thickness of pipe: (With Excise Duty)
i) 4.8 mm 1298.00 Rmt.
ii) 5.6 mm 1509.00 Rmt.
iii) 6.4 mm 1718.00 Rmt.
iv) 7.00 mm 1873.00 Rmt.
v) 7.90 mm 2105.00 Rmt.
vi) 8.20 mm 2182.00 Rmt.
vii) 8.70 mm 2309.00 Rmt.
viii) 9.50 mm 2512.00 Rmt.
b) Dia of Pipe: 273.10 mm (O.D.)
Thickness of pipe:
i) 4.8 mm 1625.00 Rmt.
ii) 5.6 mm 1890.00 Rmt.
iii) 6.4 mm 2153.00 Rmt.
iv) 7.2 mm 2416.00 Rmt.
v) 7.8 mm 2610.00 Rmt.
vi) 8.7 mm 2902.00 Rmt.
vii) 9.3 mm 3095.00 Rmt.
/ 266 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
c) Dia of Pipe: 323.90 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 2249.00 Rmt.
ii) 6.4 mm 2564.00 Rmt.
iii) 7.1 mm 2838.00 Rmt.
iv) 7.9 mm 3150.00 Rmt.
v) 8.4 mm 3344.00 Rmt.
vi) 8.7 mm 3460.00 Rmt.
vii) 9.5 mm 3768.00 Rmt.
d) Dia of Pipe: 355.7 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 2473.00 Rmt.
ii) 6.4 mm 2819.00 Rmt.
iii) 7.1 mm 3121.00 Rmt.
iv) 7.9 mm 3465.00 Rmt.
v) 8.7 mm 3808.00 Rmt.
vi) 9.5 mm 4148.00 Rmt.
e) Dia of Pipe: 406.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 2828.00 Rmt.
ii) 6.4 mm 3227.00 Rmt.
iii) 7.1 mm 3573.00 Rmt.
iv) 7.9 mm 3968.00 Rmt.
v) 8.7 mm 4361.00 Rmt.
vi) 9.5 mm 4752.00 Rmt.
vii) 10.00 mm. 4996.00 Rmt.
f) Dia of Pipe: 457.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 3188.00 Rmt.
ii) 6.4 mm 3638.00 Rmt.
iii) 7.1 mm 4030.00 Rmt.
/ 267 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iv) 7.9 mm 4477.00 Rmt.
v) 8.7 mm 4920.00 Rmt.
vi) 9.5 mm 5364.00 Rmt.
vii) 10.00 mm. 5640.00 Rmt.
g) Dia of Pipe: 508.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 3550.00 Rmt.
ii) 6.4 mm 4050.00 Rmt.
iii) 7.1 mm 4486.00 Rmt.
iv) 7.9 mm 4984.00 Rmt.
v) 8.7 mm 5480.00 Rmt.
vi) 9.5 mm 5976.00 Rmt.
vii) 10.00 mm. 6283.00 Rmt.
h) Dia of Pipe: 559.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 3910.00 Rmt.
ii) 6.4 mm 4461.00 Rmt.
iii) 7.1 mm 4944.00 Rmt.
iv) 7.9 mm 5493.00 Rmt.
v) 8.7 mm 6039.00 Rmt.
vi) 9.5 mm 6586.00 Rmt.
vii) 10.00 mm. 6926.00 Rmt.
i) Dia of Pipe: 610.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 4270.00 Rmt.
ii) 6.4 mm 4874.00 Rmt.
iii) 7.1 mm 5400.00 Rmt.
iv) 7.9 mm 6000.00 Rmt.
v) 8.7 mm 6599.00 Rmt.
vi) 9.5 mm 7198.00 Rmt.
vii) 10.0 mm 7570.00 Rmt.
/ 268 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
viii) 12.00 mm. 9053.00 Rmt.
j) Dia of Pipe: 660.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 4623.00 Rmt.
ii) 6.4 mm 5278.00 Rmt.
iii) 7.1 mm 5849.00 Rmt.
iv) 7.9 mm 6499.00 Rmt.
v) 8.7 mm 7149.00 Rmt.
vi) 9.5 mm 7796.00 Rmt.
vii) 10.0 mm 8201.00 Rmt.
k) Dia of Pipe: 711.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 4984.00 Rmt.
ii) 6.4 mm 5689.00 Rmt.
iii) 7.1 mm 6304.00 Rmt.
iv) 7.9 mm 7007.00 Rmt.
v) 8.7 mm 7709.00 Rmt.
vi) 9.5 mm 8408.00 Rmt.
vii) 10.0 mm 8844.00 Rmt.
viii) 12.00 mm. 10582.00 Rmt.
l) Dia of Pipe: 762.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 5345.00 Rmt.
ii) 6.4 mm 6101.00 Rmt.
iii) 7.1 mm 6762.00 Rmt.
iv) 7.9 mm 7516.00 Rmt.
v) 8.7 mm 8268.00 Rmt.
vi) 9.5 mm 9019.00 Rmt.
vii) 10.0 mm 9487.00 Rmt.
m) Dia of Pipe: 813.00 mm (O.D.)
/ 269 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
Thickness of pipe:
i) 5.6 mm 5704.00 Rmt.
ii) 6.4 mm 6513.00 Rmt.
iii) 7.1 mm 7218.00 Rmt.
iv) 7.9 mm 8024.00 Rmt.
v) 8.7 mm 8829.00 Rmt.
vi) 9.5 mm 9631.00 Rmt.
vii) 10.0 mm 10131.00 Rmt.
viii) 12.00 mm. 12126.00 Rmt.
n) Dia of Pipe: 864.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 6065.00 Rmt.
ii) 6.4 mm 6924.00 Rmt.
iii) 7.1 mm 7676.00 Rmt.
iv) 7.9 mm 8532.00 Rmt.
v) 8.7 mm 9388.00 Rmt.
vi) 9.5 mm 10241.00 Rmt.
vii) 10.0 mm 10774.00 Rmt.
o) Dia of Pipe: 914.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 6418.00 Rmt.
ii) 6.4 mm 7329.00 Rmt.
iii) 7.1 mm 8124.00 Rmt.
iv) 7.9 mm 9030.00 Rmt.
v) 8.7 mm 9937.00 Rmt.
vi) 9.5 mm 10841.00 Rmt.
vii) 10.0 mm 11405.00 Rmt.
p) Dia of Pipe: 965.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 6779.00 Rmt.
ii) 6.4 mm 7741.00 Rmt.
/ 270 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iii) 7.1 mm 8581.00 Rmt.
iv) 7.9 mm 9540.00 Rmt.
v) 8.7 mm 10496.00 Rmt.
vi) 9.5 mm 11452.00 Rmt.
vii) 10.0 mm 12049.00 Rmt.
q) Dia pf Pipe: 1016.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 7138.00 Rmt.
ii) 6.4 mm 8152.00 Rmt.
iii) 7.1 mm 9037.00 Rmt.
iv) 7.9 mm 10048.00 Rmt.
v) 8.7 mm 11057.00 Rmt.
vi) 9.5 mm 12064.00 Rmt.
vii) 10.0 mm 12692.00 Rmt.
viii) 12.00 mm. 15201.00 Rmt.
r) Dia of Pipe: 1067.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 7499.00 Rmt.
ii) 6.4 mm 8564.00 Rmt.
iii) 7.1 mm 9495.00 Rmt.
iv) 7.9 mm 10556.00 Rmt.
v) 8.7 mm 11616.00 Rmt.
vi) 9.5 mm 12674.00 Rmt.
vii) 10.0 mm 13336.00 Rmt.
s) Dia of Pipe: 1118.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 7860.00 Rmt.
ii) 6.4 mm 8975.00 Rmt.
iii) 7.1 mm 9950.00 Rmt.
iv) 7.9 mm 11064.00 Rmt.
v) 8.7 mm 12176.00 Rmt.
/ 271 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
vi) 9.5 mm 13286.00 Rmt.
vii) 10.0 mm 13979.00 Rmt.
t) Dia of Pipe: 1168.00 mm (O.D.)
Thickness of pipe:
i) 5.6 mm 8212.00 Rmt.
ii) 6.4 mm 9379.00 Rmt.
iii) 7.1 mm 10399.00 Rmt.
iv) 7.9 mm 11563.00 Rmt.
v) 8.7 mm 12725.00 Rmt.
vi) 9.5 mm 13885.00 Rmt.
vii) 10.0 mm 14610.00 Rmt.
u) Dia of Pipe: 1219.00 mm (O.D.)
Thickness of pipe:
i) 6.4 mm 9791.00 Rmt.
ii) 7.1 mm 10856.00 Rmt.
iii) 7.9 mm 12071.00 Rmt.
iv) 8.7 mm 13285.00 Rmt.
v) 9.5 mm 14497.00 Rmt.
vi) 10.00 mm. 15253.00 Rmt.
vii) 12.00 mm. 18273.00 Rmt.
v) Dia of Pipe: 1296.00 mm (O.D.)
Thickness of pipe:
i) 9.50 mm 15420.00 Rmt.
ii) 9.98 mm 16192.00 Rmt.
iii) 10.00 mm 16224.00 Rmt.
w) Dia of Pipe: 1321.00 mm (O.D.)
Thickness of pipe:
i) 6.4 mm 10614.00 Rmt.
ii) 7.1 mm 11769.00 Rmt.
iii) 7.9 mm 13087.00 Rmt.
iv) 8.7 mm 14404.00 Rmt.
/ 272 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
v) 9.5 mm 15718.00 Rmt.
vi) 10.00 mm. 16540.00 Rmt.
x) Dia of Pipe: 1422.00 mm (O.D.)
Thickness of pipe:
i) 7.1 mm 12674.00 Rmt.
ii) 7.9 mm 14094.00 Rmt.
iii) 8.7 mm 15513.00 Rmt.
iv) 9.5 mm 16929.00 Rmt.
v) 10.00 mm. 17813.00 Rmt.
vi) 12.00 mm. 21347.00 Rmt.
y) Dia of Pipe: 1473.00 mm (O.D.)
Thickness of pipe:
i) 9.5 mm 17541.00 Rmt.
ii) 9.98 mm. 18421.00 Rmt.
z) Dia of Pipe: 1524.00 mm (O.D.)
Thickness of pipe:
i) 7.1 mm 13588.00 Rmt.
ii) 7.9 mm 15110.00 Rmt.
iii) 8.7 mm 16632.00 Rmt.
iv) 9.5 mm 18152.00 Rmt.
v) 10.00 mm. 19101.00 Rmt.
vi) 11.90 mm 22702.00 Rmt.
vii) 12.00 mm. 22891.00 Rmt.
aa) Dia of Pipe: 1550.00 mm (O.D.)
Thickness of pipe:
i) 10.00 mm. 19429.00 Rmt.
ii) 11.00 mm. 21358.00 Rmt.
ab) Dia of Pipe: 1576.00 mm (O.D.)
Thickness of pipe:
i) 9.5 mm 18776.00 Rmt.
ii) 10.00 mm 19757.00 Rmt.
/ 273 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ac) Dia of Pipe: 1626.00 mm (O.D.)
Thickness of pipe:
i) 7.1 mm 14501.00 Rmt.
ii) 7.9 mm 16127.00 Rmt.
iii) 8.7 mm 17752.00 Rmt.
iv) 9.5 mm 19374.00 Rmt.
v) 10.00 mm. 20387.00 Rmt.
vi) 12.00 mm. 24436.00 Rmt.
ad) Dia of Pipe: 1650.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 16366.00 Rmt.
ii) 8.7 mm 18015.00 Rmt.
iii) 9.5 mm 19662.00 Rmt.
iv) 10.00 mm. 20691.00 Rmt.
v) 12.00 mm. 24799.00 Rmt.
ae) Dia of Pipe: 1700.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 16865.00 Rmt.
ii) 8.7 mm 18564.00 Rmt.
iii) 9.5 mm 20261.00 Rmt.
iv) 10.00 mm. 21321.00 Rmt.
v) 12.00 mm. 25555.00 Rmt.
af) Dia of Pipe: 1750.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 17363.00 Rmt.
ii) 8.7 mm 19112.00 Rmt.
iii) 9.5 mm 20861.00 Rmt.
iv) 10.00 mm. 21952.00 Rmt.
v) 12.00 mm. 26313.00 Rmt.
ag) Dia of Pipe: 1800.00 mm (O.D.)
/ 274 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
Thickness of pipe:
i) 7.9 mm 17861.00 Rmt.
ii) 8.7 mm 19661.00 Rmt.
iii) 9.5 mm 21460.00 Rmt.
iv) 10.00 mm. 22584.00 Rmt.
v) 12.00 mm. 27069.00 Rmt.
ah) Dia of Pipe: 1850.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 18359.00 Rmt.
ii) 8.7 mm 20210.00 Rmt.
iii) 9.5 mm 22058.00 Rmt.
iv) 10.00 mm. 23214.00 Rmt.
v) 12.00 mm. 27826.00 Rmt.
ai) Dia of Pipe: 1900.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 18858.00 Rmt.
ii) 8.7 mm 20759.00 Rmt.
iii) 9.5 mm 22659.00 Rmt.
iv) 10.00 mm. 23845.00 Rmt.
v) 12.00 mm. 28583.00 Rmt.
aj) Dia of Pipe: 1950.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 19357.00 Rmt.
ii) 8.7 mm 21308.00 Rmt.
iii) 9.5 mm 23258.00 Rmt.
iv) 10.00 mm. 24476.00 Rmt.
v) 12.00 mm. 29339.00 Rmt.
ak) Dia of Pipe: 2000.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 19855.00 Rmt.
ii) 8.7 mm 21856.00 Rmt.
/ 275 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iii) 9.5 mm 23857.00 Rmt.
iv) 10.00 mm. 25106.00 Rmt.
v) 12.00 mm. 30097.00 Rmt.
al) Dia of Pipe: 2050.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 20354.00 Rmt.
ii) 8.7 mm 22405.00 Rmt.
iii) 9.5 mm 24455.00 Rmt.
iv) 10.00 mm. 25737.00 Rmt.
v) 12.00 mm. 30854.00 Rmt.
am) Dia of Pipe: 2100.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 20851.00 Rmt.
ii) 8.7 mm 22954.00 Rmt.
iii) 9.5 mm 25055.00 Rmt.
iv) 10.00 mm. 26368.00 Rmt.
v) 12.00 mm. 31612.00 Rmt.
an) Dia of Pipe: 2150.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 21349.00 Rmt.
ii) 8.7 mm 23503.00 Rmt.
iii) 9.5 mm 25654.00 Rmt.
iv) 10.00 mm. 26999.00 Rmt.
v) 12.00 mm. 32368.00 Rmt.
ao) Dia of Pipe: 2200.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 21848.00 Rmt.
ii) 8.7 mm 24052.00 Rmt.
iii) 9.5 mm 26254.00 Rmt.
iv) 10.00 mm. 27629.00 Rmt.
v) 12.00 mm. 33125.00 Rmt.
/ 276 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ap) Dia of Pipe: 2250.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 22347.00 Rmt.
ii) 8.7 mm 24601.00 Rmt.
iii) 9.5 mm 26853.00 Rmt.
iv) 10.00 mm. 28260.00 Rmt.
v) 12.00 mm. 33882.00 Rmt.
aq) Dia of Pipe: 2300.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 22845.00 Rmt.
ii) 8.7 mm 25149.00 Rmt.
iii) 9.5 mm 27452.00 Rmt.
iv) 10.00 mm. 28892.00 Rmt.
v) 12.00 mm. 34638.00 Rmt.
ar) Dia of Pipe: 2350.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 23343.00 Rmt.
ii) 8.7 mm 25698.00 Rmt.
iii) 9.5 mm 28052.00 Rmt.
iv) 10.00 mm. 29521.00 Rmt.
v) 12.00 mm. 35397.00 Rmt.
as) Dia of Pipe: 2400.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 23842.00 Rmt.
ii) 8.7 mm 26247.00 Rmt.
iii) 9.5 mm 28651.00 Rmt.
iv) 10.00 mm. 30153.00 Rmt.
v) 12.00 mm. 36153.00 Rmt.
at) Dia of Pipe: 2450.00 mm (O.D.)
Thickness of pipe:
/ 277 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
i) 7.9 mm 24340.00 Rmt.
ii) 8.7 mm 26796.00 Rmt.
iii) 9.5 mm 29251.00 Rmt.
iv) 10.00 mm. 30783.00 Rmt.
v) 12.00 mm. 36910.00 Rmt.
au) Dia of Pipe: 2500.00 mm (O.D.)
Thickness of pipe:
i) 7.9 mm 24839.00 Rmt.
ii) 8.7 mm 27345.00 Rmt.
iii) 9.5 mm 29849.00 Rmt.
iv) 10.00 mm. 31415.00 Rmt.
v) 12.00 mm. 37667.00 Rmt.
vi) 16.00 mm. 50142.00 Rmt.
MSP-002 Manufacturing, providing and supplying spirally
welded/ERW/ SAW/ fabricated M.S. pipes (Commercial
Quality) including procurements of plates, gas cutting to
required size rolling, tack welding assembling in suitable
lengths to form pipes, welding on automatic welding
machine and forming „V‟ edge on both ends of pipes
including all taxes (Central and local), railway freight,
insurance unloading from railway wagon, loading into
truck, transport top stores/site, unloading, stacking, etc.
complete as per IS – 3589 and IS – 5504 as applicable as
per specifications (No negative tolerance in thickness is
permissible).
a) Dia of Pipe: 200.00 mm (I.D.) (with Excise Duty)
Thickness of pipe:
i) 5.00 mm 1294.00 Rmt.
ii) 6.00 mm 1555.00 Rmt.
iii) 7.00 mm 1828.00 Rmt.
iv) 8.00 mm. 2100.00 Rmt.
v) 9.00 mm. 2373.00 Rmt.
vi) 10.00 mm. 2649.00 Rmt.
/ 278 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
b) Dia of Pipe: 250.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 1608.00 Rmt.
ii) 6.00 mm 1938.00 Rmt.
iii) 7.00 mm 2270.00 Rmt.
iv) 8.00 mm. 2604.00 Rmt.
v) 9.00 mm. 2941.00 Rmt.
vi) 10.00 mm. 3280.00 Rmt.
c) Dia of Pipe: 300.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 1924.00 Rmt.
ii) 6.00 mm 2316.00 Rmt.
iii) 7.00 mm 2712.00 Rmt.
iv) 8.00 mm. 3108.00 Rmt.
v) 9.00 mm. 3510.00 Rmt.
vi) 10.00 mm. 3911.00 Rmt.
d) Dia of Pipe: 350.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 2239.00 Rmt.
ii) 6.00 mm 2695.00 Rmt.
iii) 7.00 mm 3153.00 Rmt.
iv) 8.00 mm. 3613.00 Rmt.
v) 9.00 mm. 4076.00 Rmt.
vi) 10.00 mm. 4542.00 Rmt.
e) Dia of Pipe: 400.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 2555.00 Rmt.
ii) 6.00 mm 3074.00 Rmt.
iii) 7.00 mm 3595.00 Rmt.
iv) 8.00 mm. 4118.00 Rmt.
v) 9.00 mm. 4644.00 Rmt.
/ 279 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
vi) 10.00 mm. 5172.00 Rmt.
f) Dia of Pipe: 450.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 2870.00 Rmt.
ii) 6.00 mm 3451.00 Rmt.
iii) 7.00 mm 4036.00 Rmt.
iv) 8.00 mm. 4623.00 Rmt.
v) 9.00 mm. 5211.00 Rmt.
vi) 10.00 mm. 5804.00 Rmt.
g) Dia of Pipe: 500.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 3186.00 Rmt.
ii) 6.00 mm 3830.00 Rmt.
iii) 7.00 mm 4478.00 Rmt.
iv) 8.00 mm. 5127.00 Rmt.
v) 9.00 mm. 5780.00 Rmt.
vi) 10.00 mm. 6435.00 Rmt.
h) Dia of Pipe: 550.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 3501.00 Rmt.
ii) 6.00 mm 4208.00 Rmt.
iii) 7.00 mm 4919.00 Rmt.
iv) 8.00 mm. 5632.00 Rmt.
v) 9.00 mm. 6348.00 Rmt.
vi) 10.00 mm. 7066.00 Rmt.
i) Dia of Pipe: 600.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 3817.00 Rmt.
ii) 6.00 mm 4587.00 Rmt.
iii) 7.00 mm 5361.00 Rmt.
iv) 8.00 mm 6137.00 Rmt.
/ 280 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
v) 9.00 mm. 6915.00 Rmt.
vi) 10.00 mm. 7696.00 Rmt.
vii) 12.00 mm. 9266.00 Rmt.
j) Dia of Pipe: 650.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 4133.00 Rmt.
ii) 6.00 mm 4965.00 Rmt.
iii) 7.00 mm 5802.00 Rmt.
iv) 8.00 mm 6641.00 Rmt.
v) 9.00 mm. 7483.00 Rmt.
vi) 10.00 mm. 8327.00 Rmt.
vii) 12.00 mm. 10023.00 Rmt.
k) Dia of Pipe:700.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 4447.00 Rmt.
ii) 6.00 mm 5345.00 Rmt.
iii) 7.00 mm 6244.00 Rmt.
iv) 8.00 mm 7147.00 Rmt.
v) 9.00 mm. 8050.00 Rmt.
vi) 10.00 mm. 8957.00 Rmt.
vii) 12.00 mm. 10780.00 Rmt.
l) Dia of Pipe:750.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 4763.00 Rmt.
ii) 6.00 mm 5724.00 Rmt.
iii) 7.00 mm 6686.00 Rmt.
iv) 8.00 mm 7651.00 Rmt.
v) 9.00 mm. 8619.00 Rmt.
vi) 10.00 mm. 9589.00 Rmt.
vii) 12.00 mm. 11536.00 Rmt.
m) Dia of Pipe:800.00 mm (I.D.)
/ 281 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
Thickness of pipe:
i) 5.00 mm 5078.00 Rmt.
ii) 6.00 mm 6102.00 Rmt.
iii) 7.00 mm 7126.00 Rmt.
iv) 8.00 mm 8156.00 Rmt.
v) 9.00 mm. 9186.00 Rmt.
vi) 10.00 mm. 10220.00 Rmt.
vii) 12.00 mm. 12294.00 Rmt.
n) Dia of Pipe:850.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 5394.00 Rmt.
ii) 6.00 mm 6480.00 Rmt.
iii) 7.00 mm 7569.00 Rmt.
iv) 8.00 mm 8661.00 Rmt.
v) 9.00 mm. 9754.00 Rmt.
vi) 10.00 mm. 10850.00 Rmt.
vii) 12.00 mm. 13050.00 Rmt.
o) Dia of Pipe:900.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 5709.00 Rmt.
ii) 6.00 mm 6859.00 Rmt.
iii) 7.00 mm 8010.00 Rmt.
iv) 8.00 mm 9165.00 Rmt.
v) 9.00 mm. 10322.00 Rmt.
vi) 10.00 mm. 11482.00 Rmt.
vii) 12.00 mm. 13807.00 Rmt.
p) Dia of Pipe:950.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 6025.00 Rmt.
ii) 6.00 mm 7238.00 Rmt.
iii) 7.00 mm 8452.00 Rmt.
/ 282 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iv) 8.00 mm 9670.00 Rmt.
v) 9.00 mm. 10889.00 Rmt.
vi) 10.00 mm. 12112.00 Rmt.
vii) 12.00 mm. 14565.00 Rmt.
q) Dia of Pipe:1000.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 6339.00 Rmt.
ii) 6.00 mm 7615.00 Rmt.
iii) 7.00 mm 8894.00 Rmt.
iv) 8.00 mm 10175.00 Rmt.
v) 9.00 mm. 11457.00 Rmt.
vi) 10.00 mm. 12743.00 Rmt.
vii) 12.00 mm. 15322.00 Rmt.
r) Dia of Pipe:1050.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 6656.00 Rmt.
ii) 6.00 mm 7994.00 Rmt.
iii) 7.00 mm 9336.00 Rmt.
iv) 8.00 mm 10679.00 Rmt.
v) 9.00 mm. 12025.00 Rmt.
vi) 10.00 mm. 13373.00 Rmt.
vii) 12.00 mm. 16079.00 Rmt.
s) Dia of Pipe:1100.00 mm (I.D.) Thickness of
pipe:
i) 5.00 mm 6971.00 Rmt.
ii) 6.00 mm 8373.00 Rmt.
iii) 7.00 mm 9776.00 Rmt.
iv) 8.00 mm 11183.00 Rmt.
v) 9.00 mm. 12593.00 Rmt.
vi) 10.00 mm. 14005.00 Rmt.
vii) 12.00 mm. 16837.00 Rmt.
/ 283 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
t) Dia of Pipe:1150.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 7286.00 Rmt.
ii) 6.00 mm 8752.00 Rmt.
iii) 7.00 mm 10218.00 Rmt.
iv) 8.00 mm 11688.00 Rmt.
v) 9.00 mm. 13161.00 Rmt.
vi) 10.00 mm. 14635.00 Rmt.
viii) 12.00 mm. 17593.00 Rmt.
u) Dia of Pipe:1200.00 mm (I.D.)
Thickness of pipe:
i) 5.00 mm 7601.00 Rmt.
ii) 6.00 mm 9129.00 Rmt.
iii) 7.00 mm 10660.00 Rmt.
iv) 8.00 mm 12192.00 Rmt.
v) 9.00 mm. 13728.00 Rmt.
vi) 10.00 mm. 15266.00 Rmt.
vii) 12.00 mm. 18350.00 Rmt.
v) Dia of Pipe:1250.00 mm (I.D.)
Thickness of pipe:
i) 6.00 mm 9508.00 Rmt.
ii) 7.00 mm 11102.00 Rmt.
iii) 8.00 mm 12697.00 Rmt.
iv) 9.00 mm. 14296.00 Rmt.
v) 10.00 mm. 15897.00 Rmt.
vi) 12.00 mm. 19107.00 Rmt.
w) Dia of Pipe:1300.00 mm (I.D.)
Thickness of pipe:
i) 6.00 mm 9887.00 Rmt.
ii) 7.00 mm 11542.00 Rmt.
iii) 8.00 mm 13201.00 Rmt.
/ 284 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iv) 9.00 mm. 14864.00 Rmt.
v) 10.00 mm. 16527.00 Rmt.
vi) 12.00 mm. 19864.00 Rmt.
x) Dia of Pipe:1350.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 11985.00 Rmt.
ii) 8.00 mm 13707.00 Rmt.
iii) 9.00 mm 15432.00 Rmt.
iv) 10.00 mm. 17158.00 Rmt.
v) 12.00 mm. 20621.00 Rmt.
y) Dia of Pipe:1400.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 12426.00 Rmt.
ii) 8.00 mm 14212.00 Rmt.
iii) 9.00 mm 15999.00 Rmt.
iv) 10.00 mm. 17789.00 Rmt.
v) 12.00 mm. 21378.00 Rmt.
z) Dia of Pipe:1450.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 12867.00 Rmt.
ii) 8.00 mm 14716.00 Rmt.
iii) 9.00 mm 16567.00 Rmt.
iv) 10.00 mm. 18421.00 Rmt.
iv) 12.00 mm. 22135.00 Rmt.
aa) Dia of Pipe:1500.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 13310.00 Rmt.
ii) 8.00 mm 15221.00 Rmt.
iii) 9.00 mm 17135.00 Rmt.
iv) 10.00 mm. 19052.00 Rmt.
v) 12.00 mm. 22891.00 Rmt.
/ 285 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
ab) Dia of Pipe:1550.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 13751.00 Rmt.
ii) 8.00 mm 15726.00 Rmt.
iii) 9.00 mm 17702.00 Rmt.
iv) 10.00 mm. 19683.00 Rmt.
v) 12.00 mm. 23649.00 Rmt.
ac) Dia of Pipe:1600.00 mm (I.D.)
Thickness of pipe:
i) 7.00 mm 14192.00 Rmt.
ii) 8.00 mm 16230.00 Rmt.
iii) 9.00 mm 18271.00 Rmt.
iv) 10.00 mm. 20313.00 Rmt.
v) 12.00 mm. 24405.00 Rmt.
ad) Dia of Pipe:1650.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 16735.00 Rmt.
ii) 9.00 mm 18837.00 Rmt.
iii) 10.00 mm 20944.00 Rmt.
iv) 12.00 mm. 25162.00 Rmt.
ae) Dia of Pipe:1700.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 17239.00 Rmt.
ii) 9.00 mm 19406.00 Rmt.
iii) 10.00 mm 21575.00 Rmt.
iv) 12.00 mm. 25919.00 Rmt.
af) Dia of Pipe:1750.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 17744.00 Rmt.
ii) 9.00 mm 19974.00 Rmt.
iii) 10.00 mm 22205.00 Rmt.
/ 286 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iv) 12.00 mm. 26676.00 Rmt.
ag) Dia of Pipe:1800.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 18249.00 Rmt.
ii) 9.00 mm 20541.00 Rmt.
iii) 10.00 mm 22836.00 Rmt.
iv) 12.00 mm. 27435.00 Rmt.
ah) Dia of Pipe:1850.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 18753.00 Rmt.
ii) 9.00 mm 21110.00 Rmt.
iii) 10.00 mm 23468.00 Rmt.
iv) 12.00 mm. 28191.00 Rmt.
ai) Dia of Pipe:1900.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 19258.00 Rmt.
ii) 9.00 mm 21677.00 Rmt.
iii) 10.00 mm 24098.00 Rmt.
iv) 12.00 mm. 28948.00 Rmt.
aj) Dia of Pipe:1950.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 19763.00 Rmt.
ii) 9.00 mm 22245.00 Rmt.
iii) 10.00 mm 24729.00 Rmt.
iv) 12.00 mm. 29705.00 Rmt.
ak) Dia of Pipe:2000.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 20267.00 Rmt.
ii) 9.00 mm 22811.00 Rmt.
iii) 10.00 mm 25359.00 Rmt.
iv) 12.00 mm. 30462.00 Rmt.
/ 287 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
v) 16.00 mm. 40696.00 Rmt.
al) Dia of Pipe:2050.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 20772.00 Rmt.
ii) 9.00 mm 23380.00 Rmt.
iii) 10.00 mm 25990.00 Rmt.
iv) 12.00 mm. 31219.00 Rmt.
v) 16.00 mm. 41706.00 Rmt.
am) Dia of Pipe:2100.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 21277.00 Rmt.
ii) 9.00 mm 23948.00 Rmt.
iii) 10.00 mm 26621.00 Rmt.
iv) 12.00 mm. 31975.00 Rmt.
v) 16.00 mm. 42715.00 Rmt.
an) Dia of Pipe:2150.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 21781.00 Rmt.
ii) 9.00 mm 24516.00 Rmt.
iii) 10.00 mm 27252.00 Rmt.
iv) 12.00 mm. 32733.00 Rmt.
v) 16.00 mm. 43724.00 Rmt.
ao) Dia of Pipe:2200.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 22286.00 Rmt.
ii) 9.00 mm 25083.00 Rmt.
iii) 10.00 mm 27883.00 Rmt.
iv) 12.00 mm. 33489.00 Rmt.
v) 16.00 mm. 44733.00 Rmt.
ap) Dia of Pipe:2250.00 mm (I.D.)
/ 288 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
Thickness of pipe:
i) 8.00 mm 22791.00 Rmt.
ii) 9.00 mm 25650.00 Rmt.
iii) 10.00 mm 28513.00 Rmt.
iv) 12.00 mm. 34247.00 Rmt.
v) 16.00 mm. 45743.00 Rmt.
aq) Dia of Pipe:2300.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 23296.00 Rmt.
ii) 9.00 mm 26219.00 Rmt.
iii) 10.00 mm 29145.00 Rmt.
iv) 12.00 mm. 35003.00 Rmt.
v) 16.00 mm. 46752.00 Rmt.
ar) Dia of Pipe:2350.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 23801.00 Rmt.
ii) 9.00 mm 26787.00 Rmt.
iii) 10.00 mm 29775.00 Rmt.
iv) 12.00 mm. 35761.00 Rmt.
v) 16.00 mm. 47762.00 Rmt.
as) Dia of Pipe:2400.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 24305.00 Rmt.
ii) 9.00 mm 27355.00 Rmt.
iii) 10.00 mm 30406.00 Rmt.
iv) 12.00 mm. 36518.00 Rmt.
v) 16.00 mm. 48772.00 Rmt.
at) Dia of Pipe:2450.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 24810.00 Rmt.
ii) 9.00 mm 27922.00 Rmt.
/ 289 /
CIDCO SCHEDULE OF RATES : 2015-2016
M.S. Pipes…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
iii) 10.00 mm 31037.00 Rmt.
iv) 12.00 mm. 37275.00 Rmt.
v) 16.00 mm. 49781.00 Rmt.
au) Dia of Pipe:2500.00 mm (I.D.)
Thickness of pipe:
i) 8.00 mm 25315.00 Rmt.
ii) 9.00 mm 28489.00 Rmt.
iii) 10.00 mm 31668.00 Rmt.
iv) 12.00 mm. 38032.00 Rmt.
v) 16.00 mm. 50790.00 Rmt.
/ 290 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 291 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 292 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 293 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 294 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 295 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 296 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 297 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 298 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 299 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 300 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 301 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 302 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 303 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 304 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 305 /
CIDCO SCHEDULE OF RATES : 2015-2016
CHAMBERS
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
CH-001 Valve chamber with precast R.C.C. Covers.
Providing and Constructing B.B. masonry valve chamber
with 15 cm thick 1:3:6 proportion PCC bedding, excluding
excavation, B.B.Masonry in C.M. 1:5 Proportion precast
RCC frame and cover, etc. complete as directed by
Engineer-in-Charge.
(Note : Wall thickness : 0.23 M for depth of 1.2 M and
0.35 M for balance depth exceeding 1.2 M)
A. As Above of 60 x 45 cm internal size and depth upto 5129.00 No.
0.9 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 1126.00 30 cm depth
thereof
B. As Above of 90 x 45 cm internal size and depth upto 7568.00 No.
1.2 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 1345.00 30 cm depth
thereof
C. As Above of 90 x 60 cm internal size and depth upto 8235.00 No.
1.2 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 1550.00 30 cm depth
thereof
D. As Above of 90 x 90 cm internal size and depth upto 9869.00 No.
1.2 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 1694.00 30 cm depth
thereof
E. As Above of 90 cm internal size and depth upto 1.2 7480.00 No.
M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 1452.00 30 cm depth
thereof
F. As Above of 1.2 x 1.2 M internal size and depth upto 13233.00 No.
1.2 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 2178.00 30 cm depth
thereof
G. As Above of 1.5 x 1.5 M internal size and depth upto 18806.00 No.
/ 306 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
1.5 M with precast R.C.C. slab cover.
a. Add for every increase in depth of 30 cm or part 2662.00 30 cm depth
thereof
CH-002 Valve chamber with cast iron manhole frame and
covers.
Providing and Constructing B.B. Masonry valve chamber
with 15 m thick 1:3:6 proportion PCC bedding, excluding
excavation, B.B. masonry in C.M. 1:5 proportion 12 mm
thick cement plaster in C.M. 1:4 proportion on both sides
with providing and fixing C.I. manhole frame and cover in
RCC 1:2:4 coping or RCC 1:2:4 proportion x 15 cm thick
slab, etc. complete as directed by Engineer-in-Charge.
(Note : Wall thickness : 0.23 M for depth of 1.2 M and 0.35
M for balance depth exceeding 1.2M).
A. As above of 60 x 45 cm internal size and depth upto 7665.00 No.
0.9 M with 60 x 45 cm size CI manhole frame and
cover of 40 Kg.
/ 307 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
1.2 M with 53 cm dia CI manhole frame and cover of
90 Kg. Fixed in RCC Slab.
a. Add for every increase in depth of 30 cm or part 2178.00 30 cm depth
thereof
F. As above of 1.5 x 1.5 M internal size and depth upto 24286.00 No.
1.5 M with 53 cm dia CI manhole frame and cover of
90 Kg. Fixed in RCC Slab.
a. Add for every increase in depth of 30 cm or part 2747.00 30 cm depth
thereof
CH-003 Valve chamber with precase steel fibre reinforced
concrete frame and covers (S.F.R.C frame and covers)
Providing and Constructing B.B. Masonry valve chamber
with 15cm thick 1:3:6 proportion PCC bedding, excluding
excavation, B.B. Masonry in C.M. 1:5 Proportion precast
S.F.R.C. frame and cover, etc. complete as directed by
ENgineer-in-Charge.
(Note : Wall thickness : 0.23 M for depth of 1.2 M and
0.35 M for balance depth exceeding 1.2 M)
A. As above of 60x45 cm internal size and depth upto 7093.00 No.
0.9M with S.F.R.C. frame and cover.
a. Add for every increase in depth of 30 cm or part 1126.00 30 cm depth
thereof.
B. As above of 90x45 cm internal size and depth upto 10736.00 No.
1.2M with S.F.R.C. frame and cover.
a. Add for every increase in depth of 30 cm or part 1345.00 30 cm depth
thereof.
C. As above of 90x60 cm internal size and depth upto 10780.00 No.
1.2M with S.F.R.C. frame and cover.
a. Add for every increase in depth of 30 cm or part 1345.00 30 cm depth
thereof.
D. As above of 90x90 cm internal size and depth upto 1.2 14157.00 No.
M with S.F.R.C. frame and cover.
a. Add for every increase in depth of 30 cm or part 1684.00 30 cm depth
thereof.
E. As above of 1.2 x. 1.2 M internal size and depth upto 17545.00 No.
1.2 M with S.F.R.C. frame and cover of size 540 mm
/ 308 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
dia. fixed in RCC slab.
a. Add for every increase in depth of 30 cm or part 2142.00 30 cm depth
thereof.
F. As above of 1.5 x. 1.5 M internal size and depth upto 23437.00 No.
1.2 M with S.F.R.C. frame and cover of size 540 mm
dia. fixed in RCC slab.
a. Add for every increase in depth of 30 cm or part 2753.00 30 cm depth
thereof.
CH-004 Providing and fixing in position M.S. Air valve boxes
fabricated with 2 mm thick M.S. plate. 30´30´3 mm size
M.S. angle frame, concre-ting in M-150 for fixing the box
in position; applying two coats of oil paint, painting
chainage, locking arragement, etc. complete as directed by
Engineer-in-charge.
a) For single ball air valve 2132.00 No.
b) for double ball air valve 2910.00 No.
CH-005 Providing and fixing C.I. road box including loading,
unloading and carting to site of work including all necessary
excavation in all types of strata and fixing in murum
packing, etc. complete
a) 100mmx225mm (20kg) 1506.00 No.
b) 225 mmx300 mm (40 kg) 2957.00 No.
CH-006 Providing and fixing in position steel fibre reinforced
concrete (S.F.R.C.) frame and covers of approved make
including loading unloading, transportation, all taxes, etc.
complete as directed by Engineer-in-charge (20 tones
capacity)
a) 540 mm dia. 2633.00 No.
b) 560 mm dia. 3628.00 No.
c) 90 x 45 cm size 2633.00 No.
d) 90 x 60 cm size 2853.00 No.
e) 60 x 60 cm size 2606.00 No.
f) 60 x 45 cm size 2258.00 No.
CH-007 Providing and fixing inteterceting sewer trap including
concrete bedding, etc. complete.
/ 309 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
a) 150 x 100 mm 365.00 No.
b) 100 x 100 mm 263.00 No.
CH-008 Providing and fixing in position S.W. bends of various size,
etc. complete.
a) 100 mm 116.00 No.
b) 150 mm 138.00 No.
CH-009 Providing and fixing „Y‟ junction and labour, etc. complete
Saddle junction
a) 100 x 100 mm 141.00 No.
b) 150 x 150 x 100 mm 163.00 No.
c) 300 x 300 x 300 mm 191.00 No.
d) 300 x 300 x 100 mm 163.00 No.
CH-010 Providing and fixing in position A.C. soil
ventilators/slotted as necessary and as directed by
Engineer-in-charge etc. complete.
a) 80 mm 138.00 No.
b) 100 mm 167.00 No.
c) 150 mm 237.00 No.
CH-011 Providing and fixing A.C. soil pipe or down take pipe with
all required fittings, taking hole, etc. complete (as per
manufacturer‟s code of practice)
a) 80 mm 241.00 No.
b) 100 mm 287.00 No.
c) 150 mm 450.00 No.
CH-012 Providing and fixing Cast Iron soil pipe of 1.8 M length
including taking out holes and all required fittings, etc.
complete S/S
a) 80 mm 834.00 No.
b) 100 mm 947.00 No.
CH-013 Providing and fixing Cast Iron soil pipe of 1.8 M length
including taking out holes and all required fittings, etc.
complete D/S
/ 310 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
a) 80 mm 900.00 No.
b) 100 mm 1044.00 No.
CVH-14 Providing and constructing on sewer. B.B. masonry 21065.00 No.
circular manhole concentric cone 1.2 M dia. at bottom
and 0.5 M dia. at top and upto a depth of 2.00 M with 23
cm brick work in CM 1:4 proportion excluding excavation
including foundation concrete 250 mm thick and hounches
and channels in c.c 1:2:4 proportion, finishing channels in
smooth rendering, providing C.I. dapuri type steps each
weighing 5.5 kg., 1:2:4 coping and providing and fixing
approved make and quality S.F.R.C. frame and cover of 56
cm dia. etc. complete as directed by Engineer-in-charge.
a) Rebate for every decrease in depth of 50 cm or part 2904.00 50 Cm depth
thereof
CVH-15 Providing and constructing on sewer, B.B. masonry 58080 No.
circular manhole concentric cone 1.5 M dia. at bottom
and 0.5 M dia. at top and upto a depth of 5.00 M with 23
cm brick work up to depth of 2 M from top and 35 cm
thick brick work for balance depth in CM 1:4 proportion
with 20 mm thick smooth plaster on both side in cm 1:2
proportion excluding excavation including foundation
concrete 250 mm thick and hounches and channels in c.c
1:2:4 proportion, finishing channels in smooth rendering,
providing C.I. dapuri type steps each weighing 5.5 kg., 1:2:4
coping and providing and fixing approved make and quality
S.F.R.C. frame and cover of 56 cm dia. etc. complete as
directed by Engineer-in-charge.
a) Rebate for every decrease in depth of 50 cm or part 5869.00 50 Cm depth
thereof
CVH-16 Providing and constructing on sewer, B.B. masonry 117612.00 No.
circular manhole concentric cone 1.5 M dia. at bottom
and 0.5 M dia. at top and upto a depth of 9.00 M with 23
cm brick work up to depth of 2 M from top and 35 cm
thick brick work for depth of 2 M and 45 cm thick brick
work for remaining depth work up to 9M in CM 1:4
proportion with 20 mm thick smooth plaster on both side
in cm 1:2 proportion excluding excavation including
foundation concrete 250 mm thick and hounches and
/ 311 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
channels in c.c 1:2:4 proportion, finishing channels in
smooth rendering, providing C.I. dapuri type steps each
weighing 5.5 kg., 1:2:4 coping and providing and fixing
approved make and quality S.F.R.C. frame and cover of 56
cm dia. etc. complete as directed by Engineer-in-charge.
a) Rebate for every decrease in depth of 50 cm or part 7286.00 50 Cm depth
thereof
CVH-17 Providing and constructing B.B. masonry circular
manhole without conical shape excluding excavation,
RCC 1:2:4 proportion, 20 cm bedding brick masonry in
CM 1:4 proportion, 23 cm thick for 2 M depth from top 35
cm thick for 2 M below it and 45 cm thick for balance
depth, RCC slab at top and 2 M depth from top for
supporting brick masonry above it, plastering with smooth
finish in CM 1:2 proportion C.C.1:2:4 finishing channels in
smooth rendering, providing C.I. dapuri type steps each
weighing 5.5 kg., providing and fixing S.F.R.C. frame and
cover of 56 cm. dia. at top including cost of all materials
and labour, etc. complete.
1.00 M dia. x 2 M depth 16577.00 No.
A. a) Rebate for every decrease in depth of 50 cm or part 2419.00 50 Cm depth
thereof
1.00 M dia. x 3 M depth 30501.00 No.
B. a) Rebate for every decrease in depth of 50 cm or part 4924.00 50 Cm depth
thereof
1.00 M dia. x 4.5 M depth 47965.00 No.
C. a) Rebate for every decrease in depth of 50 cm or part 6313.00 50 Cm depth
thereof
1.50 M dia. x 2 M depth 30389.00 No.
D. a) Rebate for every decrease in depth of 50 cm or part 4294.00 50 Cm depth
thereof
1.50 M dia. x 3 M depth 41379.00 No.
E. a) Rebate for every decrease in depth of 50 cm or part 6497.00 50 Cm depth
thereof
1.50 M dia. x 4.5 M depth 64313.00 No.
/ 312 /
CIDCO SCHEDULE OF RATES : 2015-2016
Chambers…
ITEM -
DESCRIPTION 2015-16 UNIT
CODE
F. a) Rebate for every decrease in depth of 50 cm or part 8273.00 50 Cm depth
thereof
CVH-18 Providing 150 mm dia S.W. or R.C.C. pipes in vertical drop 1907.00 No.
arrangement including providing 150 mm dia S.W. and
R.C.C. pipe fixed in B.B. masonry of manhole at the
required level including providing 150 mm dia double tee,
150 mm dia right angled bend, encasing in B.B. masonry
1:4 proportion all around the pipe, double tee, bend upto
the foundation of manhole , jointing, cutting, filleting
including neat cement rendering, plugging the opening with
jungle wood knob complete as directed by Engineer-in-
charge (0.60 M depth) excluding cost of chamber.
a) Extra for every 0.5 M depth beyond initial depth of 671.00 50 Cm depth
0.60 M
CVH-19 As above but for 200 mm dia pipes and depth 0.60 M 2423.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 797.00 50 Cm depth
0.60 M
CVH-20 As above but for 250 mm dia pipes and depth 0.60 M 2976.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 780.00 50 Cm depth
0.60 M
CVH-21 As above but for 300 mm dia pipes and depth 0.60 M 3559.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 896.00 50 Cm depth
0.60 M
CVH-22 As above but for 400 mm dia pipes and depth 0.60 M 4909.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 1102.00 50 Cm depth
0.60 M
CVH-23 As above but for 500 mm dia pipes and depth 0.60 M 5321.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 1217.00 50 Cm depth
0.60 M
CVH-24 As above but for 600 mm dia pipes and depth 0.60 M 6124.00 No.
a) Extra for every 0.5 M depth beyond initial depth of 1401.00 50 Cm depth
0.60 M
Transportation charges over distance 0.05 to 200.00 kms. Including loading & unloading charges.
STATEMENT 'C' FOR THE YEAR 2015-2016
/ 313 /
CIDCO SCHEDULE OF RATES : 2015-2016
trips N= (8/(F*
of Diesel in
Of Oil in Ltrs
of Oil Rs.
(L/S))+1))
Cost of 6
Mazdoor
in kms L
Cost Rs.
FNL+6
Gross
Factor
Total
No.of
Done
Kms
Rs.
Total
Qty.
Hire
Cost
Avrg
Ltrs
Lead
Qty.
10%
Cost
Cost
Rs .
Rs.
Rs.
1 2 F
3 4 5 6 7 8 9 10 11 12 13 14 15
0.50 15 2 7.5 13.5 3.38 192.1 0.1 26.8 2538.00 3200 5956.85 595.69 6552.54 873.67
1.00 16 2 7.11 20.22 5.06 287.5 0.14 37.52 2538.00 3200 6063.03 606.3 6669.33 938.02
1.50 16.5 2 6.77 26.31 6.58 373.9 0.19 50.92 2538.00 3200 6162.80 616.28 6779.08 1001.34
2.00 17 2 6.48 31.92 7.98 453.4 0.23 61.64 2538.00 3200 6253.06 625.31 6878.37 1061.48
2.50 17.5 2 6.22 37.1 9.28 527.3 0.26 69.68 2538.00 3200 6334.97 633.5 6968.47 1120.33
3.00 17.5 2 5.96 41.76 10.44 593.2 0.3 80.4 2538.00 3200 6411.60 641.16 7052.76 1183.35
3.50 18 2 5.76 46.32 11.58 658 0.33 88.44 2538.00 3200 6484.42 648.44 7132.86 1238.34
4.00 18 2 5.54 50.32 12.58 714.8 0.36 96.48 2538.00 3200 6549.28 654.93 7204.21 1300.40
4.50 18.5 2 5.38 54.42 13.61 773.3 0.39 104.5 2538.00 3200 6615.84 661.58 7277.42 1352.68
5.00 18.5 2 5.19 57.9 14.48 822.8 0.41 109.9 2538.00 3200 6670.63 667.06 7337.69 1413.81
6.00 19 2 4.9 64.8 16.2 920.5 0.46 123.3 2538.00 3200 6781.76 678.18 7459.94 1522.44
7.00 19 2 4.61 70.54 17.64 1002 0.5 134 2538.00 3200 6874.30 687.43 7561.73 1640.29
8.00 19.5 2 4.39 76.24 19.06 1083 0.54 144.7 2538.00 3200 6965.71 696.57 7662.28 1745.39
9.00 19.5 2 4.16 80.88 20.22 1149 0.58 155.4 2538.00 3200 7042.34 704.23 7746.57 1862.16
10.00 20 2 4.00 86.00 21.5 1222 0.61 163.5 2538.00 3200 7123.11 712.31 7835.42 1958.86
15.00 20 2 3.2 102 25.5 1449 0.82 219.8 2538.00 3200 7406.67 740.67 8147.34 2546.04
20.00 25 2 3.08 129.2 32.3 1835 0.92 246.6 2538.00 3200 7819.85 781.98 8601.83 2792.80
25.00 25 2 2.67 139.5 34.88 1982 1.00 268 2538.00 3200 7987.88 798.79 8786.67 3290.89
30.00 30 2 2.67 166.2 41.55 2361 1.05 281.4 2538.00 3200 8380.27 838.03 9218.30 3452.55
35.00 30 2 2.4 174 43.5 2472 1.24 332.3 2538.00 3200 8541.99 854.2 9396.19 3915.08
40.00 35 2 2.43 200.4 50.1 2847 1.29 345.7 2538.00 3200 8930.40 893.04 9823.44 4042.57
45.00 35 2 2.24 207.6 51.9 2949 1.33 356.4 2538.00 3200 9043.40 904.34 9947.74 4440.95
50.00 35 2 2.07 213 53.25 3026 1.36 364.5 2538.00 3200 9128.15 912.81 10040.96 4850.70
60.00 35 2 1.81 223.2 55.8 3171 1.41 377.9 2538.00 3200 9286.44 928.64 10215.08 5643.69
70.00 40 2 1.78 255.2 63.8 3625 1.45 388.6 2538.00 3200 9751.72 975.17 10726.89 6026.34
80.00 40 2 1.6 262 65.5 3722 1.49 399.3 2538.00 3200 9859.03 985.9 10844.93 6778.08
90.00 40 2 1.45 267 66.75 3793 1.51 404.7 2538.00 3200 9935.42 993.54 10928.96 7537.21
100.00 40 2 1.33 272 68 3864 1.53 410 2538.00 3200 10011.80 1001.18 11012.98 8280.44
125.00 40 2 1.1 281 70.25 3992 2.01 538.7 2538.00 3200 10268.29 1026.83 11295.12 10268.29
150.00 40 2 0.94 288 72 4091 2.06 552.1 2538.00 3200 10381.12 1038.11 11419.23 12148.12
175.00 40 2 0.82 293 73.25 4162 2.09 560.1 2538.00 3200 10460.19 1046.02 11506.21 14031.96
200.00 40 2 0.73 298 74.5 4233 2.12 568.2 2538.00 3200 10539.25 1053.93 11593.18 15881.07
Note:-
1) No. of trips in working of 8 hours "N= 8 ((F* (L/S))+1))
2) Consumption of Diesel- Ltr. Per kms. Of travel (Diesel Rate Rs. 56.82 /Ltr.As on Date-
01/04/2015.)
3) In Col. 4 of "kms. Done" allowance of 6 kms. Is considered
4) Cost of Mobile Oil Rs.268.00 Per Ltr.As on Date-01/04/2015.
5) Mazadoor for Loading/Unloading Rs.423.00/day.(Provided by Division Office for Unskilled
labour).
6) Hire charges of truck of capacity 10MT is Rs.3200/day.
7) L.F.-Pay load factor/Trip.
/ 314 /
CIDCO SCHEDULE OF RATES : 2015-2016
Statement 'C1' ,Transportation Charges for Different Material FOR THE YEAR 2015-2016
Sand, Hand
crushed brokan Steel,
Rubble Asphalt Concre
Earth, Metal, metal Cement, All Hot Mix
Cost per Excavated in te block R.C.C.Hume pipe for
Murum, Stone aggre. R.C.C. Bulk Roofing Types Bitumi-
Rock Bricks &
Trip Building below 40mm Blocks, Bituman Dru Tiles of C.D.work nous
soiling Laterite
Rubish 40mm, normal G.I. m Flooring Material
stone Stone.
Lead in normal size & Sheet
KMS brick above
L.F.
Task/ 6.00 5.75 5.50 4.70 9.00 45.00 3500 6.0 30 5.50
7.50M.T. 5000 No. 110 Sqm 15 Rmt. 5 Rmt.
Trip (Cum) (Cum) (Cum) (Cum) M.T. (No) (No) cumt Rmt. (Unit
Cum)
per per 1000
Unit Cumt Cumt Cumt Cumt per M.T. per M.T. per no. Cumt per sqm Rmt. Rmt. Rmt. Cumt
1000 no. No.
1 2 3 4 5 6 7 8 9 10 11 12 1 14 15 16 17
3
0.50 873.67 145.61 151.94 158.85 185.89 97.07 116.49 19.41 249.62 145.61 174.73 7.94 29.12 58.24 174.73 158.85
1.00 938.02 156.34 163.13 170.55 199.58 104.22 125.07 20.84 268.01 156.34 187.60 8.53 31.27 62.53 187.60 170.55
1.50 1001.34 166.89 174.15 182.06 213.05 111.26 133.51 22.25 286.10 166.89 200.27 9.10 33.38 66.76 200.27 182.06
2.00 1061.48 176.91 184.60 193.00 225.85 117.94 141.53 23.59 303.28 176.91 212.30 9.65 35.38 70.77 212.30 193.00
2.50 1120.33 186.72 194.84 203.70 238.37 124.48 149.38 24.90 320.10 186.72 224.07 10.18 37.34 74.69 224.07 203.70
3.00 1183.35 197.22 205.80 215.15 251.78 131.48 157.78 26.30 338.10 197.22 236.67 10.76 39.44 78.89 236.67 215.15
3.50 1238.34 206.39 215.36 225.15 263.48 137.59 165.11 27.52 353.81 206.39 247.67 11.26 41.28 82.56 247.67 225.15
4.00 1300.40 216.73 226.16 236.44 276.68 144.49 173.39 28.90 371.54 216.73 260.08 11.82 43.35 86.69 260.08 236.44
4.50 1352.68 225.45 235.25 245.94 287.80 150.30 180.36 30.06 386.48 225.45 270.54 12.30 45.09 90.18 270.54 245.94
5.00 1413.81 235.64 245.88 257.06 300.81 157.09 188.51 31.42 403.95 235.64 282.76 12.85 47.13 94.25 282.76 257.06
6.00 1522.44 253.74 264.77 276.81 323.92 169.16 202.99 33.83 434.98 253.74 304.49 13.84 50.75 101.50 304.49 276.81
7.00 1640.29 273.38 285.27 298.23 349.00 182.25 218.71 36.45 468.65 273.38 328.06 14.91 54.68 109.35 328.06 298.23
8.00 1745.39 290.90 303.55 317.34 371.36 193.93 232.72 38.79 498.68 290.90 349.08 15.87 58.18 116.36 349.08 317.34
9.00 1862.16 310.36 323.85 338.57 396.20 206.91 248.29 41.38 532.04 310.36 372.43 16.93 62.07 124.14 372.43 338.57
10.00 1958.86 326.48 340.67 356.16 416.78 217.65 261.18 43.53 559.67 326.48 391.77 17.81 65.30 130.59 391.77 356.16
15.00 2546.04 424.34 442.79 462.92 541.71 282.89 339.47 56.58 727.44 424.34 509.21 23.15 84.87 169.74 509.21 462.92
20.00 2792.80 465.47 485.70 507.78 594.21 310.31 372.37 62.06 797.94 465.47 558.56 25.39 93.09 186.19 558.56 507.78
25.00 3290.89 548.48 572.33 598.34 700.19 365.65 438.79 73.13 940.25 548.48 658.18 29.92 109.70 219.39 658.18 598.34
30.00 3452.55 575.42 600.44 627.74 734.58 383.62 460.34 76.72 986.44 575.42 690.51 31.39 115.08 230.17 690.51 627.74
35.00 3915.08 652.51 680.88 711.83 833.00 435.01 522.01 87.00 1118.59 652.51 783.02 35.59 130.50 261.01 783.02 711.83
40.00 4042.57 673.76 703.06 735.01 860.12 449.17 539.01 89.83 1155.02 673.76 808.51 36.75 134.75 269.50 808.51 735.01
45.00 4440.95 740.16 772.34 807.45 944.88 493.44 592.13 98.69 1268.84 740.16 888.19 40.37 148.03 296.06 888.19 807.45
50.00 4850.70 808.45 843.60 881.95 1032.06 538.97 646.76 107.79 1385.92 808.45 970.14 44.10 161.69 323.38 970.14 881.95
60.00 5643.69 940.61 981.51 1026.13 1200.78 627.08 752.49 125.42 1612.48 940.61 1128.74 51.31 188.12 376.25 1128.74 1026.13
70.00 6026.34 1004.39 1048.06 1095.70 1282.20 669.59 803.51 133.92 1721.81 1004.39 1205.27 54.78 200.88 401.76 1205.27 1095.70
80.00 6778.08 1129.68 1178.80 1232.38 1442.14 753.12 903.74 150.62 1936.59 1129.68 1355.62 61.62 225.94 451.87 1355.62 1232.38
90.00 7537.21 1256.20 1310.82 1370.40 1603.66 837.47 1004.96 167.49 2153.49 1256.20 1507.44 68.52 251.24 502.48 1507.44 1370.40
100.00 8280.44 1380.07 1440.08 1505.53 1761.79 920.05 1104.06 184.01 2365.84 1380.07 1656.09 75.28 276.01 552.03 1656.09 1505.53
125.00 10268.29 1711.38 1785.79 1866.96 2184.74 1140.92 1369.10 228.18 2933.80 1711.38 2053.66 93.35 342.28 684.55 2053.66 1866.96
150.00 12148.12 2024.69 2112.72 2208.75 2584.71 1349.79 1619.75 269.96 3470.89 2024.69 2429.62 110.44 404.94 809.87 2429.62 2208.75
175.00 14031.96 2338.66 2440.34 2551.26 2985.52 1559.11 1870.93 311.82 4009.13 2338.66 2806.39 127.56 467.73 935.46 2806.39 2551.26
200.00 15881.07 2646.84 2761.92 2887.47 3378.95 1764.56 2117.48 352.91 4537.45 2646.84 3176.21 144.37 529.37 1058.74 3176.21 2887.47
/ 315 /
CIDCO SCHEDULE OF RATES : 2015-2016
STATEMENT 'C2'
LOADING, UNLOADING & STACKING
Rates for 2015-16
1 Boulders, Rubble stones and metal of all Cu.m. 27.47 17.17 17.17
the sizes
2 Murum, Sand Gravel, stone dust, Earth Cu.m. 15.45 10.30 10.30
and other loos materials.
3 Cement, Lime M.T. 53.23 44.63 20.60
4 Mild Steel and T.M.T. bars of all the M.T. 56.65 48.08 34.34
diametres and structural steel.
5 Bricks 1000 Nos. 34.34 29.19 17.17
6 Shahabad Stones Sq.M. 1.90 1.90 1.90
7 Manglore tile, Ridges, Hips, single 1000 Nos. 20.60 15.45 15.45
Allahabad Tiles and Country Tiles.
8 R.C.C. pipes with collars M.T. 53.23 53.23 13.74
9 Timber Cu.m. 22.32 22.32 9.45
10 Flooring tiles 1000 Nos. 32.61 26.62 20.60
11 Asphalt pack tins M.T. 46.35 46.35 27.47
/ 316 /
CIDCO SCHEDULE OF RATES : 2015-2016
LABOUR RATES
Sr No Description Unit Rate
1 Black Smith With Tools - II Class Day 470.00
/ 317 /
CIDCO SCHEDULE OF RATES : 2015-2016
Sr No Description Unit Rate
41 Gun Man for Guniting Day 423.00
61 E
Mlali t i i Day 452.00
/ 318 /
CIDCO SCHEDULE OF RATES : 2015-2016
MATERIAL RATES
Sr No Description Unit Rate `
Building-Bd-A : Excavation
1 Blasting Powder Kilogram 223.00
2 Detonator Number 70.50
3 Fuse Number 29.50
4 Nipple For Fastening Detenator Number 34.60
5 Noble Dynamite Kilogram 160.00
6 Red Tape Safety Fuse Running Meter 54.00
7 Soft Murum Cu.Mt. 92.00
8 Quarry Spoul Cu.Mt. 235.00
9 Rubble Stone (Blasted) Cu.Mt. 328.00
Building-Bd-B : Pile Foundation
1 Sand Natural Cu.Mt. 1500.00
2 Sand Crushed Cu.Mt. 1000.00
3 Aggregate 20 mm Cu.Mt. 717.00
4 Aggregate 12 mm Cu.Mt. 714.00
5 Bentonite Kg 100.00
6 Sand (Screened) Cu.Mt. 1710.00
7 Aggregate 25 mm Cu.Mt. 704.00
8 Empty Cement Bag No. 2.00
Building-Bd-C : Structural Steel Work
1 M.S. Locking Arrangement for gate Number 270.00
2 Nut Bolt Washers 12 mm dia 45 mm long Number 10.00
3 Oil enamel paint/flat/glossy paint(ready mix) (with Litre 357.00
I.S.I. Mark)
4 Red Oxide paint Litre 187.00
5 Structural Steel M.T. 47250.00
6 Hold fast for steel gate No. 138.00
7 G.I. Pipe 25mm dia. Medium type Running Meter 197.00
8 G.I. Pipe 50mm dia. Medium type Running Meter 390.00
9 Nut Bolts 16mm dia. Kilogram 27.50
10 Tubular Steel Metric Tonne 56000.00
11 Welding Electrodes Number 8.00
Building-Bd-E : Plain Cement Concrete
1 Aggregate 40 mm Crusher Broken Cubic Meter 610.00
2 Sand - Natural Cubic Meter 1500.00
3 Aggregate 20 mm Cu.Mt. 717.00
4 Aggregate 12 mm Cu.Mt. 714.00
5 Jungle wood (non teak) normal Cubic Meter 32899.00
Building-Bd-F : Reinforcement Cement concrete
1 Binding Wire Kilogram 118.00
2 Centering Oil Litre 87.00
3 Plastic Cover Block Number 18.00
/ 319 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 320 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 321 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 322 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 323 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 324 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 325 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 326 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 327 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 328 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 329 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 330 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 331 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 332 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 333 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 334 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 335 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 336 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 337 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 338 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 339 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 340 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 341 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 342 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 343 /
CIDCO SCHEDULE OF RATES : 2015-2016
/ 344 /