Professional Documents
Culture Documents
Quick-Cal
g Fast
g Compact
32 | CALIBRATION SOLUTIONS
Specification Specification
Model Low Temperature Quick-Cal Model High Temperature Quick-Cal
Temperature -12°C to +140°C Temperature +30°C to +350°C
Range In an ambient of 20°C Range In an ambient of 20°C
The Quick-Cal will achieve lower
Set Point Resolution 0.1°C over range
temperature if used in a lower
ambient temperature Accuracy ±0.1 to ±0.4°C using Comparison
Techniques
Set Point Resolution 0.1°C over range
<100°C ±0.4°C against display
Accuracy ±0.1 to ±0.4°C using Comparison temperature with a single probe in
Techniques the 4.5mm pocket
±0.4°C against display >100°C ±1.5°C against display
temperature with a single probe in temperature with a single probe in
the 6.8mm drilled sleeve the 4.5mm pocket
Stability ±0.05°C Stability ±0.05°C
Time to Set Point 9 minutes from 0°C to 100°C Time to Set Point 9 minutes from Ambient to 350°C
Additional Time Typically 5 minutes Additional Time Typically 5 minutes
for best stability
for best stability
Calibration volume Two 13mm diameter pockets
Calibration volume 25mm diameter 120mm deep
120mm deep. Supplied with two
Supplied with insert, 5 pockets,
sleeves, one blank and one drilled
8mm, 6.5mm, 6.5mm, 4.5mm,
6.8mm diameter 120mm deep
4.5mm, all 115mm deep
Voltage 15Vdc or 100-240V, Switch mode
Voltage 100-130V or 200-240V, (50 / 60 Hz)
power supply (50 / 60 Hz)
Power 70 Watts Power 350 Watts
How To Order
Specify Model, Low or High Temp, Supply Voltage, Accessories and if UKAS Calibration is required.
CALIBRATION SOLUTIONS | 33