Professional Documents
Culture Documents
Recommended Value For Point Tap in Through Hole: Points of Tapping (How To Use A Spiral Pointed Tap Properly)
Recommended Value For Point Tap in Through Hole: Points of Tapping (How To Use A Spiral Pointed Tap Properly)
推奨値:食付き部 +3 山程度
加工のポイント
Recommended: Chamfer + about 3 threads
二次溝を抜いて逆転する
(ポイントタップの上手な使い方)
Rotate reversely after a secondary flute goes out
from work material.
Points of Tapping (how to use a spiral pointed tap properly)
ワーク
ポイントタップは、ワーク端面から二次溝が抜けるよう 食付き部のみを抜いて逆転する
にストローク設定することで切りくずがスムーズに排出 ( 切りくずかみ込みの可能性あり)
されます。 Rotate reversely after a chamfer goes out from
work material.
Spiral pointed tap can discharge chips smoothly by
setting the stroke so that a secondary flute goes out from
the end face of work material.
本 社 〈工具の技術的なご相談は…〉コミュニケーションダイヤル
〒442-8543 愛知県豊川市本野ケ原三丁目22番地 TEL(0533)82-1111
0120-41-5981
よ い 工 具 は 一 番
E-mail : cs-info@osg.co.jp Web : https://www.osg.co.jp/
土日祝日、
International Headquarters 会社休日を除く
3-22 Honnogahara, Toyokawa, Aichi, 442-8543, JAPAN
TEL : +81-533-82-1118 FAX : +81-533-82-1136 コミュニケーション FAX 0533-82-1134 コミュニケーション E-mail hp-info@osg.co.jp
F-408.2021.11
(DN)