Professional Documents
Culture Documents
Copyright © All product information within this document is subject to ABB Motors and Mechanical Inc. copyright © protection, unless otherwise noted.
6/2/2021 1:00:06 PM
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1
KVA Code J
Lifting Lugs Standard Lifting Lugs
Front Face Code Standard
Front Shaft Indicator None
Heater Indicator CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, No Heater
60HZ, 254T, 0756M, TEFC, F1
High Voltage Full Load Amps 18.5 a
Insulation Class F
Inverter Code Not Inverter
KVA Code J
Lifting Lugs Standard Lifting Lugs
Locked Bearing Indicator No Locked Bearing
Motor Lead Exit Ko Box
Motor Lead Quantity/Wire Size 9 @ 14 AWG
Motor Lead Termination Flying Leads
Motor Standards NEMA
Motor Type 0756M
Mounting Arrangement F1
Number of Poles 4
Overall Length 21.07 IN
Power Factor 83
Product Family General Purpose
Pulley End Bearing Type Ball
Pulley Face Code Standard
Pulley Shaft Indicator Standard
Rodent Screen None
Service Factor 1.15
Shaft Diameter 1.625 IN
Shaft Extension Location Pulley End
Shaft Ground Indicator No Shaft Grounding
Shaft Rotation Reversible
Shaft Slinger Indicator No Slinger
Speed 1760 rpm
Speed Code Single Speed
Starting Method Direct on line
Thermal Device - Bearing None
Thermal Device - Winding None
Vibration Sensor Indicator No Vibration Sensor
Winding Thermal 1 None
Winding Thermal 2 None
Page 3 of 10
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1
Nameplate
NP1256L
CAT.NO.
SPEC. 07H203X739H1
HP 15
VOLTS 208-230/460
AMP 40-37/18.5
RPM 1760
FRAME 254T HZ 60 PH 3
SER.F. 1.15 CODE J DES A CLASS F
NEMA-NOM-EFF 91 PF 83
RATING 40C AMB-CONT
CC USABLE AT 208V
DE 6309 ODE 6307
ENCL TEFC SN
Page 4 of 10
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1
Parts list
Page 6 of 10
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1
460 V, 60 Hz:
Nameplate Data
High Voltage Connection
Rated Output (HP) 15 Full Load Torque 44.6 LB-FT
Volts 208-230/460 Start Configuration direct on line
Full Load Amps 40-37/18.5 Breakdown Torque 167.1 LB-FT
R.P.M. 1760 Pull-up Torque 71.5 LB-FT
Hz 60 Phase 3 Locked-rotor Torque 101.3 LB-FT
NEMA Design Code A KVA Code J Starting Current 147.3 A
Service Factor (S.F.) 1.15 No-load Current 7.39 A
NEMA Nom. Eff. 91 Power Factor 83 Line-line Res. @ 25ºC 0.618 Ω
Rating - Duty 40C AMB-CONT Temp. Rise @ Rated Load 65°C
S.F. Amps Temp. Rise @ S.F. Load 83°C
Locked-rotor Power Factor 35
Rotor inertia 1.38 LB-FT2
Page 7 of 10
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1
95 95 1,795 19 38
90 90 1,790 18 36
85 85 1,785 17 34
80 80 1,780 16 32
75 75 1,775 15 30
70 70 1,770 14 28
65 65 1,765 13 26
60 60 1,760 12 24
55 55 1,755 11 22
50 50 1,750 10 20
45 45 1,745 9 18
40 40 1,740 8 16
35 35 1,735 7 14
30 30 1,730 6 12
25 25 1,725 5 10
20 20 1,720 4 8
15 15 1,715 3 6
10 10 1,710 2 4
5 5 1,705 1 2
0 0 1,700 0 0
0 25 50 75 100 125 150
6/2/2021 ACPERF, record # 20291 PERCENT OF RATED OUTPUT (15 HP)
Page 8 of 10
CUSTOMER INFORMATION PACKET M2333T - 15HP, 1760RPM, 3PH, 60HZ, 254T, 0756M, TEFC, F1