Professional Documents
Culture Documents
1
Command: Command: Command:
2
Specify stretch point or Command: *Cancel* Command:
[Base
Command: Specify Command:
point/Copy/Undo/eXit]:
opposite corner or
** STRETCH **
Command: [Fence/WPolygon/CPolyg
on]: Specify stretch point or
** STRETCH **
[Base
Command:
Specify stretch point or point/Copy/Undo/eXit]:
[Base Command:
Command: *Cancel*
point/Copy/Undo/eXit]:
** STRETCH **
Command: *Cancel*
Command: Specify
Specify stretch point or
opposite corner or Command: TR
[Base
[Fence/WPolygon/CPolyg
point/Copy/Undo/eXit]: TRIM
on]:
Command: *Cancel* Current settings:
Command:
Projection=UCS,
Command: Specify
** STRETCH ** Edge=None, Mode=Quick
opposite corner or
Specify stretch point or [Fence/WPolygon/CPolyg Select object to trim or
[Base on]: shift-select to extend or
point/Copy/Undo/eXit]:
Command: Specify [cuTting
Command: opposite corner or edges/Crossing/mOde/Pr
[Fence/WPolygon/CPolyg oject/eRase]:
** STRETCH **
on]:
Select object to trim or
Specify stretch point or
Command: shift-select to extend or
[Base
point/Copy/Undo/eXit]: ** STRETCH ** [cuTting
edges/Crossing/mOde/Pr
Command: *Cancel* Specify stretch point or
oject/eRase/Undo]:
[Base
Command:
point/Copy/Undo/eXit]: Specify next fence point
Command: or [Undo]:
Command:
** STRETCH ** Specify next fence point
Command:
or [Undo]:
Specify stretch point or
Command:
[Base Specify next fence point
point/Copy/Undo/eXit]: ** STRETCH ** or [Undo]:
3
Command: Command: Command:
4
Press ESC or ENTER to Command:
exit, or right-click to
Command:
display shortcut menu.
** STRETCH **
Command: Specify
opposite corner or Specify stretch point or
[Fence/WPolygon/CPolyg [Base
on]: point/Copy/Undo/eXit]:
Command: Command:
** STRETCH ** ** STRETCH **
Specify stretch point or Specify stretch point or
[Base [Base
point/Copy/Undo/eXit]: point/Copy/Undo/eXit]:
Command: Command: *Cancel*
** STRETCH ** Command:
Specify stretch point or Automatic save to C:\
[Base Users\miche\AppData\
point/Copy/Undo/eXit]: Local\Temp\
<Ortho on> <Ortho off> Drawing1_1_13007_e463
6a00.sv$ ...
Command: _.erase 1
found Command:
Command: Command:
Command: Command:
Command: Command:
Command: _copyclip 1 Command:
found
Command:
Command:
Command: _pasteclip
Specify insertion point:
Command: Specify
opposite corner or
[Fence/WPolygon/CPolyg
on]:
Command:
Command:
Command:
Command: _mtedit