Professional Documents
Culture Documents
Carrier Objective:
I am looking for a challenging position in a well reputed organization where my skill and
knowledge is utilized to the best and put to efficient use toward my career growth along
with the growth of organization. I possess effective organizational skills and the ability to
supervise a team and to develop the final output.
Academic Qualification:
Graduate in Electrical engineering (BE) from Sarhad University of science and
information technology, Peshawar, Pak.
Professional Experience in KSA:
Worked as an electrical site engineer in International Consulting and Services Co at
Faisaliah Mall Riyadh – (Jan 2018 – till date)
Worked as an electrical engineer in Projacs International at Al fareeda residential
community Project Dhahban, Jeddah – KSA (2016 – 2017 Dec)
Worked as an Electrical Substation Engineer of (110/13.8 KV Substation) at Al fareeda
residential community project Dhahban, Jeddah –KSA (2016 –2017 Dec)
Worked as an electrical site Inspector in Projacs International at IKEA Abyat Mall
Jeddah – KSA (2015 – 2016 Nov)
Page (1/4)
Responsibilities: (Consultant Electrical Engineer)
Study contract specifications / drawings.
Review of electrical shop drawing and as built drawings and answer to the
technical queries submitted by the contractor for project implementation.
Responsible for quality assurance procedure & inspect materials which supplied to
site according project documents & approvals.
To verify the quality of the material is matching the standards of the consultant as
per the specifications required by the client.
Supervise and inspect all executed electrical works at site to ensure that the
product was installed correctly.
Review, study & evaluate the variation orders (VOs) or claims, when submitted by
the contractor.
Performed reviews for projects involving electrical drawings and layouts.
Coordination with clients/ contractors for all activities.
Ensure that all the works done in accordance with the approved construction
drawings, contract documents, project specifications & all applicable standards.
Comfortable in execution of engineering activities through a team of engineers.
Coordinating with various engineering departments on site.
Maintain and updates all the quality related documents and maintaining the DPR
(Daily Progress Report).
Issue procurement requests for materials and equipment and follow up its delivery
to site.
Review shop drawings for conformance with the contract and ensure Information
is communicated to foreman and Superintendent.
Continually update drawings with changes as issued by Consultants.
Review cable termination and equipment including transformer.
Selection of size, type and class of circuit breaker (MCB, MCCB, ACB, VCB,
ELCB, RCD and its Installation).
Designing of distribution panel, sub main distribution panel, main distribution
panel, lighting system and power outlet.
Selection of proper wire and cable for load.
Calculation size of conduit and trunking size, Calculation of Cable tray size.
Follow installation instruction of single core terminator and Follow the procedure
for indoor and outdoor cable termination.
Page (2/4)
Hands on Earth Resistance Tester, MEGGER, High Voltage Detector, Clamp
meter, Multimeter.
Perform earth resistance test, insulation test, continuity test & use of proper
personnel equipment.
Digital meter reading and connection (single phase & three phase), Line
configuration, Minimum clearance of overhead lines, Calculation of
Capacitor Bank for line, Earthing of LT& HT poles, Voltage drop calculation.
To perform transformer oil analysis to check water content, dielectric strength,
acidity, interfacial tension, dissipation factor. Understand Transformer nameplate.
Calculation of size of transformer and voltage drop of starting of large Motors and
optimum location of capacitor. Knowledge of different types of poles LT & HT
conductor used, types of insulator, arms D/work estimate of transformer.
Skills:
Page (3/4)
• Specialties in automation such as programmable logical control, (PLC).
Human machine interface (HMI) & SCADA.
• Electrical Power System Analysis (ETAP Software.
• Electrical AutoCAD.
• Power Protection in low voltage, Medium Voltage and high voltage.
• Different motors controlling.
• Power generation, distribution, transmission and their concern equipment.
• Microsoft Office Suite with basic skill in Word, Power Point.
• Leadership, Team Building and Conflict Management.
Tips:
Hard working, Target Oriented, Dynamic can work in any environment.
Personal Information:
Name : Muhammad Imran Khan
Father Name : Muhammad Tayyab
Date of Birth : 1st January 1990
Nationality : Pakistani
Marital Status : Single.
Known Languages English, Urdu, Arabic Pushto
Page (4/4)