Professional Documents
Culture Documents
bakerhughes.com
Operating Specifications and Limits*
Max. ∆P 2,000 psi 138 bar
drillpipe to annulus
Min. ∆P 500 psi 34.5 bar
drillpipe to annulus
Max. recommended 325°F 163°C
temperature
NOTE: High-temperature seals are available upon request
Max. build-up-rate (BUR) Depends on BHA
* Operational parameters to yield the optimum bit life and maximum penetration
rate are variable and dependent upon application-specific factors. Baker Hughes
Technical Field Support or local Baker Hughes Drilling Services personnel may
provide additional operating recommendations.
Copyright 2019 Baker Hughes Company. All rights reserved. The information contained
in this document is company confidential and proprietary property of Baker Hughes
and its affiliates. It is to be used only for the benefit of Baker Hughes and may not be
distributed, transmitted, reproduced, altered, or used for any purpose without the
express written consent of Baker Hughes.
Baker Hughes reserves the right to make changes in specifications and features shown
herein, or discontinue the product described at any time without notice or obligation.
Contact your Baker Hughes representative for the most current information. The Baker
Hughes logo is a trademark of Baker Hughes Company. GaugePro is a trademark of
Baker Hughes Company.