Professional Documents
Culture Documents
For
.:. Draw Frames .:. Combers .:. Lapformers
Proper regulation of Drafting loadshasenabledthe spinnersto achieve .:. Over 700 Installations
.:. Choice of ISO Units and 100%EOU's
1. Decreased Yarn Count CV% 3. Decreased Strength CV%
2. Low Sliver CV% 4. Uniform Yarn Appearance .:. Exported to 9 Countries
'APEX' Draw FrameLoad GaugesMeasure drafting loadsin almost all the makes
and modelsof Draw Frames,Combers & Lapformers.
Twoseparateend load measuring blocks for individual & independent end load measurement. PatentPending
Userfriendlythreescale
dialto helpreadloadsfor
eachmake& modelof A Planometer ateachend
to helpregisterloads
machinedirectlyin kg.
withoutcalculation. againstspecificdrafting
planeinclinations.
Patentpending.
This gauge can be used to measure drafting loads in the following machines:
DRAW FRAMES : D02, D02S, D06, RSB (All Models), LDA/2, RieterD30(35), Vouk (All Models),
Padmatex & Zinser 4/3 & 5/3, Zinser, Toyoda & Cherry Hara
COMBERS : E7/4, LK250,LK54, Howa, Cherry Hara, Zinser, Vouk
LAP FORMERS : LR E4/1A, LRE 2/4A, Cherry Hara, Howa, Zinser, Vouk, Unilap
Technical Data :-
3. Calibrated with dead weights. Traceability certificate issued as per ISO norms.