Professional Documents
Culture Documents
SECURITY AND
SECTIONING FOR
ALL YOUR CIRCUITS
General catalogue
2023 - 2024
Protection, security and sectioning for
all your circuits.
Established in 2018, FMF ELECTRIC is known as the future leading brand of
low voltage products throughout South America.
GENERAL INDEX
Breakers ................................................................... pg. 3
Contactors ........................................................... pg. 35
Protection ............................................................ pg. 55
Distribution......................................................... pg. 75
Climate Control................................................. pg. 99
Signaling, Control & Switch .................... pg. 117
Residential Safety ......................................... pg. 129
Breakers
Breakers Sub-Index
D23 - Electro-magnetic Residual Current Breaker ......................... 4
T18 - Mini Circuit Breaker 4kA ............................................................. 5
T18H - Mini Circuit Breaker - High Power 10kA 947-2.................... 6
T19 - Mini Cirtuit Breaker & Auxiliaries 6kA .................................... 7
T19H - Mini Circuit Breaker 10kA ........................................................... 8
T19DC - Mini Circuit Breaker...................................................................... 9
T20 - Mini Circuit Breaker 10kA 898-1 .............................................. 11
T20DC - Mini Circuit Breaker ....................................................................13
T10 - Thermo-magnetic double adjustable MCCB ......................19
T11 - Thermo-magnetic Fixed MCCB - High power....................21
T1 - Air Circuit Breaker.......................................................................24
Characteristics ...............................................................................................32
D23
Electro-magnetic Residual Current Circuit Breaker
Technical Data
Electrical Features
Ϸ Type (wave form of the earth leakage sensed): AC, A, AC~S, A~S
Ϸ Rated current In: 25, 32, 40, 50, 63A
Ϸ Poles: 2P (1P+N), 4P (3P+N)
Ϸ Rated voltage Ue: 240/415V
Ϸ Rated sensitivity I©n: 0.03, 0.1, 0.3A
Ϸ Insulation voltage Ui: 500V
Ϸ Rated residual making and breaking capacity I©m: 500A (In=25A/40A)
630A (In=50A/63A)
Ϸ Short-circuit current Inc=I©c: 6,000A
Ϸ SCPD fuse:
Ϸ Break time under I©n: 0.1s
Ϸ Rated frequency: 50/60Hz
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric TEST voltage at ind. Freq. for 1 min: 2.5kV
Ϸ Pollution degree: 2
Mechanical Features
Ϸ Electrical life: 2.000 Cycles
Ϸ Mechanichal life: 4.000 Cycles
Ϸ Fault current indicator: YES
Ϸ Protecction degree: IP20
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable/ U-pin busbar/ Pin-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.5 Nm 18In-lbs
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom
4
www.fmfelectric.com
T18
Mini Circuit Breaker
Technical Data
Electrical Features
Ϸ Rated Current In: 6, 10, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 2P (1P+N) / 2P, 3P, 4P (3P+N) / 4P
Ϸ Rated voltage Ue: 240/415V~
Ϸ Insulation voltage Ui: 500V
Ϸ Rated frecuency: 50/60Hz
Ϸ Rated breaking capacity: 4.000A
Ϸ Energy limiting class: 3
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: B, C & D
Mechanical Features
Ϸ Electrical life: 4.000 Cycles
Ϸ Mechanichal life: 10.000 Cycles
Ϸ Contact position indicator: NO
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: TCable / Pin-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2
Ϸ Terminal size top / bottom for busbar: 25mm2
Ϸ Tightening torque: 2.0 Nm
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom
5
www.fmfelectric.com
T18H
Mini Circuit Breaker - High Power
Technical Data
Electrical Features
Ϸ Rated Current In: 63, 80, 100, 125A
Ϸ Poles: 1P, 1P+N, 2P, 3P, 3P+N, 4P
Ϸ Rated voltage Ue: 240/415V~
Ϸ Insulation voltage Ui: 500V
Ϸ Rated frecuency: 50/60Hz
Ϸ Rated short-circuit breaking capacity: 10.000A
Ϸ Energy limiting class: 3
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: C&D
Mechanical Features
Ϸ Electrical life: 4.000 Cycles
Ϸ Mechanichal life: 10.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Pin-type busbar
Ϸ Terminal size top / bottom for cable: 50mm2
Ϸ Terminal size top / bottom for busbar: 50mm2
Ϸ Tightening torque: 2.5 Nm
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom
6
www.fmfelectric.com
T19
Mini Circuit Breacker
Technical Data
Electrical Features
Ϸ Rated Current In: 6, 10, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 1P+N, 2P, 3P, 3P+N, 4P
Ϸ Rated voltage Ue: 240/415V~
Ϸ Insulation voltage Ui: 500V
Ϸ Rated frecuency: 50/60Hz
Ϸ Rated breaking capacity: 6.000A
Ϸ Energy limiting class: 3
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: B, C & D
Mechanical Features
Ϸ Electrical life: 8.000 Cycles
Ϸ Mechanichal life: 20.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable / Pin-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.0 Nm
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom
7
www.fmfelectric.com
T19H
Mini Circuit Breacker - High power
Technical Data
Electrical Features
Ϸ Rated Current In: 6, 10, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 1P+N, 2P, 3P, 3P+N, 4P
Ϸ Rated voltage Ue: 240/415V~
Ϸ Insulation voltage Ui: 500V
Ϸ Rated frecuency: 50/60Hz
Ϸ Rated short-breaking capacity: 10.000A
Ϸ Energy limiting class: 3
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: B, C & D
Mechanical Features
Ϸ Electrical life: 8.000 Cycles
Ϸ Mechanichal life: 20.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable / Pin-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.0 Nm
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom
8
www.fmfelectric.com
T19DC
Mini Circuit Breacker - DC
Technical Data
Electrical Features
Ϸ Rated Current In: 1, 2, 3, 4, 5, 6, 8, 10, 13, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 2P, 4P
Ϸ Rated voltage Ue: 1P(250VDC), 2P(500VDC), 4P(1000VDC)
Ϸ Rated breaking capacity: 6.000A
Ϸ Rated impulse withstand voltage (1.5/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: C (7~10)In
Mechanical Features
Ϸ Electrical life: 4.000 Cycles
Ϸ Mechanichal life: 10.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable / Pin-type busbar / U-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.5 Nm 22In-lbs
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: According to the wiring diagram
9
www.fmfelectric.com
Auxiliary Contact for T19
Alarm Auxiliary Contact for T19
Technical Data
Electrical Features
Ϸ Rated value: AC415/400V 50/60 Hz 3A
AC240/400V 50/60Hz 3A
DC130V 1A
DC48V 2A
DC24V 6A
Ϸ Configuration: 01T19AUXCO
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Rated short circuit making capacity: 20Ie, t=0.1s
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Insullation voltage Ui: 500V
Ϸ Pollution degree: 2
Mechanical Features
Ϸ Electrical life: 6.000 Cycles
Ϸ Mechanichal life: 10.000 Cycles
Ϸ Protecction degree: IP20
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable
Ϸ Terminal size top / bottom for cable: 25mm2 18-13AWG
Ϸ Tightening torque: 0.8 Nm 7In-lbs
10
www.fmfelectric.com
T20
Mini Circuit Breaker - High Power
Technical Data
Electrical Features
Ϸ Rated Current In: 6, 10, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 2P (1P+N) / 2P, 3P, 4P (3P+N) / 4P
Ϸ Rated voltage Ue: 240/415V~
Ϸ Insulation voltage Ui: 500V
Ϸ Rated frecuency: 50/60Hz
Ϸ Rated breaking capacity: 10.000A
Ϸ Energy limiting class: 3
Ϸ Rated impulse withstand voltage (1.2/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: B, C y D
Mechanical Features
Ϸ Electrical life: 8.000 Cycles
Ϸ Mechanichal life: 20.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable / Pin-type busbar / U-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.5 Nm 22in-lbs
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: From top and bottom.
11
www.fmfelectric.com
T20
Mini Circuit Breaker
Characteristics Curves
Tripping characteristics
Based on the Tripping Characteristics, MCB are available in”B”, “C” and “D” curves to suit different types of applications.
• “B” Curve for proteccion of electrical circuits with equipment that does not cause surge current (lightning and distribution circuits).
Short circuit release is set to 3~5 In.
• “C” Curve for protection of electrical circuits with equipment that cause surge current (inductive loads and motor circuits).
Short circuit release is set to 5~10 In.
• “D” Curve is for protection of electrical circuits which cause high inrush current, typically 12~15 times the thermal rated current
(transformers, x-ray machines, etc).
Short circuit release is set to 10~20 In.
Circuit Diagrams
12
www.fmfelectric.com
T20DC
Mini Circuit Breacker - DC
Technical Data
Electrical Features
Ϸ Rated Current In: 1, 2, 3, 4, 5, 6, 8, 10, 13, 16, 20, 25, 32, 40, 50, 63A
Ϸ Poles: 1P, 2P, 4P
Ϸ Rated voltage Ue: 1P(250VDC), 2P(500VDC), 4P(1000VDC)
Ϸ Rated breaking capacity: 10.000A
Ϸ Rated impulse withstand voltage (1.5/50) Uimp: 4.000V
Ϸ Dielectric test voltage at ind. Freq. for 1 min: 2kV
Ϸ Pollution degree: 2
Ϸ Thermo-magnetic release characteristic: C (7~10)In
Mechanical Features
Ϸ Electrical life: 4.000 Cycles
Ϸ Mechanichal life: 10.000 Cycles
Ϸ Contact position indicator: YES
Ϸ Protecction degree: IP20
Ϸ Reference temperature for setting of thermal element: 30 °C
Ϸ Ambient temperature (with daily average 35°C): -5°C ~ +40°C
Ϸ Storage temperature: -25°C ~ +70°C
Installation
Ϸ Terminal connection type: Cable / Pin-type busbar / U-type busbar
Ϸ Terminal size top / bottom for cable: 25mm2 18-3AWG
Ϸ Terminal size top / bottom for busbar: 25mm2 18-3AWG
Ϸ Tightening torque: 2.5 Nm 22In-lbs
Ϸ Mounting: On DIN rail EN60715 (35mm) by means of fast clip device
Ϸ Connection: According to the wiring diagram
13
www.fmfelectric.com
T20DC
Mini Circuit Breaker - DC
Characteristics Curves
Circuit Diagrams
14
www.fmfelectric.com
T10 - T11
Moulded Case Circuit Breaker
Product Overview
T10 and T11 Series of circuit breakers are new upgraded circuit breakers researched and developed by the
company combined with the advantages of similar international products and demand of domestic and
international markets.
With insulation voltage up to 1000V, the circuit breaker is applicable for distribution systems of AC 50Hz, rated
working voltage 690V and rated working current from 10A to 800A, used to distribute electric power energy,
protect circuits and power equipment against overload, short circuit, undervoltage and so on, also can be
used for infrequent startup of motor and protect it from overload, short circuit or undervoltage.
It is featured with small size, high breaking, short flashover, etc., is the ideal product for users. It can be
vertically or horizontally installed.
T11DC Series moulded-case circuit breaker (hereinafter referred to as circuit breaker) is suitable for DC
systems of rated voltage up to and including DC 1000V and rated current 10~800A, used to distribute electric
power energy, protect circuits and power equipment against overload, short circuit and so on.
The products can be fed with wires frem top and bottom, and it is polarity-free.
Product Features
1 Current limiting capacity
Current-limiting refers to limit of the increase of short-circuit in the loop, and in the loop protected by T10 &
T11 Series, peak value of the short-circuit current and the I2t energy in the circuit will be much smaller than the
prospective value.
2 Modularized accesories
For the circuit breakers of the same frame, they has uniform sizes regardles of the breaking capacity and rated
current.
Users can freely choose and expand functions of circuit breakers according to
their needs.
Modularizes accesories have insulation function, which is easy for hot line
operation and installation.
15
www.fmfelectric.com
T10 - T11
Moulded Case Circuit Breaker
Product Features
3 Miniaturized frame
5 frame sizes: 125 type, 160 type, 250type, 630type, 1250type.
Rated current of T10/T11 series 10A~1250A
As shown in Figure 1, the new contact device is mainly consisted of static contact, moving contact, shaft 1, shaft
2, shaft 3 and springs.
When the circuit breaker is in the closed state, shaft 2 acts on the right side of the srping angle; When the
circuit breaker has a large fault current, the moving contact will be subjected to the electric repulsion
generated by the current itself, and rotate with the center of shaft 1, when shaft 2 ratates to the top of the
spring angle with the moving contact, it makes moving contact to rapidly rotate upwards and quickly break
the circuit upon the reaction of srping, it has enhanced the breaking capacity of the product through
optimization of the contact structure.
16
www.fmfelectric.com
T10 - T11
Moulded Case Circuit Breaker
Product Features
5 Modularized arc extinguishing system
The unique design of each arc extinguishing device perfectly fits each moulded case circuit breaker
requierments.
6 Unification
The six series of T10 and T11 under the same frame size have the same dimensions, installation dimensions and
appearence style, which is completely unified design.
17
www.fmfelectric.com
T10 - T11
Moulded Case Circuit Breaker
18
www.fmfelectric.com
T10
Thermo-magnetic double adjustable MCCB
Pole number 3, 4 3, 4
Short-circuit breaking
capacity(KA)Icu/Ics 25/18 50/35 25/18
2XWOLQHGLPPP
DEFFD
FD 3P 90-155-68-90 90-155-88-115 105-165-68-92
D F
19
www.fmfelectric.com
T10
Thermo-magnetic double adjustable MCCB
Pole number 3, 4 3, 4 3, 4
Outline dim(mm)
a-b-c-ca
ca 3P 140-257-103-155 140-257-103-155 210-275-103-155
a c
20
www.fmfelectric.com
T11
Thermo-magnetic type MCCB - High power
21
www.fmfelectric.com
T11
Thermo-magnetic type MCCB - High power
22
www.fmfelectric.com
T11
Thermo-magnetic type MCCB - High power
Rated Current (A) 250, 315, 350, 400, 500, 630 500, 630, 700, 800, 1250
4P 184-257-103-155 280-275-103-155
3P 5.7 9.5
Weight (kg)
4P 7.5 12.5
23
www.fmfelectric.com
T1
Air Circuit Breaker
T1-2000 T1-3200
Model of controller Voltage of shunt release Voltage of energy Voltage of electric Auxiliary contact
releasing electromagnet opertating mechanism
Operating Characteristics
T1-2000/3P 400A AC230V (fixed type 3-pole 400A voltage of control circuit (230V) default horizontal wiring, rated voltage
400V, M type controller, shunt 230V, electric operating mechanism 230V, standard 6 NO 6 NC contacts).
Please specify according to the above table if need other accesories.
24
www.fmfelectric.com
T1
Air Circuit Breaker
25
www.fmfelectric.com
T1
Air Circuit Breaker
26
www.fmfelectric.com
T1
Air Circuit Breaker
Outline and installation dimensions of fixed type circuit breaker (T1-2000, T1-2000/4)
Outline and installation dimensions of fixed type circuit breaker (T1-3200, T1-3200/4)
27
www.fmfelectric.com
T1
Air Circuit Breaker
Outline and installation dimensions of drawout type circuit breaker (T1-3200, T1-3200/4)
28
www.fmfelectric.com
T1
Air Circuit Breaker
29
www.fmfelectric.com
T1
Air Circuit Breaker
Outline and installation dimensions of drawout type circuit breaker (T1-6300, T1-6300/4, In=6300A)
30
www.fmfelectric.com
T1
Air Circuit Breaker - Accesories
Standard
Accesories
Electric
Accesories
31
www.fmfelectric.com
MCB Characteristics
32
www.fmfelectric.com
RCCB & RCBO Characteristics
33
www.fmfelectric.com
RCCB & RCBO Parameters and Properties
34
www.fmfelectric.com
Contactors
Contactors Sub-Index
C96 - Mini Contactor..............................................................................36
C98 - Contactor........................................................................................38
C98C - Contactor for Capacitor.............................................................45
RT - Thermal Overload Relay.............................................................47
C86 - DOL Electromagnetic Starter....................................................52
C96
Mini Contactor 6~12A
Description
36
www.fmfelectric.com
C96
Mini Contactor 6~12A
Technical Specification
C96 - 09/12
37
www.fmfelectric.com
C98
Contactor 9~95A
Description
38
www.fmfelectric.com
C98
Contactor 9~95A
Technical Specification
39
www.fmfelectric.com
C98
Contactor 9~95A
Technical Specification
Terminal connection
C98-09
C98-12
C98-18
C98-25
C98-32
C98-40
C98-50
C98-65
C98-80
C98-95
Curve
40
www.fmfelectric.com
C98
Contactor 9~95A
C98-09~32
C98-40~95
C98 - 09~12
C98 - 18
C98 - 25
C98 - 32
C98 - 4011~6511
C98 - 4004/4008~6504/6508
C98 - 8011~9511
C98 - 8004/8008~9504/9508
41
www.fmfelectric.com
C98
Contactor 115~1000A
Description
C98-265
AC Coil Operation
Volts (VAC) 24 36 42 48 110 127 220 230 240 380 415 440 480 500 600
DC Coil Operation
C98-630
42
www.fmfelectric.com
C98
Contactor 115~1000A
Technical Specification
C98-630
43
www.fmfelectric.com
C98
Contactor 115~1000A
Technical Specification
Terminal connection
Cabling cross section (Cu) Tightening
Model Number of Cable Cu busbar Screw torque
piece Cross section (mm2) Cross section (mm2) size (Nm)
C98-115 1 70~90 - M6 3
C98-150 1 70~90 - M8 6
C98-185 1 95~150 - M8 6
C98-225 1 95~150 - M10 10
C98-150 C98-265 1 120~185 - M10 10
C98-330 1 185~240 - M10 10
C98-400 1 (2) 240 (150) 30 x 5 M10 10
C98-500 2 150~185 40 x 5 M10 10
C98-630 2 185~240 50 x 5 M12 14
C98-800 2 185~240 50 x 5 M12 14
C98-400
44
www.fmfelectric.com
C98C
Capacitor Switching Contactor
Description
Electric value: AC 50/60Hz, up to 690V
Ambient temperature: -5°C ~ +40°C; the average during 24 hours should not
exceed +35°C
Altitude: 2000m
Atmosphere conditions: At mounting site, relative humidity not exceed 50% at the
max temperature of 40°C, higher relative humidity is
allowable under lower temperature.
For example, RH could be 90% at +20°C, special measures
should be taken to occurrence of dews.
Pollution degree: 3
Installation category: III
C98-12C Installation conditions: The inclination between the mounting plane and the
vertical plane is within ±5°
Impact and shake: The products should locate in places where there are no
obvious impact and shake
Technical Specification
C98-60C
45
www.fmfelectric.com
C98C
Capacitor Switching Contactor
C98C-12
C98-25C~60C
C98C-60
46
www.fmfelectric.com
RT
Thermal Overload Relay
Description
Feature
3-phase bimetal
Continuously readjustable current settings
Temperatures compensation
Tripping indicator
Test button
Stop button
Manual and automatic reset button
Electrically separated 1N/O plus 1N/C contact
Technical Specification
Protection property
47
www.fmfelectric.com
RT
Thermal Overload Relay
C98-09
C98-12
RT13 C98-18
C98-25
C98-32
RT23 C98-32
C98-40
C98-50
RT33 C98-65
C98-80
C98-95
48
www.fmfelectric.com
RT
Thermal Overload Relay
RT13
RT23
RT33
49
www.fmfelectric.com
Contactor Accesories
50
www.fmfelectric.com
Contactor Accesories
51
www.fmfelectric.com
C86
DOL Electromagnetic Starter
Description
C-86 Series Electromagnetic Starter ( “starter” for short hereinafter) applies
mainly to circuit with AC current of 50Hz (or 60Hz), rated operational voltage of 660V
and rated controlled power up to 15kW (current up to 32A) for using to control the
direct start and halt of the electromotor to protect the motor from overload and
phase failure.
Feature
3-phase bimetal
Continuously readjustable current settings
Temperature compensation
Tripping indicator
Test button
Stop button
Manual and automatic reset button
Electrically separated 1N/O plus 1N/C contact
Wiring Diagram
52
www.fmfelectric.com
C86
DOL Electromagnetic Starter
C98-09 RT-13
C98-18 RT-13
C98-25 RT-13
C98-32 RT-23
C98-40 RT-33
C98-50 RT-33
C98-65 RT-33
C98-80 RT-33
C98-95 RT-33
53
www.fmfelectric.com
Notes
54
www.fmfelectric.com
Protection
Protection Sub-Index
D16 - Surge Protective Device ................................................................. 56
G06 - Motor Protection Circuit Breaker................................................. 63
F1 - Modular Fuse Base........................................................................... 65
FL - Fuse Link.............................................................................................. 67
CM - Monitoring Relay.............................................................................. 68
D16
Surge Protective Device
56
www.fmfelectric.com
D16
Surge Protective Device T1+T2 50kAmp
Technical Data
57
www.fmfelectric.com
D16
Surge Protective Device T1+T2 60kAmp
Technical Data
58
www.fmfelectric.com
D16
Surge Protective Device T2 20kAmp
Technical Data
59
www.fmfelectric.com
D16
Surge Protective Device T2 40kAmp
Technical Data
60
www.fmfelectric.com
D16
Surge Protective Device
03 D16 2P 600 4 DC S
61
www.fmfelectric.com
D16
Surge Protective Device
No of
Modules 600 VDC 1000 VDC 1500 VDC
2 MODULES 03 D16 2P 600 4 DC 03 D16 2P 1000 4 DC -
3 MODULES - 03 D16 3P 1000 4 DC 03 D16 3P 1500 4 DC
Technical Data
62
www.fmfelectric.com
G06
Motor Protecction Circuit Breaker
Description
Operating Condition
Temperature: -5°C ~ +40°C
average temperature in 24 hours not exceed +35°C
Altitude: not exceed 2000m
Air conditions:
At mounting site, relative humidity not exceed 50% at the max temperature of +40°C,
higher relative humidity is allowable under lower temperature, for example: RH could be
90% ant +20°C
Pollution grade: Grade III
Release grade: 10A
Rated operational system: Continuous operational system
Mounting conditions:
The inclination between the mounting plane and the vertical plane shall
not exceed 5°. The product shall be installed and operated at a place without
obvious shake, impact and bribation.
Technical Specification
Protection property
63
www.fmfelectric.com
G06
Motor Protecction Circuit Breaker
0016
0025
0040
0063
0100
0160
0250
G06-32 0400
0630
1000
1400
1800
2300
2500
3200
Accessory
64
www.fmfelectric.com
F1
Modular Fuse Base
Technical Data
32A, 63A, 125A
General type F1.32, F1.63, F1.125
With Indicator type F1.L.32, F1.L.63, F1.L.125
1P, 2P, 3P, 4P, 1P+N, 3P+N
AC-22A
240/415V~
500V
50/60Hz
4.000V
1.500 Cycles
8.500 Cycles
120/H
IP20
F1.32 - F1.L.32 1,5Nm 14In-lbs
F1.63 - F1.L.63 2,5Nm 22In-lbs
F1.125 - F1.L.125 3,5Nm 30In-lbs
F1.32 - F1.L.32 16mm2 18-5AWG
F1.63 - F1.L.63 25mm2 18-3AWG
F1.125 - F1.L.125 50MM2 18-2AWG
-5°C ~ +40°C
-25°C ~ +70°C
On DIN rail EN60715 (35mm) by means of fast clip device
65
www.fmfelectric.com
F1
Modular Fuse Base
Specifications
F1.32.1N
1P+N 18 32A F110__ 10x38mm
F1.L.32.1N
F1.32
1-4P, 3P+N 18 32A F110__, FL10__DC 10x38mm
F1.L.32
F1.63
1-4P, 3P+N 27 63A F114__ 14x51mm
F1.L.63
F1.125
1-4P, 3P+N 35 125A F122__ 22x58mm
F1.L.125
Size A1 A2 B H1 H1
F1.63
108 111 27 76 100
F1.L.63
F1.125
127 128 35 77 104
F1.L.125
66
www.fmfelectric.com
FL
Fuse Link
Technical Data
Specifications
67
www.fmfelectric.com
CM
Monitoring Voltage Relay
1. Cut off the line when Over & Under Voltage occurs,
and automatically reset and connect the line after
returning to normal without manual operation.
03CMV8010
Single Phase
SPDT
0 ~ 20%
0 ~ 20%
0.1 ~ 10s
-
-
AC 110V or 220V
50/60Hz
0.5s
AC-15:3A / 250VAC
-10°C ~ +55°C
±2% MAX
±2% MAX
: in (mm)
68
www.fmfelectric.com
CM
Monitoring Voltage Relay
1. Cut off the line when Over & Under Voltage occurs,
and automatically reset and connect the line after
returning to normal without manual operation.
03CMV80301/2/3
Three Phase
SPDT
0 ~ 20%
0 ~ 20%
0.1 ~ 10s
¦
¦
AC 220V, 380V, 400V, 415V, 440V
50/60Hz
0.5s
AC-15:3A / 250VAC
-10°C ~ +55°C
±2% MAX
±2% MAX
: in (mm)
69
www.fmfelectric.com
CM
Monitoring Voltage Relay
1. Cut off the line when Over & Under Voltage occurs,
and automatically reset and connect the line after
returning to normal without manual operation.
03CMV80304
3 Phase 3 wire
SPDT
-
-
3s
-
¦
Wide Voltage> AC 220 - 480V
50/60Hz
0.5s
AC-15:3A / 250VAC
-10°C ~ +55°C
±2% MAX
±2% MAX
: in (mm)
70
www.fmfelectric.com
CM
Monitoring Voltage Relay
1. Cut off the line when Over & Under Voltage occurs,
and automatically reset and connect the line after
returning to normal without manual operation.
71
www.fmfelectric.com
CM
Monitoring Voltage Relay
03CMI801
Dimensions: in (mm)
72
www.fmfelectric.com
CM
Voltage Protector
General
Applications
Overvoltage and undervoltage protection for household equipment.
Function Features
Supply voltage measurement and protection.
Double bus wiring design stronger ability.
Self reset after fault.
Relay status is indicated by LED.
1-MODULE, DIN rail mounting.
Frame size
CMV8 self-resettingover-voltage protection
Note:4P products such as the need to phase protection function can be customized.
Technical parameters
Technical parameters 2P 4P
Rated supply voltage AC220V AC220V(L-N)
Rated supply frequency 50/60Hz
Rated operational current 32A, 40A, 50A, 63A (AC1)
Burden AC max.3VA
Over voltage operation value 265V 265V (L-N)
Over voltage reset value 257V 257V(L-N)
Under voltage operation value 175V 175V(L-N)
Under voltage reset value 180V 180V(L-N)
Action delay time 1s
Power up delay 2s
Reset time 30s
Measurement error 1%
Operating temperature -20 to +55 -4 to 131
Storage temperature -35 to +75 -22 to 158
Mounting/DIN rail Din rail EN/IEC 60715
Protection degree IP40 for front panel/IP20 terminals
Operating position any
Overvoltage cathegory
Pollution degree 2
Dimensions 82 36 68mm 82 72 68mm
Weight 120g 250g
Standards EN 60255-1,IEC60947-5-1
Wiring Diagram
2P 4P
N 2 N 1 N 2 4 6 N 1 3 5
73
www.fmfelectric.com
CM
Voltage Protector
Functions Diagram
U
LED:Un
LED: Fault(>U)
LED: Fault(<U)
Ts Power-up delay
Ts Tt Tr Tt Tr <Tt <Tt Tt Action delay time
11-14 Tr Reset delay time
Dimensions (mm)
N N
N 2 N 2 4 6
CMV8 N 1 CMV8 N 1 3 5
40A 63A
>U:265V 3V >U:265V 3V
Un Un
82
<U:175V 2V <U:175V 2V
Fault Fault
>U: >U:
<U: <U:
N IN N IN
Example
AC220V
N L
N
N 2
Power on delay:2s
Reset delay:30s
Fault
>U:
<U:
N IN
74
www.fmfelectric.com
Distribution
Distribution Sub-Index
DB1 - Distribution Box IP30..................................................................... 76
DB2 - Distribution Box IP40 .................................................................... 77
DB4 - Distribution Box IP65..................................................................... 79
DB7 - Distribution Box Steel....................................................................80
B - Terminal Block ..................................................................................81
BD - Terminal Box.....................................................................................94
PG - Waterproof Connector..................................................................96
DB1
Distribution box
DB11P
DB12P
DB14P
DB16P
DB18P
DB112P
DB118P
76
www.fmfelectric.com
DB2
Distribution box
DB2S2 DB2S2V
DB2S3 DB2S3V
DB2S4 DB2S4V
DB2S6 DB2S6V
DB2S8 DB2S8V
DB2S10 DB2S10V
DB2S12 DB2S12V
DB2S15 DB2S15V
DB2S18 DB2S18V
DB2S24 DB2S24V
DB2S36 DB2S36V
DB2F2 DB2F2V
DB2F3 DB2F3V
DB2F4 DB2F4V
DB2F6 DB2F6V
DB2F8 DB2F8V
DB2F10 DB2F10V
DB2F12 DB2F12V
DB2F15 DB2F15V
DB2F18 DB2F18V
DB2F24 DB2F24V
DB2F36 DB2F36V
77
www.fmfelectric.com
DB2
Distribution Box
DB2S4T2 DB2S4VT2
DB2S6T2 DB2S6VT2
DB2S8T2 DB2S8VT2
DB2S12T2 DB2S12VT2
DB2S18T2 DB2S18VT2
DB2S24T2 DB2S24VT2
DB2S36T2 DB2S36VT2
DB2F4T2 DB2F4VT2
DB2F6T2 DB2F6VT2
DB2F8T2 DB2F8VT2
DB2F12T2 DB2F12VT2
DB2S18T2 DB2F18VT2
DB2F24T2 DB2F24VT2
DB2F36T2 DB2F36VT2
78
www.fmfelectric.com
DB4
Distribution Box
DB4P4R
DB4P6R
DB4P8R
DB4P9R
DB4P12R
DB4P18R
DB4P24R
DB4P4RT
DB4P6RT
DB4P8RT
DB4P9RT
DB4P12RT
DB4P18RT
DB4P24RT
79
www.fmfelectric.com
DB7
Distribution Box
DB7113
DB7226
DB7339
DB7452
DB7118
DB7236
DB7354
DB7472
DB7690
DB7122
DB7244
DB7366
DB7488
DB75110
80
www.fmfelectric.com
B
Universal Terminal Block
81
www.fmfelectric.com
B
Universal Terminal Block
82
www.fmfelectric.com
B
Universal Terminal Block
83
www.fmfelectric.com
B
High Current Terminal Block
84
www.fmfelectric.com
B
Ground Terminal Block
85
www.fmfelectric.com
B
Ground Terminal Block
86
www.fmfelectric.com
B
GroundTerminal Block
87
www.fmfelectric.com
B
Universal Terminal Block
88
www.fmfelectric.com
B
Universal Terminal Block
89
www.fmfelectric.com
B
Universal Terminal Block
90
www.fmfelectric.com
B
Universal Terminal Block
91
www.fmfelectric.com
B
Universal Terminal Block
92
www.fmfelectric.com
B
Universal Terminal Block
93
www.fmfelectric.com
BD
Terminal Box
94
www.fmfelectric.com
BD
Terminal Box
95
www.fmfelectric.com
PG
Waterproof Connector
96
www.fmfelectric.com
PG
Waterproof Connector
97
www.fmfelectric.com
Notes
98
www.fmfelectric.com
Climate Control
TC / TR
Thermostat (normally closed); contact breaker for regulating heaters. The contact opens when
temperature is rising.
Thermostat (normally open); contact maker for regulating of filter fans and heat exchangers or for
switching signal devises when temperature limit has been exceeded. The contact closes when
temperature is rising.
Technical Data
TC / TR
Switch temperature difference +/-5°C
Sensor element thermostatic bimetal
Contact type snap-action contact
Service life >100,000 cycles
LN
100
www.fmfelectric.com
CL.TH
Mechanical Hygrostat - Regulating
TH
The electromechanical hygrostat is designed to control enclosure heaters so that the dew point is raised
when a critical relative humidity of 65% is exceeded. In this way condensation and corrosion in
enclosures with electric/electronic components is effectively prevented.
Technical Data
TH
Switch difference¹ +/-5% RH
Permissible air velocity 15m/sec.
Contact type change-over contact
Service life >50,000 cycles
Min. switching capacity 20VAC / DC 100mA
Max. switching capacity 250VAC, 5A / DC 20W
Connection 3-pole terminal for 2.5mm², clamping torque 0.5Nm max.:
50
rigid wire 2.5mm² (AWG 14); stranded wire² 1.5mm² (AWG 16)
Mounting clip for 35mm DIN rail, EN 60715
Casing plastic according to UL94 V-0, light grey
Dimensions 67 x 50 x 38mm
38 Weight approx. 60g
Fitting position variable
Operating/Storage temperature 0 to +60°C (+32 to +140°F) / -40 to +60°C (-40 to +140°F)
Operating/Storage humidity max. 95% RH (non-condensing)
67
¹ at 50% RH
² When connecting with stranded wires, wire end ferrules must be used.
LN
101
www.fmfelectric.com
CL.TH
Electronic Hygrostat - Regulating
TH
The electronic hygrostat is designed to control enclosure heaters so that the dew point is raised when a
critical relative humidity of 65% is exceeded. In this way condensation and corrosion in enclosures
with electric/electronic components is effectively prevented.
Technical Data
TH
Switch difference 5% RH (±3% RH tolerance) at +25°C (+77°F), 50% RH
Reaction time 5 sec.
Contact type change-over contact (relay)
Service life >50,000 cycles
Max. switching capacity (relay output) 240VAC / 120VAC 8 (1.6) A
42.5 Max. inrush current AC 16A for 10 sec.
Optical Indicator LED
Connection1 5-pole terminal, clamping torque 0.5Nm max.:
rigid/stranded wire 2.5mm² (AWG 14);
38
50
60 70
80
Weight approx. 70g
40 90
%rF/RH
Fitting position variable
Operating/Storage temperature 0 to +60°C (+32 to +140°F) / -20 to +70°C (-4 to +158°F)
64.5
60 70
50 80
40 90
%rF/RH
1 2 4 5 LN
102
www.fmfelectric.com
CL.R
Semiconductor Heater - Heating
These heaters are used in enclosures where damage from condensation must be prevented, or where
the temperature may not fall below a minimum value. The aluminium profile heater body design has a
chimney effect and distributes the heat evently. The heaters are designed for permanent operation.
Pressure clamb connectors save time and simplify installation.
Technical Data
RC1
Operating voltage 120-260V AC/DC or 12V DC or 24V DC or 48V DC¹ (min. 110 V, max. 265 V)
Heating element PTC resistor - temperature limiting
Heater body extruded aluminium profile, anodised
Connection 3 pressure clamps for stranded wire 0.5-1.5mm² (with wire end
ferrule) and rigid wire 0.5- 2.5mm²
Connection casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / I (earthed)
Accessoires screw fixing
Note other voltages on request
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Example of connection
Heater RC1
Thermostat TC
30
20 40
61±0.5 10 50
0 60 °C
56±0.5
64±0.5
103
www.fmfelectric.com
CL.R
Touch-Safe Small Heater (Semiconductor) - Heating
The heaters are used in enclosures where condensation is to be prevented or the temperature may
not fall below a minimum value. In this way corrosion is avoided and an even temperature is ensured.
The heaters are designed for permanent operation.
Technical Data
RC2
Operating voltage 120-260V AC/DC¹ (min. 110V, max. 265V)
Heating element PTC resistor - temperature limiting
Surface temperature < +85°C (+185°F) (according to VDE 0100), except upper protective
Fast Fixing Part grille
Connection 2-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45°C to +70°C (-49°F to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request
38.38 ¹ Operating with voltages below 140V AC/DC reduces heating performance by approx 10%.
Examples of connection
75.85
Heater RC2
10.08
Thermostat
TC
38.37 75.85
30
20 40
10 50
0 60 °C
107.55
98.59
L
N
10.08 24.70
Art. No. Heating capacity² Dimensions Weight (approx.)
69.09
CL.RC2.10W 10W 96 x 38 x 79mm 0.2kg
CL.RC2.20W 20W 96 x 38 x 79mm 0.3kg
CL.RC2.30W 30W 96 x 38 x 79mm 0.3kg
104
www.fmfelectric.com
CL.R
Touch-Safe Heater (semiconductor) with Fast Fixing part - Heating
Touch-safe heater for the use in enclosures with electrical/electronical components. The design of the
heater supports the natural convection which results in a high air-current of warm air. The surface
temperatures on the accessible side surfaces of the housing are kept down as a result of the heater
design. Our complete range of thermostats and hygrostats can directly be connected to the heater
RC2. This heater is also available in a version with plug-in thermostat requiring no additional wiring.
The heaters are designed for permanent operation.
Technical Data
RC2
Operating voltage 120-260V AC/DC¹ (min. 110V, max. 265V)
Fast Fixing Part
Heating element PTC resistor - temperature limiting
Surface temperature < +80°C (+176°F), except upper protective grille
Connection 4-pole terminal 2.5mm², torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715
Fitting position vertical airflow (air outlet up, connection on bottom)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request
¹ Operating with voltages below 140V AC/DC reduces heating performance by approx. 10%.
Examples of connection
Heater RC2
Thermostat
60
TC
30
20 40
10 50
0 60 °C
90
AC L
N
L
Art. No. Heating capacity² Air outlet temperature³ Dimensions Weight (approx.)
CL.RC2.50W 50W +86°C (+186.8°F) 110 x 60 x 90mm 0.3kg
CL.RC2.100W 100W +120°C (+248°F) 150 x 60 x 90mm 0.4kg
CL.RC2.150W 150W +145°C (+293°F) 150 x 60 x 90mm 0.4kg
105
www.fmfelectric.com
CL.R
Touch-Safe Heater (semiconductor) with Fast Fixing part - Heating
Fan heater prevents formation of condensation and provides an evently distributed interior air
temperature in enclousures with electric/electronic components. The heater is connected using the
internal terminal connectors. The small size of the RC3 makes it ideal for use in enclousures where
space is at a premium.
Technical Data
RC3
Operating voltage 120V AC or 230V AC or 120 & 230V AC
Heating element PTC resistor - temperature limiting
Surface temperature 150W/250W: max +50°C (+122°F), 400W: max +65°C (+149°F)
each except upper protective grille at +20°C (+68°F) ambient temp.
Axial fan, ball bearing air flow, free flow
45m3/h (230VAC), 54m3/h (120VAC)
service life 40.000h at +40°C (+104°F)
Connection 2-pole clamp max 2.5mm², clamping screw
torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715 or screw fixing (Ø5.3mm)
Fitting position vertical airflow (air outlet up)
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Note other voltages on request
Examples of connection
30
20 40
10 50
0 60 °C
L
N Temperature (°C)
106
www.fmfelectric.com
CL.R
Touch-Safe Heater (semiconductor) with Fast Fixing part - Heating
The compact high performance fan heater prevents formation of condensation and frost and provides
an evently distributed interior air temperature in enclousures with electric/electronic components. The
plastic housting provides double insulation and acts as protection against contact. The fan heater is
available with integrated thermostat for temperature control. The RC4 was designed as a stationary unit
for wall fixing. For fixing on the bottom of the enclousure the fan heater RC4 is recommended.
Technical Data
RC4
Heating element PTC resistor - temperature limiting
Temperature safety cut-out to protect against overheating in case of fan failure, automatic reset
Axial fan, ball bearing air flow 160m3/h, free flow
service life 50.000h at +25°C (+77°F)
Connection 2-pole max. 2.5mm2, clamping screw with strain relief,
torque 0.8Nm max.
Casing plastic according to UL94 V-0, black
Mounting clip for 35mm DIN rail, EN 60715 or screw fixing (M6)
Fitting position vertical airflow (air outlet up) - other fitting positions possible
Dimensions 182 x 160 x 120mm
Weight approx. 1.3kg
Operating/Storage temperature -45 to +70°C (-49 to +158°F)
Operating/Storage humidity max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Examples of connection
107
www.fmfelectric.com
CL.V
Fan Filter IP54 - Buckle Lock Door Type - Ventilating
Fan filters are used to provide an optimum climate in enclousures and cabinets with electrical/electronic
components. The interior temperature of an enclousure can be reduced by channelling cooler filtered
outside air into the enclousure thus expelling heated internal air. The resulting airflow prevents formation
of localised hot pockets in installations and protects electronic components from overheating.
The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high degree
of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. It is a
standard installation with a filter fan in the lower part of the enclousure which ensures that fresh air is out
of the enclousure (airflow direction “OUT”).
This system consists of a filter fan and exit filter.
26.1 50
Technical Data
VCF.120
Axial fan, ball bearing service life L10 at +40°C (+104°F): min. 50,000h
92.7
80
115.6 ¹ Drilling marks for screw mounting are indicated on mounting frame.
93
Exit Filter VF.120
Art. No. Operating Air outlet Depth in Weight
voltage enclousure (approx.)
CL.VF.120 - air-flap outlet technology 29mm 0.2kg
93
Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No.
here not show.
Enclosure cut-out Please inquiry to us by email, we will offer to you by email: info@fmfelectric.com .
108
www.fmfelectric.com
CL.V
Fan Filter IP54 - Buckle Lock Door Type - Ventilating
Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic
components. The interior temperature of an enclosure can be reduced by channelling coller filtered
outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation
of localised hot pockets in installation and protects electronic components from overheating.
The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high
degree of airflow. A ratche mechanism is used for mounting and provides high stability and tightness. It
is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is
out of the enclosure (airflow direction “OUT”). This system consists of a filter fan and exit filter.
26.1 50
Technical Data
120
VCF.152
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 37,000 h
fan body aluminium, rotor metal
Connection 2 stranded wires, 160mm
20.97
Casing, hood, flaps New ABS confirm to RoHS
151.4
Enclosure cut-out 125 x 125+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness
1-4mm). Additional use of screws possible if needed1
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to
152.03
147
Note other voltages on request
Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No.
here not show.
Please inquiry to us by email, we will offer to you by email: info@fmfelectric.com .
Enclosure cut-out
109
www.fmfelectric.com
CL.V
Fan Filter IP54 - Buckle Lock Door Type - Ventilating
Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic
components. The interior temperature of an enclosure can be reduced by channelling coller filtered
outside air into the enclosure thus expelling heated internal air. The resulting airflow prevents formation
of localised hot pockets in installations and protects electronic components from overheating.
The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high
degree of airflow. A ratchet mechanism is used for mounting and provides high stability and tightness. It
is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is
out of the enclosure (airflow direction “OUT”). This system consists of a filter fan and exit filter.
44.5 50
Technical Data
117.84
120
VCF.204
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 65,000 h
fan body aluminium, rotor metal
Connection 3 pole clamp for 2.5mm2, clamping torque 0.8Nm max.
23.09
Casing, hood, flaps New ABS confirm to RoHS
203.5
Enclosure cut-out 177 x 177+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness
1-4mm). Additional use of screws possible if needed1
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to
203.5
Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No.
here not show.
Please inquiry to us by email, we will offer to you by email: info@fmfelectric.com .
Enclosure cut-out
110
www.fmfelectric.com
CL.V
Fan Filter IP54 - Buckle Lock Door Type - Ventilating
Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic
components. The interior temperature of an enclosure can be reduced by channelling coller filtered
outside air into the enclosure thus expelling internal air. The resulting airflow prevents formation of
localised hot pockets in installation and protects electronic components from overheating.
The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high
degree of airflow. A ratche mechanism is used for mounting and provides high stability and tightness. It
is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is
out of the enclosure (airflow direction “OUT”). This system consists of a filter fan and exit filter.
49.5 53
Technical Data
VCF.255
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 56,000 h
rotor metal
Connection 3-pole clamp for 2.5mm2, clamping torque 0.8Nm max.
23.5 Casing, hood, flaps New ABS confirm to RoHS
254.5
Enclosure cut-out 230 x 230+1 mm
Mounting frame 4 built-in ratchet braces for mounting (6 notches for wall thickness
1-4mm). Additional use of screws possible if needed1
Filter mat G4 acc. to DIN EN 779, filtering degree 94%
Filter material synthetic fibre with progressive construction, temperature resistant to
254.5
Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No.
here not show.
Please inquiry to us by email, we will offer to you by email: info@fmfelectric.com .
Enclosure cut-out
111
www.fmfelectric.com
CL.V
Fan Filter IP54 - Buckle Lock Door Type - Ventilating
Fan filters are used to provide an optimum climate in enclosures and cabinets with electrical/electronic
components. The interior temperature of an enclosure can be reduced by channelling coller filtered
outside air into the enclosure thus expelling internal air. The resulting airflow prevents formation of
localised hot pockets in installation and protects electronic components from overheating.
The Fan filter series uses a new air-flap outlet technology for the air outlet and thus reaches a high
degree of airflow. A ratche mechanism is used for mounting and provides high stability and tightness. It
is a standard installation with a filter fan in the lower part of the enclosure which ensures that fresh air is
out of the enclosure (airflow direction “OUT”). This system consists of a filter fan and exit filter.
49.5 53
Technical Data
VCF.323
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 65,000 h
fan body aluminium, rotor metal
Connection 3 pole clamp for 2.5mm2, clamping torque 0.8Nm max.
Casing, hood, flaps New ABS confirm to RoHS
23.5
Note: We can offer 230VAC, 110VAC, 24VDC, 12VDC, 400VAC, 120&230VAC Fan Filter, for more Art No.
here not show.
Please inquiry to us by email, we will offer to you by email: info@fmfelectric.com .
Enclosure cut-out
112
www.fmfelectric.com
CL.V
Fan Filter IP55 - Roof fan - Ventilating
Technical Data
VCF.323
Axial fan, ball bearing service life L10 at +40 °C (+104 °F): min. 50,000 h rotor metal
Connection 3 pole clamp for 2.5mm2, clamping torque 0.8Nm max.
Dimensions 400x135x400 mm
Enclosure cut-out 258 x 258+1 mm
Centrifugal Fan Capacitive motor
Filter mat G4
Filter material ABS
Operating temperature 50 Hz: -25 to +55°C (-13 to +131°F); 60 Hz: -25 to +35°C (-13 to +95°F)
Storage temperature -40 to +70°C (-40 to +158°F)
Operating/Storage humidity max. 75% RH (non-condensing)
Protection type/Protection class without filter mat: IP22, with filter mat: IP55
399.00
Technical Parameters
Model Power Air Flow Rate Air Flow Rate Power Current Noise
Supply (free blow) (free blow) Consumption Consumption Level
No filter mat (m3/h) With filter mat (m3/h) (W) (A) (dBA)
CL.VCF.T.230A 230VAC 570/620 430/465 60/71 0.28/0.31 71
CL.VCF.T.230B 230VAC 860/900 675/702 98/118 0.46/0.51 74
396.00
Enclosure cut-out
113
www.fmfelectric.com
CL.I
Lamp - Accesories
LED 025
The lamp series LED 025 is suitable for all types of panels and enclosures, especially where space
is at a premium. The lamps have a very long service life thanks to the use of LED technology. Three
different fixing options provide more flexibility for installation. The power output allowsup to 10
lamps to be connected to each other (12VDC versions up to 5 lamps). Both the power input and
output connectors snap lock into their sockets. With the integrated power unit and the plugs the lamp
con quickly be connected.
Technical Data
LED 025
Power consumption max. 5W
Luminosity 400Lm at 120° (1,200Lm at 360° or equivalent 95W light bulb)
Lamp type LED, angle of radiation 120°
light color: daylight, color temperature: 6,000K to 7,000K
Service life 60,000h at +20°C (+68°F)
Connection 2-pole connector with snap lock
AC: max. 2.5A / 240VAC, color: white
DC: max. 2.5A / 60VDC, color: blue
Mounting magnet fixing or screw fixing (M5), clip fixing (M6),
torque 2Nm max.
Casing plastic, transparent
Dimensions see drawings
Weight 0.2kg
Operating/Storage temperature -30 to +60°C (-22 to +140°F) / -40 to +85°C (-40 to +185°F)
Operating/Storage humidty max. 90% RH (non-condensing)
Protection type/Protection class IP20 / II (double insulated)
Mounting options: The lamps are available with magnet fixing for easy positioning in any steel
cabinet or enclosure. A classic is the LED025 with screw fixing. The clip holders exclusively designed
for clip fixing of the LED025 can be positioned anywhere in the cabinet by simply screwing the holders
to the cabinet wall. The lamp is snapped into the clip holders and can be turned in both directions.
With a total rotation angle of 180° it provides perfect illumination within the cabinet or enclosure.
250
351
325
47.3
41
34
36
42
52 52
40 40
114
www.fmfelectric.com
CL.I
Lamp - Accesories
CONNECTION EXAMPLE
44 351 44
This illustration shows the LED 025 lamp in a daisy chain application. The lamps are conveniently
connected via quick connection plugs – up to 10 (5) lamps max. can be daisy-chained this way. The snap
lock connectors ensure a stable electrical connection even if subjected to heavy vibration. The connec-
tion example shows a 230VAC application, using the following cables: connection cable with female
connector, Art. No. 244356 (1); daisy chain extension cable with 2 connectors, Art. No. 244358 (2).
115
www.fmfelectric.com
CL.A
Door switch
The door switch monitors the position of cabinet doors and is available in three versions.
For example, it can be used for switching a light when opening a door (NC), or to activate a fan when
closing a door (NO). The version with change-over contact (CO) can be used as a normally closed
and/or normally open contact.
The wide mechanical adjustment range of the door switch CL.A.DS013 offers versatile application
areas: the housing is adjustable within a 35mm range, while the screw flange with a slotted hole offers
an additional 21mm. The switching travel of the switch itself is another 8mm.
Connection Diagram
CO
NC NO
29.65
86.24 2 1 4
2 1 1
51.00
N M
N N
L
L L
49.96 63.92
116
www.fmfelectric.com
Signaling, Control & Switch
Protection Sub-Index
L05 - Led Indicator.....................118 MF - Modular contactors....................143
P05 - Pushbutton switch.......... 119 T8 - Time relays....................................146
R05 - Rotary switch .................. 130 M8 - Memory & Latching relays....... 156
HL - Changeover switch ....... 133 L8 - Level Control relays.................... 162
D2 - Isolation switch............... 134 TM - Timer relay.................................... 166
SL - Modular signal lamp ... 135 E05 - Modular socket............................ 165
MVA - Modular meters ............. 136 F8 - Light Activated Switch............... 168
EB - Modular bell ................... 138 FS - Switching Power Supply ........... 169
LR - Impulse relays................. 140
L05
LED Indicator Product Information
LED INDICATOR
Application
L05 Series indicator lights are used in the telecommunica-
tion and electrical circuit of AC 50Hz or 60 Hz, rated working
voltage 380V and below DC working voltage 220V or below
for indicator signal, accident signal, fault signal and other
indicator signals, they meet with standard: IEC60947-5-1.
118
www.fmfelectric.com
L05
LED Indicator
06L0511
06L051213
06L051214
06L051301
06L051300
119
www.fmfelectric.com
L05
LED Indicator
Working Condition
Ambient temperature: -10 ~ +55°c
Working pressure: 80-106KPa
Air relative humidity: 10-80% (no condensation)
Sunniness: no sunniness
ij29
White
7Max
13
Green
Ø 22
LED Voltage Meter 06L05210 Red AC80-500V
38
Yellow
Blue
ij21
ij30
White
7Max
13
Green
Ø 22
LED Voltage Meter 06L05220 Red AC80-500V
41
Yellow
Blue
ij21
120
www.fmfelectric.com
P05
Pushbutton switch
50 x 104
121
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
122
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
123
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
124
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
125
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
126
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
127
www.fmfelectric.com
P05
Pushbutton switch - Ø22mm
128
www.fmfelectric.com
P05
Pushbutton Switch & Indicator - Ø22mm
Black 06P05CB2EA121
13
N/O Green 06P05CB2EA131
11
Yellow 06P05CB2EA151
Pushbutton Blue 06P05CB2EA161 500
srping return
N/C 21
Red 06P05CB2EA142
22
Black 06P05CB2EA125
11 13 Green 06P05CB2EA135
Pushbutton
N/O+N/C 500
srping return 22 21
Red 06P05CB2EA145
Yellow 06P05CB2EA155
Black 06P05CB2EH121
13
N/O Green 06P05CB2EH131
11
Yellow 06P05CB2EH151
Pushbutton 21
N/C Red 06P05CB2EH142
Latching 22 500
11 13 Black 06P05CB2EH125
N/O+N/C
22 21 Green 06P05CB2EH135
Rec 06P05CB2EH145
129
www.fmfelectric.com
R05
Rotary switch
Introduction
The R05S26 series rotary switch mainly applies to 440V and below,
AC 50Hz or 240V and below DC circuits. For breaking and closing,
change-over of circuits under unfrequently manual operation. And
the typical applications are: control switch of 3 phase motors, control
R05S2610 switch of switchgear, control switch of instruments, and change-over
switch of machinery and welding machine.
Working conditions
Ambient temperature do not exceed 40°C, and the average
temperature, measures over period of 24 hours, do not exceed 35°C.
R05S2625 Ambient temperature should not be below -25°C.
Should not be installed over 2000 m above sea level.
The humidity should not exceed 50% when the ambient
temperature is 40°C, higher humidity is allowed for lower
temperature.
Installation conditions
A clean environment is requiered.
R05S2632 Please follow the instructions in the installation manual.
Classification
1. Classified by utilization
Change-over switch
Motor switch
Control switch
2. Classified by operation
Limited movement
R05S2663 Spring return
Limited movement with spring return
R05S26125
130
www.fmfelectric.com
R05
Rotary switch
R05S26160
R05S26315
R05S2610
R05S2620
R05S2625
R05S2632
R05S2663
R05S26125
R05S26160
R05S26315
Re: n for number of layers.
131
www.fmfelectric.com
R05
Rotary switch
132
www.fmfelectric.com
HL
Changeover Switch
Changeover switch
Technical Data
Application The Changeover Swith can switch on, load and break the circuit under normal conditions, using as Switch
Disconectors.
Construction
and
Features
Electrical
Features
Circuit
Diagram
133
www.fmfelectric.com
D2
Isotation Switch
Modular Socket
Technical Data
Electrical Rated current In 32, 40, 50, 63, 80, 100, 125A
Features Poles 1P, 2P, 3P, 4P
Rated voltage Ue 240/415V~
Insulation voltage Ui 500V
Rated frequency 50/60Hz
Rated short-time withstand current Icw 12Ie,1s
Rated making and breaking capacity 3Ie, 1.05Ue, cos =0.65
Rated short circuit making capacity 20Ie, t=0.1s
Rated impulse withstand voltage (1.5/50) Uimp 4,000V
Dielectric test voltage at ind.Freq. for 1 min 2.5kV
Utilization category AC - 22A
Side A
35
45
83
21.3
18 18
36
54 69.6
72
134
www.fmfelectric.com
SL
Modular Signal Lamp
Technical Data
Application The Modular Signal Lamp is applicable to circuits with rated voltage 230V~ and frequency 50/60Hz for visual
indication and signaling.
Construction
and
Features
Electrical
Features
SL1 - SL3
Signal lamp
Circuit
Diagram
136
www.fmfelectric.com
MVA
Modular meters
MVA3 MVA1
Technical Data
MVA1
MVA3
Electrical
Features
Working
Conditions
Installation
136
www.fmfelectric.com
MVA
Modular Digital Meters
137
www.fmfelectric.com
EB
Modular Electric Bell
Bell transformer
Technical Data
Application Applicable to circuits with rated voltage 230V~ and rated frequency 50/60Hz, used to poewr electric bell of
extra low voltage.
Construction
and
Features
Electrical
Features
138
www.fmfelectric.com
EB
Modular Electric Bell
Electric Bell
Technical Data
Application The electric bell is suitable for audible signaling for intermittent use only in domestic and commercial
installations..
Construction
and
Features
Electrical
Features
139
www.fmfelectric.com
LR
Impulse Relays
Impulse Relays
Technical Data
Application The Impulse Relays are used to control, by means of pushbuttons, lighting circuits consisting of:
Ϸ Incandescent lamps, low-voltage halogen lamps, etc. (resistive loads)Rated Current In:
Ϸ Fluorescent lamps, discharge lamps, etc. (Inductive loads).
Features Ϸ Closing of the impulse relay pole(s) is triggered by an impulse on the coil.
Ϸ Having two stable mechanical positions, the pole(s) will be opened by the next impulse. Each impulse
received by the coil reverses the position of the pole(s).
Ϸ Can be controlled by an unlimited number of pushbuttons.
Ϸ Zero energy consumption.
Yellow Clip
Insulated terminals IP20.
A simple clip-on system
for flexible auxiliaries
combination and improved
robustness.
For electrical and
mechanical connections.
Built-in or optional auxiliary
function: state indication,
centralized control, latched
control, control for illuminated
pushbutton, step-by-step
control, time delay.
Standard LR16
140
www.fmfelectric.com
LR
Impulse Realys
LR16 16A
Operation
Technical
Data
141
www.fmfelectric.com
LR
Impulse Relays
Technical Data
Security
142
www.fmfelectric.com
MF
Modular Contactor
Automatic
type
Manual
type
Technical Data
Electrical 1P, 2P 250V AC
Features Voltage rating Ue
3P, 4P 400V AC
Frequency 50/60Hz
Endurance (O-C)
Electrical life 100,000
Maximum number of switching operation a day 100
Additional characteristics
Insulation voltage Ui 500V AC
Pollution degree 2
Rated impulse withstand voltage Uimp 2.5kV (4kV @12/24/48VAC)
Degree of protection IP20
(IEC 60529) IP40
Operating temperature -5°C ~ +60°C (1)
Storage temperature -40°C ~ +70°C
Tropicalization (IEC 60068-1) Treatment 2 (relative humidity 95% at 55°C)
ELSV compliance (Extra Low Safety Voltage) for 12/24/48VAC versions
The product control conforms to the SELV (Safety Extra Low Voltage) requirements
(1)
In the case of contactors mounting in an enclosure for which the interior temperature
is in range between 50°C and 60°C, it is necessary to use a spacer between each
contactor.
143
www.fmfelectric.com
MF
Modular Contactor
1.5~2.5mm2 1.5~2.5mm2
16-100A Control
PZ1:4MM 9mm 0.8N.m 2x1.5mm2 2x2.5mm2
MF 16~25A 1.5~6mm2 1~4mm2
40A-63A Power 6~25mm 2
6~16mm2
PZ2:6MM 14mm 3.5N.m
2
100A 6x3.5mm 6x35mm2
± 30°
Spacer cat
IP 20 IP 40
Consumption
144
www.fmfelectric.com
MF
Modular Contactor
Manual
Rating (In) Consumption
Control
Control voltage (VAC) (50/60Hz) Max. power
Contactors
AC-7a AC-7b Holding Inrush
50Hz
25A 9A 230...240 2.7VA 9.2VA 1.2W
2P 40A 18A 220...240 4.6VA 34VA 1.6W
63A 25A 220...240 4.6VA 34VA 1.6W
25A 9A 220...240 4.6VA 34VA 1.6W
4P 40A 18A 220...240 6.5VA 53VA 2.1W
63A 25A 220...240 6.5VA 53VA 2.1W
Circuit
Diagram A1 R1 R3 A1 R1 A1
A2 R2 R4 A2 R2 A2
A1 A1 R1 R3 R5 R7 A1 R1 R3 A1 R1
A2 A2 R2 R4 R6 R8 A2 R2 R4 A2 R2
66 66
49 49
18 36 5.5 36 54 5.4
81 45 85 45
4 4
MF.16/20/25A MF.32/40/63A
73 73
66 66
49 49
18 36 5.4 36 54 5.4
81 45 81 45
4 4
145
www.fmfelectric.com
T8
Time Relay
Application:
• Industrial machinery
• Illumination
• Manufacturing
• HVAC Systems
• Food and agriculture
146
www.fmfelectric.com
T8
Time Relay
Application:
• Industrial machinery
• Illumination
• Manufacturing
• HVAC Systems
• Food and agriculture
147
www.fmfelectric.com
T8
Time Relay
Application:
• Industrial machinery
• Illumination
• Manufacturing
• HVAC Systems
• Food and agriculture
148
www.fmfelectric.com
T8
Time Relay
Application:
• Industrial machinery
• Illumination
• Manufacturing
• HVAC Systems
• Food and agriculture
149
www.fmfelectric.com
T8
Time Relay
A
On Delay Power On
B
Repeat Cycle Starting Off
C
Interval Power On
D
Off Delay S Break
E
Retriggerable One Shot
F
Repeat Cycle Starting On
G
Pulse Generator
H
One Shot
I
On/Off Delay
S Make/Break
J
Memory Latch S Make
150
www.fmfelectric.com
T8
Time Relay
Application:
• Industrial machinery
151
www.fmfelectric.com
T8
Time Relay
Application:
• Lighting
• Lighting control system
152
www.fmfelectric.com
T8
Time Relay
Application:
• Lighting
• Lighting control system
153
www.fmfelectric.com
T8
Time Relay
06T85110 / 06T85111 / 06T8521T / 06T8541T (SPDT) 06T85120 / 06T85121 / 06T8522T / 06T8542T (DPDT)
154
www.fmfelectric.com
T8
Time Relay
155
www.fmfelectric.com
M8
Call/Reset Relay
Application:
• Fire or emergency alarm systems.
156
www.fmfelectric.com
M8
Step/Monostable Relay
157
www.fmfelectric.com
M8
Step Relay
Application:
• Industrial machinery ????
• Manufacturing ????
158
www.fmfelectric.com
M8
Step Relay
Application:
• ????
159
www.fmfelectric.com
M8
Step Relay
Application:
• ????
160
www.fmfelectric.com
M8
Step / Monostable & Call / Reset Relay
161
www.fmfelectric.com
L8
Floatless Level Switch
Application:
• It is generally used in homes, industries, commercial
places, plubic places and other places where automatic
monitoring of water supply and drainage systems is
required.
It has a small size and complete specification.
It can be widely used in domestic water systems, sewage
treatment systems, and special liquid supply systems.
162
www.fmfelectric.com
L8
Step/Monostable Switch
Application:
• It is generally used in homes, industries, commercial
places, plubic places and other places where automatic
monitoring of water supply and drainage systems is
required.
It has a small size and complete specification.
It can be widely used in domestic water systems, sewage
treatment systems, and special liquid supply systems.
163
www.fmfelectric.com
L8
Floatless Level Switch
Application:
• It is generally used in homes, industries, commercial
places, plubic places and other places where automatic
monitoring of water supply and drainage systems is
required.
It has a small size and complete specification.
It can be widely used in domestic water systems, sewage
treatment systems, and special liquid supply systems.
164
www.fmfelectric.com
L8
Floatless Level Switch
Wiring Diagrams
Water Supply
165
www.fmfelectric.com
TM
Timer Relay
166
www.fmfelectric.com
E05
Modular Socket
Modular Socket
Technical Data
Application The Modular Sockets can be used together with our modular products for connection of mobile devices, tools
or electric and electronic non-modular equipments directly inside civil and industrialswitchboards.
Electrical
Features
62 48
92
E05.20 E05.20B
E05.7 E05.35
167
www.fmfelectric.com
F8
Light Activated Switch
Application:
• Lightning or lightning control system.
L
N
C L N
B1 B2
168
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
169
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
170
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
171
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
172
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
173
www.fmfelectric.com
FS
Switching Power Supply
Application:
• Home control system.
• Building automation
• Industrial control system
• Industrial automation
• Mechanical and electrical equipment
174
www.fmfelectric.com
Residential Safety
176
www.fmfelectric.com
S19
Safety devices
177
www.fmfelectric.com
Notes
178
www.fmfelectric.com
Notes
179
www.fmfelectric.com
PROTECTION,
SECURITY AND
SECTIONING FOR
ALL YOUR
CIRCUITS