You are on page 1of 18

DFINITI TECHNOLOGIES Rev.

1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASLAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, LA WELLHEAD PLATFORM
Document No. SE230701184A-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 19 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 31.26 Pressure drop (Bar) 0.04 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 12636.9
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 216.1 Active Length (mm) 3335 Bundle Weight (kg) 767
17 Nos. of Stages 3 Inactive Length (mm) 775 Vessel Weight (kg) 1440
18 Nos. of Active (connected) 30 Element Sealing Type Welding Total Weight (kg) 2207
19 Nos. of Spares (unconnected) 3 Rating Per Element (kW) 7.20 Total Surface Area (m2) 7.86
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 50.00
21 Watt Density (w/cm2) 2.75 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) 18.74
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 12 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 4 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 4 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 90 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
96
49 350 150 3441
50
51
52
246

53 165mm
54
55
56 454 3335
57
58 775 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASLAA-CP-2901
Project Name: RUYA-FDP01-FEED4, LA WELLHEAD PLATFORM
Document No. SE230701184A-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 86.44 64.83 64.83 216.1
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 2800
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1400
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 1.3
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASMAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, MA WELLHEAD PLATFORM
Document No. SE230701184B-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 19 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 31.26 Pressure drop (Bar) 0.1 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 9275.6
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 162.1 Active Length (mm) 3335 Bundle Weight (kg) 767
17 Nos. of Stages 3 Inactive Length (mm) 775 Vessel Weight (kg) 1440
18 Nos. of Active (connected) 30 Element Sealing Type Welding Total Weight (kg) 2207
19 Nos. of Spares (unconnected) 3 Rating Per Element (kW) 5.40 Total Surface Area (m2) 7.86
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 52.00
21 Watt Density (w/cm2) 2.0627 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) 20.74
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 12 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 4 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 4 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 92 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
96
49 350 150 3441
50
51
52
246

53 165mm
54
55
56 454 3335
57
58 775 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASMAA-CP-2901
Project Name: RUYA-FDP01-FEED4, MA WELLHEAD PLATFORM
Document No. SE230701184B-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 64.84 48.63 48.63 162.1
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 2800
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1330
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 1.1
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASPAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, PA WELLHEAD PLATFORM
Document No. SE230701184C-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 23.9 / 19 / 37.85 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 31 / 30 / 59 Pressure drop (Bar) 0.3 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 40007.5 / 11985 / 11389
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 289.2 Active Length (mm) 3335 Bundle Weight (kg) 767
17 Nos. of Stages 3 Inactive Length (mm) 775 Vessel Weight (kg) 1440
18 Nos. of Active (connected) 30 Element Sealing Type Welding Total Weight (kg) 2207
19 Nos. of Spares (unconnected) 3 Rating Per Element (kW) 9.64 Total Surface Area (m2) 7.85
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 87.00
21 Watt Density (w/cm2) 3.682 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 12 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 4 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 4 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 127 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
96
49 350 150 3441
50
51
52
246

53 165mm
54
55
56 454 3335
57
58 775 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASPAA-CP-2901
Project Name: RUYA-FDP01-FEED4, PA WELLHEAD PLATFORM
Document No. SE230701184C-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 115.68 86.76 86.76 289.2
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 2800
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1490
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 1.5
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASQAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, QA WELLHEAD PLATFORM
Document No. SE230701184D-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 30 / 18.28 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 60 / 32 Pressure drop (Bar) 0.1 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 8214.1 / 15911.8
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 307.3 Active Length (mm) 3335 Bundle Weight (kg) 767
17 Nos. of Stages 3 Inactive Length (mm) 775 Vessel Weight (kg) 1396
18 Nos. of Active (connected) 30 Element Sealing Type Welding Total Weight (kg) 2163
19 Nos. of Spares (unconnected) 3 Rating Per Element (kW) 10.24 Total Surface Area (m2) 7.86
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 96.00
21 Watt Density (w/cm2) 3.911 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 12 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 3 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 3 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 136 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
96
49 350 150 3441
50
51
52
246

53 165mm
54
55
56 454 3335
57
58 775 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASQAA-CP-2901
Project Name: RUYA-FDP01-FEED4, QA WELLHEAD PLATFORM
Document No. SE230701184D-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 122.92 92.19 92.19 307.3
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 2800
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1510
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 1.5
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASRAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, RA WELLHEAD PLATFORM
Document No. SE230701184E-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 30 / 19/07 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 59 / 31 Pressure drop (Bar) 0.22 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 20850 / 45393
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 780.7 Active Length (mm) 3335 Bundle Weight (kg) 1970
17 Nos. of Stages 3 Inactive Length (mm) 892 Vessel Weight (kg) 2987
18 Nos. of Active (connected) 90 Element Sealing Type Welding Total Weight (kg) 4957
19 Nos. of Spares (unconnected) 9 Rating Per Element (kW) 8.67 Total Surface Area (m2) 23.58
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 92.00
21 Watt Density (w/cm2) 3.311 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 20 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 4 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 4 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 132 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4400mm
48 drawing not to scale, for illustration only
127.9
49 450 150 3441
50
51
52
393

53 313mm
54
55
56 535 3335
57
58 892 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASRAA-CP-2901
Project Name: RUYA-FDP01-FEED4, RA WELLHEAD PLATFORM
Document No. SE230701184E-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 312.28 234.21 234.21 780.7
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker ACB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 3200
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 2050
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 3
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. ACB is selected as main incomer to meet the 65kA-1s requirement.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASTAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, TA WELLHEAD PLATFORM
Document No. SE230701184F-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 18.28 / 30 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 31.26 / 60.75 Pressure drop (Bar) 0.1 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 16127 / 7727
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 499.9 Active Length (mm) 3335 Bundle Weight (kg) 1248
17 Nos. of Stages 3 Inactive Length (mm) 721 Vessel Weight (kg) 2182
18 Nos. of Active (connected) 60 Element Sealing Type Welding Total Weight (kg) 3430
19 Nos. of Spares (unconnected) 6 Rating Per Element (kW) 8.33 Total Surface Area (m2) 15.71
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 105.00
21 Watt Density (w/cm2) 3.1815 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 18 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 3 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 3 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 145 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
106.6
49 400 150 3429
50
51
52
313

53 273mm
54
55
56 385 3335
57
58 721 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASTAA-CP-2901
Project Name: RUYA-FDP01-FEED4, TA WELLHEAD PLATFORM
Document No. SE230701184F-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 199.96 149.97 149.97 499.9
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 3000
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1690
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 2.1
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASUAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, UA WELLHEAD PLATFORM
Document No. SE230701184G-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 18.97 / 18.97 / 27.92 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 32 / 31 / 60 Pressure drop (Bar) 0.13 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 28040 / 8414 / 12781
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 501.6 Active Length (mm) 3335 Bundle Weight (kg) 1248
17 Nos. of Stages 3 Inactive Length (mm) 721 Vessel Weight (kg) 2182
18 Nos. of Active (connected) 60 Element Sealing Type Welding Total Weight (kg) 3430
19 Nos. of Spares (unconnected) 6 Rating Per Element (kW) 8.36 Total Surface Area (m2) 15.71
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 105.00
21 Watt Density (w/cm2) 3.1925 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 18 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 3 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 3 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 145 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
106.6
49 400 150 3429
50
51
52
313

53 273mm
54
55
56 385 3335
57
58 721 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASUAA-CP-2901
Project Name: RUYA-FDP01-FEED4, UA WELLHEAD PLATFORM
Document No. SE230701184G-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 200.64 150.48 150.48 501.6
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 3000
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1700
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 2.1
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASWAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, WA WELLHEAD PLATFORM
Document No. SE230701184H-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 24.29 / 19 / 34.25 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 32 / 31.26 / 60 Pressure drop (Bar) 0.17 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 32375 / 9711 / 11067
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 340.2 Active Length (mm) 3335 Bundle Weight (kg) 1248
17 Nos. of Stages 3 Inactive Length (mm) 721 Vessel Weight (kg) 2182
18 Nos. of Active (connected) 60 Element Sealing Type Welding Total Weight (kg) 3430
19 Nos. of Spares (unconnected) 6 Rating Per Element (kW) 5.67 Total Surface Area (m2) 15.71
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 95.00
21 Watt Density (w/cm2) 2.1656 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 18 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 3 900 200 0 RTJLWN Connection Flange SA 350-LF2
32 N2 Outlet 3 900 200 0 RTJLWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJLWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 135 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
106.6
49 400 150 3429
50
51
52
313

53 273mm
54
55
56 385 3335
57
58 721 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASWAA-CP-2901
Project Name: RUYA-FDP01-FEED4, WA WELLHEAD PLATFORM
Document No. SE230701184H-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 136.08 102.06 102.06 340.2
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 2800
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1560
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 1.6
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASXAA-E-2901 Quantity 1
Project Name RUYA-FDP01-FEED4, XA WELLHEAD PLATFORM
Document No. SE230701184I-DTS-HTR

1 ENVIRONMENTAL CONDITIONS
2 Location Outdoor Certification ATEX Ex db eb Gb, Zone 2 IIB, T3
3 Amb Temp.(° C, Min/Max) 10 42 IP Rating IP66
4
5 OPERATING CONDITIONS
6 Inlet Temp.(° C) 24.29 / 19 / 34.25 Pressure (Bar.g) 120 Line Voltage (V, Hz) 400V, 50 Hz
7 Outlet Temp.(° C) 32 / 31.26 / 60 Pressure drop (Bar) 0.17 Electrical Conn. 3W DELTA
8 Process Medium Lift Gas (HC) Mass Flow Rate (kg/hr) 32375 / 9711 / 11067
9
10 DESIGN PARAMETERS
11 Design Code ASME VIII Div1 Design Pressure (Bar.g) 140/FV NACE Compliance Y
12 Code Stamp U-Stamp Design Temp.(° C) 82/-46 Radiography (%) 100
13 Corrosion Allowance (mm) 3
14
15 HEATER DESIGN
16 Design Rating (kW) 582.5 Active Length (mm) 3335 Bundle Weight (kg) 1435
17 Nos. of Stages 3 Inactive Length (mm) 721 Vessel Weight (kg) 2182
18 Nos. of Active (connected) 60 Element Sealing Type Welding Total Weight (kg) 3617
19 Nos. of Spares (unconnected) 6 Rating Per Element (kW) 9.71 Total Surface Area (m2) 15.71
20 Element Type Seamless Hairpin Element Tube Material Incoloy 800 Element Sheath Temp.(° C) 95.00
21 Watt Density (w/cm2) 3.709 Element Diameter (mm) 12.5 Mean Temp Diff.(° C) TBC
22
23 TERMINAL BOX
24 Terminal Box Material SS316 Painting N ACH Y Power Cable Gland N
25 Instrument JB SS316 Painting N Sunshade Y Instrument Cable Gland Y
26
27 HEATER CONSTRUCTION
28 REF. DESCRIPTION SIZE (in) CLASS STAND OFF ORIENTATION FLANGE MATERIAL
29 (lb) (mm) TYPE
30 H1 Heater Flange 18 900 NA Horizontal RTJBL Shell SA 333-6
31 N1 Inlet 3 900 200 0 RTJWN Connection Flange SA 350-LF2
32 N2 Outlet 3 900 200 0 RTJWN Saddle/Support SA 516 Gr70
33 N3 Drain 2 900 200 180 RTJWN Bolts/Nuts SA320L7M / SA194Gr7LM
34 EIH Support Plate/Flange SA 350-LF2
35 Gasket SS RTJ
36 Internals SS316L
37
38 OVER-TEMPERATURE PROTECTION
39 Instruments Type Duplex/ Hi Setpoint Hi/Hi Setpoint Spare Total Qty
40 Simplex °C °C
41 Element O.T Sensor RTD (PT100) Duplex 3 135 3
42 Flange O.T Sensor RTD (PT100) Duplex 1 75 1
43 Vessel O.T Sensor N/A N/A
44 Process Control Sensor N/A N/A
45 Terminal Box O.T Sensor N/A N/A
46 Temp Transmitter (TT) HART (SS Exd,IS,LCD,SIL-2) N/A 4
47 Removal Space: 4300mm
48 drawing not to scale, for illustration only
106.6
49 450 150 3429
50
51
52
313

53 273mm
54
55
56 385 3335
57
58 721 drawing not to scale, for illustration only
59 Notes:
60
61
62
63
64

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written permission
of DFINITI is prohibited
DFINITI TECHNOLOGIES Rev. 1
7030 Ang Mo Kio Avenue 5, LIFT GAS HEATER
#08-65 Singapore 569880 CONTROL PANEL DATASHEET
T:+65-69 0808 69 | F:+65-62 8202 18
Tag No. ASXAA-CP-2901
Project Name: RUYA-FDP01-FEED4, XA WELLHEAD PLATFORM
Document No. SE230701184I-DTS-HCP

1 ENVIRONMENTAL CONDITIONS
2 Location Indoor Certification Non-Hazardous Area
3 Amb. T. (oC) 40 IP Rating IP42
4
5
6 LOAD CONFIGURATION
7 Type of Control Thyristor / Contactor Power Rating (kW)
8 Control Mode Single cycle, Zero cross Stage 1 Stage 2 Stage 3 Stage 4 Stage 5 Stage 6 Total
9 Nos. of Stage Control 3 233.00 174.75 174.75 582.5
10 Thyristor Contactor Contactor
11 MAIN COMPONENTS LOCAL FUNCTIONS INDICATING LAMPS
12 DESCRIPTION ITEM QTY Heater Start PB Element Hi O.Temp N/A
13 Incoming Circuit Breaker MCCB 1 Heater Stop PB Element Hi-Hi O.Temp 3
14 Safety Switch Contactor 3 MCCB Handle Interlocked Flange O.Temp 1
15 Main Control N/A N/A Earth Fault Reset Vessel O.Temp N/A
16 First Stage Control Thyristor 2 legs 1 Auto(Remote)/Manual (local) Switch T.Box O.Temp N/A
17 Other Stage Control Contactor 2 Multi-Function Digital Meter Panel O.Temp 1
18 Temperature Controller N/A N/A Emergency Stop PB Thyristor Fault/Fuse Failure 1
19 Load Sequencing L.Sequencer 1 Lamp Test PB Earth Fault 1
20 Trip Control Trip Amp 5 Trip Reset Key Switch Power On 1
21 Earth Leakage Protection TN 1 Potetiometer Heater On 3
22 Stage Protection MCCB 3 Heater Off 3
23 Signal Barrier IS Galvanic Barrier 5 Audible Alarm 1
24 EMC Filter - 1 Duty/Standby Fan Failure Alarm 2
25 ACH - 1 Gas Low Flow 1
26 Changeover Circuit N/A N/A Heater ACH On/oFF 1
27 Surge Protection Power Circuit 1 Panel ACH On/Off 1
28
29 CONTROL INTERFACE ELECTRICAL
30 HEATER TO PANEL TYPE QTY DESCRIPTION RATING QTY
31 Element O.Temp 4-20 mA 3 Main Incomer 400 VAC 1
32 Flange O.Temp 4-20 mA 1 Outgoing to Heater 400 VAC 3
33 Vessel O.Temp N/A N/A Power to ACH (Internally Derived) 230 VAC 1
34 T. Box O.Temp N/A N/A Client UPS N/A N/A
35 Gas Flow Rate (By Client) 4-20 mA 1 Stepdown Transformer 500 VA 1
36 Control Power (Internally Derived) 24 VDC 1
37 DCS TO PANEL
38 Process Control 4-20 mA 1
39 ESD (Remote) 24 VDC 1 ENCLOSURE
40 Remote Start/Stop 24 VDC 1 Material: Painted CS Height (mm): 2000
41 Finishing: RAL 7035 Width (mm): 3200
42 PANEL TO DCS Internal Coating: N/A Depth (mm): 600
43 Common fault Volt Free Contact 1 Mounting: Free Standing Plinth (mm): N/A
44 Heater On/Off Status Volt Free Contact 1 Access: Front Weight (kg): 1860
45 Local/Remote Status Volt Free Contact 1 Cable entry: Bottom (Brush Type) No. of Compartment: 3
46 Heater Available Volt Free Contact 1 Gland Plate: N/A Heat Dissipation (kW) 3.2
47 Heater Flange Temp 4-20 mA 1 Cable Gland: No Internal lighting: Yes
48
49 Notes
50 1. MCCB would have Ics value of 65kA for main incomer.
51 2. Active harmonic filter shall be built in this control panel.
52 3. Phase angle control shall be installed in the control panel. However, phase angle operation should be avoided to minimize the harmonic distortion.
53 4. Addressable smoke detector shall be made available in the control panel.
54
55
56
57
58
59
60
61
62
63
64
65
66
67
67

This document is the property of DFINITI Technologies and is meant for the intended purpose only. Any disclosure or reproduction in part or as a whole without the written
permission of DFINITI is prohibited.

You might also like