Professional Documents
Culture Documents
Electrical Theory Assignment - 1
Electrical Theory Assignment - 1
2. Describe the operation of the circuit and the function of each component used.
3. Describe now the various inputs affect the output of your circuit.
4. Draw your own schematic circuit diagram of your circuit using either “Multisim” or
“Circuitmaker6”.
5. Draw your own veroboard layout for your circuit using “Ron J’s” method.
6. Describe the sequence of construction and any warnings, cautions and or areas that
require special attention.
7. Use Microsoft Excell (with imbedded formula for the calculations) to prepare a BILL
OF MATERIALS AND COSTINGS for purchasing enough material to construct 1, 100
& 1000 of your circuit (buying components in 100’s gets you a 15% discount and
1000’s a 30% discount).
8. State testing and fault finding procedures and voltage, current or resistance readings
you would expect to see at critical points in the circuit.
Note:
1. This is to be your best work – demonstrating all you have learned on
the course. It should be good enough to show to a prospective
employer and get you the job.