Professional Documents
Culture Documents
电磁一机组操作说明书(粉料)X Edit
电磁一机组操作说明书(粉料)X Edit
Operating Instructions
Contents:
This system is an electromagnetic magnetic separation system. The control mode is composed of two parts: the automatic control mode composed of "touch
screen + cabinet button" and the manual control mode; Control parameters, realize automatic action according to equipment process requirements; in manual control
mode, system equipment is manually started and stopped according to production requirements; the controlled magnetic separation equipment is mainly an electromagnet
and a matching vibrating screen, with electromagnetic voltage adjustment And display function, real-time display function of electromagnetic current, real-time temperature
1. Instrument part
The instrument part consists of a voltmeter and an ammeter indicating the excitation voltage of the electromagnet, the excitation current of the electromagnet, and the operating temperature of the electromagnet.
the touch screen is Kunlun Tongtai series touch screen, as shown in the following figure:
1
Machine Translated by Google
The manual control operation on the panel includes the following parts: power
indicator light, alarm, system emergency stop button, manual/automatic switching knob, start and stop button
4. Electromagnetic regulation
2
Machine Translated by Google
Electromagnetic size is adjusted by potentiometer: increase clockwise and decrease counterclockwise. The voltage and current of the electromagnet are displayed in real time in the instrument
When the control cabinet panel is manually operated, the "manual/automatic" knob should be turned to the "manual" position (at this time, the "control side" on the touch screen
"Type" status indicator light should be red to show the status text "cabinet control"), and then press the corresponding device button of "Start, Stop".
touch screen is used to control the operation, the "manual/automatic" knob on the cabinet panel should be turned to the "automatic" position 1. Login operation
is connected to the control power supply, the touch screen system is started After that, the following initial screen is displayed
3
Machine Translated by Google
When the user clicks the 'User Login' button, the system pops up the following login information box, as shown in the figure below
user name
principal
password
At this time, after correctly entering the user name and password (original password: 111111), click the OK button, and the system enters the control page, and all buttons on the
Touch screen manual control and operation indication part: the green button on the left is the equipment start button, the middle red button is the equipment stop button, and the
right is the operation indicator. The red indicator light indicates that the corresponding equipment is off, and the green indicator light indicates that the corresponding equipment can
be turned on.
4
Machine Translated by Google
ÿÿÿÿ
Alarm display part: the red light indicates the normal working state, and the yellow light flashes to indicate the alarm state.
ÿÿÿ
There are three status indicators above: 1) Control mode, the cabinet control is the control cabinet button control, and the program control is the touch screen
control. 2) Program control mode, manual is to manually click the start and stop button on the screen to control, and automatic is to automatically run according to the time
set by parameters. 3) Automatic operation, operation and stop indicate the automatic
operation state. The middle button is the automatic local control mode, and the next button is the automatic start
and stop button. Below are the automatic and manual control
selection buttons. 4) Remote on-site button: When it is on the spot, it is the touch screen control, and when it is on the remote, it is the remote control of
5
Machine Translated by Google
1) The "manual/automatic" knob on the cabinet panel should be turned to the "automatic" position (at this time the "control mode" status in the screen indicates
The LED should be green with the status text "Programmed") displayed.
2) Select the automatic and manual control selection button to manual (the "program control mode" indicator light in the control screen is red, and the status
time). 3) Click the "Open" or "Close" button of the corresponding device to start and stop the corresponding device. When phase
After the corresponding equipment starts running, the corresponding indicator light in the screen will change from the red stop state to the green running state.
row time
overtime
delay to open of discharge iron valve time delayed time to close the discharge iron valve
delay off solenoid time delayed opening the feed valve time
1) Click the "Parameter Setting" button in the screen to set the time parameters in the corresponding time parameter setting input box, and then click the return button
6
Machine Translated by Google
button.
When clicking the input box of parameter setting in the screen, a keyboard will pop up, as shown in the figure below
Among them, <ÿ” is the clear key to clear the input content; the “OK” key is the confirmation key to confirm the input content.
2) The "manual/automatic" knob on the panel of the cabinet should be turned to the "automatic" gear (at this time, the "control mode" status in the screen indicates
The LED should be green with the status text "Programmed") displayed.
2) Select the automatic and manual control selection button to automatic (the indicator light of "programmed control mode" in the control screen is green, and the status
text "automatic" is displayed at the same time). On-the-spot remote button hits on-the-spot. 3)
Click the automatic start and stop buttons, and the unit equipment will complete the start-up and operation operation according to the set time parameters and the program in the
PLC; when the corresponding equipment starts to run, the indicator light corresponding to the equipment in the screen will change from a red stop state Turns green to run status.
is pressed to remote, the upper computer can start and stop with one key, and the device will complete the start-up operation according to the set time parameters and the program
in the PLC.