Professional Documents
Culture Documents
6 DOHC > Transmission Automatic Transaxle > P0733 Relación incorrecta de tercera > Información general
Component Location
General Description
Input speed sensor value must be equal Output speed sensor value times each gear ratio at each gear
position of trasmission. That operation value equal with TCM operation value. For example Output
speed sensor value is 1000RPM and 3rd speed gear ratio is 1.8 then Input speed sensor value must be
1800 RPM.
DTC Description
This code is set when Input speed sensor value is different with TCM operation value, caused by
control valve sticking, solenoid valve fault(most of fault is mechanical, rarely electrical fault).
DTC Detecting Condition
Item Detecting Condition Possible Cause
DTC Strategy • 3rd gear incorrect ratio
• Solenoid power voltage> 10V
• Oil Temperature Sensor >-10℃
• Time after shift changing finish > 1sec
• Engine speed >400rpm
Enable Conditions • Input speed sensor
• Output speed >200rpm fault
• Input speed > 0rpm • Output speed sensor fault
• Shift stage 3rd. gear • Clutch slip in
1/3
2012 > F 1.6 DOHC > Transmission Automatic Transaxle > P0733 Relación incorrecta de tercera > Información general
Specification
Operating step table at each status
Solenoid
OD 35R UD 26
SS-A SS-B
N-H N-H N-H N-L
N,P ○ ○ ○ ○
1st ○ △ ○
2nd ○ ○ ○
3rd ○ ○
4th ○
5th ○ ○
6th ○ ○ ○
L ○ ○
REV ○ ○ △ ○
○ : Connected status
△ : Connedted at Vehicle speed above 8km/h
Clutch Brake
35R OD C 26 B UD B LR B O.W.
P,N ●
R ● ●
D1 ● ○ ●
D2 ● ●
D3 ● ●
D4 ● ●
D5 ● ●
D6 ● ●
2/3
2012 > F 1.6 DOHC > Transmission Automatic Transaxle > P0733 Relación incorrecta de tercera > Información general
3/3