Professional Documents
Culture Documents
Hmsi Bar Comp Step
Hmsi Bar Comp Step
SALT SPRAY TEST METHOD:- JIS Z 2371- 1994 SAMPLE DESCRIPTION: POWDER COATING
TEST CONDITION :- NO RED RUST 48 HRS.
TEMP 35 ±2˚ COATING THICK SPEC 20µ MIN.
PH 6.5 - 7.2 COATING THICK ACTUAL 62µ
SALT CONCENTRATION 5 % NACL
FOG COLLECTION 0.85 - 2 ml/hr.
AIR PRESSURE 0.7 - 1.8 kg /cm2
OBSERVATION:
HRS WHITE RUST RED RUST REMARK
COMMENTS: On completion of the exposure test the metal item shall be gently washed or dipped in clean water with a
temperature not higher than 38˚C to remove any salt deposit that may have formed and then allowed to dry at room
temperature of 18 to 25 ˚C for 24 ± hours . After this activity no signs of deterioration likely to impair the proper
functioning of the assembly and no significant corrosion,shall be visible to the unaided eye if a qualified observer.