Professional Documents
Culture Documents
Power Tools Referencing BYCN V022019
Power Tools Referencing BYCN V022019
Sound Sound exposition level, related to a base period of 8 hours, shall not
exposition level exceed 80 dB (A), PPE included. Values must be specified by the
supplier and compliant with applicable standards.
Vibration value Vibration value level, must be as close as possible to 2,5 m/s2. At the
minimum, the value must not exceed 10m/s² (maximum cumulative
use of 2 hours per day). Triaxial vibration value must be specified by
the supplier and compliant with applicable standards.
Weight Weights given are for the tools, without consumables (or specified).
The goal is to provide tools as light as possible
Gripper system Handles and grip surface allowing a good power grip. The
ergonomic grip makes the tool comfortable to work with,
without excessive demand for the wrist (no twisting of the wrist
or awkward postures). Non-slip grip (Soft-Grip)
Protection Source dust capture system compatible for each tool concerned
against dust
Safety features According to the type of tools : dead man’s switch, quick acting brake
system and protective casing (specified for each family)
4
Products family divided in sections
Relevant tasks mentioned for each family
Minimum requirements for each family
Pictograms
Specific Warning
MINIMUM REQUIREMENTS
Class 2, PR 20
HILTI DG 150
For heavy-duty grinding
Adjustable vacuum adapter
Diameter 150
Power rating : 2100W
4,1kg EL005333
MAKITA BO6030J
Multi materials Finishing sander
Adjustable vacuum adapter
Ø150
Power rating : 310W
2,4kg EL005335
MAKITA BO5041J
Multi materials Finishing sander
Adjustable vacuum adapter
Ø125
Power rating : 300W EL008689
1,4 kg
MAKITA 9403J
Maximum speed :500m/min
Abrasive products : 100x610 mm
Dust removal system included
Power rating : 1200W
5,7kg Reinforced EL005332
training
9
RELEVANT TASKS
Corrective chiseling
Removing surface imperfections on concrete
Removing tiles and plaster
Light chiseling on brick and block, corrective chiseling
and finishing on concrete
Exposing reinforcing bars for concrete repair work
Cleaning equipment
MINIMUM REQUIREMENTS
Class 2, PR 20
Source dust capture system
CORDED BREAKERS
CORDLESS BREAKERS
11
RELEVANT TASKS
Removing concrete for rebar connections and utility connections
Medium-duty demolition of concrete slabs and foundations
Brush hammering and compacting
Concrete floor breaking
Heavy-duty chiseling in concrete and masonry
Removing tiling
Light chiseling (adjustments for openings)
MINIMUM REQUIREMENTS
Class 2, PR 20
Start up protection in
case of power
interruption Source dust capture system
CORDED
MINIMUM REQUIREMENTS
Class 2, PR 20
Active torque system
Dead man's switch Source dust capture system
Start up protection in case of
power interruption
Non-slip grip
CORDLESS COMBI
CORDLESS COMBI
16
LISTED TOOLS
CORDED COMBI
17
Drilling through-holes and penetrations RELEVANT TASKS
MINIMUM REQUIREMENTS
Class 1, PR 55
Non-slip grip
Vibration value level must
not exceed 10m/s²
(maximum cumulative use
of 2 hours per day). Both handles grasping
Or rig-mounted system
Sound exposition level, related to a base
period of 8 h ≤ 80 dB (A), PPE included 18
LISTED TOOLS
Prevention
HILTI DD150
Drilling stand
Pass DD ST 15O U to
order
separately
Handheld or rig-based coring
Power rating : 2200W TOOL
Tool chuck type : BI+ EL010242
Diameter range : 8 to 162mm DRILLING
Reinforced STAND
8,2 kg training EL009673
MINIMUM REQUIREMENTS
Non-slip grip
MAKITA 5903RKX2
Corded 2000W
Vacuum connexion system
Cutting depth up to 85mm
No load speed : 4500 rpm
7,2 kg EL005712
FESTOOL TS75EBQ
Guide rail
available
Solution to
Corded Plunge-cut saw recommend in
Vacuum connexion system confined
environment
Cutting depth up to 75 mm
Power rating : 1600W
No load speed : 1350 à 3550 rpm EL005407
6,2 kg
MAFELL MT55CC
Guide rail
available
Solution to
Corded Plunge-cut saw recommend in
Vacuum connexion system confined
Cutting depth up to 57mm environment
Power rating : 1400W
No load speed : 6250 rpm EL005404
4,5 kg
MAKITA DHS630RMJ
Cordless 18V
Vacuum connexion system
Cutting depth up to 66mm
No load speed : 3100 rpm
EL010290
3,5 kg
21
LISTED TOOLS
BASE CUTTER
Cuts door
VIRUTEX RZ270S frames without
the
Corded need to
Cutting doors, door frames disassemble
base boards and skirtings the butt
straps
Vacuum connexion system
Maximum cutting height: 35 mm
No-load speed: 4.800-8.500 rpm EL009675
Power rating : 1300W
5,6 kg
MITER SAWS
MAKITA LS1019L
Workbench to
order separately
JIG SAWS
HILTI WSJ850-ET
Corded
Stroke rate : 3000 strokes pm
Stroke length: 28 mm
Looped handles
2,7 kg EL005423
HILTI SJT6
Cordless 22V/3Ah
Stroke rate : 3000 strokes pm
Stroke length : 28 mm
2,9 kg EL018752
MAKITA DJV180RMJ
Cordless 18V/4Ah
Stroke rate : 2600 strokes pm
Stroke length : 26 mm
2,9 kg EL010297
23
LISTED TOOLS
CHAIN SAWS
MAKITA DUC353RF2
Prevention
Pass
MINIMUM REQUIREMENTS
PLANERS
Cordless
18 V
Maximum rebate depths : 9 mm
Planing width: 82 mm
EL008685
3,4 kg
26
LISTED TOOLS
RIPPERS
Corded
Power rate: 1100W
Maximum diving depth: 57 mm
3,4 kg
Reinforced
training EL010284
Prevention
MAKITA RP2300FCXJ Pass Specific to
repair
formworks
Corded
Power rate: 2300W
Maximum diving depth: 0 à 70 mm
6,1 kg Reinforced
training EL017187
27
LISTED TOOLS
TRIMMERS
JOINTING MACHINE
Prevention
VIRUTEX AB111N Pass
Grooving panels
Power rate : 900 W
10000 rpm
Lifting and tilting table Reinforced EL017139
3,2 kg training
28
These specifications cover all tools, except angle grinder with a smaller diameter than
230mm, which are strictly forbidden. The tools must be chosen regarding the needs.
Other tools requiring special precautions can be adapted: contact Distrimo
RELEVANT TASKS
Formwork skins Weld grinding and metal preparation
Adjustments Base cutting
Interior joineries Curing
Deburring ; completions ; welding works Cladding
Locksmith works ; milling Reducing waste
EXIGENCES
MINIMUM MINIMALES
REQUIREMENTS
Quick acting brake system
For grinders,= Dead man's
switch
Permanently installed Class 2, PR 20
protective casing for disk tools
compatible grinding &slashers
Non-slip grip
REBAR SLITTERS
ATDV GR20E
Cold cut
without spark
Base cutting 3
Corded mm
Cut rods without metal flow
up to 20mm
Power rate : 1200 W
3,5kg EL008528
MAKITA DSC250RT
Cold cut
without spark
Base cutting 3
mm
Cordless
Cut rods without metal flow
up to 25mm
4 kg EL018578
30
LISTED TOOLS
CORDED GRINDER
CORDLESS GRINDER
Dust removal
MAKITA DGA900PT4 system for grooving
work to order
2*18 V – 5Ah separately
Ø230 mm Solution to
recommend in
Protective casing (grinding and restricted
slashing) Limited environment
Maximum depth : 60 mm autonomy and EL020165
5,2 kg (with battery) power
DIE GRINDERS
Long, narrow
FEIN GSZ 8-280 PEL neck allows tool
to reach deep
into workpieces
Corded
Power rate : 750 W
Variable speed
1,8 kg Choose matching EL020166
accessories
GAUGE NIBBLERS
Cordless 18V
Capacity: Cuts up to 16 gauge mild
steel and 18 gauge stainless steel
2,2 kg EL018700
FEIN BLK 5
Cutting
direction can be
adjusted in
1200 W three 90° steps
Steel up to 400 N/mm² 5,0 mm without the
Steel up to 600 N/mm² 3,3 mm need for tools
Steel up to 800 N/mm² 2,5 mm
Stainless steel up to 2,5 mm EL020168
3,8 kg
Allows to cut
FEIN ABLK 18 1.6 E Select any shape
Precise cuts in
18 V trapezoid and
Steel up to 400 N/mm² 1,6 mm corrugated
Steel up to 600 N/mm² 1,0 mm sheet metal and
profiles
Steel up to 800 N/mm² 0,7 mm
Cutting width 5 mm EL020169
1,6 kg without battery
32
METAL CIRCULAR SAW LISTED TOOLS
CUTTING BANDSAW
MAKITA DPB181RME
Prevention
Pass
Cordless 18 V – 4 Ah
Cutting capacity (steel pipe) 64 mm
Maximum band speed : 192 rpm
3,2 kg
EL020171
MAKITA DPB180RME
Prevention
Pass
Cordless 18 V – 4 Ah
Cutting capacity (steel pipe) 120 mm
Maximum band speed : 84 à 162
rpm EL017248
6,4 kg
33
LISTED TOOLS
SCREWDRIVERS
FEIN ASCM18
Cordless drill/driver
18 V
Drives 10 x 400 mm screws without
pre-drilling EL020172
2,2 kg (with battery)
FEIN BOS 16
2 speed drill/driver up to 16 mm
Corded
Power rate : 1200 w
3,7 kg EL020173
FEIN KBM 50 U
Power rating : 1200 W
Ø max. carbide drill: 50 mm
Ø max. HSS drill: 40 mmm
Maximum depth drill 50 (75*) mm
EL020174
13,9 kg
FEIN KBM 65 U
Power rating : 1300 W
Ø max. carbide drill: 65 mm
Ø max. HSS drill: 45 mm
Maximum depth drill 50(75*) mm
16,1 kg
Consider the weight of EL020175
the tool
34
Other tools requiring special precautions can be adapted: contact Distrimo
MINIMUM REQUIREMENTS
Class 2, PR 20
Large selection
FEIN SUPERCUT FSC 1.7 of accessories
for cutting,
Corded sawing, sanding,
scraping…
Power rating : 450 W
Tool change Quick IN
1,45 kg
MAKITA DTM51RMJX3
Large selection
of accessories
for cutting,
sawing, sanding,
Cordless scraping…
18V
Quick tool change
2,2 kg EL008673
Large selection
MAKITA TM3010CX3J of accessories
for cutting,
sawing, sanding,
Corded scraping…
Power rating : 320W
Quick tool change
1,4 kg EL008672
Cutting,
DREMEL 4300 grinding,
precision
Corded drilling
Power rating : 175W
0,66kg
36
LISTED TOOLS
RECIPRO SAWS
Cutting capacity :
255mm wood/
130mm steel pipe
Length 32 mm Rental contract &
1510W Reinforced training
4,6KG Vibration value level EL010289
limiting the use
Prevention
MAKITA DJR183RYJ Pass
18V 1,5Ah
Cutting capacity 50mm
(wood/ steel pipe)
Length 13 mm
1,8KG
Rental contract & EL010287
Reinforced training
Prevention
MAKITA DJR186RTE Pass
18V 5Ah
Cutting capacity
255mm wood/
130mm steel pipe Rental contract &
Length 32 mm Reinforced training
3,8KG Vibration value level EL010288
limiting the use
37
LISTED TOOLS
GAS SAW
GROOVING TOOL
SPIT D90
Power rate : 2500W
Cutting width: 7 to 47 mm
Vacuum connexion system
6,5 kg EL007754
KLAUKE ES 65-L
Cordless 18V
Cuts copper and aluminum cables
with lightweight steel armoring
(depending on cable type EL017138
Maximum cutting Ø 65 mm
6,3kg
38
LISTED TOOLS
TILES CUTTER
DIAMINIBOX 200
Power rating: 800 W
Cutting capacity90° 200 mm 450 mm
Cutting length 200mm 420mm
EL010332
15 kg
CUTTING BRICKS
High density
DEWALT DCS397T2
Prevention
material
Pass
Cordless
54V – 6Ah
Blade : 43cm
5,6kg EL018362
MAKITA CP100DZX
12V – 2Ah
Cut flexible material up to 6mm
carpet, fabric, carton
0,88kg EL020179
39
LISTED TOOLS
DRYWALL CUT-OUTS
Cordless
18V – 5Ah
Cuts in dense materials such as abuse-
resistant board, cement board
Raccord d’aspiration EL020184
1,9kg
22V – 3 Ah
Cuts in dense materials such as
abuse-resistant board, cement
board EL018753
1,9kg
40
The tools must be chosen regarding the needs, the material. Other tools requiring
special precautions can be adapted: contact Distrimo RELEVANT TASKS
.
Installing wood frame walls
Baseboards laying
Nailing
Manufacturing wooden frames
Fastening cables and conduits to floors, walls and ceilings on concrete, solid masonry or
steel
Fastening various light electrical installations
Repairing bungalow roofing
Manufacturing electrical cabinets
MINIMUM REQUIREMENTS
Class 2, PR 20
Double safety firing
device
Non-slip grip
GAS NAILERS
HILTI GX 120-ME
Curved
40-nail magazine for better accessibility in
narrow spaces and deep tracks
3,8kg
Reinforced training EL004999
RIVETING MACHINE
42
RELEVANT TASKS
Laying of steel
Mounting pipes and sleeves
Strapping, packaging
MINIMUM REQUIREMENTS
Class 2, PR 20
Non-slip grip
BAR TIERS
SEALER
FROMM Sealer
EL020181
Cordless
18V Dispenser
Strapping dimension: EL020182
width: 8.0 - 13.0 mm / thickness:
0.35 - 0.8 mm Strapping
3,4kg FC004520
44
RELEVANT TASKS
Installation and removal, assembling steel profiles, timber
or pre-cast concrete components
Breakdown services
Maintenance of equipment
Setting stabilization elements
Prefabricated segments, crane crowns
Formwork, siding, metal frame
Interior and exterior joineries
Various screw driving jobs
Electrical equipment
MINIMUM REQUIREMENTS
Class 2, PR 20
Non-slip grip
DRILL DRIVERS
HILTI SFC22-A
Cordless
22V
No load speed 35 to 1800 rpm
Maximum torque: 55 Nm
1,7 kg EL017229
MAKITA DDF481RTE
Cordless
18V
No load speed 2100 rpm
Maximum torque: 115 Nm EL017079
2,6 kg
SCREWDRIVER
MAKITA TD022DSEX
Cordless
7,2 V
Maximum speed :.2450 rpm
Striking rate: 3000 spm
Maximum torque: 25Nm
0,56 kg EL009924
46
LISTED TOOLS
IMPACT SCREWDRIVERS
MAKITA DTD154RTJ
18V – 5Ah
No load speed: 3600 rpm
Maximum torque: 175 Nm
1,5 kg EL009925
18V – 5Ah
No load speed: 3000 rpm
Maximum torque: 203 Nm
1,5 kg EL017156
HILTI UD 30
Ø chuck: 13mm
Rotation speed:2500 rpm
2,5 kg
EL005268
47
LISTED TOOLS
IMPACT WRENCH
HILTI SIW22T-A
Cordless
22V
450 Nm
Anvil type: 1/2
3kg EL010810
HILTI SIW22-A
Cordless
22V
200 Nm
Anvil type: 1/2
1,5kg EL010809
Crimping ducts
Plumbing
Heating system
Electrical equipment
MINIMUM REQUIREMENTS
Class 2, PR 20
Non-slip grip
KLAUKE EK 120UL
Battery powered hydraulic
crimping
18V
Capacity: 10 to 400 mm2
6kg EL010824
KLAUKE AHP700L
18V
Battery powered pump
(coupling plug not included)
6,4kg
EL020180
MINIMUM REQUIREMENTS
EXIGENCES MINIMALES
Class 2, PR 20
Non-slip grip
Sound exposition level, related to a base
period of 8 h ≤ 80 dB (A), PPE included
51
LISTED TOOLS
MAKITA HG5012K
Corded
Heat gun
Flow: 350 to 500 l/min –
Air temperature 350 to 500°C.
EL010325
0,68kg
52
The choice of the dust class depends on the risk assessment and the compliance with
dust standards Other vacuum cleaners can be adapted to specific risk : contact DISTRIMO
RELEVANT TASKS
MINIMUM REQUIREMENTS
EXIGENCES MINIMALES
Class 2, PR 20
Dust Class M
(except
portable
system, with
pass
prevention)
HILTI VC20-U(M)
Container capacity: 21 L
Corded
13 Kg
EL004839
HILTI VC40-U(M)
Container capacity: 36 L
Corded
14,7 Kg
EL004840
SPIT AC 1630 PM
Container capacity: 32 L
Corded
14,8 Kg
EL007647
MAKITA VC3211MX1
Container capacity: 24 L
Corded
Silent
15,6 Kg EL008436
54
LISTED TOOLS
HILTI VC20-U(M)Y
Hybrid
Container capacity: 21 L
15,3 Kg
EL008692
HILTI VC40-U(M)Y
Hybrid
Container capacity: 36 L
16,9 Kg
EL008693
PORTABLE
55
LISTED TOOLS
56