Professional Documents
Culture Documents
DETAIL 1 Concrete:
SHS 220x220x6 1. Concrete shall be M20 grade, UON
2. Clear cover shall be
2.1. Foundations 75mm
15000 2.2. Pedestal 40mm
3. All reinforcement shall be Fe500
14780
4. Stirrups are plain bars of Fe250
Steel:
1. Tubular steel
1.1. All RHS/SHS shall conform to IS-4923
of minm Yst 350 grade
1.2. All CHS shall conform to IS-1161 of
minm Yst 350 grade.
2. Plates shall conform to grade E250 of
IS-2062
3. Anchor bolts shall be threaded as per
IS-42185
4. All open ends of tubes shall be covered with
minimum 3mm plates, unless noted
otherwise, to prevent ingress of moisture into
the tubes.
Painting of Steel:
SHS 220x220x6 1. Surface Preparation - Blast cleaned to SA
SHS 220x220x6 2.5 conforming to SSPC SP10.
6630
2. Primer : Zinc Rich Epoxy 75 microns
3. Barrier : Epoxy Mio 125 microns
7000 4. Finish : Polyurethane - 50 microns. Finish
will be in 2 coats, each of 25 microns.
Second coat will be after erection.
Steel Fabrication:
1. All steel to be fabricated conforming in
general with IS-800
2. Dimensional variations to be as per IS-7215
3. Welding shall conform to IS-9595. Weld
symbols as per IS-813.
4. All welds are 6mm fillet welds unless noted
otherwise.
5. Appropriate welding electrodes shall be used
for welding conforming to IS-814:2004. IS
15000 ER 4211 electrodes preferred.
Base Plate 400 x 400 x 26
Pedestal Heights (mm)
50 Thk Non Shrink Grout
DETAIL 2 Site Type Location Da Db Total Ht
Aroor Display/Detection Median 250 4050 4300
Aroor Display/Detection Shoulder 900 3400 4300
Lingampally Display Median 250 1550 1800
50 250 250 ROAD LEVEL
Lingampally Display Shoulder 900 900 1800
26
0
27
c c
90
SHS 220X220X6
37
120
5
135
D Client
50
Column - SHS 220x220x6
32
90
Ø24 6 Kumara Park West
25
Da Da R1
VIEW B 90
Bengaluru 560 020
615
600
3 legged Stirrups 3 legged Stirrups
A Ø10, 200 c/c Ø10, 200 c/c
6 Project
400
45°
Drawing Title
27
A
22
4. Reinforcement Fe500
12nos Ø16, Top and Bottom PEDESTAL TOP DETAIL to Column GANTRY
1800 5. Stirrups Plain bars Fe250 2500
SHS 220x220x6 Steel Structure and Footings
400
Ø20, Fe500, 8 Nos
4
250 600 250 600 Ø2
160
25
400
Drawing Number Revision
500
160
Ø10, Fe250, Stirrups
25 DETAIL 1 1900 2600
200 C/C
Structural Consultant
D
VIEW A RC FOOTING DETAIL Dr. M. PRADYUMNA
SECTION D-D 160 160
BE, ME(IISc), PhD(IISc), FIAStructE
Consulting Structural Engineer
DETAIL 2 500 Base Plate 26 Thk
Bengaluru, INDIA
PEDESTAL C/S
email: mpradyumna@gmail.com; Mobile: +91 98805 98092