Professional Documents
Culture Documents
7734 16 T6734R7
7734 16 T6734R7
certificate
Number T6734 revision 7
Project number 811913
Page 1 of 7
Characteristics 3 kg ≤ Max ≤ 30 kg
e≥1g
n ≤ 6000 divisions for a single interval scale
n ≤ 3000 divisions (per partial weighing range) for a multi-interval scale
Maximum of 2 partial weighing ranges
T ≤ - ½ Max for a single-interval scale
T ≤ - Max1 for a multi-interval scale
Temperature range -10 °C / +40 °C
Description and The instrument is described in the description number T6734 revision 7 and
documentation documented in the documentation folder T6734-8, appertaining to this
EC type-approval certificate.
Remarks This revision EC type-approval certificate replaces the earlier versions, including its
documentation folder.
C. Oosterman
Head Certification Board
NMi Certin BV Parties concerned can lodge objection This document is issued under the provision
Hugo de Grootplein 1 against this decision, within six weeks after that no liability is accepted and that the
the date of submission, to the general applicant shall indemnify third-party liability.
3314 EG Dordrecht manager of NMi (see “Regulation objection
PO Box 394 and appeal against decisions of NMi”) Reproduction of the complete document is
3300 AJ Dordrecht, NL permitted.
T +31 78 6332332
F +31 78 6332309
certin@nmi.nl
www.nmi.nl
Description
All properties of the non-automatic weighing instrument, whether mentioned or not, may not be in c onflict
with the legislation.
The electronics;
The mechanical assembly with load cell.
See drawing:
- SM-100 Block Diagram, drawing number SM 100 BD1;
- SM-5100 Block Diagram, drawing number SM 5100 BD1.
The data plate is secured against removal by sealing or will be destroyed when removed.
To secure components that may not be dismantled or adjusted by the user, the non -automatic weighing
instrument has to be secured in a suitable manner on the locations indicated in the drawings:
- SM-100B / SM-100B+ Sealing position, drawing number TAS1123 Rev. 1;
- SM-100EV / SM-100EV+ Sealing position, drawing number TAS1124 Rev. 1;
- SM-100P / SM-100P+Sealing position, drawing number TAS1153 Rev. 1;
- SM-100H / SM-100H+ Sealing position, drawing number TAS1155 Rev. 1;
- SM-100BCS / SM-100BCS+ Sealing position, drawing number TAS1158 Rev. 1;
- SM-100PCS / SM-100PCS+ Sealing position, drawing number TAS1161 Rev. 1;
- SM-100BS / SM-100BS+ Sealing position, drawing number TAS1166;
- SM-5100 Sealing position, drawing number TAS1364;
- SM-100H(+)(V2) Sealing position, drawing number TAS1358.
The non-automatic weighing instrument may be equipped with peripheral equipment which is used for the
applications listed in article 1(2)(a) of the EC Directive (90/384/EEC), if the peripheral equipment is certified
to be connected to an EC type-approved non-automatic weighing instrument by a Notified Body appointed to
certify non-automatic weighing instruments according to paragraph I of Annex II of the EC directive on
Non-Automatic Weighing Instruments.
The non-automatic weighing instrument may be equipped with an Electro nic Point of Sale (EpoS) or an
Electronic Cash Register (ECR), if these EPOS and ECR are certified to be connected to an
EC type-approved non-automatic weighing instrument by a Notified Body appointed to certify non -automatic
weighing instruments according to paragraph I of Annex II of the EC Directive on Non-Automatic Weighing
Instruments.
The non-automatic weighing instrument may be equipped with Electronic Funds Transfer equipment
(EFT/ECU), if these EFT/ECU represent only the price total on the display.
Description
The non-automatic weighing instrument is fitted with a leveling device and a level indicator, unless the
instrument is installed in a fixed position. The level indicator has a sensitivity of at least 2 mm for a tilt of
2/1000.
The non-automatic weighing instrument may be connected to non -essential devices, for example but not
limited to bar code readers, foot switches, second display’s and cash drawers, provided that:
- They do not present primary data used for purposes mentioned in art icle 1(2)(a) of the EC Directive
(90/384/EEC) unless the “preliminary observations” in Annex 1 of this directive is satisfied.
- They do not lead to an instrument having other essential characteristics than those fixed by this
type-approval document.
2 Information about the main constituent parts of the non-automatic weighing instrument
List of devices:
- Determination stability of equilibrium;
- Zero indicator;
- Semi-automatic zero-setting;
- Initial zero-setting;
- Zero-tracking;
- Semi-automatic subtractive tare weighing;
- Preset tare;
- Indication of stable equilibrium;
- Calibration / set-up mode via a switch on the main board;
- Acting upon significant faults;
- Checking the display;
- Price calculation.
The interface section is located on the main board. The non -automatic weighing instrument may be
equipped with one or more of the following protective interfaces that have not to be secured:
- RS232C;
- Ethernet port.
- Display;
- Keyboard;
- Internal printer.
Description
Approval conditions
See chapter 1.3, essential shapes.
The marks, facilities for the marks and the inscriptions on the non -automatic weighing instrument fulfill the
requirements of article 1 of Annex IV.
Documentation
folder
Number T6734-8
Project number 811913
Page 1 of 2