Professional Documents
Culture Documents
English: Reversible Tiger
English: Reversible Tiger
ENGLISH
REVERSIBLE TIGER
Amigurumi
Difficulty level: Advanced Beginner
DISCLAIMER
Hello! thank you for choosing this pa�ern. This pa�ern is for your personal use only.
Please do not reproduce, distribute, or resell it, in parts or in its en�rety, in any
format or transla�on. However, you may sell finished handmade items made from
this pa�ern as long as they were made by yourself in a limited number. Please give
credit to Chibiscra� as the pa�ern designer.
e-mail: chibiscra�@gmail.com
TIPS ABBREVIATION
- Try working �ght s�tches. Use a smaller crochet This pa�ern is wri�en in US Standard Crochet
hook for be�er result. Terms, and assumes knowledge of basic s�tches.
IMPORTANT NOTE: - R = row/Round
Do not work too �ght, so the plushie is s�ll - MR = magic ring
stretchable. - st = s�tch/s�tches
Work every part using the same s�tch - sc = single crochet
tension. - inc = sc increase (2 sc in the same st)
- Count your s�tches. - inc3 = 3 sc in the same st
- Use a s�tch marker or a piece of yarn to mark - dec = sc decrease (crochet 2 st together)
ending of the round. TIPS: Use invisible decrease for be�er finish
- Each round is worked in a con�nuous spiral. Do - hdc = half double crochet
not join rounds with slip s�tch or turn unless - hdc inc = 2 hdc in the same st
stated otherwise. - dc = double crochet
- Crochet through both loops unless stated - ch = chain
otherwise. - sl st = slip s�tch
- It is highly recommended that you read through - FL = Front loop/loops
the pa�ern completely before beginning to - BL = Back loop/loops
crochet. - BLO = BL only
- FLO = FL only
MATERIAL - [____] = repeat sequence between the square
brackets for the indicated number of �mes
- - (__) = s�tch count at the end of the row/round
2.0 mm hook or size suitable for yarn used
- Tapestry needle, embroidery needle
- Fiberfill for stuffing
- Yarn in the same size (I used 4 ply, co�on blend
yarn) in the following colors: orange, dark
DIMENSION
brown, light beige, skin color, peach, black.
The size will vary, depending on the yarn used. If
- Scissors
you use the same materials as me, the finished
- Pin needles
amigurumi is about 7 cm (2.76”) tall.
©2022 chibiscraft // Febby Pranajaya - All right reserved
Crochet pattern by Febby Pranajaya @chibiscraft 2
skip 1 st
last st
Back loop of
last st
Bobble stitches
In this pa�ern, bobble s�tch is made by working 3
uncomplete dc in the same st and join them
together at the top.
1. Yarn over and pull through (three loops on the
Sewing/Joining Flat Pieces hook), yarn over and pull through 2 of the loops
Star�ng on the first piece, insert your needle (image below).
under a crocheted s�tch, from front to back to 2. Repeat the first step 2 more �mes so you have
front. On the corresponding s�tch on the second 4 loops on the hook (image below).
piece, insert the needle from front to back to 3. Yarn over and pull through all 4 loops to close
front under the s�tch, horizontally. your bobble s�tch (image below).
4. Make a sl st at the next st.
EARS (make 2)
Tiger Start with light beige yarn. Work in rows.
R1 : 4sc in MR (4),
Pull �ght, do not join.
HEAD AND BODY Change to dark brown, then make 1ch.
R2 : turn, FLO 4inc (8)
Start with orange yarn. Leave a long star�ng yarn
Fasten off, leave a long tail for sewing.
tail, approximately 10 cm (4”). This tail will be
used to join both �ger and �ger girl at the end of
this pa�ern.
R1 : 6sc in MR (6)
R2 : 6inc (12)
R3 : [sc, inc]x6 (18)
R4 : [sc, inc, sc]x6 (24)
R5 : [3sc, inc]x6 (30)
R6 : [2sc, inc, 2sc]x6 (36)
R7 : [5sc, inc]x6 (42)
R8 : 42sc (42)
R9 : [3sc, inc, 3sc]x6 (48)
PAWS (make 2)
R10-13 (4 rounds) : 48sc (48)
R14 : [7sc, inc]x6 (54)
Start with peach yarn. Work in joined rounds.
R15-19 (5 rounds) : 54sc (54)
R1 : 6sc in MR (6),
R20 : [4sc, inc, 4sc]x6 (60)
join to the first sc with a sl st.
R21-22 (2 rounds): 60sc (60)
Change to light beige. Cut the peach yarn leaving
Fasten off and finish with invisible finish. Then
about 20 cm long tail.
weave in end.
R2 : BLO, loosely 6sl st (6),
join to the first st with a sl st. Make 1ch.
R3 : 3inc, loosely 3sl st (9),
join to the first sc with a sl st.
R4 : [bobble st, sl st]x3 (6)
Fasten off, leave a long tail for sewing.
Using peach tail, embroider paws on every bobble
st.
MUZZLE TAIL
Make an oval by croche�ng around the Start with orange.
founda�on ch. Start with light beige. Make a R1 : 5sc in MR (5)
founda�on ch: 4ch. R2-3 (2 rounds): 5sc (5)
R1 : From the second ch from hook: 2sc, then Change to dark brown.
inc3 in the last st. Con�nue on the other R4 : BLO 5sc (5)
side of the founda�on ch: sc, inc (8) Change back to orange.
R2 : inc, sc, 3inc, sc, 2inc (14) R5 : BLO 5sc (5)
R3 : 14sc (14) R6-7 (2 rounds): 5sc (5)
Fasten off, leaving a long tail for sewing. Do an Change to dark brown.
invisible finish. R8 : BLO 5sc (5)
Change back to orange.
R9 : BLO 5sc (5)
R10-18 (9 rounds): 5sc (5)
Fasten off, leaving a long tail for sewing. Do an
invisible finish.
ASSEMBLY R5
fiberfill). R16
- A�ach the arms, between R17-22. R17
- A�ach the paws on the bo�om three rounds of
the body, avoid sewing on the bobble st.
- A�ach the tail on the bo�om five rounds of the
R22
body
- Embroider the eyes using black yarn on R11, 3 st
wide, 1 st apart from the muzzle
- Embroider the nose on the upper part of the
muzzle, using peach yarn.
- Embroider the mouth under the nose using dark
brown yarn (use 1 ply only)
- Embroider some stripes on the head, ruff, body
and arms, using dark brown yarn.
R5
ugly side of the ruff
faces outside
R8 wide
4st
R11
R12
R16
R20
R22
sew here
sew here
Tiger Girl
With orange yarn, make a loop between R16-17
(the color changing round between skin color and
orange), then make some surface slip stitches
around.
HEAD AND BODY
Start with orange yarn. Leave a long star�ng yarn
tail, approximately 10 cm (4”). This tail will be R17
used to join both �ger and �ger girl at the end of R16
this pa�ern.
R1 : 6sc in MR (6)
R2 : 6inc (12)
R3 : [sc, inc]x6 (18)
R4 : [sc, inc, sc]x6 (24)
R5 : [3sc, inc]x6 (30)
R6 : [2sc, inc, 2sc]x6 (36)
R7 : [5sc, inc]x6 (42)
R8 : 42sc (42)
Change to light beige.
R9 : [3sc, inc, 3sc]x6 (48)
R10 : 48sc (48) Surface
Change to skin color yarn. slip s�tches
R11 : BLO 48sc (48)
R12-13 (2 rounds) : 48sc (48)
R14 : [7sc, inc]x6 (54)
R15-16 (2 rounds): 54sc (54)
Change to orange.
R17 : BLO 54sc (54)
R18-19 (2 rounds) : 54sc (54)
R20 : [4sc, inc, 4sc]x6 (60)
R21 : BLO 60sc (60)
R22 : 60sc (60)
Fasten off, leave a long tail for sewing, about 50
cm long. Do an invisible finish. And then, make the skirt at the FL of R20 (you
worked R21 BLO).
Hold the body so that its bottom is facing you.
Attach the dark brown yarn at the first st of R20
(FLO).
R20
R21
FL of R20
HAIR FL of R10
EARS (make 2)
Make some embroideries at the front part of the
head using the dark brown tail. Start with light beige yarn. Work in rows.
R1 : 4sc in MR (4),
Pull �ght, do not join.
5 st
Change to dark brown, then make 1ch.
R2 : turn, FLO 4inc (8)
Fasten off, leave a long tail for sewing.
5 rounds
2 st
ARMS (make 2)
Start with skin color yarn.
R1 : 6sc in MR (6)
R2 : [sc, inc]x3 (9)
Now, make a round of sl st at the FL of R10, using Change to orange.
light beige tail. R3-4 (2 rounds): 9sc (9)
R5 : dec, 7sc (8)
Make a round of surface slip s�tch between R2-3
using dark brown yarn.
No need to stuff (or just stuff a li�le bit, not more
than 50% of its height).
Last round: fla�en and work through both s�tches
4sc (4). Fasten off, leave a long tail for sewing.
MUZZLE
Make an oval by croche�ng around the
founda�on ch. Start with light beige. Make a
founda�on ch: 4ch.
R1 : From the second ch from hook: 2sc, then
inc3 in the last st. Con�nue on the other
side of the founda�on ch: sc, inc (8)
R2 : inc, sc, 3inc, sc, 2inc (14)
R3 : 14sc (14)
Fasten off, leaving a long tail for sewing. Do an
invisible finish.
BOW
Start with light beige. In a magic ring, make:
3ch, 3dc, 3ch, 2slst, 3ch, 3dc, 3ch, slst.
Tighten the magic ring. Using the yarn tail, make
some turns to create the central part of the bow.
Secure the end. Leave a long tail for sewing.
ASSEMBLY
pull �ght
See the pictures!
- Attach the ears of the �ger cap between R4-7
- Attach the muzzle of the �ger cap between R7-9
(Stuff with fiberfill)
- Attach the arms, between R17-18.
make some
- Attach the bow on R18.
turn to make - Embroider the eyes of the girl using dark brown
the central yarn on R14, 3 st wide, 6 st apart
part of
the bow
- Embroider the eyes of the tiger cap using black
yarn on R6.
- Embroider the nose of the tiger cap on the upper
part of the muzzle, using peach yarn, 1 st wide.
And also the mouth using dark brown yarn (use
1 ply only)
- Embroider the rosy cheeks using peach yarn,
between R15-16
- Embroider some stripes on the cap and body
using dark brown yarn.
R9
R17
R18
3 st wide
6 st apart R14
R15
R16
1 st wide
R4
R7
R6
JOINING THE TIGER AND TIGER Join the last rounds of the �ger and the �ger girl.
Sew them together with orange tail through the
GIRL BL of each piece. To finish, make a knot and hide
the tail.
Flip the �ger and the �ger girl so the ugly sides are
facing you. Tie a knot with the yarn tails from the
magic rings of both �ger and �ger girl, leaving a
space between them.
ugly sides
BL
knot
ugly sides
Congratula�on! your �ger reversible amigurumi is ready. I hope you enjoyed croche�ng them. And if you
like this pa�ern, do not hesitate to give it a review. It will be my big pleasure to see your finished toy with
hashtag #chibiscra�pa�ern, or add a Ravelry project.