The document provides steps to move the X, Y, and T axes away from their zero points and reset their positions, including changing parameter settings to acknowledge the new positions and allow automatic tool offsetting. It involves manually moving each axis to its new position, changing a bit value in parameter 01815, and resetting offsets to complete the process for all three axes.
The document provides steps to move the X, Y, and T axes away from their zero points and reset their positions, including changing parameter settings to acknowledge the new positions and allow automatic tool offsetting. It involves manually moving each axis to its new position, changing a bit value in parameter 01815, and resetting offsets to complete the process for all three axes.
The document provides steps to move the X, Y, and T axes away from their zero points and reset their positions, including changing parameter settings to acknowledge the new positions and allow automatic tool offsetting. It involves manually moving each axis to its new position, changing a bit value in parameter 01815, and resetting offsets to complete the process for all three axes.
2. Do one axis at a time. 3. MDI. 4. OFS (offsets) Settings. 5. Parameter write to (1). 6. Go to parameter settings. 7. Call up parameter 01815. 8. Switch to handle. 9. Move axis by hand to zero point. 10.Switch to MDI. 11.Go to bit 4 on parameter 01815 and make it a (1). 7 6 5 4(APZ) 3 2 1 0 X 1 12.Switch machine off. 13.Switch machine on. 14.Repeat steps 6-10 for y axis. 7 6 5 4(APZ) 3 2 1 0 Y 1 15.Switch machine off. 16.Switch machine on and zero return and do warm up. 17.To move Turret on Turn-I 18.Keeprely 13 7 6 5 4 3 2 1 0 1 0 1 19.Press spindle override to unclamp turret 20.Move turret by hand to tool 1 and clamp with spindle override 21.Keeprely 13 7 6 5 4 3 2 1 0 0 0 0
22.Repeat steps 6-10 for T axis
7 6 5 4(APZ) 3 2 1 0 T 1
23.Go to OFS (offsets) Settings.
24.Parameter write to (0). 25.Restart machine and zero return all axis.