Professional Documents
Culture Documents
TMT Bars Testing
TMT Bars Testing
31.1 Defect Liability Period” for this job shall be as per relevant clause of General Conditions of
Contract (GCC).
Any change in Scope/Extra Item shall be handled as per the relevant and sub-Clauses thereby
of General Conditions of Contract (GCC).
33.1.1 Contractor shall procure these Items as per Annexure-X to this SCC attached in the Bidding
Document with prior intimation to Engineer-in-charge.
In addition to availability of valid MTCs (Manufacturer’s Test Certificates), for each category / size
of structural steel procured, one sample from every 50 MT or part thereof shall be drawn and tested
in approved laboratory. The charges for such testing shall be borne by the contractor.
i) Under 10 mm bars one sample for each 25 MT (or part thereof) for consignment below 100
MT and one sample each 40 MT (or part thereof) for consignment above 100 MT shall be
tested.
ii) For 10 mm to 16 mm bars, one sample for each 35 mm MT (or part thereof) for consignment
below 100 MT and one sample each 45 MT (or part thereof) for consignment above 100MT
shall be tested.
iii) Over 16 mm bars one sample for each 45 MT (or part thereof) for consignment below 100
MT and one sample each 50 MT (or part thereof) for consignment above 100 MT shall be
tested.
TENDER REF ID: 2023_GAIL_162356_1 DATE 26.07.2023 FOR COMPOSITE WORKS FOR
PIPING, CIVIL & STRUCTURAL, MECHANICAL, ELECTRICAL AND INSTRUMENTATION
WORK FOR PRODUCT RECOVERY IMPROVEMENT PROJECT OF LPG UNITS AT GAIL,
VIJAIPUR.
Page 197 of 218