Professional Documents
Culture Documents
HEAVY-DUTY
SURFACE CORE DRILL
TECHNICAL SPECIFICATION
––EDEEP process in place - We work together with our ––High capacity option with more rotation torque and B 1,440 m 4,723 ft • Guard for 8 spooler valve levers
customers through design stages to identify potential 13.6 t pull out capacity TK66 1,674 m 5,491 ft • Guard over remote tram levers
hazards that can be reduced or eliminated through ––High altitude boost system - enables operation N 1,126 m 3,693 ft • Provision for Safe-T-Spin controls
innovative design. above 2,000 m+ (6,560 ft) TK76 1,156 m 3,792 ft • Safety lock on drill / jack lever
––CE marked Tier 4 model available. Meeting all ––Optional accessories - basic jaws, tooling required to H 754 m 2,473 ft • Alarm during jack leg operation
requirements of the European Union drill in N, H and P P 509 m 1,670 ft
––Hydraulically operated left-hand and right-hand ROTATION UNIT Engine filtration Standard plus remote fuel filter
––Tier 3 or Tier 4 diesel engine models available Hollow spindle - ID (N) 120 mm 4.73 in
––“P” size rotation unit with chuck drive and hollow Number of jaws 5 POWER UNIT DIESEL STAGE 5 / TIER 4
––Stepless rotation speed control Torque @ 75 RPM 3212 Nm 2369 lbf ft Diesel engine Cummins B6.7 (inline 6 cylinder)
––Pilot hydraulic controls Torque @ 900 RPM 646 Nm 477 lbf ft Power 142 kW 190 hp
––Self-propelled drill unit Torque @ 1500 RPM 316 Nm 233 lbf ft Emission rating EU STAGE 5 / Tier 4
––One rod clamp can support B, N, H, P and S rod sizes, Rotation speed 0 to 1,500 RPM Engine filtration Standard plus remote fuel filter
system and mast platform ROD HOLDER / ROD CLAMP Hydraulic filtration Full flow 10 μm rated return oil filter
––Fits in a closed 40 ft high cube closed container Metric Imperial Maximum working
Number of jaws 2 pressure (rotation 265 bar 3,844 psi
––Wireline spooler - increases life of rope and uptime
hydraulic oil)
via smooth rewinding Gripping range 44.5 - 177.8 mm 1.75 - 7 in
Maximum oil flow 200 l/min 53 USgal/min
––Fire suppression system - suitable for subzero Gripping range - Jaw
B, N, H, P and S
sets Tank volume
climates (hydraulic oil)
400 l 106 USgal
Maximum opening
224 mm 8.81 in Cooler Engine Jacket water
(no jaws)
Hydraulics Air
Hydraulically operated and self energizing rod holder. Electrical system 24 V
Highest quality axial and radial piston pumps and motors used in
three independent circuits. Larger than typical hoses and control
FEED valve sizes used for maximum efficiency.
Metric Imperial
Feed force 53.2 kN (5.5 t) 12,000 lbf
Pull force 91.2 kN (9.3 t) 20,500 lbf
Feed length (stroke) 3.45 m 11 ft 3 in
Speed (up and down) 30 m/min 100 ft/min
Flow fuse hose burst Prevents uncontrolled dropping of rotation
system head if hoses fails.
CRAWLER TRACKS
WIRELINE WINCH • Radio controlled removing the need for ROPS (roll-over protective
Pull capacity 7.8 kN 1,750 lbf structure) operator compartment
Speed 270 m/min 887 ft/min • 2 speed track controls included
Cable capacity 1,000 m x 5 mm 2,380 ft x 3/16 in • Inclinometers for rig inclination angles
Increases life of rope and uptime via smooth • Electronic throttle control
Wireline spooler
rewinding • Sub-structure has a tow hook built into the design
Wireline wiper and Keeps rig cleaner and prevents overwind • Maximum speed of 2,6 km/h
safety cut out during wireline operations • Triple grouser track configuration
• Ground pressure: 0,075 N/mm2
B
Incorporates hydraulic park brake to prevent creeping during survey
and other activities.
A C
Note: This option will increase the weight of the SANDVIK DE712
Photos and illustrations in this brochure may show equipment with optional
extras. Equipment, equipment specifications and data on this data sheet subject
to change without notice. Please contact a Sandvik representative for clarification
on equipment, equipment specifications and data.
MINING.SANDVIK.COM