The NC 01-IP infusion pump is an automatic infusion device used to control the amount of fluid entering the blood circulation through blood vessels over a set period of time. It can accurately control the amount of fluid delivered to the patient. Key features include a flow rate range of 0.01-1800 mL/h, battery life of over 9 hours, and dual CPUs for faster and more stable performance. It has various modes like intermittent, relay, and variable rate and can detect occlusion through precise ultrasonic wave detection to prevent alarm errors.
The NC 01-IP infusion pump is an automatic infusion device used to control the amount of fluid entering the blood circulation through blood vessels over a set period of time. It can accurately control the amount of fluid delivered to the patient. Key features include a flow rate range of 0.01-1800 mL/h, battery life of over 9 hours, and dual CPUs for faster and more stable performance. It has various modes like intermittent, relay, and variable rate and can detect occlusion through precise ultrasonic wave detection to prevent alarm errors.
The NC 01-IP infusion pump is an automatic infusion device used to control the amount of fluid entering the blood circulation through blood vessels over a set period of time. It can accurately control the amount of fluid delivered to the patient. Key features include a flow rate range of 0.01-1800 mL/h, battery life of over 9 hours, and dual CPUs for faster and more stable performance. It has various modes like intermittent, relay, and variable rate and can detect occlusion through precise ultrasonic wave detection to prevent alarm errors.
Laju Aliran Infus 0.01-1800 mL/h, resolusi 0.01 mL/h
Laju Volume Infus 0.01-9999.99 mL, resolusi 0.01 mL Akurasi Infus ± 5% Kisaran laju aliran adalah 1 mL/jam ~ 1800 mL/jam, resolusi 1 mL/jam, Purge/Bolus jumlah totalnya terus menerus disesuaikan mulai 1 mL hingga 9999 mL, dengan resolusi 1 mL. Laju aliran infus 10 mL/jam = 3 mL/jam NC 01-IP Infuse pump adalah perangkat infus otomatis Laju aliran infus 1 mL/jam dan yang digunakan untuk mengatur jumlah cairan yang < 10 mL/jam = 1 mL/jam; masuk ke dalam sirkulasi darah melalui pembuluh KVO Flow Rate Laju aliran infus kurang dari darah, yang dilakukan secara terus menerus pada 1mL/jam, pengaturan waktu tertentu. Cairan yang dimasukan ke Laju aliran KVO = setel laju aliran dalam tubuh pasien dapat dipastikan terkontrol secara infus; akurat. 00 h 00 min - 99 h 59 min, dengan Pengaturan Waktu resolusi 1 min. Keunggulan Terendah : 40 kPa ± 20 kPa Ambang Tekanan Menengah : 80 kPa ± 20 kPa Oklusi Tertinggi : 120 kP ± 30 kPa • Mudah digunakan. Laju aliran • Layar TFT touchscreen 4,3 inci. Kecepatan aliran + volume total • Arsitektur dual CPU, lebih cepat dan stabil. Kecepatan aliran + waktu • Clamp otomatis untuk mencegah self- ow Volume total + mode waktu • Deteksi presisi gelombang ultrasonik, untuk mencegah Perpustakaan obat kesalahan alarm gelembung Berat badan Mode Infus Kecepatan jatuh Gradien Kecepatan variabel Spesifikasi Teknis Dosis pertama Intermiten Relai Dimensi 131mm × 95mm × 168mm (PxLxT) Tekenan Infus Min 150 kPa Bobot 1,5 Kg > 9 jam terus menerus (full charge), 100V-240 V, 50/60 Hz (NPS), Baterai Waktu Pakai Baterai pada laju aliran infus menengah Sumber Daya listrik Lithium (rechargeable) dan 5 jam di bawah laju maksimum. Konsumsi Daya <55 VA Suhu sekitar transportasi dan Laju Aliran Maksimum 1800 (ml/jam) penyimpanan : -20oC ~ +60oC, Suhu sekitar untuk operasi : +18oC ~ +35oC Suhu lingkungan, Kelembaban sekitar untuk Gambar kelembaban dan transportasi, penyimpanan, dan tekanan pengoperasian : 20% - 90% Tekanan sekitar untuk transportasi, penyimpanan, dan pengoperasian : 700 hPa - 1060 hPa