Professional Documents
Culture Documents
Ca7 Commands
Ca7 Commands
PSI/ZOOM
Cycle Event CA7 Command or Alternative
Monitor cycle LQ (retype “L” to refresh screen).
LQ,SYS=* (* = SYSID if multiple systems executing).
LACT (displays jobs in active queue only; cannot see abended jobs).
/DISPLAY,ST=JCL (provides index numbers for CA7 JCL libraries).
Confirm job executed LPRRN,JOB=CCOP****
Research triggers/predecessors LJOB,JOB=CCOP****,LIST=ALL
Review SYSOUT SYSVIEW or SAR depending on MSGCLASS job designation.
Put job on hold HOLD,JOB=CCOP**** (job must be in queue; alternative to QM.1).
DB.1 (under Requirements change HOLD from ‘N’ to ‘Y’).
DB.3.6 (creates artifical user hold predecessor for job to be held).
DB changes may be done prior to job execution . Any DB changes are
treated as permanent so one-time changes must be reversed after the
cycle. **Access to DB panels will be restricted in model and production.
Free job placed on hold 1.) QM.1 <enter> ; type in name of job <enter>
2.) type in ‘X’ next to job name (X=RQMT POST) <enter>
3.) post requirement by typing ‘X’ to the left of reason(s) for hold
See Attachment ‘A’ and ‘B’ for examples.
Delete job from queue CANCEL,JOB=CA7job#,FORCE=YES,REASON=????????
(CA7job# does not correspond to SYSVIEW job#; alternative to QM.1).
Restart abended job 1.) QM.1 <enter>; type in name of job <enter>
2.) type ‘E’ next to jobname to JSCAN JCL and review restart
instructions
3.) follow restart instructions and save member or exit (PF3)
4.) type ‘F’ next to jobname to restart <enter>
5.) type in the Reason for restart
6.) type ‘X’ next to Resubmit for Production to restart
See Attachment ‘C’ for an example of a restart.
Force complete job 1.) QM.1 <enter>; type in name of job <enter>
2.) type ‘F’ next to jobname to force complete <enter>
3.) type in the Reason for forcing the job complete
4.) type ‘X’ next to Force Complete
Force in CCO*1MIS or 1.) copy generic JCL into appropriate override library (production or
Force in MKA*1MIS MO)
2.) change job and user card information as needed in JCL and JSCAN
*(SCHID is not necessary) 3.) DEMANDH,JOB=CCO*1MIS (demand in generic job on hold)
4.) QM.1 <enter>; type in CCO*1MIS jobname <enter>
5.) type in ‘X’ next to job name (X=RQMT POST) <enter>
6.) post requirement by typing ‘X’ to the left of reason for hold
See Attachment ‘E’ for listing of override libraries.
Force in On Request job 1.) DEMANDH,JOB=CCOP**** (demand in an on request job on hold)
2.) follow above steps #4 through #6 substituting your job name
Run job with an override 1.) copy desired JCL into appropriate override library (production or
MO)
*PSI/ZOOM for production 2.) enter PSI/ZOOM (E.7.P; 5 - DB maintenance; 6 - Override edit)
3.) cut and paste IOCARD member before first line of your job’s JCL
4.) change name and dates as needed; Save member or End to set flag
5.) return to CA7 and follow steps #3 through #6 substituting your job
See Attachments ‘F’, ‘G’ and ‘H’ for IOCARD members and PSI/ZOOM.
Insert one-time job or new *Model - coordinate with SE(s) monitoring model office. You’ll need to
permanent job(s) into cycle provide information as to how your new job should fit into the existing
cycle flow. For example, what job will trigger your new job; what job(s)
will your new job trigger, if any; when will your new job execute (daily,
monthly, etc.); and what job(s) must complete before your new job can
execute. *Production - will be done through PSI ZOOM. Details
pending .
/opt/scribd/conversion/tmp/scratch6104/57872700.doc
Last Updated by : Richard Goode
CA7 COMMANDS
PSI/ZOOM
ATTACHMENT A
------------- CA-7 QUE UE MAINTENAN CE - CPU JOBS STATUS PRO MPT ----------
FUNCTION = = = > (LEAVE BLANK EXCEPT TO TRANSFER)
ATTACHMENT B
FUNCTIONS:
C= C A N C E L
F= RE ST A R T
H=H OL D
J=JCLOVRD
P=RSVP
Q =RE Q U E UE
R=RELEASE
S=SUBT M OFF
U= UP DATE
V=VERIFY
X= R Q M T POST
E=E DIT QJCL
PRO GR A M: Q M 20 MS G-INDX: 00 -- Q M.1-X -- 98.091 / 17:57:27
MESSAGE: ENTER FUNCTION IN 'F'FIELD OR ENTER A CO M M A N D ON THE TOP LINE
ATTACHMENT C
/opt/scribd/conversion/tmp/scratch6104/57872700.doc
Last Updated by : Richard Goode
CA7 COMMANDS
PSI/ZOOM
JOB: CCO M D F RF CO DE: LAST-STEP: MC NT: 004
CA-7#: 8652 JES#: *NA* NO DE-NA ME: LOCAL
-- x -- RES U B M IT FO R PR O D U C TI O N
-- -- FO R C E C O M P L E T E
ATTACHMENT D
ATTACHMENT E
ATTACHMENT F
/opt/scribd/conversion/tmp/scratch6104/57872700.doc
Last Updated by : Richard Goode
CA7 COMMANDS
PSI/ZOOM
System Na m e = = = > CCO M M C O M
Queue Activity
1 QUE UES - Request,Ready, and Active queue information
2 ABENDS - Production abends, fails,errors,and requeues
3 PRIOR RUN - PriorRun queue information
SpecialActivity
L LOG DISPLAY - Browse CA7 on-line log
S SYSTEM AUTH O RITY - Add, delete,and listsystem ID authority
T TUTORIAL - Display information about PSI V4.1
X EXIT - Terminate this session
Line Co m m a n ds:
S Select Override Library
System
Na m e Override Library
---------------------------------------------------------------------------
s CC O M M C O M M C C O M . C O M S C.Z O V R R D E
******************************* BOTTO M OF DATA *******************************
ATTACHMENT G
/opt/scribd/conversion/tmp/scratch6104/57872700.doc
Last Updated by : Richard Goode
CA7 COMMANDS
PSI/ZOOM
.......................
BRO W S E -- M C C O M . C O M S C.Z O V R R D E(IOCA R D ) - 01.00 ------ LINE 00000000 CO
CO M M A N D = = = > SCROLL
********************************* TOP OF DATA ***********************
//*IN=03/11/1998,OUT=03/31/1998,SE=SCHLACK
******************************** BOTTO M OF DATA **********************
ATTACHMENT H
EDIT ---- M C C O M.C O M S C.ZOVRR DE(CCO M 1 G D G) - 06.24 -------------- COLU M N S 001 072
CO M M A N D = = = > SCROLL = = = > PAGE
****** ***************************** TOP OF DATA ******************************
= = M S G > *** 01 ERR O R S FO U N D
= = M S G > *** USE THE 'LOCATE SPECIAL' PRI M A R Y CO M M A N D TO PO SITION TO THE
ERR O R S
= = M S G > ***
= = M S G > *** SA M P L E IN/OUT CAR D:
= = M S G > *** //*IN= M M/ D D/Y Y Y Y,O U T = M M / D D/Y Y Y Y,SE = S E N A M E {,P H O N E = P H O N E
NU M B E R}
000001 //*IN=04/02/1998,OUT=04/02/1998,SE=
= = M S G > ER R - MISSIN G VAL U E FOR 'SE=' KEY W O R D, SE N A M E IS RE Q UIRE D
000002 //CCO M1 G D G JOB (2JRE13,B117),'CREATE GDG BASE',
000003 // CLASS= X,USER = C C O M O M M, M S G CLASS = X
000004 //*
000005 /*JOBPAR M P= M C C O M O M
000006 //*
/opt/scribd/conversion/tmp/scratch6104/57872700.doc
Last Updated by : Richard Goode