You are on page 1of 28

Test Pattern

(0999DJM262103230003) )/999DJM2621/323///3)
DISTANCE LEARNING PROGRAMME JEE(Main)
TEST # 03
(Academic Session : 2023 - 2024) 06-08-2023
JEE(MAIN) : LEADER TEST SERIES / JOINT PACKAGE COURSE
Time : 3 Hours 12th Undergoing/Pass Students Maximum Marks : 300
Test Type : Unit Test #03
READ THE INSTRUCTIONS CAREFULLY/ Ïi;k bu funsZ'kksa dks /;ku ls i <+sa
Important Instructions : egRoiw . kZ funs Z ' k :

ds vuqns'kksa ds fcuk eqgjsa u rksM+s


1. Immediately fill in the form number on this page of the
1. ijh{kk iqfLrdk ds bl i`"B ij vko';d fooj.k uhys@dkys ckWy ikbaV
Test Booklet with Blue/Black Ball Point Pen. Use of pencil
is strictly prohibited.
isu ls rRdky HkjsaA isfUly dk iz;ksx fcYdqy oftZr gSaA
2. The candidates should not write their Form Number 2. ijh{kkFkhZ viuk QkeZ ua - (fu/kkZfjr txg ds vfrfjä) ijh{kk
anywhere else (except in the specified space) on the Test
iqfLrdk@mÙkj i= ij dgha vkSj u fy[ksaA
Booklet/Answer Sheet.
3. The Test Booklet consists of 90 questions. 3. bl ijh{kk iqfLrdk esa 90 iz'u gaSA
4. There are three parts in the question paper 1,2,3 4. bl ijh{kk iqfLrdk esa rhu Hkkx 1, 2, 3 gSa] ftlds izR;sd Hkkx esa HkkSfrd
consisting of Physics, Chemistry and Mathematics foKku] jlk;u foKku ,oa xf.kr ds 30 iz'u gSa vkSj izR;sd fo"k;
having 30 questions in each subject and each subject
esa 2 [k.M gSA
having Two sections.
(i) [k.M-I esa 20 cgqfodYih; iz'u gAS ftuds ds oy ,d fodYi

DO NOT BREAK THE SEALS WITHOUT BEING INSTRUCTED TO DO SO BY THE INVIGILATOR/fujh{kd


(i) Section-I contains 20 multiple choice questions
with only one correct option. lgh gSaA
Marking scheme : +4 for correct answer, 0 if not
attempted and –1 in all other cases.
va d ;ks tuk : +4 lgh mÙkj ds fy,] 0 iz;kl ugha djus ij
(ii) Section-II contains 10 Numerical Value Type rFkk –1 vU; lHkh voLFkkvksa esaA
questions. Attempt any 5 questions. First 5 (ii) [k.M -II es a 10 la [;kRed eku iz d kj ds iz 'u gS A fdUgh 5
attempted questions will be considered for marking. iz'uksa dk mÙkj nhft,A fd;s x;s iz'uksa esa ls dsoy izFke ik¡p
Marking scheme : +4 for correct answer, 0 if not iz'uksa dks gh vad fn;s tk;saxsA
attempted and –1 in all other cases. va d ;ks tuk : +4 lgh mÙkj ds fy,] 0 iz;kl ugha djus ij
5. Use Blue/Black Ball Point Pen only for writting rFkk –1 vU; lHkh voLFkkvksa esaA
particulars/marking responses on Side–1 and Side–2 of the
5. mÙkj i= ds i`"B–1 ,oa i`"B–2 ij okafNr fooj.k ,oa mÙkj vafdr djus
Answer Sheet. Use of pencil is strictly prohibited.
gsrq dsoy uhys@dkys ckWy ikbaV isu dk gh iz;ksx djsAa isfUly dk iz;ksx
6. No candidate is allowed to carry any textual material, loZFkk oftZr gSA
printed or written, bits of papers, mobile phone any 6. ijh{kkFkhZ }kjk ijh{kk d{k @ gkWy esa ifjp; i= ds vykok fdlh Hkh izdkj
electronic device etc, except the Identity Card inside the dh ikB~; lkexzh eqfær ;k gLrfyf[kr dkxt dh ifpZ;ksa] eksckby
examination hall/room. Qksu ;k fdlh Hkh izdkj ds bysDVªkfud midj.kksa ;k fdlh vU; izdkj
7. Rough work is to be done on the space provided for this dh lkexzh dks ys tkus ;k mi;ksx djus dh vuqefr ugha gSaA
purpose in the Test Booklet only. 7. jQ dk;Z ijh{kk iqfLrdk esa dsoy fu/kkZfjr txg ij gh dhft;sA
8. On completion of the test, the candidate must hand over 8. ijh{kk lekIr gksus ij] ijh{kkFkhZ d{k@gkWy NksM+u s ls iwoZ mÙkj i= d{k
the Answer Sheet to the invigilator on duty in the Room/ fujh{kd dks vo'; lkSai nsaA ijh{kkFkhZ vius lkFk bl ijh{kk iq fLrdk
Hall. However, the candidate are allowed to take away dks ys tk ldrs gSaA
this Test Booklet with them. 9. mÙkj i= dks u eks M+ s a ,oa u gh ml ij vU; fu'kku yxk,s aA
9. Do not fold or make any stray marks on the Answer Sheet. 10. g = 10 m/s2 iz;q Dr djs a ] tc rd fd vU; dks bZ eku ugha
10. Take g = 10 m/s2 unless otherwise stated. fn;k x;k gks A
Name of the Candidate (in Capitals)
ijh{kkFkhZ dk uke (cM+s v{kjksa esa) :
Form Number : in figures
QkWeZ uEcj : vadksa esa
: in words
: 'kCnksa esa
Centre of Examination (in Capitals) :
ijh{kk dsUæ (cM+s v{kjksa esa) :
Candidate’s Signature : Invigilator’s Signature :
ijh{kkFkhZ ds gLrk{kj : fujh{kd ds gLrk{kj :
Your Target is to secure Good Rank in JEE(Main) 2024
ALLEN CAREER INSTITUTE Pvt. Ltd.
Registered & Corporate Office : ‘SANKALP’, CP-6, Indra Vihar, Kota (Rajasthan) INDIA-324005
Ph. : +91-744-3556677, +91-744-2757575|E-mail : dlp@allen.ac.in|Website : www.dlp.allen.ac.in, dsat.allen.ac.in

LTS / Page 1/28


Topic : Newton Laws of Motion and Friction & Gravitation
PART-1 : PHYSICS

SECTION-I : (Maximum Marks: 80) खण्ड -I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has 4 इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
options for correct answer. Multiple-Choice Questions बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
(MCQs) Only one option is correct. For each question, के लिए, अंक निम्नानुसार दिए जाएंगे:

marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
1. A horizontal force of 10N is necessary to just 1. एक गट्टे को दीवार के सहारे स्थिर रखने के लिए
hold a block stationary against a wall. The ठीक 10 N का क्षैतिज बल आवश्यक है। दीवार
coefficient of friction between block and wall is तथा गट्टे के मध्य घर्षण गुणांक 0.2 है तो गट्टे का
0.2. The weight of block is:- भार है :-

(A) 20 N (B) 50 N (C) 100 N (D) 2N (A) 20 N (B) 50 N (C) 100 N (D) 2N
2. A 40 kg slab (B) rests on a smooth floor as 2. ए क 4 0 k g की प ट्टि का ( B ) चि त्रा नु सा र चि क नी
shown in figure. A 10 kg block (A) rests on स त ह प र स्थि त है । ए क 1 0 k g का ब् लाॅ क
the top of  the slab. The static coefficient of ( A ) प ट्टि का के ऊ प र   स्थि त है । प ट्टि का व
friction between slab and block is 0.6 while ब् लाॅ क के म ध् य स् थै ति क घ र्ष ण गु णां क 0 . 6 है
the kinetic friction coefficient is 0.4. The ज ब कि ग ति क घ र्ष ण गु णां क 0 . 4 है । ब् लाॅ क
block (A) is acted upon by a horizontal force ( A ) प र क्षै ति ज ब ल 1 0 0 न् यू ट न ल गा या जा ता
100 N. If g = 9.8 m/s2, the resulting है । य दि g = 9 . 8 मी / से 2 है तो प ट्टि का ( B )
acceleration of the slab (B) will be :- का प रि णा मी त् व र ण हो गा : -

(A) 0.98 m/s2 (B) 1.47 m/s2 (A) 0.98 m/s2 (B) 1.47 m/s2
(C) 1.52 m/s2 (D) 6.1 m/s2 (C) 1.52 m/s2 (D) 6.1 m/s2

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 2/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
3. These blocks A, B and C of equal mass m are placed 3. चित्र में दर्शाए अनुसार समान द्रव्यमान  m के तीन ब्लाॅक
one over the other on a smooth horizontal ground as A, B व C एक के ऊपर एक चिकनी क्षेतिज सतह पर
shown in figure. Coefficient of friction between any
two blocks of A, B and C is 1/2. The maximum स्थित है, कोई भी दो ब्लाॅक A, B एवं C के मध्य घर्षण
value of mass of block D so that the blocks A, B and गुणांक  1/2 है। ब्लाॅक D का अधिकतम द्रव्यमान ताकि
C move without slipping over each other is :-  A, B व C बिना स्लिप हुए गति कर सके , है :-

(A) 6m (A) 6m
(B) 5m (B) 5m
(C) 3m (C) 3m
(D) 4m (D) 4m
4. A block of mass m lying on a rough horizontal 4. m द्रव्यमान का एक ब्लाॅक एक रैंफ क्षैतिज सतह पर रखा
plane is acted upon by a horizontal force P and हुआ है। इस ब्लाॅक पर एक क्षैतिज बल P और ऊर्ध्वाधर से θ
another force Q inclined at an angle θ to the कोण बनाता हुआ दूसरा बल Q चित्रानुसार लग रहे है। यह
vertical. The block will remain in equilibrium if the ब्लाॅक साम्यावस्था में रहेगा यदि सतह और ब्लाॅक के मध्य
coefficient of friction between it and the surface is :- घर्षण गुणांक निम्न हो :-

P + Q sin θ P + Q sin θ
(A) (A)
mg + Q cos θ mg + Q cos θ
P cos θ + Q P cos θ + Q
(B) (B)
mg − Q sin θ mg − Q sin θ
P + Q cos θ P + Q cos θ
(C) (C)
mg + Q sin θ mg + Q sin θ
P sin θ − Q P sin θ − Q
(D) (D)
mg − Q cos θ mg − Q cos θ

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 3/28
5. What will be the acceleration of blocks and tension 5. प्रदर्शित चित्र में ब्लाकों का त्वरण तथा 2kg तथा 5kg
in the string connecting the blocks 2kg and 5kg for द्रव्यमान के ब्लाॅकों को जोड़ने वाली रस्सी में तनाव
the given figure :- होगा :-

(A) 14 m/s2, 120 N (A) 14 m/s2, 120 N

(B) 4m/s2, 70 N (B) 4m/s2, 70 N

(C) 4 m/s2, 30 N     (C) 4 m/s2, 30 N    

(D) 14 m/s2, 140 N (D) 14 m/s2, 140 N

6. The total mass of an elevator with a 80 kg man in it 6. 80 kg द्रव्यमान के एक आदमी के साथ एक लिफ्ट
is 1000 kg. This elevator moving upward with a का कु ल द्रव्यमान 1000 kg है। 8 m/sec की चाल से
speed of 8 m/sec, is brought to rest over a distance ऊपर की ओर चल रही इस लिफ्ट को 16m की दूरी में
of 16m. The tension T in the cables supporting the रोका जाता है। इस लिफ्ट को उठाने वाले तारों में तनाव
elevator and the force exerted on the man by the व लिफ्ट के तल द्वारा मनुष्य पर आरोपित बल क्रमशः
elevator floor will respectively be :-  होंगे :- 

(A) 7800 N, 624 N (A) 7800 N, 624 N

(B) 624 N, 7800 N (B) 624 N, 7800 N

(C) 11800 N, 624 N (C) 11800 N, 624 N

(D) 624 N, 78 N (D) 624 N, 78 N

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 4/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
7. A block of mass m is on an inclined plane of angle θ . 7. m द्रव्यमान का एक गुटका एक आनत तल पर, जो क्षैतिज से θ
The coefficient  of friction between the block and the कोण पर है, रखा है। तल व गुटके के बीच घर्षण गुणांक μ है

plane is μ and tan θ > μ . The block is held stationary (tan θ > μ ) गुटके को आनत तल के समानान्तर एक P बल
by applying a force P parallel to the plane. The लगाकर स्थिर अवस्था में रखा गया है। बल की दिशा तल पर ऊपर
direction of force pointing up the plane is taken to be की ओर धनात्मक ली गई है। जब P को

positive. As P is varied from P1 = mg (sin θ – μ cos θ ) P1 = mg (sin θ – μ cos θ ) to P13 = mg(sin θ + μ cos θ ),

to P13 = mg(sin θ + μ cos θ ), the frictional force f तक परिवर्तित किया जाता है, तब घर्षण बल f एवं P का ग्राफ
versus P graph will look like ऐसा दिखेगा :-

(A) (A)

(B) (B)

(C) (C)

(D) (D)

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 5/28
8. Figure shows a 5 kg ladder hanging from a string that 8. चित्र में छत से जुड़ी रस्सी से लटकी हुई 5 kg की
is connected with a ceiling and is having a spring एक सीढ़ी दर्शायी गई है तथा यहाँ एक स्प्रिंग तुला भी
balance connected in between. A man of mass 25 kg is जुड़ी हुई है। द्रव्यमान 25 kg वाला एक व्यक्ति सीढ़ी
climbing up the ladder at acceleration 1 m/s2. पर 1 m/s 2 त्वरण से चढ़ रहा है। स्प्रिंग  तुला तथा
Assuming the spring balance and the string to be रस्सी को द्रव्यमानहीन मानते हुए स्प्रिंग तुला का
massless, the reading of the spring balance is :- पाठ् यांक होगा :-

(A) 30 kg (B) 32.5 kg (A) 30 kg (B) 32.5 kg


(C) 35 kg (D) 37.5 kg (C) 35 kg (D) 37.5 kg
9. A heavy uniform chain lies on a horizontal table 9. एक क्षैतिज टेबल पर एक समरूप जंजीर रखी है। यदि टेबल
top. If the coefficient of friction between the व जंजीर के मध्य घर्षण गुणांक 0.25 है तो जंजीर का
chain and the table surface is 0.25, then the वह  अधिकतम भाग जो कि टेबल से नीचे बिना फिसले
maximum fraction of the length of the chain that लटक सके -
can hang over one edge of the table is-
(A) 20% (B) 25% (C) 35% (D) 15% (A) 20% (B) 25% (C) 35% (D) 15%
10. What will be the acceleration of 20 kg blocks.  If 10. यदि बन्दर 2 m/s 2 के त्वरण से रस्सी पर ऊपर चढ़ता
the monkey climbs up the rope with acceleration of है तो  20 kg   के ब्लाक का त्वरण कितना होगा यदि
2m/s2. If all surfaces are smooth string and pulley सभी सतह घर्षण रहित है। रस्सी तथा घिरनी द्रव्यमान
are light.:- हीन है। 

(A) 2 m/s2 (B) 3 m/s2 (C) 4 m/s2 (D) 0 (A) 2 m/s2 (B) 3 m/s2 (C) 4 m/s2 (D) 0
LEADER TEST SERIES / JOINT PACKAGE COURSE
0999DJM262103230003

LTS - Page 6/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
11. A projectile is projected with velocity kve in 11. पृथ्वी तल से एक प्रक्षेप्य को आकाश में ऊपर की
vertically upward direction from the ground into ओर kv e वेग से प्रक्षेपित किया जाता है ( यहाँ v e पलायन
the space. (ve is escape velocity and k < 1). If air वेग है, एवं  k < 1)। यदि वायु घर्षण को नगण्य मानें
resistance is considered to be negligible then the तो प्रक्षेप्य पृथ्वी के के न्द्र से कितनी अधिकतम ऊँ चाई तक
maximum height from the centre of earth to which पहुँचेगा :- (R = पृथ्वी की त्रिज्या)
it can go, will be : (R = radius of earth)
R R R R
(A) (B) (A) (B)
k2 +1 k2 −1 k2 +1 k2 −1
R R R R
(C) (D) k+1
(C) (D)
1 − k2 1 − k2 k+1

12. At a given place where acceleration due to gravity 12. एक स्थान पर गुरूत्वीय त्वरण 'g' मी/सै2 है। यहाँ

is 'g' m/sec2, a sphere of lead of density


'd' किग्रा/मी3  घनत्व का सीसे का एक गोला ρ किग्रा/मी3
'd' kg/m3 is gently released in a column of liquid घनत्व के द्रव स्तम्भ में धीरे से छोड़ दिया जाता है। यदि d > ρ
of density ' ρ ' kg/m3. If d > ρ , the sphere will:- हो, तो गोला:-
2 2
(A) Fall vertically with an acceleration 'g' m/sec (A) ऊर्ध्वाधर दिशा में बिना 'g' मी/सै  के त्वरण से गिरेगा

(B) Fall vertically with no acceleration (B) ऊर्ध्वाधर दिशा में बिना त्वरण के गिरेगा
d−ρ d−ρ
(C) Fall vertically with an acceleration g ( ) (C) ऊर्ध्वाधर दिशा में g ( ) त्वरण से गिरेगा  
d d

ρ ρ
(D) Fall vertically with an acceleration g ( ) (D) ऊर्ध्वाधर दिशा में g ( )  त्वरण से गिरेगा  
d d

13. Ve and Vp denote the escape velocities from the 13. एक ग्रह की त्रिज्या पृथ्वी की त्रिज्या से दुगुनी और औसत
earth and another planet having twice the radius and घनत्व, पृथ्वी के घनत्व के बराबर है। यदि Ve और  Vp क्रमशः
the same mean density as that for the earth. Then :- पृथ्वी और ग्रह के लिए पलायन वेग के मान हैं तब :- 
(A) Ve = Vp (A) Ve = Vp
(B) Ve = 2 Vp (B) Ve = 2 Vp
(C) Ve = Vp/2 (C) Ve = Vp/2
(D) Ve = Vp /  √ 2 (D) Ve = Vp /  √ 2

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 7/28
14. An asteroid of mass m is approaching earth initially 14. m द्रव्यमान का एक उल्का पिण्ड पृथ्वी की ओर गतिशील है,
at a distance of 10 Re from surface of earth and इसकी पृथ्वी से प्रारम्भिक दूरी 10 Re तथा प्रारम्भिक वेग
speed Vi. It hits the earth with a speed Vƒ (Re and Vi है। यह पृथ्वी से Vƒ चाल से टकराता है।

Me are radius and mass of earth), then- (जहाँ Re तथा Me पृथ्वी की त्रिज्या तथा द्रव्यमान है), तो -
2Gm 1 2Gm 1
(A) Vf 2 = Vi 2 + ( 1− ) (A) Vf 2 = Vi 2 + ( 1− )
MeR 10 MeR 10
2GMe 1 2GMe 1
(B) Vf 2 = Vi 2 + ( 1+ ) (B) Vf 2 = Vi 2 + ( 1+ )
Re 10 Re 10
2GMe 1 2GMe 1
(C) Vf 2 = Vi 2 + ( 1− ) (C) Vf 2 = Vi 2 + ( 1− )
Re 10 Re 10
2GM 1 2GM 1
(D) Vf 2 = Vi 2 + ( 1− ) (D) Vf 2 = Vi 2 + ( 1− )
Re 10 Re 10
15. A solid sphere of uniform density and radius R applies 15. ए क स मा न घ न त् व त था R त्रि ज् या का ए क ठो स
a gravitational force of attraction equals to F1  on a गो ला इ स के के न् द्र से 2 R दू री प र र खे ए क क ण
particle placed at P, distance 2R from the centre. O of प र F 1   ब ल ल गा ता है । य दि गो ले में चि त्रा नु सा र
the sphere. A spherical cavity of radius R/2 is now R / 2 त्रि ज् या की ए क गु हि का ब ना दी जा ए तो य ह
made in a sphere as shown in figure. The sphere with गो ला उ स क ण प र F 2   ब ल ल गा ता है तो
cavity now applies a gravitational force F2 on the same F 2 / F 1   हो गा -
particle placed at P. The ratio F2/F1 will be -

(A) 1/2 (B) 7/9 (C) 3 (D) 9/7 (A) 1/2 (B) 7/9 (C) 3 (D) 9/7
16. The ratio of the radius of a planet 'A' to that of 16. ग्रह 'A' की त्रिज्या तथा ग्रह 'B' की त्रिज्या का
planet 'B' is 'r'. The ratio of acceleration due to अनुपात 'r' है। इन ग्रहों के गुरूत्वीय त्वरणों का
gravity on the planets is 'x'. The ratio of the अनुपात 'x' है। दोनों ग्रहों से पलायन वेगों का अनुपात
escape velocities from the two planets is : होगा :
r r
(A) xr (B) √ (A) xr (B) √
x x
rx x rx x
(C) √
(D) √ (C) √
(D) √

r r
LEADER TEST SERIES / JOINT PACKAGE COURSE
0999DJM262103230003

LTS - Page 8/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
17. Two bodies of masses m1 and m2 are initially at rest 17. m 1   तथा m 2 द्रव्यमान कें दो पिण्ड प्रारम्भ में अनन्त
at infinite distance apart. They are then allowed to दूरी पर स्थित हैं। तत्प 'pk त् ये दोनों गुरूत्वाकर्षण बल
move towards each other under mutual gravitational के प्रभाव में एक दूसरे की ओर गति करते हैं। दोनों के
attraction. Their relative velocity of approach at a बीच r दूरी होने पर, इनके पास आने का सापेक्ष वेग
separation distance r between them is:- होगा:-
1/2 1/2 1/2 1/2
(m1 − m2 ) 2G (m1 − m2 ) 2G
(A) [ 2G ] (B) [ (m1 + m2 )] (A) [ 2G ] (B) [ (m1 + m2 )]
r r r r
1/2 1/2 1/2 1/2
r 2G r 2G
(C) [ ] (D) [ m1 m2 ] (C) [ ] (D) [ m1 m2 ]
2G(m1 m2 ) r 2G(m1 m2 ) r

18. A sphere of mass M and radius R2 has a concentric  cavity 18. M द्रव्यमान तथा R2  त्रिज्या का गोला चित्रानुसार R1
of radius R1 as shown in figure. The force F exerted by the त्रिज्या के विवर (Cavity) के संके द्रीय है। गोले द्वारा r दूरी
sphere on a particle of mass m located at a distance r from पर स्थिर m द्रव्यमान के कण पर लगने वाला बल
the centre of sphere varies as (0 ≤ r ≤ ∞) : निम्नानुसार परिवर्तित होगा (0 ≤ r ≤ ∞ ) :

(A) (B) (A) (B)

(C) (D) (C) (D)

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 9/28
19. If the earth is a point mass of 6 × 1024 kg revolving 19. यदि पृथ्वी को 6 × 1024kg का बिन्दु द्रव्यमान माना जाए,
around the sun at a distance of 1.5 × 108 km and in जो कि 1.5 × 108 km की दूरी पर स्थित सूर्य के चारों ओर
time T = 3.14 × 107s, then the angular momentum of T = 3.14 × 107  s    में एक पूर्ण चक्कर लगा रहा है,  तो
the earth around the sun is :- सूर्य के चारों ओर पृथ्वी का कोणीय संवेग होगा :-
(A) 1.2 × 1018 kgm2/s (A) 1.2 × 1018 kgm2/s
(B) 1.8 × 1029 kgm2/s    (B) 1.8 × 1029 kgm2/s   
(C) 1.5 × 1037 kgm2/s (C) 1.5 × 1037 kgm2/s
(D) 2.7 × 1040 kgm2/s   (D) 2.7 × 1040 kgm2/s  

20. Suppose, the acceleration due to gravity at the 20. माना पृथ्वी की सतह पर गुरूत्वीय त्वरण 10 m/s2  तथा
earth's surface is 10 m/s2  and at the surface of मंगल ग्रह पर इसका मान 4.0 m/s2 है। 60 किग्रा का एक
Mars it is 4.0 m/s2. A 60 kg passenger goes from यात्री एक नियत वेग से गतिशील अंतरिक्ष यान में पृथ्वी से
the earth to the mars in a spaceship moving with मंगल ग्रह की ओर जाता है। आकाश के अन्य पिण्डों के
a constant velocity. Neglect all other objects in प्रभाव को नगण्य मानने पर चित्र  में प्रदर्शित कौन सा ग्राफ
the sky. Which part of figure best represents the समय t के साथ यात्री के भार(कु ल गुरूत्वाकर्षण बल) को
weight  (net gravitational force) of the passenger सही ढंग से निरूपित करता है।
as a function of time :

(A) A (A) A
(B) B (B) B
(C) C (C) C
(D) D (D) D

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 10/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न
to attempt any 5 questions out of 10. If more than 5 का प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता
questions are attempted, then only first 5 attempted है, तो के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value.


प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन
For each question, enter the correct integer value में, उत्तर को निकटतम पूर्णांक में लिखा जाना चाहिए। )

(In case of non-integer value, the answer should be प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
rounded off to the nearest Integer).
अनुसार किया जाएगा:

Answer to each question will be evaluated पूर्ण अंक           :    +4 यदि सही उत्तर दर्ज किया गया है।

according to the following marking scheme:


शून्य अंक         :    0 यदि कोई भी उत्तर दर्ज नहीं किया गया है।

Full Marks          :   +4 If correct answer is entered.


ऋणात्मक अंक  :    –1 यदि गलत उत्तर दर्ज किया गया है।
Zero Marks        :   0 If the question is unanswered.

Negative Marks  :   –1 If wrong answer is entered.


1. A man of mass 60 kg is standing on a platform of 1. 60 kg द्रव्यमान का एक व्यक्ति 40 kg द्रव्यमान के तख्ते पर
mass 40 kg as shown in figure then what force चित्रानुसार खड़ा है तो व्यक्ति द्वारा रस्सी पर कितना बल
man should apply on rope so that he accelerate up लगाया जाना चाहिए जिससे व्यक्ति तथा तख्ता 2 m/s2 त्वरण
with the platform with acceleration of 2 m/s2. से ऊपर की ओर गति करे।

2. Graph of 1/v versus x for a particle under motion is 2. गति के दौरान 1/v और x के बीच ग्राफ दिखाया गया है, जहाँ
shown as, where v is velocity and x is position. The time v वेग है तथा x स्थिति है । कण के द्वारा x = 4 से x = 12
taken by particle to move from x = 4 to x = 12 m is :- तक पहुँचने में लगा समय :-

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 11/28
3. The force 'F' acting on a particle of mass 'm' is 3. 'm' द्रव्यमान के किसी कण पर आरोपित बल 'F' को
indicated by the force-time graph shown below. बल-समय ग्राफ द्वारा दर्शाया गया है। समय t = 0 से
The change in momentum of the particle over the t = 8s तक के अंतराल में कण के संवेग में परिवर्तन
time interval from zero to 8 s is :- होगा :-   

4. A solid sphere of mass 2 kg is resting inside a cube 4. 2 किग्रा द्रव्यमान का एक ठोस गोला चित्रानुसार एक घन
as shown in the figure. The cube is moving with a के अंदर रखा है। घन वेग →v = 5t ^i + 2t ^j m/s से गति
( )

velocity →v = 5t ^i + 2t ^j m/s. Here t is the time in


( ) कर रहा है, जहाँ t (सैकण्ड में) समय है। सभी सतह घर्षण
second. All surface are smooth. The sphere is at rest रहित हैं। गोला घन के सापेक्ष विरामावस्था में है। गोले
with respect to the cube. The total force exerted by द्वारा घन पर लगाया गया कु ल बल 13 x न्यूटन है। तब x
the sphere on the cube is 13 x Newton, then find x ? होगा ? (g = 10 m/s 2 )
(Take g = 10 m/s2)

5. The minimum force required to start pushing a 5. एक खुरदरे आनत तल (घर्षण गुणांक μ ) पर ऊपर की ओर
body up a rough (frictional coefficient μ ) inclined धक्का देकर एक वस्तु को गतिशील करने में न्यूनतम बल की
plane is F1  while the minimum force needed to आवश्यकता F1  है और इसको नीचे की ओर फिसलने से
prevent it from sliding down is F2. If the inclined रोकने के लिये न्यूनतम बल की आवश्यकता F2  है। यदि
plane makes and angle θ from the horizontal such आनत तल का क्षैतिज से कोण θ इतना है कि tan θ = 2 μ
F1 F1
that tan θ = 2 μ then the ratio  is:- तब अनुपात  है :-
F2 F2
6. The mass of planet is 1/9 of the mass of the earth 6. किसी ग्रह का द्रव्यमान पृथ्वी के द्रव्यमान के 1/9 है तथा
and its radius is half that of the earth. If a body इसकी त्रिज्या पृथ्वी की त्रिज्या की आधी है यदि किसी वस्तु
weight 9 N on the earth. Its weight on the planet का पृथ्वी पर भार 9 N है तो उसका भार उस ग्रह पर होगा :-
would be :- (in N) (N में)

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 12/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
7. Two planets A and B have the same material 7. दो ग्रहों A एवं B का द्रव्यमान घनत्व समान है। यदि ग्रह
density. If the radius of A is twice that of B, then A की त्रिज्या B की दोगुनी है तो पलायन वेग का
the ratio of the escape velocity  vA  is :- अनुपात  vA  होगा:-
 vB  vB

8. Two satellites, A and B, have masses m and 2m 8. दो उपग्रह A व B के द्रव्यमान क्रमशः m तथा 2m है। A
respectively. A is in a circular orbit of radius R, पृथ्वी के चारों ओर R त्रिज्या की वृत्ताकार कक्षा में तथा B,
and B is in a circular orbit of radius 2R around the 2R त्रिज्या की वृत्ताकार कक्षा में है। इनकी गतिज ऊर्जाओं का
earth. The ratio of their kinetic energies, TA/TB, is: अनुपात TA/TB  है :

9. Gravitational force between two masses at a 9. दो द्रव्यमान जो एक दूसरे से d दुरी पर स्थित है उनके   मध्य
distance d apart is 6N. If these masses are taken लगने वाला गुरूत्वाकर्षण बल 6N है यदि इन दोनों द्रव्यमानो
to moon and kept at a same separation, then the को चन्द्रमा पर ले जाया जाए तथा उनके मध्य की दुरी उतनी ही
force between them will become :- रहे तो बल होगा :-

10. Three equal masses of 1 kg each are placed at the 10. 1 kg (प्रत्येक) के तीन द्रव्यमानों को समबाहु त्रिभुज
vertices of an equilateral triangle PQR and a mass PQR के शीर्षों पर रखा गया है तथा एक 2 kg द्रव्यमान
of 2 kg is placed at the centroid O of the triangle त्रिभुज के के न्द्रक O पर रखा है जिसकी त्रिभुज के प्रत्येक
which is at a distance of 2 m from each of the

शीर्ष से दूरी 2m है। 2 kg द्रव्यमान पर आरोपित बल

vertices of the triangle. The force, in newton, (न्यूटन में) होगा :-


acting on the mass of 2 kg is :-

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 13/28
Topic : Chemical Bonding, Thermodynamics - 01 , Thermochemistry , Thermodynamics - 02(Chemical
Thermodynamics & Energetics)
PART-2 : CHEMISTRY

SECTION-I : (Maximum Marks: 80) खण्ड-I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has 4 इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
options for correct answer. Multiple-Choice Questions बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
(MCQs) Only one option is correct. For each question, के लिए, अंक निम्नानुसार दिए जाएंगे:

marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
1. Which of the following process is correct ? 1. कौनसी प्रक्रिया सही है ?
(A) (A)

(B) 2FeSO4 −Δ
→ Fe2 O3  + SO2 ↑ + SO3 ↑ (B) 2FeSO4 −Δ
→ Fe2 O3  + SO2 ↑ + SO3 ↑

Δ Δ
(C) Ca(HCO3 )2 −→ CaCO3 + CO2 ↑ +H2 O (C) Ca(HCO3 )2 −→ CaCO3 + CO2 ↑ +H2 O

(D) Both (B) and (C) (D) (B) तथा (C) दोनों

2. Select wrong statement :- 2. गलत कथन पहचानें :-


(A) A transition metal ion has more polarizing (A) एक संक्रमण धातु आयन की धु्रवण क्षमता समान
power than S-block ions of comparable size आवेश व तुलनात्मक आकार वाले S-खंड आयन से
and charge. अधिक होती है।

(B) Order of solubility in water is


(B) जल में विलेयता का क्रम

          AgF > AgCl > AgBr > AgI          AgF > AgCl > AgBr > AgI

(C) LiCl is soluble in organic solvents         (C) LiCl कार्बनिक विलायकों में विलेय है।

(D) The hydration of ions involves absorption of heat (D) आयनों के जलयोजन में ऊष्मा का अवशोषण होता है।

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 14/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
3. Which is set of paramagnetic molecules or ions? 3. अनुचुम्बकीय अणुओ या आयनों का सेट कौनसा  है?
(A) NO, NO2, O22+, O22– (A) NO, NO2, O22+, O22–
(B) O2+, O2 – , NO, NO2  (B) O2+, O2 – , NO, NO2 
(C) C2, B2, O2, S2 (C) C2, B2, O2, S2
(D) B2, N2, O2, O2 –  (D) B2, N2, O2, O2 – 
4. The hybridization of the central atom will change when : 4. के न्द्रीय परमाणु का संकरण परिवर्तित होता है, जब :
(A) NH3 combines with H+ (A) NH3, H+ से जुड़ता है।
(B) H3BO3 combines with OH – (B) H3BO3, OH – से जुड़ता है।
(C) NH3 forms NH2 – (C) NH3, NH2 – बनाता है।
(D) H2O combines with H+ (D) H2O, H+ से जुड़ता है।
5. Which orbitals overlap to form bond in OF2 ? 5. किन कक्षकों के अतिव्यापन से OF2 का बंध बनता है ?
(A) sp3 – 2p     (B) sp2 – 2p     (A) sp3 – 2p     (B) sp2 – 2p    
(C) sp – 2p (D) p – p (C) sp – 2p (D) p – p
6. Which of the following has highest melting point ? 6. निम्न में से किसका गलनांक सर्वाधिक होगा ?
(A) SF6 (B) NaCl (A) SF6 (B) NaCl
(C) SiC (D) Xe (C) SiC (D) Xe
7. Which of the following molecular orbital has 7. इनमें से कौन सा आण्विक कक्षक B2 अणु के लिए न्यूनतम
lowest energy for B2 molecule? ऊर्जा रखता है?
(A) σ 2px (B) σ 2p

x
(A) σ 2px (B) σ 2p

x

(C) π 2py (D) π 2p



y
(C) π 2py (D) π 2p

y

8. Select incorrect order :- 8. असत्य क्रम पहचानें  :-


(A) NO3 – > NO2 – > NO2+ (N – O bond length) (A) NO3 – > NO2 – > NO2+ (N – O बंध लम्बाई)
(B) HI > HF > HBr > HCl (order of melting point) (B) HI > HF > HBr > HCl (गलनांक का क्रम)
(C) CH4 < CH3Cl < CH2Cl2 < CHCl3 (order of (C) CH4 < CH3Cl < CH2Cl2 < CHCl3 (द्विध्रुव
dipole moment) आघुर्ण का क्रम)
(D) SbH3 > NH3 > AsH3 > PH3 (order of boiling point) (D) SbH3 > NH3 > AsH3 > PH3 (क्वथनांक का क्रम)

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 15/28
9. Which of the following does not have coordinate bonds ? 9. किसमें उपसहसंयोजी बंध उपस्थित नहीं है ?
(A) HNO2 (B) O3 (A) HNO2 (B) O3
(C) NaBF4 (D) NH4Cl (C) NaBF4 (D) NH4Cl
10. An element (X) forms compounds of the formula 10. एक तत्व (X) यौगिक XCl 3 , X 2 O 5 व Ca 3 X 2 तो
XCl3, X2O5 and Ca3X2 but does not for XCl5.
बनाता है लैकिन XCl 5 नहीं बना सकता है। तत्व (X)
Predict element (X) : को पहचाने :
(A) B (B) Al (C) N (D) P (A) B (B) Al (C) N (D) P
11. Find enthalpy of neutralisation of NH4OH  and 11. जलीय विलयन में NH4OH तथा HCN के उदासिनीकरण
HCN in aqueous solution if enthalpy of ionisation की ऐन्थेल्पी की गणना कीजिये यदि NH4OH तथा HCN
of NH4OH and HCN are 7 kJ/mol and 8 kJ/mol. की आयनन की ऐन्थैल्पी 7 kJ/mol तथा 8 kJ/mol है। साथ
also enthalpy of ionisation of H2O is 57.3 kJ/mole. में H2O की आयनन की ऐन्थैल्पी 57.3 kJ/mole है।
(A) – 15 kJ/mol (B) – 42.3 kJ/mol (A) – 15 kJ/mol (B) – 42.3 kJ/mol
(C) +1 kJ/mol (D) 42.3 kJ/mol (C) +1 kJ/mol (D) 42.3 kJ/mol
12. Determine Δ U° at 300 K for the following reaction 12. दिये गये अभिक्रिया एन्थैल्पी मानों के आधार पर निम्नलिखित
using the listed enthalpies of reaction :-
अभिक्रिया के लिए 300 K पर Δ U° का मान है :-
4CO(g) + 8H2(g) → 3CH4(g) + CO2(g) + 2H2O( ℓ )
4CO(g) + 8H2(g) → 3CH4(g) + CO2(g) + 2H2O( ℓ )

C(graphite) + 1  O2(g) → CO(g); Δ H1°= – 110.5 kJ


C(ग्रेफाइट) + 1  O2(g) → CO(g); Δ H1°= – 110.5 kJ

2 2
CO(g) + 1  O2(g) → CO2(g); Δ H2°= – 282.9 kJ
1
CO(g) +  O2(g) → CO2(g); Δ H2°= – 282.9 kJ

2 2
1 1
H2(g) +  O2(g) → H2O( ℓ ); Δ H3°= – 285.8 kJ
H2(g) +  O2(g) → H2O( ℓ ); Δ H3°= – 285.8 kJ

2 2
C(graphite) + 2H2(g) → CH4(g); Δ H4°= – 74.8 kJ C(ग्रेफाइट) + 2H2(g)→ CH4(g); Δ H4°= – 74.8 kJ
(A) – 653.5 kJ (B) – 686.2 kJ (A) – 653.5 kJ (B) – 686.2 kJ
(C) +747.4 kJ (D) None of these (C) +747.4 kJ (D) इनमें से कोई नहीं
13. Two mole of an ideal gas is heated at constant 13. एक आदर्श गैस के दो मोल को स्थिर दाब एक वायुमण्डल पर
pressure of one atmosphere from 27ºC to 27ºC से 127ºC तक गर्म किया गया। यदि

127ºC. If  Cv, m = 20 + 10 –2 T JK –1 mol –1, then Cv, m = 20 + 10 –2 T जूल K –1 मोल –1 हो तो प्रक्रम के


q and Δ U for the process are respectively :- लिए q व Δ U के मान है :-
(A) 6362.8 J, 4700 J (B) 3037.2 J, 4700 J (A) 6362.8 J, 4700 J (B) 3037.2 J, 4700 J
(C) 7062.8 J, 5400 J (D) 3181.4 J, 2350 J (C) 7062.8 J, 5400 J (D) 3181.4 J, 2350 J
LEADER TEST SERIES / JOINT PACKAGE COURSE
0999DJM262103230003

LTS - Page 16/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
14. For a reversible process at T = 300 K, the volume 14. उत्क्रमणीय प्रक्रम के लिये T = 300 K पर, एक आदर्श गैस
of 2 mole of ideal gas is increased from 1 litre to के 2 moles का आयतन 1 litre से 10 litre तक बढ़ता है,
10 litre, the Δ H for isothermal change is :- समतापीय परिवर्तन के लिये Δ H का मान है ?
(A) 11.47 kJ (B) 4.98 kJ      (A) 11.47 kJ (B) 4.98 kJ     
(C) 0  (D) 114.7 kJ (C) 0  (D) 114.7 kJ
15. 2 moles of an ideal diatomic gas is subjected to 15. एक आदर्श द्विपरमाणुक गैस के 2 मोल को निम्न प्रक्रम द्वारा
the following process. Mark the correct option(s).
ले जाया जाता है। सत्य विकल्प होगा-

[Given : R = 2 Cal/mol K] [दिया है : R = 2 Cal/mol K]

(A) w = 0 (B) q = 4480 Cal     (A) w = 0 (B) q = 4480 Cal    


(C) Δ H = 2240 Cal (D) Δ E = 1600 Cal (C) Δ H = 2240 Cal (D) Δ E = 1600 Cal
16. 2 mole of an ideal gas at 27° C temperature is 16. 2 मोल आदर्श गैस 27°C ताप पर 2 लीटर से 20 लीटर तक
expanded reversibly from 2 lit to 20 lit. Find उत्क्रमणीय रूप से प्रसारित की जाती है,  एन्ट्राॅपी परिवर्तन
entropy change (R = 2 cal/mol K) :- होगा (R = 2 cal/mol K) 
(A) 92.1 cal K –1 mol –1     (A) 92.1 cal K –1 mol –1    
(B) 0 cal K –1 mol –1 (B) 0 cal K –1 mol –1
(C) 4 cal K –1 mol –1     (C) 4 cal K –1 mol –1    
(D) 9.2 cal K –1 mol –1 (D) 9.2 cal K –1 mol –1
17. In which of the reaction entropy decreases? 17. निम्न में से किस अभिक्रिया में एन्ट्राॅपी घटती है?
(A) C(s) + O2(g) → CO2(g) (A) C(s) + O2(g) → CO2(g)
(B) H2(g) + I2(g) → 2HI(g) (B) H2(g) + I2(g) → 2HI(g)
(C) PCl5(g) → PCl3(g) + Cl2(g) (C) PCl5(g) → PCl3(g) + Cl2(g)
(D) N2(g) + 3H2(g) → 2NH3(g) (D) N2(g) + 3H2(g) → 2NH3(g)
LEADER TEST SERIES / JOINT PACKAGE COURSE
0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 17/28
18. For the reaction takes place at certain temperature
18. निश्चित ताप पर हो रही अभिक्रिया

NH2COONH4(s) ⇌ 2NH3(g) + CO2(g).


NH2COONH4(s) ⇌ 2NH3(g) + CO2(g) के लिए यदि
If equilibrium pressure is 3X bar then ΔrG° would be :- साम्य दाब 3X बार हो तो Δ rG° का मान है :-
(A) – RT ln 4  – 3RT ln X (A) – RT ln 4  – 3RT ln X
(B) RT ln 4 – 3RT ln X (B) RT ln 4 – 3RT ln X
(C) – 3RT ln X (C) – 3RT ln X
(D) None of these (D) इनमें से कोई नहीं

19. 1/2 A2 + 3/2B2 → AB3, Δ H° = – 20 kJ S° for 19. 1/2 A2 + 3/2B2 → AB3, Δ H° = – 20 kJ

A2, B2 and AB3 are 60, 40 and 50 JK –1 mol –1 A2, B2 तथा  AB3 की S° क्रमशः 60, 40 तथा

respectively then calculate the temperature at 50 JK –1 mol –1 है तो किस ताप पर साम्यावस्था होगी :-
which equilbrium will established :-
(A) 500 K (A) 500 K
(B) 200 K      (B) 200 K     
(C) 1000 K  (C) 1000 K 
(D) All temp. (D) सभी ताप

20. Oxygen gas weighing 64 gm is expanded 20. 30°C पर 64 gm ऑक्सीजन गैस 1 atm से 0.25 atm तक
isothermally and reversibly from 1 atm to
समतापीय एवं उत्क्रमणीय रूप से प्रसारित होती है। गैस को
0.25 atm at 30°C. Calculate entropy change
आदर्श मानते हुये, एण्ट्राॅपी परिवर्तन ( Δ S) की गणना

(in JK –1 mol –1), assuming the gas to be ideal. JK –1 mol –1 के मात्रक में कीजिये।
(A) 18 JK –1 mol –1 (A) 18 JK –1 mol –1
(B) 23 JK –1 mol –1 (B) 23 JK –1 mol –1
(C) 30 JK –1 mol –1 (C) 30 JK –1 mol –1
(D) 15 JK –1 mol –1 (D) 15 JK –1 mol –1

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 18/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न
to attempt any 5 questions out of 10. If more than 5 का प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता
questions are attempted, then only first 5 attempted है, तो के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value.


प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन
For each question, enter the correct integer value में, उत्तर को निकटतम पूर्णांक में लिखा जाना चाहिए। )

(In case of non-integer value, the answer should be प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
rounded off to the nearest Integer).
अनुसार किया जाएगा:

Answer to each question will be evaluated पूर्ण अंक           :    +4 यदि सही उत्तर दर्ज किया गया है।

according to the following marking scheme:


शून्य अंक         :    0 यदि कोई भी उत्तर दर्ज नहीं किया गया है।

Full Marks          :   +4 If correct answer is entered.


ऋणात्मक अंक  :    –1 यदि गलत उत्तर दर्ज किया गया है।
Zero Marks        :   0 If the question is unanswered.

Negative Marks  :   –1 If wrong answer is entered.


1. How many of the following will evolve O2 gas 1. गर्म करने पर इनमें से कितने यौगिक O 2 गैस उत्सर्जित
upon heating ?
करेगें ?

(i) KMnO4                 (ii) Ca(NO3)2   


(i) KMnO 4                   (ii) Ca(NO 3 ) 2    

(iii) Na2SO4              (iv) K2CO3


(iii) Na 2 SO 4                (iv) K 2 CO 3

(v) NaNO3                (vi) (NH4)2 Cr2O7


(v) NaNO 3                  (vi) (NH 4 ) 2 Cr 2 O 7

(vii) NH4NO3            (viii) CaC2O4 (vii) NH 4 NO 3              (viii) CaC 2 O 4


2. In how many of the following species axial d- 2. इनमें से कितनी प्रजातियों में अक्षीय  d-कक्षक संकरण में
orbitals participate in hybridization ?
हिस्सा लेते हैं ?

XeF2, CO2, XeF4, H2CO3, SOF4, SO42– , NO3 – XeF2, CO2, XeF4, H2CO3, SOF4, SO42– , NO3 –
3. How many of the following have one unpaired 3. इनमें से कितने यौगिकों  में एक अयुग्मित e – उपस्थित
electron ?
है?

KO2, O2[BF4], K2O2, O2, N2, NO2, B2H6 KO 2 , O 2 [BF 4 ], K 2 O 2 , O 2 , N 2 , NO 2 , B 2 H 6


4. How many of the following are valid formulaes ?
4. इनमें से कितने मान्य सूत्र है ?

NCl5,  PH5, HI,  ClF7, SF4, BF6 –3, BH4 – , NCl5,  PH5, HI,  ClF7, SF4, BF6 –3, BH4 – ,
B(OH)4 – B(OH)4 –

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 19/28
5. In the formation of XeF5⊕   total number of 5. XeF5⊕   के निर्माण में Xe के कु ल कक्षकों की संख्या जो
orbitals of Xe involved in Hybridisation is :- संकरण में सम्मिलित है :-
6. Standard enthalpies of formation of CO(g), 6. CO(g), CO2(g), N2O(g) तथा N2O4(g)  के निर्माण
CO2(g), N2O(g) and N2O4(g) are – 110, – 393, – 81 की मानक ऐन्थेल्पियाँ क्रमशः – 110, – 393, – 81
and 10 kJ/mole, respectively. Find the Δ rH° for the तथा 10 kJ/mole, है तो अभिक्रिया के लिये  Δ rH° ज्ञात
reaction :
कीजिये।

N2O4(g) + 3CO → N2O(g) + 3CO2(g) N2O4(g) + 3CO → N2O(g) + 3CO2(g)


7. Calculate enthalpy change for the reaction in 7. अभिक्रिया H2(g) + C2H4(g) → C2H6(g)  के लिये
Kcal/mol
एन्थेल्पी परिवर्तन Kcal/mol में ज्ञात कीजिए।

H2(g) + C2H4(g) → C2H6(g)


बन्ध ऊर्जाएं है :-

The bond energies are,

H – H ⇒ 110, C—H ⇒ 100, C—C ⇒ 80 और

H – H ⇒ 110, C—H ⇒ 100, C—C ⇒ 80 &

C=C ⇒ 150 Kcal mol –1 हैं।


C=C ⇒ 150 Kcal mol –1
8. What is the final temperature (in kelvin) of 0.10 8. एक एकल परमाणुक आदर्श गैस के 0.10 मोल का
mole monoatomic ideal gas that performs 75 cal प्रारम्भिक ताप 227ºC है। यह रूद्धोष्म प्रक्रम में 75 कै लोरी
of work adiabatically if the initial temperature is कार्य करती है। गैस का अन्तिम ताप के ल्विन में ज्ञात
227ºC ? (use R = 2 cal/K-mol) कीजिए। (R = 2 cal/K-mol)
9. For the reaction,
9. अभिक्रिया A(g) + 2B(g) → 2C(g) + 3D(g) के लिये
A(g) + 2B(g) → 2C(g) + 3D(g)
27°C पर Δ H = 19.0 KCal है। तो इस अभिक्रिया के लिये
the value of Δ H at 27°C is 19.0 KCal. Calculate
Δ U का मान KCal में ज्ञात कीजिए :-
value of Δ U for the reaction in Kcal :-
10. A process A → B is difficult to occur directly instead it 10. एक प्रक्रम A → B, प्रत्यक्ष रूप से सम्पन्न होने के बजाय
takes place in three successive steps. तीन क्रमागत पदों में सम्पन्न होता है :-

ΔS (A → C) = 50 e.u.
Δ S (A → C) = 50 e.u.

ΔS (C → D) = 30 e.u.
Δ S (C → D) = 30 e.u.

ΔS (B → D) = 20 e.u.
Δ S (B → D) = 20 e.u.

Where e.u. is entropy unit.


जहाँ e.u. एण्ट्रॅापी इकाई है।

Then the entropy change for the process ΔS (A → B) is :- प्रक्रम (A → B) के लिए एण्ट्राॅपी परिवर्तन Δ S है।

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 20/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
Topic : Trigonometric Ratio & Identities , Method of Differentiation & Application of Derivative
PART-3 : MATHEMATICS

SECTION-I : (Maximum Marks: 80) खण्ड-I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has 4 इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
options for correct answer. Multiple-Choice Questions बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
(MCQs) Only one option is correct. For each question, के लिए, अंक निम्नानुसार दिए जाएंगे:

marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks          :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks        :   0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :   –1 If wrong option is selected.
1. If   ϕ (x) = f(x) + f(2a – x) and
1. यदि   ϕ (x) = f(x) + f(2a – x) तथा

f"(x) > 0, a > 0, 0 ≤ x ≤ 2a, then :- f"(x) > 0, a > 0, 0 ≤ x ≤ 2a, तो:-
(A) ϕ (x) increases in (a, 2a) (A) ϕ (x), (a, 2a) में वर्धमान है
(B) ϕ (x) increases in (0, a) (B) ϕ (x),  (0, a) में वर्धमान है
(C) ϕ (x) decreases in (a, 2a)     (C) ϕ (x), (a, 2a) में ह्नासमान है
(D) None (D) कोई नहीं
2. If f(x) = (x – 1)(x – 2)(x – 3) and a = 0, b = 4, 2. यदि f(x) = (x – 1)(x – 2)(x – 3) तथा a = 0, b = 4,
then c the using LMVT is 2 ± λ . Then value of LMVT के प्रयोग से c  2 ± λ . है, तो 450 2  λ का मान

 450 2  λ  must be:-


√ होगा :-
(A) 400 (B) 500  (A) 400 (B) 500 
(C) 600 (D) 700 (C) 600 (D) 700

3. Let  f(x) = 
3. माना  f(x) = 

f(x) can have a minimum at x = 1 is the value of α is :- यदि x = 1 पर f(x) न्यूनतम है तो α का मान होगा -
(A) 1 (A) 1
(B) -1 (B) -1
(C) 0 (C) 0
(D) 2 (D) 2
LEADER TEST SERIES / JOINT PACKAGE COURSE
0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 21/28
4. The number of points in ( – ∞ , ∞ ), for which 4. अन्तराल ( – ∞ , ∞ ) में उन बिन्दुओं की संख्या, जिसके
x2 – x sinx – cosx = 0, is : लिए x2 – x sinx – cosx = 0 है : –
(A) 6 (B) 4 (A) 6 (B) 4
(C) 2 (D) 0 (C) 2 (D) 0
5. The global maximum value of 
5. f(x) = log10(4x3 – 12x2 + 11x – 3), x ∈ [2, 3], का
f(x) = log10(4x3 – 12x2 + 11x – 3), x ∈ [2, 3], is : – निरपेक्ष महत्तम मान है : –
3 3
(A) – 2 log103 (A) – log103
2
(B) 1 + log10 3 (B) 1 + log10 3
(C) log103 (C) log103
3 3
(D)  log103 (D)  log103
2 2
6. The height of a right circular cone of maximum 6. a व्यास के गोले के अन्तर्गत बनने वाले अधिकतम आयतन
volume inscribed in a sphere of diameter a is- के लम्ब वृत्तीय शंकु की ऊँ चाई है-
(A) (2/3)a (A) (2/3)a
(B) (3/4)a (B) (3/4)a
(C) (1/3)a     (C) (1/3)a    
(D) (1/4)a (D) (1/4)a
7 7
7. The tangent to curve y1 = ax2 + bx +  at (1, 2) 7. वक्र y1 = ax2 + bx +  के बिन्दु (1, 2) पर खींची गई स्पर्श
2 2
is parallel to normal at point ( – 2, 2) on curve
रेखा, वक्र y2 = x2 + 6x + 10 के बिन्दु ( – 2, 2) पर खींचे गये
y2 = x2 + 6x + 10, then value of (a – 2b) is  अभिलम्ब के समान्तर है, तो (a – 2b) का मान होगा
(A) 4 (A) 4
(B) – 4 (B) – 4
(C) 2 (C) 2
(D) 6 (D) 6
8. The length of sub-normal to the curve xyn = an+1 8. यदि वक्र xyn = an+1 के किसी बिन्दु पर अधोलम्ब की
is constant then value of n is लम्बाई अचर है, तब n बराबर होगा
(A) – 2 (B) – 1 (C) 0 (D) 2 (A) – 2 (B) – 1 (C) 0 (D) 2

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 22/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
9. The number of critical point(s) of f(x) = (x – 1) 9. f(x) = (x – 1) |x – 2| + (x – 2) |x – 1| के क्रान्तिक
|x – 2| + (x – 2) |x – 1| is :- बिन्दुओं की संख्या होगी :-
(A) 2 (B) 1 (A) 2 (B) 1
1 1
(C) more than 2 (D) − (C) 2 से अधिक (D) −
2 2
π π
10. If f(x) = (|x|)|sinx|, then f '  ( − ) = 10. यदि f(x) = (|x|)|sinx|, तब f '  ( − ) =
4 4
π 1/√2 √2 4 2 √2 π 1/√2 √ 2 4 2 √2
(A) ( ) ( log − ) (A) ( ) ( log − )
4 2 π π 4 2 π π

π 1/√2 √2 4 2 √2 π 1/√2 √ 2 4 2 √2
(B) ( ) ( log + ) (B) ( ) ( log + )
4 2 π π 4 2 π π

π 1/√2 √2 π 2 √2 π 1/√2 √ 2 π 2 √2
(C) ( ) ( log − ) (C) ( ) ( log − )
4 2 4 π 4 2 4 π

π 1/√2 √2 π 2 √2 π 1/√2 √ 2 π 2 √2
(D) ( ) ( log + ) (D) ( ) ( log + )
4 2 4 π 4 2 4 π

11. Let ƒ(x) = 3 αx + 3 βx, where α ≠ β and


11. माना ƒ(x) = 3 αx + 3 βx है, जहाँ α ≠ β तथा सभी x के
3ƒ'(x)log3e = 2ƒ(x) + ƒ''(x).(log3e)2 for all x. लिये 3ƒ'(x)log3e = 2ƒ(x) + ƒ''(x).(log3e)2  है,

Then the value of α + β is : तो  α + β का मान होगा


(A) 3 (B) 2 (C) – 3 (D) 6 (A) 3 (B) 2 (C) – 3 (D) 6
log(e/x2 ) 3 + 2 log x log(e/x2 ) 3 + 2 log x
12. If y = tan –1 ( ) + tan−1 ( ) , 12. यदि y = tan –1 ( ) + tan−1 ( ) , तो
log(ex2 ) 1 − 6 log x log(ex2 ) 1 − 6 log x
d2y d2y
 then 2  is  बराबर है
dx dx2
 
(A) 2 (B) 1 (C) 0 (D) – 1 (A) 2 (B) 1 (C) 0 (D) – 1
2 √1 + x 2 − 5 √1 − x 2 2 √1 + x 2 − 5 √1 − x 2
13. Derivative of cot –1 ( )
13. cot –1 ( )   का cos –1 √
1 − x4

5 √1 + x 2 + 2 √1 − x 2 5 √1 + x 2 + 2 √1 − x 2

with respect to cos –1 √


1 − x4 is equal to :- के सापेक्ष अवकलज है :-

(A) 1 (B) – 1 (C) 1/2 (D) – 1/2 (A) 1 (B) – 1 (C) 1/2 (D) – 1/2

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 23/28
14. If y = √
(x − sin x) + √(x − sin x) + √(x − sin x) +. . . . . ∞  ,
14. यदि y = √
(x − sin x) + √(x − sin x) + √(x − sin x) +. . . . . ∞

2 ∣ 2 ∣
∣ ∣
dx
then value of ∣
∣( dx ) − 2 π ∣
∣ is :   , हो तो  ∣


( )
dy x= π
− 2 π ∣


 का मान होगा

dy x= π
2 ∣ ∣ 2 ∣

(A) 1 (B) 2 (A) 1 (B) 2


(C) 3 (D) 4 (C) 3 (D) 4
15. In a triangle tanA + tan B + tan C = 6 and
15. एक त्रिभुज में tanA + tan B + tan C = 6 तथा

tan A tan B = 2, then the values of tan A, tan B and tan A tan B = 2, तब tan A, tan B तथा tan C के मान
tan C are :- हैं :-
(A) 1,2,3 (A) 1,2,3
(B) 3,2,1 (B) 3,2,1
(C) 1,2,0  (C) 1,2,0 
(D) None of these (D) इनमें से कोई नहीं
16. The value of
16.

का मान होगा -
is equal to
(A) 1 (A) 1
8 8
1 (B) 1
(B)
16 16
1 (C) 1
(C)
32 32
1 (D) 1
(D)
64 64

17. Let a = cos A + cos B – cos (A + B)


17. माना a = cos A + cos B – cos (A + B)

A A
b = 4 sin  sin B  cos ( A +2 B )  .
b = 4 sin  sin B  cos ( A +2 B )

2 2 2 2
Then a – b equal to :- तब a – b बराबर है :-
(A) 1 (B) 0 (C) – 1 (D) None (A) 1 (B) 0 (C) – 1 (D) कोई नहीं

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 24/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
18. If α , β , γ and δ are the solutions of the equation 18. π
यदि समीकरण tan ( θ+ )  =3 tan 3 θ , के मूल

4
π
tan( θ + )   =3 tan 3 θ , no two of which have
4 α , β , γ व δ है इनमें से किन्हीं दो के tan का मान समान
equal tangents, then the value of

नहीं है तो tan α + tan β + tan γ + tan δ =


tan α + tan β + tan γ + tan δ is :
(A) 1 (B) -1 (A) 1 (B) -1
(C) 2 (D) 0 (C) 2 (D) 0

19. If tan2 π  + tan2


( ) (

) + tan2 (

)  +........ 19. यदि tan2 π   + tan2
( ) (

)  + tan2(

)  +........
16 16 16 16 16 16

7π 7π
.........+ tan2 ( ) = λ & if xy + yx = λ , then the .........+ tan2 (
y x
) = λ तथा यदि x + y = λ , तो (x + y)
2
16 16

value of (x + y)2 must be का मान है

(A) 35 (B) 1225 (A) 35 (B) 1225


(C) 225 (D) 2 (C) 225 (D) 2

20. Let x = sin 1°, then the value of the expression


20. यदि x = sin 1°, जो व्यंजक

1 1 1 1
o o
+ + 
+ + 

cos 0 . cos 1 cos 1 . cos 2o


o o
cos 0 . cos 1 o
cos 1 . cos 2o
o

1 1 1 1
       o o
+. . . . +
       +. . . . +

cos 2 . cos 3 cos 44 . cos 45o


o o
cos 2 . cos 3 o
cos 44 . cos 45o
o

is equal to का मान है।

(A) x (A) x
1 1
(B) (B)
x x
√ 2 √ 2
(C) (C)
x x
x x
(D) (D)
√ 2 √ 2

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 25/28
SECTION-II : (Maximum Marks: 20) खण्ड-II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value.


प्रत्येक प्रश्न के लिए, सही पूर्णांक मान दर्ज करें (दशमलव संके तन में,
For each question, enter the correct integer value (In उत्तर को निकटतम पूर्णांक में लिखा जाना चाहिए। )

case of non-integer value, the answer should be प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
rounded off to the nearest Integer).
अनुसार किया जाएगा:

Answer to each question will be evaluated according to पूर्ण अंक           :    +4 यदि सही उत्तर दर्ज किया गया है।

the following marking scheme:


शून्य अंक         :    0 यदि कोई भी उत्तर दर्ज नहीं किया गया है।

Full Marks          :   +4 If correct answer is entered.


ऋणात्मक अंक  :    –1 यदि गलत उत्तर दर्ज किया गया है।
Zero Marks        :   0 If the question is unanswered.

Negative Marks  :   –1 If wrong answer is entered.


1. If the function f given by
1. यदि फलन f(x) = x3 – 3(a – 2)x2 + 3ax + 7 द्वारा दिया

f(x) = x3 – 3(a – 2)x2 + 3ax + 7, for some a ∈ R गया है किसी a ∈ R के लिये अन्तराल (0, 1] में वर्द्धमान

is increasing in (0, 1] and decreasing in [1, 5), तथा अन्तराल  [1, 5) में ह्यासमान हो, तो समीकरण 

then a root of the equation,   is :  का मूल होगा :

2. The sum of the maximum and minimum values of 2. फलन f(x) = |5x – 7| + [x2  + 2x] यहाँ [t] महत्तम
the function f(x) = |5x – 7| + [x2 + 2x] is the interval 5
पूर्णांक  ≤ t है, तो अंतराल [ , 2] में उच्चतम तथा निम्नतम
4
5
[ , 2], where [t] is the greatest integer ≤ t is : मानों का योगफल है।
4
3. If 'R' is the least value of 'a' such that the function 3. यदि 'a' का न्यूनतम मान, जिसके लिए फलन

f(x) = x2 + ax + 1 is increasing on [1, 2] and 'S' is f(x) = x2 + ax + 1, अंतराल [1, 2] पर वर्धमान है, 'R' है
the greatest value of 'a' such that the function
तथा 'a' का अधिकतम मान, जिसके लिए फलन

f(x) = x2 + ax + 1 is decreasing on [1, 2], then the f(x) = x2 + ax + 1 अंतराल [1, 2], पर ह्यसमान है,

value of |R – S| is : तो |R – S| का मान है।

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 26/28 Space for Rough Work / रफ कार्य के लिए जगह E + H / 06082023
4. If y1/4 + y –1/4 = 2x, and
4. यदि  y1/4 + y –1/4 = 2x, तथा

d2y dy d2y dy
( x2 − 1 ) + αx + β y = 0,  then | α – β | is ( x2 − 1 ) + αx + β y = 0,  हैं, तो | α – β |
dx2 dx dx2 dx

equal to _____. बराबर है _____।

6 6
3 4 3 4
5. If  y = ∑ kcos−1 { cos kx − sin kx},
5. यदि y = ∑ kcos−1 { cos kx − sin kx},

k=1
5 5 k=1
5 5

dy dy
then   at x = 0 is_____. ताे x = 0 पर    का मान है -
dx dx

cos2 1∘ − cos2 2∘ cos2 1∘ − cos2 2∘


6. If K =  , then 2K = ? 6. यदि K =   तब 2K = ?
2 sin 3∘ sin 1∘ 2 sin 3∘ sin 1∘

7. π π
If θ =  then value of 
7. यदि θ =  तब 

4n 4n
tan θ tan2 θ ________ tan(2n – 2) θ tan(2n – 1) θ
tan θ tan2 θ ________ tan(2n – 2) θ tan(2n – 1) θ

is :- का मान है :-

8. If tan  π( + θ ) + tan (


π
− θ ) = k sec 2 θ then k 8. यदि tan  π ( + θ ) + tan  π ( − θ ) = k sec 2 θ तब
4 4 4 4

is equal to :- k बराबर है :-

9. Let f(x) be a cubic polynomial with f(1) = – 10, 9. माना f(x) एक त्रिघातीय बहुपद है जिसके लिए

f( – 1) = 6, and has a local minima at x = 1, and f(1) = – 10, f( – 1) = 6 हैं, तथा ƒ का एक स्थानीय निम्नतम

f'(x) has a local minima at x = – 1. Then f(3) is बिंदु x = 1 है और f'(x) का एक स्थानीय निम्नतम बिंदु

equal to _____. x = – 1 है। तो ƒ(3) बराबर है_____।

10. Cosine of the angle of intersection of curves 


10. वक्र y = 3x – 1 log x तथा y = xx – 1 के प्रतिच्छेद कोण
y = 3x – 1 log x and y = xx – 1 is  की कोज्या (cosine) बराबर है

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

E + H / 06082023 Space for Rough Work / रफ कार्य के लिए जगह LTS - Page 27/28
SPACE FOR ROUGH WORK / रफ कार्य के लिए जगह

LEADER TEST SERIES / JOINT PACKAGE COURSE


0999DJM262103230003

LTS - Page 28/28 E + H / 06082023

You might also like