You are on page 1of 32

Test Pattern

(0999DJM210321015) )/999DJM21/321/15)
DISTANCE LEARNING PROGRAMME JEE(Main)
TEST # 03
(Academic Session : 2021 - 2022) 30-01-2022
JEE(MAIN) : LEADER TEST SERIES / JOINT PACKAGE COURSE
Time : 3 Hours 12th Undergoing/Pass Students Maximum Marks : 300
Test Type : Major Test
READ THE INSTRUCTIONS CAREFULLY/ Ïi;k bu funsZ'kksa dks /;ku ls i <+sa
Important Instructions : egRoiw . kZ funs Z ' k :

ds vuqns'kksa ds fcuk eqgjsa u rksM+s


1. Immediately fill in the form number on this page of the
1. ijh{kk iqfLrdk ds bl i`"B ij vko';d fooj.k uhys@dkys ckWy ikbaV
Test Booklet with Blue/Black Ball Point Pen. Use of pencil
is strictly prohibited.
isu ls rRdky HkjsaA isfUly dk iz;ksx fcYdqy oftZr gSaA
2. The candidates should not write their Form Number 2. ijh{kkFkhZ viuk QkeZ ua - (fu/kkZfjr txg ds vfrfjä) ijh{kk
anywhere else (except in the specified space) on the Test
iqfLrdk@mÙkj i= ij dgha vkSj u fy[ksaA
Booklet/Answer Sheet.
3. The Test Booklet consists of 90 questions. 3. bl ijh{kk iqfLrdk esa 90 iz'u gaSA
4. There are three parts in the question paper 1,2,3 4. bl ijh{kk iqfLrdk esa rhu Hkkx 1, 2, 3 gSa] ftlds izR;sd Hkkx esa HkkSfrd
consisting of Physics, Chemistry and Mathematics foKku] jlk;u foKku ,oa xf.kr ds 30 iz'u gSa vkSj izR;sd fo"k;
having 30 questions in each subject and each subject
esa 2 [k.M gSA
having Two sections.
(i) [k.M-I esa 20 cgqfodYih; iz'u gAS ftuds ds oy ,d fodYi

DO NOT BREAK THE SEALS WITHOUT BEING INSTRUCTED TO DO SO BY THE INVIGILATOR/fujh{kd


(i) Section-I contains 20 multiple choice questions
with only one correct option. lgh gSaA
Marking scheme : +4 for correct answer, 0 if not
attempted and –1 in all other cases.
va d ;ks tuk : +4 lgh mÙkj ds fy,] 0 iz;kl ugha djus ij
(ii) Section-II contains 10 Numerical Value Type rFkk –1 vU; lHkh voLFkkvksa esaA
questions. Attempt any 5 questions. First 5 (ii) [k.M -II es a 10 la [;kRed eku iz d kj ds iz 'u gS A fdUgh 5
attempted questions will be considered for marking. iz'uksa dk mÙkj nhft,A fd;s x;s iz'uksa esa ls dsoy izFke ik¡p
Marking scheme : +4 for correct answer and 0 in iz'uksa dks gh vad fn;s tk;saxsA
all other cases. vad ;ks tuk : +4 lgh mÙkj ds fy, rFkk 0 vU; lHkh voLFkkvksa esaA
5. Use Blue/Black Ball Point Pen only for writting 5. mÙkj i= ds i`"B–1 ,oa i`"B–2 ij okafNr fooj.k ,oa mÙkj vafdr djus
particulars/marking responses on Side–1 and Side–2 of the gsrq dsoy uhys@dkys ckWy ikbaV isu dk gh iz;ksx djsAa isfUly dk iz;ksx
Answer Sheet. Use of pencil is strictly prohibited. loZFkk oftZr gSA
6. No candidate is allowed to carry any textual material, 6. ijh{kkFkhZ }kjk ijh{kk d{k @ gkWy esa ifjp; i= ds vykok fdlh Hkh izdkj
printed or written, bits of papers, mobile phone any dh ikB~; lkexzh eqfær ;k gLrfyf[kr dkxt dh ifpZ;ksa] eksckby
electronic device etc, except the Identity Card inside the Qksu ;k fdlh Hkh izdkj ds bysDVªkfud midj.kksa ;k fdlh vU; izdkj
examination hall/room. dh lkexzh dks ys tkus ;k mi;ksx djus dh vuqefr ugha gSaA
7. Rough work is to be done on the space provided for this 7. jQ dk;Z ijh{kk iqfLrdk esa dsoy fu/kkZfjr txg ij gh dhft;sA
purpose in the Test Booklet only.
8. On completion of the test, the candidate must hand over 8. ijh{kk lekIr gksus ij] ijh{kkFkhZ d{k@gkWy NksM+u s ls iwoZ mÙkj i= d{k
the Answer Sheet to the invigilator on duty in the Room/ fujh{kd dks vo'; lkSai nsaA ijh{kkFkhZ vius lkFk bl ijh{kk iq fLrdk
Hall. However, the candidate are allowed to take away dks ys tk ldrs gSaA
this Test Booklet with them.
9. Do not fold or make any stray marks on the Answer Sheet. 9. mÙkj i= dks u eks M+ s a ,oa u gh ml ij vU; fu'kku yxk,s aA
10. Take g = 10 m/s2 unless otherwise stated. 10. g = 10 m/s2 iz;q Dr djs a ] tc rd fd vU; dks bZ eku ugha
fn;k x;k gks A
Name of the Candidate (in Capitals)
ijh{kkFkhZ dk uke (cM+s v{kjksa esa) :
Form Number : in figures
QkWeZ uEcj : vadksa esa
: in words
: 'kCnksa esa
Centre of Examination (in Capitals) :
ijh{kk dsUæ (cM+s v{kjksa esa) :
Candidate’s Signature : Invigilator’s Signature :
ijh{kkFkhZ ds gLrk{kj : fujh{kd ds gLrk{kj :
Your Target is to secure Good Rank in JEE(Main) 2022
Corporate Office : ALLEN CAREER INSTITUTE, “SANKALP”, CP-6, Indra Vihar, Kota (Rajasthan) INDIA-324005
+91-744-2757575 info@allen.ac.in www.allen.ac.in
LTS / Page 1/32
ALLEN
Topic : Full Syllabus
PART-1 : PHYSICS

SECTION-I : (Maximum Marks: 80) खण्ड –I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks           :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks         :    0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :  –1 If wrong option is selected.
1. 200 g water is heated from 40°C to 60°C. Ignoring 1. पानी के विस्तार को नगण्य मानते हुए, 200 g पानी को
the slight expansion of water, the change in its 40°C से 60°C तक गरम करने पर उसकी आंतरिक
internal energy is closed to (Given specific heat of ऊर्जा में अनुमानित परिवर्तन होगा (पानी की विशिष्ट
water = 4184 J/kg/K) :- ऊष्मा = 4184 J/kg/K लें) :-
(A) 4.2 kJ (B) 8.4 kJ (A) 4.2 kJ (B) 8.4 kJ
(C) 167.4 kJ (D) 16.7 kJ (C) 167.4 kJ (D) 16.7 kJ
2. A Carnot engine operating between temperatures 2. तापमान T1 एवं T2 के बीच कार्य कर रहे एक कार्नो इंजन
T1 and T2 has efficientcy 1 . When T2 is lowered की दक्षता 1  है। जब T2 को 62 K से घटा दिया जाता है,
6 6
1
by 62 K, its efficiency increases to . Then T1 तब इसकी दक्षता बढ़कर 1  हो जाती है। तब, क्रमशः T1
3 3
and T2 are, respectively :- एवं T2 है :-
(A) 330 K and 268 K (A) 330 K एवं 268 K
(B) 310 K and 248 K (B) 310 K एवं 248 K
(C) 372 K and 310 K (C) 372 K एवं 310 K
(D) 372 K and 330 K (D) 372 K एवं 330 K
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 2/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
3. A large cylindrical rod of length L is made by 3. दो प्रत्येक लम्बाई (L/2) की ताँबे एवं स्टील की एकसमान
joining two identical rods of copper and steel of छड़ों को जोड़कर लम्बाई L की एक लम्बी बेलनाकार छड़
length (L/2) each. The rods are completely insulated बनायी जाती है। छड़ों को वातावरण से पूर्ण रोधी बनाया
from the surroundings. If the free end of the copper जाता है। यदि ताँबे की छड़ का स्वतन्त्र सिरा 100°C पर
rod is maintained at 100°C and that of steel at 0°C और स्टील की छड़ का स्वतन्त्र सिरा 0°C पर संधारित
then the temperature of junction is (thermal किया जाता है, तब जोड़ का तापमान है (ताँबे की ऊष्मा
conductivity of copper is 9 times that of steel) :- चालकता स्टील की ऊष्मा चालकता की 9 गुनी है) :-
(A) 90°C (B) 10°C (A) 90°C (B) 10°C
(C) 67°C (D) 50°C (C) 67°C (D) 50°C
4. A band playing music at a frequency f is 4. f आवृत्ति की ध्वनि उत्पन्न करता हुआ एक संगीत बैण्ड
moving towards a wall at a speed νb. A motorist किसी दीवार की ओर νb  चाल से चल रहा है। एक मोटर
is following the band with a speed νm. If ν is the कार का चालक νm वेग से बैण्ड के पीछे-पीछे आ रहा है।
speed of sound the expression for the beat यदि ध्वनि का वेग ν है, तो मोटर कार के चालक द्वारा सुनी
frequency heard by the motorist is : गयी विस्पन्द आवृत्ति का व्यंजक है -
v  + vm v  + vm
(A) f (A) f
v  + vb v  + vb

v  + vm v  + vm
(B) f (B) f
v  − vb v  − vb

2vb (v  + vm ) 2vb (v  + vm )


(C) f (C) f
v2 − v2b v2 − v2b

2vm (v  + vb ) 2vm (v  + vb )


(D) f (D) f
v2 − v2m v2 − v2m

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 3/32
ALLEN
5. An open pipe is in resonance in its 2nd 5. f 1 आवृत्ति वाले स्वरित्र के साथ खुले पाईप का
harmonic with a tuning fork of frequency f1. द्वितीय संनादी अनुनादी की अवस्था में है। अब इसे
Now it is closed at one end. If the frequency  of एक सिरे पर बन्द कर दिया जाता है। यदि स्वरित्र की
the tuning fork is increased slowly from f1, then आवृत्ति को f 1 से धीरे -धीरे बढ़ाया जाता है, तब
again a resonance is obtained with a frequency आवृत्ति f 2 पर पुनः एक अनुनाद प्राप्त होता है। यदि
f2, If in this case the pipe vibrates in nth इस स्थिति में पाईप का n वाँ संनादी कम्पन करता
harmonic, then : है, तब :
3 3
(A) n = 3, f 2 = f1 (A) n = 3, f 2 = f1
4 4
5 5
(B) n = 3, f 2 = f1 (B) n = 3, f 2 = f1
4 4
5 5
(C) n = 5, f 2 = f1 (C) n = 5, f 2 = f1
4 4
3 3
(D) n = 5, f 2 = f1 (D) n = 5, f 2 = f1
4 4
6. A biconvex lens is formed with two thin plano- 6. चित्र में दर्शाये अनुसार दो पतले समतल-उत्तल लेंसों को
convex lenses as shown in the figure, मिलाकर एक उभयोत्तल लेंस बना है। पहले लेंस का
Refractive index of the first lens is 1.5 and that अपवर्तनांक 1.5  और दूसरे का 1.2 है। दोनों लेंसों के
of the second lens is 1.2. Both the curved गोलीय फलकों की वक्रता-त्रिज्या R = 14 cm है। इस
surfaces are of the same radius of curvature R = उभयोत्तल लेंस के लिये यदि बिम्ब दूरी 40 cm हो, तब
14 cm. For this biconvex lens, for an object प्रतिबिम्ब दूरी होगी
distance of 40 cm, the image distance will be :-

(A) –280.0 cm (B) 40.0 cm (A) –280.0 cm (B) 40.0 cm


(C) 21.5 cm (D) 13.3 cm (C) 21.5 cm (D) 13.3 cm
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 4/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
7. An astronomical telescope has an angular 7. खगोलिय दूर द र्शी की कोणीय आवर्धन का
magnification of magnitude 5 for distance परिमा ण दूर स् थ व स्तुओं के लिए 5 हैं।
objects. The separation between the objective अभिदृश् य क त था ने त्रि का के बीच दूरी 36 cm है
and the eye-piece is 36 cm and the final image और अ न्ति म प्र ति बि म् ब अनन्त पर प्राप्त होता है।
is formed at infinity. The focal length f0 of the अभिदृश् य क की फो क स दूरी f 0 तथा ने त्रि का की
objective and fe of the eye-piece are फोकस दूरी f e हैं-
(A) f0 = 45 cm and fe = – 9 cm (A) f0 = 45 cm तथा fe = – 9 cm
(B) f0 = 50 cm and fe = 10 cm (B) f0 = 50 cm तथा fe = 10 cm
(C) f0 = 7.2 cm and fe = 5 cm (C) f0 = 7.2 cm तथा fe = 5 cm
(D) f0 = 30 cm and fe = 6 cm (D) f0 = 30 cm तथा fe = 6 cm
8. Five identical plates each of area A are joined 8. पाँच एक जैसी समान क्षेत्रफल A की प्लेटों को
as shown in the figure. The distance between चित्र  के अनुसार जोड़ा गया है। प्लेटों के बीच की
the plates is d. The plates are connected to a दूरी d है। यदि इस संयोजन को V वोल्ट तक
potential difference of V volt. The charge on आवेशित किया जाये तो प्लेट 1 व 4 पर आवेश
plates 1 and 4 will be
होगा

ε 0 AV 2ε 0 AV ε 0 AV 2ε 0 AV
(A) . (A) .
d d d d
− ε 0 AV 2ε 0 AV − ε 0 AV 2ε 0 AV
(B) . (B) .
d d d d
ε 0 AV − 2ε 0 AV ε 0 AV − 2ε 0 AV
(C) . (C) .
d d d d
−ε 0 AV −2ε 0 AV −ε 0 AV −2ε 0 AV
(D) . (D) .
d d d d
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 5/32
ALLEN
9. Point charge q moves from point P to point S along 9. चित्रानुसार, बिन्दु आवेश q धनात्मक x-अक्ष की दिशा
the path PQRS (figure shown) in a uniform electric के समान्तर एकसमान विद्युत क्षेत्र में P से S की दिशा में
field E pointing coparallel to the positive direction
PQRS के अनुदिश गति करता है। P, Q, R  व S के
of the xaxis. The coordinates of the points P, Q, R
and S are (a, b, 0), (2a, 0, 0), (a, –b, 0) and (0, 0, 0) निर्देशांक क्रमशः (a, b, 0), (2a, 0, 0), (a, –b, 0) व
respectively. The work done by the field in the (0, 0, 0)  हैं। क्षेत्र  द्वारा उपरोक्त प्रक्रिया में किया गया
above process is given by the expression कार्य है

(A) qEa (B) –qEa (A) qEa (B) –qEa


– −−−−−−−−−
– −−−−−−−−−
(C) qEa√2 (D) qE√[(2a) 2 + b2 ] (C) qEa√2 (D) qE√[(2a) 2 + b2 ]

10. A square loop ABCD carrying a current i, is 10. कोई वर्गाकार पाश (लूप) ABCD जिससे धारा i प्रवाहित
placed near and coplanar with a long straight हो रही है, किसी लम्बे सीधे चालक XY जिससे धारा I
conductor XY carrying a current I, the net force प्रवाहित हो रही है के निकट एक ही तल में रखा है। इस पाश
on the loop will be :-
पर लगने वाला नेट बल होगा :-

2μ 0 Ii μ 0 Ii 2μ 0 Ii μ 0 Ii
(A) (B) (A) (B)
3π 2π 3π 2π
2μ 0 IiL μ 0 IiL 2μ 0 IiL μ 0 IiL
(C) (D) (C) (D)
3π 2π 3π 2π

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 6/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
11. Radius of current carrying coil is 'R'. Then ratio 11. एक धारावाही वृत्ताकार कु ण्डली की त्रिज्या R है। कु ण्डली
of magnetic fields at the centre of the coil to के के न्द्र पर उत्पन्न चुम्बकीय क्षेत्र तथा कु ण्डली के अक्ष पर
the axial point, which is R√–3  distance away के न्द्र से   R√–3 दूरी पर उत्पन्न चुम्बकीय क्षेत्र का अनुपात
from the centre of the coil :- होगा :-
(A) 1 : 1 (B) 1 : 2 (C) 1 : 4 (D) 8 : 1 (A) 1 : 1 (B) 1 : 2 (C) 1 : 4 (D) 8 : 1
12. The figure shows a LCR network connected to 12. प्रदर्शित चित्र  में एक LCR नेटवर्क को 300 V
300 V a.c. supply. The circuit elements are a.c. सप्लाई से जोड़ा गया हैं। परिपथ के अवयव
such that R = XL  = XC  = 10Ω. V1, V2  and R = X L  = X C   = 10 Ω है। तीन a.c. वोल्टमीटर
V3 are three a.c. voltmeters connected as shown V 1 , V 2  व V 3   को चित्रानुसार जोड़ा गया है। निम्न
in the figure. Which of the following represents में से कौनसा वोल्टमीटर के पाठयांको को सही
the correct set of readings of the voltmeters ?
प्रदर्शित करता है?

(A) V1 = 100 V, V2 = 100 V, V3 = 100 V (A) V1 = 100 V, V2 = 100 V, V3 = 100 V
(B) V1 = 150 V, V2 = 0 V, V3 = 150 V (B) V1 = 150 V, V2 = 0 V, V3 = 150 V
(C) V1 = 300 V, V2 = 100 V, V3 = 100 V (C) V1 = 300 V, V2 = 100 V, V3 = 100 V
(D) V1 = 300 V, V2 = 300 V, V3 = 300 V (D) V1 = 300 V, V2 = 300 V, V3 = 300 V
13. A wooden cube first floats inside water when a 13. एक लकड़ी के घन पर जब 200 ग्राम द्रव्यमान रखा जाता है
200 g mass is placed on it. When the mass is तो यह घन पानी के अन्दर तैरता है। जब यह द्रव्यमान हटा
removed the cube is 2 cm above water level. लिया जाता है तो घन पानी की सतह से दो सेमी उठ जाता
The side of cube is :– है। घन की भुजा होगी :–
(A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm (A) 5 cm (B) 10 cm (C) 15 cm (D) 20 cm

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 7/32
ALLEN
14. The moment of inertia of a solid cylinder about its 14. किसी ठोस बेलन का उसकी अक्ष के सापेक्ष जड़त्व
axis is given by (1/2)MR2. If this cylinder rolls आघूर्ण  (1/2)MR2 है। यदि यह बेलन बिना फिसले
without slipping, the ratio of its rotational kinetic लुढ़कता है तो इसकी घूर्णन गतिज ऊर्जा व स्थानान्तरणीय
energy to its translational kinetic energy is  गतिज ऊर्जा का अनुपात होगा
(A) 1 : 1 (B) 2 : 2 (C) 1 : 2 (D) 1 : 3. (A) 1 : 1 (B) 2 : 2 (C) 1 : 2 (D) 1 : 3.
15. The P.E. of a certain spring when stretched 15. किसी स्प्रिंग को जब उसके वास्तविक लम्बाई से
from natural length through a distance 0.3m is 0.3m  अधिक लम्बा कर दिया जाता है, तो स्प्रिंग की
10J. The amount of work in joule that must be स्थितिज ऊर्जा 10J होती है। यदि स्प्रिंग की लम्बाई 0.15m
done on this spring to stretch it through a और अधिक करना पड़े तो उसके लिये आवश्यक कार्य
additional distance 0.15m will be :- होगा :-
(A) 10 J (B) 20 J (C) 7.5 J (D) 12.5 J (A) 10 J (B) 20 J (C) 7.5 J (D) 12.5 J
16. A body of mass 10 kg slides along a rough 16. 10 किग्रा का एक पिण्ड खुरदरे क्षैतिज तल पर फिसल रहा
horizontal surface. The coefficient of friction is है। घर्षण गुणांक का मान 1/√–3 है। क्षैतिज के साथ 30° के

1/√3. Taking g = 10 m/s2, the least force which कोण पर लगने वाले न्यूनतम बल का मान क्या होगा,
acts at an angle of 30° to the horizontal is यदि g =10 मी/सै2 हो।
50 50
(A) 25 N   (B) 100 N   (C) 50 N  (D) –N (A) 25 N   (B) 100 N   (C) 50 N  (D) –N
√ 3 √ 3
17. A metal surface is illuminated by light of two 17. किसी धातु की एक सतह को अलग-अलग
different wavelength 248 nm and 310 nm. The तरं गदैर्ध्यो  248 nm तथा 310 nm से प्रदीप्त किया
minimum de-broglie wavelength of the गया है। इन तरं गदैर्ध्यो के संगत निकलने वाले प्रकाश
photoelectrons corresponding to these इलेक्ट्राॅनों  की न्यूनतम डी-ब्रोग्ली तरं गदैर्ध्य  क्रमशः
wavelengths are λ1 and λ2, respectively. If the λ 1 तथा λ 2 है। यदि अनुपात λ 1 : λ 2 = 1 : 2 तथा
ratio λ1 : λ2 = 1 : 2 and hc = 1240 eV-nm, the hc = 1240 eV nm है, तब धातु का कार्य फलन
work function of the metal is nearly लगभग है।
(A) 3.7 eV (B) 3.2 eV (A) 3.7 eV (B) 3.2 eV
(C) 2.8 eV (D) 2.5 eV (C) 2.8 eV (D) 2.5 eV
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 8/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
18. An electron of stationary hydrogen atom passes 18. किसी अचल हाइड्रोजन परमाणु का एक इलेक्ट्राॅन तृतीय
from the third excited state to the first excited उत्तेजित ऊर्जास्तर से प्रथम उत्तेजित अवस्था को गमन करता
state. The velocity that the atom acquired as a है। तो फोटाॅन उत्सर्जन के परिणाम स्वरूप परमाणु द्वारा प्राप्त
result of photon emission, will be :
वेग होगाः

(m is mass of the atom, R is Rydberg constant (जहाँ h प्लांक नियतांक, R रिडबर्ग नियतांक और m
and h is Planck's constant) परमाणु का द्रव्यमान है)
15 hR 8 hR 15 hR 8 hR
(A) (B) (A) (B)
16 m 9m 16 m 9m
24 hR 3 hR 24 hR 3 hR
(C) (D) (C) (D)
25 m 16 m 25 m 16 m
19. A freshly prepared sample of a radioisotope of 19. एक तुरंत तैयार किया हुआ रेडियो आइसोटोप प्रतिदर्श,
half-life 1386 s, has activity 103 distintegrations जिसकी अर्ध-आयु 1386 s है, की सक्रियता 10 3
per second. Given that ℓn 2 = 0.693, the fraction विघटन प्रति सेकं ड है। यदि ℓ n 2 = 0.693 है, तब
of the initial number of nuclei (expressed in प्रथम 40 s में विघटित नाभिकों व प्रारंभिक नाभिकों
nearest integer percentage) that will decay in the की संख्याओं का अनुपात (प्रतिशत निकटतम पूर्णांक
first 40 s after preparation of the sample is :- में) होगा।
(A) 1% (B) 2% (C) 3% (D) 4% (A) 1% (B) 2% (C) 3% (D) 4%
20. Consider the beta decay
20. β क्षय में

198
Au → 198Hg* + β + ν̄
198
Au → 198 Hg* + β +  ν̄

where 198Hg* represents a mercury nucleus in an जहाँ 198 Hg* मर्क री नाभिक है जिसकी उत्तेजित
excited state at energy 1.088 MeV above the ground अवस्था में ऊर्जा 1.088 MeV है तो उत्सर्जित
state. What can be the maximum kinetic energy of इलेक्ट्राॅन की अधिकतम गतिज ऊर्जा की गणना करो
the electron emitted? The atomic mass 198Au is 198
Au का परमाणु भार 197.968233 u तथा
197.968233 u and that of 198Hg is 197.966760 u. 198 Hg का 197.966760 u है।

(A) 0.286 MeV (B) 1.008 MeV (A) 0.286 MeV (B) 1.008 MeV
(C) 3.806 MeV (D) 0.00276 MeV (C) 3.806 MeV (D) 0.00276 MeV
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 9/32
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड –II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value प्रत्येक प्रश्न के लिए, सही संख्यात्मक मान दर्ज करें (दशमलव
Type questions.
संके तन में, दूसरे दशमलव स्थान पर काटे / छांटे गए; जैसे 6.25,
For each question, enter the correct numerical value (in 7.00, –0.33, –30, 30.27, –127.30, यदि उत्तर 11.36777 है
decimal notation, truncated/rounded off to the second ..... तब दोनों 11.36 और 11.37 सही होंगे)

decimal place; e.g. 6.25, 7.00, –0.33, –.30, 30.27, – प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
127.30, if answer is 11.36777..... then both 11.36 and अनुसार किया जाएगा:

11.37 will be correct)


पूर्ण अंक     :   +4 यदि के वल सही संख्यात्मक मान उत्तर के रूप में
Answer to each question will be evaluated according to दर्ज किया गया है।

the following marking scheme:


शून्य अंक   :   0 अन्य सभी मामलों में।
Full Marks    :    +4 If ONLY the correct numerical
value is entered as answer.

Zero Marks  :    0 In all other cases.


1. A gaseous mixture consists of 16 g of Helium and 1. गैसों के एक मिश्रण में 16 ग्राम हीलियम एवं 16 ग्राम
16 g of Oxygen. The ratio Cp/Cv of the mixture is :- ऑक्सीजन है। मिश्रण का Cp/Cv अनुपात है :-
2. A vibrating tuning fork of frequency n is placed 2. आवृति n वाला कम्पन्न करता हुआ स्वरित्र  एक लम्बी,
near the open end of a long cylindrical tube. The खुली हुई बेलनाकार नली के एक सिरे पर रखा है। नलिका
tube has a side opening and is also fitted with a एक ik'oZ की ओर से भी खुली है तथा इसमें एक
movable reflecting piston. As the piston is moved चलायमान परावर्तक पिस्टन लगा है। जब पिस्टन को एक
through 8.75 cm, the intensity of sound changes 8.75 cm खिसकाया जाता है तब ध्वनि की तीव्रता
from a maximum to minimum. If the speed of अधिकतम से न्यूनतम परिवर्तित होती है। यदि ध्वनि की
sound is 350 metre per second, then n(In Hertz) is :- चाल 350 m/s है तब n (हर्टज में) है :-

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 10/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
3. In a double slit experiment with monochromatic light, 3. द्विस्लिट प्रयोग में एक वर्णीय प्रकाश उपयोग में लेने पर स्लिट
fringes are obtained on a screen placed at some distance से कु छ  दूरी पर स्थित पर्दे पर व्यतिकरण फ्रिन्जें प्राप्त होती है।
from slits. If the screen is moved by 5 × 10–2m towards यदि पर्दे को स्लिट की ओर 5 × 10–2m दूरी विस्थापित किया
the slits, the change in fringe width is 2 × 10–5m. If the जाता है तो फ्रिज चौड़ाई में परिवर्तन 2 × 10–5m प्राप्त होता है।
distance between slits is 10-3 m, calculate the यदि स्लिटों के मध्य की दूरी 10-3 m है तो प्रयुक्त प्रकाश की
wavelength of light used. (in Å) तरंगदैर्ध्य ज्ञात कीजिए। (in Å)
4. In an a.c. circuit V and I are given by
4. एक प्रत्यावर्ती धारा परिपथ में V और I निम्नलिखित
V = 100 sin (100 t) volts
समीकरण से दिए जाते है,

V = 100 sin (100 t) वोल्ट,

I = 100 sin (100t + π/3) mA


I = 100 sin (100t + π/3) mA

The power dissipated in the circuit is (watt) तो परिपथ में शक्ति क्षय होगी (watt)
5. A capacitor of capacitance C = 0.015 F is connected 5. C = 0.015 F धारिता का एक संधारित्र समान्तर चालक
to parallel conducting rail and a conducting rod of पटरी से जुड़ा है तथा m = 100 g द्रव्यमान और  ℓ = 1m
mass m = 100 g and length ℓ = 1m start to fall under लम्बाई की चालक छड़ उर्ध्वाधर तल में गुरूत्वीय क्षेत्र में
gravity in vertical plane. A uniform magnetic field of गिरना शुरू करती है। चित्रानुसार छड़ के लम्बवत् अन्तरिक्ष
2T exist in space directed perpendicular to rod as में एक समान चुम्बकीय क्षेत्र 2T विद्यमान है। छड़ का त्वरण
shown in figure. Find acceleration of rod (m/s2).
ज्ञात करो (m/s2) :-

6. A ball is thrown from the top of a tower with 6. एक गेंद को किसी मीनार के शीर्ष से 10m/s
an initial velocity of 10m/s at an angle 37° प्रारम्भिक वेग के साथ क्षैतिज से 37° कोण ऊपर
above the horizontal, hits the ground at a फैं का जाता है। यह मीनार के पाद से 16m की दूरी
distance 16m from the base of tower. Calculate पर धरातल पर टकराती है। मीनार की ऊँ चाई ज्ञात
height of tower. [g = 10 m/s2] कीजिये।  [g = 10 m/s 2 ]

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 11/32
ALLEN
7. A bomb-shell is thrown obliquely in air. It 7. बम का एक गोला वायु में तिरछा  फें का जाता है। अपनी
explodes during its flight and fragments fly off बीच उड़ान में यह अनेक टुकड़ों में फट जाता है और ये
in various directions. The air resistance is टुकडे विभिन्न दिशाओं में बिखर जाते हैं। वायु प्रतिरोध
negligible. Then the centre of mass of the नगण्य है। तब बम-गोले के टुकडों का द्रव्यमान के न्द्र गति
bomb-shell fragments will move :- करेगा :-
8. If the radius of the earth be increased by a 8. यदि पृथ्वी की त्रिज्या को 5 के गुणन से बढ़ा लिया जाए तो
factor of 5, by what factor its density be बताइए घनत्व को किस गुणन से बदला जाए कि गुरूत्वीय
changed to keep the value of g the same ? त्वरण का मान समान रहे?
9. A beam of light has two wavelengths 4972 Å 9. 3.6 × 10 – 3 Wm – 2 तीव्रता का प्रकाश पुंज
and 6216 Å with a total intensity of 3.6 × 10–3 अपनी कु ल तीव्रता को समान भागों में दो
Wm–2 equally distributed among the two तरं गदैध्यों 4972 Å व 6216 Å में वितरित करता
wavelengths. The beam falls normally on an area है। यह पुंज 1 cm 2 क्षेत्रफल व 2.3 eV
of 1 cm2 of a clean metallic surface of work कार्यफलन वाली धात्विक सतह पर अभिलम्ब
function 2.3 eV. Assume that there is no loss of गिरता है। यदि परावर्तन में ऊर्जा हानि नगण्य मानें
light by reflection and that each capable photon व प्रत्येक फोटोन एक इलैक्ट्राॅन उत्सर्जित करता
ejects one electron.The number of photoelectrons हो, तो 2s में धात्विक पृष्ठ से उत्सर्जित फोटो
emitted in 2s is approx 10z where z is equal to : इलेक्ट्राॅन लगभग 10 z  होने पर z का मान होगा।
10. A radioactive nucleus A with a half life  2 days, 10. एक रेडियोएक्टिव नाभिक A जिसकी अर्द्धआयु 4 दिन है, का
decays into a nucleus B. At t = 0, there is no क्षय एक नाभिक B में होता है। समय t = 0 पर कोई भी
nucleus B. At sometime t, the ratio of the number नाभिक B का उपस्थित नहीं है। एक समय t पर नाभिकों B
of B to that of A is 0.3. Then, t is given by x days, तथा A की संख्या का अनुपात 0.3 है तो t को x दिन से दिया
then x will be :(given log 1.3 = 0.114) जाता है जहां x का मान होगा। (दिया है log 1.3 = 0.114)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 12/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
Topic : Full Syllabus
PART-2 : CHEMISTRY

SECTION-I : (Maximum Marks: 80) खण्ड –I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks           :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks         :    0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :  –1 If wrong option is selected.
1. Half life of a first order reaction : 
1. प्रथम कोटि अभिक्रिया : A(aq.) → 2B(aq.) की अर्द्ध
A(aq.) → 2B(aq.) is 40 min at 27°C and 20 min आयु 27°C पर 40 min तथा 37°C पर 20 min है, तो
at 37°C. The activation energy of reaction is अभिक्रिया की सक्रियण ऊर्जा है 

(ln2 = 0.7, R = 2.0 cal mol–1K–1) (ln2 = 0.7, R = 2.0 cal mol–1K–1)
(A) 19530 cal/ mol (A) 19530 cal/ mol
(B) 13020 cal/ mol (B) 13020 cal/ mol
(C) 26040 cal/ mol (C) 26040 cal/ mol
(D) 6510 cal/ mol (D) 6510 cal/ mol
2. In the oxidation of C2O42– ion by MnO4– ion in 2. अम्लीय माध्यम में MnO4– आयन द्वारा C2O42– आयन के
acidic medium, moles of H+ ions needed per ऑक्सीकरण में प्रति मोल C2O42– आयन के लिये
mole of C2O42– ion is :-  आवश्यक H+ आयनों के मोल है :-
(A) 16 (B) 8 (A) 16 (B) 8
(C) 3.2 (D) 6.4 (C) 3.2 (D) 6.4
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 13/32
ALLEN
3. Given the following bond enthalpies :
3. निम्न बंध ऐन्थेल्पियाँ दी गयी है :

BE(N ≡ N) = 942 kJ/mol ;


BE(N ≡ N) = 942 kJ/mol ;

BE(H – H) = 436 kJ/mol ;


BE(H – H) = 436 kJ/mol ;

BE(N – N) = 163 kJ/mol ;


BE(N – N) = 163 kJ/mol ;

BE(N – H) = 390 kJ/mol


BE(N – H) = 390 kJ/mol

Determine enthalpy change for the following निम्न बहुलकीकरण अभिक्रिया में एक मोल N2(g)
polymerisation reaction per mole of N2(g) प्रयोग में लिये जाने पर होने वाले ऐन्थेल्पी परिवर्तन की
consumed -
गणना कीजिये :-

nN2(g) + nH2(g) → –(– NH – NH –)n– nN2(g) + nH2(g) → –(– NH – NH –)n–

(A) 272 kJ (A) 272 kJ


(B) 136 kJ (B) 136 kJ

(C) 435 kJ (C) 435 kJ


(D) 200 kJ (D) 200 kJ
4. Which of the following graph will not be 4. एक आदर्श गैस के निश्चित द्रव्यमान के लिये निम्न में
straight line for fixed mass of an ideal gas? कौनसा आरेख सीधी रेखा में नहीं होगा ?
(A) pv v/s p (at constant temperature) (A) pv v/s p (नियत ताप पर)
(B) log p vs log v (at constant temperature) (B) log p vs log v (नियत ताप पर)
1 1
(C) P vs  (at constant temperature) (C) P vs  (नियत ताप पर)
V V
(D) Density v/s T (at constant pressure) (D) घनत्व v/s T (नियत ताप पर)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 14/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
5. pH of a mixture of 1 M HA (pK a = 4.2) 5. यदि 1 M HA (pKa = 4.2) एवं 1 M NaA वाले मिश्रण
and  1 M NaA is 4.5. In 300 ml of buffer का pH 4.5 है तब 300 ml बफर में HA का आयतन है
volume of HA is [log 2 = 0.3] :- [log 2 = 0.3]
(A) 200 ml (B) 150 ml (A) 200 ml (B) 150 ml
(C) 100 ml (D) 600 ml (C) 100 ml (D) 600 ml
6. What is the charge on tin if 7.375 g of metallic tin 6. टिन आयन युक्त विलयन में   24125 कू लाम आवेश
प्रवाहित करने पर 7.375 g धात्विक टिन निक्षेपित होता है।
is deposited by passage of  24125 C through a
विलयन में उपस्थित टिन आयन पर आवेश कितना होगा?
solution containing the ion ? [At. wt. of Sn = 118] [Sn का परमाणु भार = 118]
(A) +1 (B) +3 (A) +1 (B) +3
(C) +2 (D) +4 (C) +2 (D) +4
7. Find the last product [D] is reaction sequence
7. निम्न अभिक्रिया अनुक्रम में अन्तिम उत्पाद [D] है :-

 
 
(A) (A)
(B) C6H5–CH=CH–CH2–CH3 (B) C6H5–CH=CH–CH2–CH3

(C) (C)

(D) (D)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 15/32
ALLEN
8. The end products of the following sequence of 8. अभिक्रियाओं के निम्नलिखित अनुक्रम का अन्तिम उत्पाद
reaction are है

(A) yellow precipitate of CHI3,  (A) CHI3 का पीला अवक्षेप, 

(B) yellow precipitate of CHI3,  (B) CHI3 का पीला अवक्षेप, 

(C) yellow precipitate of CHI3,  (C) CHI3 का पीला अवक्षेप, 

(D) yellow precipitate of CHI3,  (D) CHI3 का पीला अवक्षेप, 

9. Which of the following cations is most stable :- 9. निम्न में से कौन सा धनायन सबसे अधिक स्थाई है।

(A) (A)

(B) (B)

(C) (C)

(D)
(D)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 16/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
10. Which of the following organic compounds 10. निम्नलिखित में से कौन सा कार्बनिक यौगिक आयोडोफार्म
answers to both iodoform test and Fehling's test? परीक्षण और फे हलिंग परीक्षण दोनो देता है?
(A) Ethanol (B) Methanal (A) एथेनाॅल (B) मेथेनल
(C) Ethanal (D) Propanone (C) एथेनल (D) प्रोपनाॅन

11.   is: 11.   है :

(A) (2R, 3R) -3-chloro 2-pentanol (A) (2R, 3R) -3-chloro 2-pentanol
(B) (2R, 3S) -3-chloro 2-pentanol (B) (2R, 3S) -3-chloro 2-pentanol
(C) (2S, 3R) -3-chloro 2-pentanol (C) (2S, 3R) -3-chloro 2-pentanol
(D) (2S, 3S) -3-chloro 2-pentanol (D) (2S, 3S) -3-chloro 2-pentanol
12. The compound which is most reactive towards 12. नाभिक स्नेही प्रतिस्थापन क्रिया हेतु सबसे अधिक
nucleophilic substitution reaction is क्रियाशील यौगिक है।
(A) CH3COCI (A) CH3COCI
(B) CH3CONH2 (B) CH3CONH2
(C) (CH3CO)2O (C) (CH3CO)2O
(D) CH3COOCH3 (D) CH3COOCH3
13. Which one of the following bases is not present 13. निम्न में से कौन सा क्षार DNA में उपस्थित नहीं
in DNA? है।
(A) Cytosine (B) Thymine (A) Cytosine (B) Thymine
(C) Quinoline (D) Adenine (C) Quinoline (D) Adenine
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 17/32
ALLEN
14. The option with only amphoteric oxides is  :- 14. किसमें सभी ऑक्साइड उभयधर्मी हैं ?
(A) Cr2O3, NO, SnO, PbO (A) Cr2O3, NO, SnO, PbO
(B) NO, B2O3, PbO, SnO2 (B) NO, B2O3, PbO, SnO2
(C) Cr2O3, BaO, SnO, SnO2 (C) Cr2O3, BaO, SnO, SnO2
(D) ZnO, Aℓ2O3, PbO, PbO2 (D) ZnO, Aℓ2O3, PbO, PbO2
15. Correct order of solubility is :- 15. विलेयता का सही क्रम है :-
(A) BeSO4 > MgSO4 > CaSO4 > Sr SO4 > BaSO4 (A) BeSO4 > MgSO4 > CaSO4 > Sr SO4 > BaSO4
(B) Be(OH)2 < Mg(OH)2 < Ca(OH)2 < Sr(OH)2 < (B) Be(OH)2 < Mg(OH)2 < Ca(OH)2 < Sr(OH)2 <
Ba(OH)2 Ba(OH)2
(C) Li2CO3 < Na2CO3 < K2CO3 < Rb2CO3 < Cs2CO3 (C) Li2CO3 < Na2CO3 < K2CO3 < Rb2CO3 < Cs2CO3
(D) All of them (D) उपरोक्त सभी
16. Select wrong statement about diborane (B2H6)? 16. B2H6 (डाईबोरेन) के लिये निम्न में से कौनसा कथन गलत है -
(A) 2C–2e bond formed by terminal hydrogen. (A) 2C–2e बंध का निर्माण अन्तस्थ हाइड्रोजन द्वारा होता है।
(B) 3C–2e bond formed by bridge hydrogen. (B) 3C–2e बंध का निर्माण सेतु हाइड्रोजन द्वारा होता है।
(C) 3C–2e bond, called Banana bond. (C) 3C–2e बंध को  बनाना बंध (कदली आबंध) कहा जाता है।
(D) All hydrogen are present in same plan. (D) सभी हाइड्रोजन समान तल में उपस्थित होते हैं।
17. Temporary hardness of water due to presence of :- 17. जल की अस्थायी कठोरता निम्न के कारण होती है :-
(A) CaCO3 (A) CaCO3
(B) MgCO­3 (B) MgCO­3
(C) Ca(HCO3)2 (C) Ca(HCO3)2
(D) CaSO4 (D) CaSO4
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 18/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
18. Match List-I with List-II and select the correct 18. सारणी-I व सारणी-II को सुमेलित करे व नीचे दिए गए
order using codes given below in the lists :- कोड में से सही उत्तर चुनें :-

  List-I   List-II   सारणी-I   सारणी-II


(a) Cyanide process (P) Ultrapure Ge (a) सायनाइड प्रक्रम (P) अतिशुद्ध Ge
(b) Floatation process (Q) Pine oil (b) प्लवन प्रक्रम (Q) चीड़ का तेल
Electrolytic वैद्युत अपघट्यी
(c) (R) Extraction of Al (c) (R) Al का निष्कर्षण
reduction अपचयन
(d) Zone refining (S) extraction of Au (d) क्षेत्र परिशोधन (S) Au का निष्कर्षण
(A) (a)-(R); (b)-(P); (c)-(S); (d)-(Q) (A) (a)-(R); (b)-(P); (c)-(S); (d)-(Q)
(B) (a)-(S); (b)-(Q); (c)-(R); (d)-(P) (B) (a)-(S); (b)-(Q); (c)-(R); (d)-(P)
(C) (a)-(R); (b)-(Q); (c)-(S); (d)-(P) (C) (a)-(R); (b)-(Q); (c)-(S); (d)-(P)
(D) (a)-(S); (b)-(P); (c)-(R); (d)-(Q) (D) (a)-(S); (b)-(P); (c)-(R); (d)-(Q)
19. In ICl2+ , ICl2–  and ICl4– sum of bond pair and 19. ICl2+ , ICl2–  तथा ICl4– में प्रत्येक आयोडीन परमाणु पर
lone pair on each iodine atom are respectively - बंध युग्म तथा एकांकी इलेक्ट्रान युग्म का योग क्रमशः है-
(A) 2, 2 and 4 (B) 2, 3 and 2 (A) 2, 2 तथा 4 (B) 2, 3 तथा 2
(C) 4, 5 and 4 (D) 4, 5 and 6 (C) 4, 5 तथा 4 (D) 4, 5 तथा 6
high temp 393K
393K
20. CaSO4.2H2O  −−−→ x −−−−−→ y
20. CaSO4.2H2O  −−−→ x  y

x, y are respectively : x, y क्रमशः है :


(A) Plaster of paris, dead burnt plaster (A) प्लास्टर ऑफ पेरिस, मृत जला हुआ प्लास्टर
(B) Plaster of paris, CaO (B) प्लास्टर ऑफ पेरिस, CaO
(C) Plaster of paris, mixture of gases (C) प्लास्टर ऑफ पेरिस, गैसों का मिश्रण
(D) dead burnt plaster, plaster of paris (D) मृत प्लास्टर, प्लास्टर ऑफ पेरिस
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 19/32
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड –II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value प्रत्येक प्रश्न के लिए, सही संख्यात्मक मान दर्ज करें (दशमलव
Type questions.
संके तन में, दूसरे दशमलव स्थान पर काटे / छांटे गए; जैसे 6.25,
For each question, enter the correct numerical value (in 7.00, –0.33, –30, 30.27, –127.30, यदि उत्तर 11.36777 है
decimal notation, truncated/rounded off to the second ..... तब दोनों 11.36 और 11.37 सही होंगे)

decimal place; e.g. 6.25, 7.00, –0.33, –.30, 30.27, – प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
127.30, if answer is 11.36777..... then both 11.36 and अनुसार किया जाएगा:

11.37 will be correct)


पूर्ण अंक     :   +4 यदि के वल सही संख्यात्मक मान उत्तर के रूप में
Answer to each question will be evaluated according to दर्ज किया गया है।

the following marking scheme:


शून्य अंक   :   0 अन्य सभी मामलों में।
Full Marks    :    +4 If ONLY the correct numerical
value is entered as answer.

Zero Marks  :    0 In all other cases.

1. The vapour density of a sample of N2O4(g) is 1. 4.8 atm तथा 127°C पर N2O4(g) के एक नमूने का
115 115
 at 4.8 atm at 127°C. The value of Kp
वाष्प घनत्व   है। निम्न अभिक्रिया में 127°C पर Kp
3 3

(in atm) of the reaction : 


का मान (atm में) है :

N2O4(g)  2NO2(g), at 127°C, is - N2O4(g)   2NO2(g)

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 20/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
2. Number of next nearest neighbour in fcc lattice 2. fcc जालक में अगले निकटतम पडौसी की संख्या
is :- है :-

3. The Ksp of AgCl is 10–10 M2. Find E (volt) for 3. AgCl का Ksp, 10–10 M2 है। Ag(aq)+/Ag(s) के लिए E

(वोल्ट) बताइये यदि Ag इलेक्ट्रोड को 25°C पर 1M


Ag(aq)+/Ag(s) if Ag electrode is immersed in 1M
KCl में डुबाया गया है।

+
KCl at 25°C.  [Given:E°Ag(aq) /Ag(s) = 0.80 V,
[दिया है :  E°Ag(aq)+/Ag(s) = 0.80 V,
2.303RT 2.303RT
= 0.059] 0.059]
F F
=

4. A solution of isopropyl alcohol and propyl 4. आइसोप्रोपिल ऐल्कोहाॅल तथा प्रोपिल ऐल्कोहाॅल के एक

alcohol has a vapour pressure 200 mm of Hg if


विलयन का वाष्प दाब 200 mm Hg है, यदि इसमें 25%
it has 25% mole of isopropyl alcohol. Another
आइसोप्रोपिल उपस्थित है। समान घटकों के अन्य विलयन
solution of same components containing  25%
जिसमें 25% प्रोपिल अम्ल उपस्थित है, का वाष्प
mole propyl alcohol has vapour pressure 300

mm of Hg. Then vapor pressure of isopropyl दाब 300 mm Hg है तो आइसोप्रोपिल ऐल्कोहाॅल का,

alcohol in mm of Hg is : mm Hg में वाष्पदाब क्या है?

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 21/32
ALLEN
5. In how many of the following reactions 5. निम्न में से कितनी अभिक्रिया में एल्डिहाइड उत्पाद के रूप
aldehyde is formed as a product ?
में मिलेगा।

(viii) 
(viii) 

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 22/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
6. How many cyclic structure are possible for C4H6 - 6. C4H6 में संभव चक्रीय संरचना कितनी होगी।

7. How many secondary hydrogens are present in 7. एल्काईन जिसका नाम 3-एथिल-4-ऑक्टाइन है में कितने
the alkyne named 3 - ethyl - 4 - octyne? द्वितीयक हाइड्रोजन उपस्थित है ?

8. Number of ions in the Aqueous solution of 8. K 4 [FeF 6 ] के जलीय विलयन में आयनों की संख्या =
K4[FeF6] = x
Number of ions in the Aqueous
x  [Ni(CO) 4 ]  के जलीय विलयन में आयनों की
solution of [Ni(CO)4] = y
Number of ions in the
संख्या  = y  Fe 4 [Fe(CN) 6 ] 3 के जलीय विलयन में
Aqueous solution of Fe4 [Fe(CN)6]3 = z        

find (x+2y+z) = ? आयनों की संख्या = z ताे (x+2y+z) = ज्ञात करो

9. Number of Cr-O bonds in chromate ion = x


9. क्रोमेट आयन में Cr-O बंधो की संख्या = x

Number of Cr-O bonds in dichromate ion = y


डाईक्रोमेट आयन में Cr-O बंधो की संख्या = y

Determine, (x + y). (x + y) का मान ज्ञात करें।

10. Ratio of σ & π bond in P4O10 is :- 10. P4O10 में σ व π बन्ध की संख्या का अनुपात है :-

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 23/32
ALLEN
Topic : Full Syllabus
PART-3 : MATHEMATICS

SECTION-I : (Maximum Marks: 80) खण्ड –I : (अधिकतम अंक: 80)


This section contains 20 questions. Each question has इस खंड में 20 प्रश्न हैं। प्रत्येक प्रश्न में सही उत्तर के लिए 4 विकल्प हैं।
4 options for correct answer. Multiple-Choice बहुविकल्पीय प्रश्न (MCQs) के वल एक विकल्प सही है। प्रत्येक प्रश्न
Questions (MCQs) Only one option is correct. For के लिए, अंक निम्नानुसार दिए जाएंगे:

each question, marks will be awarded as follows:


पूर्ण अंक           :    +4 यदि सही उत्तर चुना गया है।

Full Marks           :   +4 If correct answer is selected.


शून्य अंक         :    0 यदि कोई भी विकल्प नहीं चुना गया है।

Zero Marks         :    0 If none of the option is selected.


ऋणात्मक अंक  :    –1 यदि गलत विकल्प चुना गया है।
Negative Marks  :  –1 If wrong option is selected.
1. If a ∈ z, and the equation (x – a) (x – 10) + 1 = 0 1. यदि a ∈ z तथा समीकरण (x – a) (x – 10) + 1 = 0 के
has integral roots, then the values of a are :- पूर्णाकीय हल हो तो a के मान होंगे :-
(A) 8, 10 (A) 8, 10
(B) 10, 12 (B) 10, 12
(C) 12, 8 (C) 12, 8
(D) None of these (D) इनमें से कोई नहीं
2. If a, b, c are in A.P. and x is variable then 2. यदि a, b, c समान्तर श्रेणी में हो तथा x चर हो तो
∣ x+1 x+5 x+a ∣ ∣ x+1 x+5 x+a ∣

x+2 x+7 x + b ∣ = 0 is :-

x+2 x+7 x + b ∣ = 0 है :-
∣ ∣ ∣ ∣
∣x+3 x+9 x+c ∣ ∣x+3 x+9 x+c ∣

(A) An equation whose all roots are real (A) एक समीकरण जिसके सभी मूल वास्तविक है।
(B) An identity in x (B) x में एक सर्वसमिका हैं
(C) An equation whose only one root is real (C) एक समीकरण जिसका एक ही वास्तविक मूल हैं।
(D) None of these (D) इनमें से कोई नहीं
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 24/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
λ λ−1 λ λ−1
3. If Aλ = [ ]  ; λ ∈ N then |A1| + |A2| + 3. यदि Aλ = [ ]  ; λ ∈ N तो |A1| + |A2| +
λ−1 λ λ−1 λ
---- |A300| is equal to :- ---- |A300| का मान है :-
(A) (299)2 (A) (299)2
(B) (300)2 (B) (300)2
(C) (301)2 (C) (301)2
(D) None of these (D) इनमें से कोई नहीं
4. The number of 5 digit numbers which are 4. 3 से विभाजित 5 अंको की कु ल कितनी संख्याऐ बनाई जा
divisible by 3, using digits 1, 2, 3, 4, 5, 6, 7, 8 सकती है, यदि अंक 1, 2, 3, 4, 5, 6, 7, 8 तथा 9 प्रयोग
and 9 when repetition of digit is allowed is :- में लिये जाऐ, अंको की पुनरावृति मान्य है:-
(A) 39 (B) 4.38 (C) 5.38 (D) 7.38 (A) 39 (B) 4.38 (C) 5.38 (D) 7.38
5. A key bunch contains 100 keys exactly one of 5. 100 चाबीयों के एक छल्लों में से एक चाबी किसी दरवाजें
which open the door. A man tries to open the को खोल देती है, यदि एक व्यक्ति उन चाबियों  में से एक -
door by choosing a key random discarding the एक करके उस दरवाजें को खोलने का प्रयास करता है, तो
wrong key after each trial. The probability that 25 वें प्रयास में दरवाजें के खुलने की प्रायिकता होगी, यदि
door open in 25th trial is – वह प्रत्येक प्रयास के बाद गलत चाबी को हटा देता हो-
1 1 1 1
(A) (B) (A) (B)
100 76 100 76
1 1 1 1
(C) (D) (C) (D)
25 24 25 24
3 3
6. If  z = , then locus of z is :- 6. यदि z =  हो तो z का बिन्दुपथ होगा :-
2 + cos θ + i sin θ 2 + cos θ + i sin θ
(A) a straight line (A) सरल रेखा 
(B) a circle having centre on x-axis (B) एक वृत्त जिसका के न्द्र x-अक्ष पर स्थित हो 
(C) a circle having centre on y-axis (C) एक वृत्त जिसका के न्द्र y-अक्ष पर स्थित हो 
(D) a parabola (D) परवलय

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 25/32
ALLEN
7. The value of x→0([ 100x
lim
sin x
] + [
99 sin x
x
 is :-

]) 7. lim([
100x
] + [
99 sin x
 का मान है :-

])
x→0 sin x x
(where [.] is greatest integer function) (जहाँ [.] महत्तम पूर्णांक फलन है)
(A) 198 (B) 500 (C) 400 (D) 300 (A) 198 (B) 500 (C) 400 (D) 300
8. The function of defined by 
8. फलन f(x) = x3 – 6x2 – 36x + 7 के द्वारा परिभाषित है
f(x) = x3 – 6x2 – 36x + 7 is increasing if :- तो f(x) वर्द्धमान है यदि :-
(A) x > 2 & also x > 6 (A) x > 2 & also x > 6
(B) x > 2 & also x < 6 (B) x > 2 & also x < 6
(C) x < –2 & also x < 6 (C) x < –2 & also x < 6
(D) x < –2 & also x > 6 (D) x < –2 & also x > 6
9. Points of inflexion of the curve y = x4 – 6x3 + 9. वक्र y = x4 – 6x3 + 12x2 + 5x + 7 के नति परिवर्तन
12x2 + 5x + 7 are बिन्दु हैं
(A) (1, 19) ; (1, 12) (B) (1, 19) ; (2, 33) (A) (1, 19) ; (1, 12) (B) (1, 19) ; (2, 33)
(C) (1, 2); (2, 1) (D) (1, 7), (2, 6) (C) (1, 2); (2, 1) (D) (1, 7), (2, 6)
10. The function f (x) = cos x − 2px is monotonically 10. फलन f (x) = cos x − 2px एकदिष्ट हृासमान है -
decreasing for
1 1 1 1
(A) p< (B) p> (A) p< (B) p>
2 2 2 2
(C) p < 2 (D) p > 2 (C) p < 2 (D) p > 2
11. Area enclosed between the curves |y| = 1 – x2 11. वक्र |y| = 1 – x2 तथा x2 + y2 = 1 द्वारा परिबद्ध क्षैत्रफल
and x2 + y2 = 1 is है-
3π − 8 π−8 3π − 8 π−8
(A)  sq. units (B)  sq. units (A)  वर्ग इकाई (B)  वर्ग इकाई
3 3 3 3
2π − 8 2π − 8
(C)  sq. units (D) None of these (C)  वर्ग इकाई (D) इनमें से कोई नहीं
3 3

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 26/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
cos x − sin x cos x − sin x
12. If ∫ ( ) dx
12. यदि  ∫ ( ) dx

7 − 9 sin 2x 7 − 9 sin 2x
1 ∣ 4 + 3(sin x + cos x) ∣ 1 ∣ 4 + 3(sin x + cos x) ∣
=  ℓn ∣ ∣+ c
=  ℓn ∣ ∣+ c

k ∣ 4 − 3(sin x + cos x) ∣ k ∣ 4 − 3(sin x + cos x) ∣

then k is equal to तो k बराबर है।

(A) 12 (B) 6 (C) 24 (D) 8 (A) 12 (B) 6 (C) 24 (D) 8


1 1
13. ∫ x − [2x]) dx 
( ; where [.] greater integer 13. ∫ x − [2x]) dx ;
( [.] महत्तम पूर्णांक फलन, बराबर
−1 −1
function equals  :- है :-
(A) 1 (B) 0 (C) 2 (D) 4 (A) 1 (B) 0 (C) 2 (D) 4
14. Equation of directrix of hyperbola whose foci 14. उस अतिपरवलय की नियता का समीकरण, जिसकी
are (6, 8) & (10, 8) and eccentricity 2, are :- नाभियाँ (6, 8) एवं (10, 8) तथा उत्के न्द्रता 2 है होगी:-
(A) x = 9, x = 7 (A) x = 9, x = 7
(B) 7 9 (B) 7 9
x=− : x= x=− : x=
2 2 2 2
(C) 17 15 (C) 17 15
x= : x= x= : x=
2 2 2 2
(D) x = ± 16 (D) x = ± 16
15. If a normal chord of the parabola y2 = 4ax 15. यदि परवलय y2 = 4ax की एक अभिलम्ब जीवा शीर्ष पर
subtend a right angle at the vertex, its slope is- समकोण अन्तरित करती है, तो इसकी प्रवणता है-
(A) ±1 (A) ±1
– –
(B) ±√ 2 (B) ±√ 2
– –
(C) ±√ 3 (C) ±√ 3

(D) None of these (D) इनमें से कोई नहीं


LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 27/32
ALLEN
2
x 2 y x2 y2
16. A chord PQ of the ellipse + = 1  subtends 16. दीर्घवृत्त + = 1  की एक जीवा PQ इसके के न्द्र
9 4 9 4
right angle at its centre. The locus of the point of पर समकोण बनाती है। P तथा Q पर खीचीं गई स्पर्श
intersection of tangents drawn at P and Q is- रेखाओं के प्रतिच्छेद बिन्दु का बिन्दुपथ है-
(A) a circle (B) a parabola (A) एक वृत्त (B) एक परवलय
(C) an ellipse (D) a hyperbola (C) एक दीर्घवृत्त (D) एक अतिपरवलय
17. Vector a^  
in the plane of b⃗ = 2^i + ^j   and 17. सदिश a^  जो कि b⃗ = 2^i + ^j  तथा c ⃗ = ^i − ^j + k^  के
c ⃗ = ^i − ^j + k^  is such that it is equally inclined to  तल में इस प्रकार स्थित है कि b⃗   तथा d  ⃗  से समान कोण
b⃗  and d  where
⃗ 
d ⃗ = ^j + 2k^.  The value of a^  is :- बनाता है जहाँ d ⃗ = ^j + 2k^. तब a^  है :-
i
^
+ j
^
+ k^ i
^
− j
^
+ k^ i
^
+ j
^
+ k^ i
^
− j
^
+ k^
(A) –
(B) –
(A) –
(B) –
√ 3 √ 3 √ 3 √ 3
2^i + ^j 2^i + ^j 2^i + ^j 2^i + ^j
(C) – (D) – (C) – (D) –
√ 5 √ 5 √ 5 √ 5
18. A line segment has length 63 and dr's are 3, –2, 6. If 18. एक रेखाखण्ड की लम्बाई 63 है तथा दिक् अनुपात 3, –2, 6
the line makes an obtuse angle with x-axis. The है। यदि रेखा x-अक्ष से अधिक कोण बनाती है तो रेखा
components of the line vector are :- सदिश के घटक होगे :-
(A) 27, –18, 54 (B) –27, 18, –54 (A) 27, –18, 54 (B) –27, 18, –54
(C) –27, 18, 54 (D) 27, –18, –54 (C) –27, 18, 54 (D) 27, –18, –54
19. The difference between the greatest and the least 19. व्यंजक 3 – cos x + sin2x के संभावित महत्तम व न्यूनतम
possible value of the expression 3 – cos x + sin2x is मानों के बीच का अन्तर है।
(A) 13 (B) 17 (C) 9 (D) 1 (A) 13 (B) 17 (C) 9 (D) 1
4 4 4 4 4 4 4 4
20. The converse of p ⇒ (q ⇒ r) is : 20. p ⇒ (q ⇒ r) का निषेधन है :
(A) (q ∧ ~r) ∨ p (B) (~q ∨ r) ∨ p (A) (q ∧ ~r) ∨ p (B) (~q ∨ r) ∨ p
(C) (q ∧ ~r) ∧ ~p (D) (q ∧ ~r) ∧ p (C) (q ∧ ~r) ∧ ~p (D) (q ∧ ~r) ∧ p
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
LTS / Page 28/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
SECTION-II : (Maximum Marks: 20) खण्ड –II : (अधिकतम अंक: 20)
This section contains 10 questions Candidates have to इस खंड में 10 प्रश्न हैं। उम्मीदवारों को 10 में से किसी भी 5 प्रश्न का
attempt any 5 questions out of 10. If more than 5 प्रयास करना है। यदि 5 से अधिक प्रश्नों का प्रयास किया जाता है, तो
questions are attempted, then only first 5 attempted के वल पहले 5 प्रश्नों का मूल्यांकन किया जाएगा।

questions will be evaluated.


प्रत्येक प्रश्न का उत्तर संख्यात्मक मान (Numerical Value) है।

The answer to each question is a Numerical Value प्रत्येक प्रश्न के लिए, सही संख्यात्मक मान दर्ज करें (दशमलव
Type questions.
संके तन में, दूसरे दशमलव स्थान पर काटे / छांटे गए; जैसे 6.25,
For each question, enter the correct numerical value (in 7.00, –0.33, –30, 30.27, –127.30, यदि उत्तर 11.36777 है
decimal notation, truncated/rounded off to the second ..... तब दोनों 11.36 और 11.37 सही होंगे)

decimal place; e.g. 6.25, 7.00, –0.33, –.30, 30.27, – प्रत्येक प्रश्न के उत्तर का मूल्यांकन निम्नलिखित अंकन योजना के
127.30, if answer is 11.36777..... then both 11.36 and अनुसार किया जाएगा:

11.37 will be correct)


पूर्ण अंक     :   +4 यदि के वल सही संख्यात्मक मान उत्तर के रूप में
Answer to each question will be evaluated according to दर्ज किया गया है।

the following marking scheme:


शून्य अंक   :   0 अन्य सभी मामलों में।
Full Marks    :    +4 If ONLY the correct numerical
value is entered as answer.

Zero Marks  :    0 In all other cases.


1. When 9th term of A.P is divided by its 2nd term 1. जब समान्तर श्रेणी के 9th  वें पद को इसके 2nd  पद से
then quotient is 5 and when 13th term is divided विभाजित किया जाता है, तब भागफल 5 तथा जब 13th वे
by 6th term then quotient is 2 and Remainder is पद को 6th पद से विभाजित किया जाता है। तो भागफल 2
5 then find first term of A.P. :- तथा शेषफल 5 है, तो समान्तर श्रेणी का प्रथम पद ज्ञात करो :-
2. (13)507 when divided by 9 leaves the remainder :- 2. यदि (13)507 में 9 का भाग दिया जाए तो शेषफल होगा :-
3. Let S be the set of points where the 3. यदि S उन सभी बिन्दुओं का समुच्चय है, जिनके
function,  f(x) = |2 − |x − 3|| , x ∈ R, is not लिए फलन,  f(x) = |2 − |x − 3|| , x ∈ R,
differentiable.  Then ∑ f (f (x))  is equal to अवकलनीय नहीं है, तो ∑ f (f (x))  बराबर है
x∈S x∈S
__________.  __________. 
LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015
E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 29/32
ALLEN

4. If ƒ(x) = |x2 – 4| and g(x) = ƒ(ƒ(x)). If 4. यदि ƒ(x) = |x2 – 4| तथा g(x) = ƒ(ƒ(x)). यदि 
– – g′ (1) ∣
∣ – – ∣ g′ (1) ∣
−√ 2 < x < √ 2, then ∣  is
−√ 2 < x < √2, तब ∣ ∣  =

2 ∣ ∣ 2 ∣

5. At present a firm is manufacturing 2000 items. 5. वर्तमान में एक फर्म 2000 नग बना रही है। यह अनुमान
It is estimated that the rate of change of लगाया गया है कि अतिरिक्त कामगारों की संख्या x के
production P w.r.t. additional number of सापेक्ष उत्पादन P के परिवर्तन की दर 
dP dP
workers x is given by = x−.
100 − 12√− If = 100 − 12√−
x− द्वारा प्रदत्त है। यदि फर्म 25
dx dx
the firm employs 25 more workers, then the कामगार अधिक लगाती है, तो नगों के उत्पादन का नया
new level of production of items is : स्तर है :

1 + x 8 + x 16 x5 x8 1 + x 8 + x 16 x5 x8
6. Let ∫ dx = x + + + C, 6. माना ∫ dx = x + + + C
1 + x4 + x8 a b 1 + x4 + x8 a b

then the value of a + b is : , तब a + b का मान होगा :

7. A line is drawn through the point P(3, 11) to 7. बिन्दु P(3, 11) से गुजरने वाली एक रेखा खीचीं जाती है
cut the circle x2 + y2 = 9 at A and B. Then जो वृत्त x2 + y2 = 9 को A और B पर काटती है तो
PA.PB is equal to- PA.PB का मान होगा-

8. The value of a for which the image of the 8. यदि बिन्दु (a, a – 1) का रेखा 3x + y = 6a के सापेक्ष
point (a, a – 1) w.r.t. the line mirror 3x + y = 6a
प्रतिबिम्ब (a2 + 1, a) है तो a का मान होगा :-
is the point (a2 + 1, a) is :- 

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 30/32 Space for Rough Work / रफ कार्य के लिए जगह E + H / 30012022
ALLEN
9. Two vertical poles of heights, 20m and 80m 9. 20 मी. तथा 80 मी. ऊँ चाई वाले दो खंभे, एक
stand a part on a horizontal plane. The height क्षैतिज समतल पर सीधे खड़े हैं। प्रत्येक खंभे के
(in meters) of the point of intersection of the शिखर को दूसरे खंभे के पाद से मिलाने वाली
lines joining the top of each pole to the foot of रे खाओं के प्रतिच्छे दन बिंदु की इस समतल से
the other, from this horizontal plane is : ऊँ चाई (मीटरों में) है :-

10. If mode of freq. list is 22 and 10 > y > x, then y =


10. यदि बारम्बारता बंटन का बहुलक 22 है तथा10 > y > x, तब y = 

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


E + H / 30012022 Space for Rough Work / रफ कार्य के लिए जगह LTS / Page 31/32
Space for Rough Work / रफ कार्य के लिए जगह

LEADER TEST SERIES / JOINT PACKAGE COURSE 0999DJM210321015


LTS / Page 32/32 E + H / 30012022

You might also like