You are on page 1of 2

NxHEV160 October 2021

Rotary screw compressor - oil injected - air cooled CAP722-NxHEV160

Variable Speed Drive (NxHEV160 kW)


60 Hz USA
Compressor Rated Pressure psi(g) 100-125-150
Operating Pressure psi(g) 100-125-150
Nominal drive motor power kW (hp) 160 (220)
Nominal voltage V 460
Electrical data

Nominal current at nominal voltage (FLA) Amp 233.0


Drive motor enclosure / Insulation IP55 / ISO F
Drive motor nominal speed / frequency rpm / Hz 1785 / 60
Nominal drive motor efficiency % 96.2
Nominal fan motor power (60Hz) kW (hp) 5.5 (7.5)
Cooling data Airend

Airend type SAT72G

Compr. air temp. at 68°F ambient and max. pressure °F 89.6


Ambient temp. standard (min / max) °F 37.4 - 113
Cooling air capacity fan cfm 16480
Static back pressure (at 95° / 104° / 113°F) Pa 300
Dimensions (with or without optional dryer) (l x w x h) inch 137.8 x 84.9 x 78.7
Dimensions / weight

Weight compressor lbs 13228


/ others

Compressed air outlet - Flange, ANSI NPT


Oil capacity gal 42.3
Residual oil content of air / with dryer 3
mg/m (ppm) 2 -4 (1 - 3)
Noise level at 100% load (EN ISO 2151) dB(A) 83±3

*Reference conditions according to DIN ISO 7183 (t ambient=77 °F, t inlet= 90°F, p= 100 psi)
Total package power compressor with dryer = Total package power compressor + total package power dryer
Max. operating pressure (compressor incl. dryer version) = Max. operating pressure compressor - pressure drop dryer
Total weight compressor incl. dryer = Total weight compressor + weight dryer
NxHEV160 October 2021

Rotary screw compressor - oil injected - air cooled CAP722-NxHEV160

` `
Variable Speed Drive (NxHEV160kW)
60 Hz USA

NxHEV160-100 PSI NxHEV160-125 PSI


n acfm P1 (kW) n acfm P1 (kW)
500 453.50 76.13 500 445.23 81.15
1000 906.99 148.26 1000 890.46 158.29
1344 1219.00 197.88 1269 1130.00 199.80

NxHEV160-150 PSI
n acfm P1 (kW)
500 436.50 91.50
1000 873.00 179.00
1152 1005.70 205.60

Note:
P1 = total package power compressor
Effective volume flow and total package power compressor in accordance with ISO 1217 / Annex C

You might also like