Professional Documents
Culture Documents
1. DME by Faires
FLAT LEATHER BELT
Design Problem:
A squirrel cage, line starting motor is rated at 30hp at 1750 rpm and
delivers its power to a horizontal, flat leather belt located in a dusty
atmosphere. The motor pulley is 10 inch in diameter. What width of
medium double-ply belt is needed.
A squirrel cage, line starting motor is rated at 30hp
at 1750 rpm and delivers its power to a horizontal,
flat leather belt located in a dusty atmosphere. The
motor pulley is 10 inch in diameter. What width of
medium double-ply belt is needed?
Formula to be used:
1. 𝑉m = 𝜋𝐷n
2. Nominal hp = (hp/in., Table 17.1)(bCmCp)(Cf1Cf2….)
A squirrel cage, line starting motor is rated at 30hp at 1750 rpm
and delivers its power to a horizontal, flat leather belt located in a
dusty atmosphere. The motor pulley is 10 inch in diameter. What
width of medium double-ply belt is needed?
𝑉m = 𝜋𝐷n
10
= 𝜋( ) 1750 = 4580 𝑓𝑝𝑚
12
1. DME by Faires
V-BELTS
Design Problem:
A rotating pump is to be driven by a 50 hp, 2400 rpm by a diesel
engine. The pump will operate at 800 rpm and using type B75 V-belt.
The available small sheave and large sheave diameter is 6inch and 12
inches, respectively. Find the number of belts used.
Design Problem:
A rotating pump is to be driven by a 50 hp, 2400 rpm by a diesel
engine. The pump will operate at 800 rpm and using type B75 V-belt.
The available small sheave and large sheave diameter is 6inch and 12
inches, respectively. Find the number of belts used.
Formulas to be used:
103 0.09 𝑐 𝑉𝑚 2 𝑉𝑚
𝑅𝑎𝑡𝑒𝑑 𝐻𝑝 = [𝑎( ) − − e 6] 3
𝑉𝑚 𝐾𝑑 𝐷1 10 10
𝑉𝑚 =3770 fpm
𝑎 = 4.737
c = 13.962
e = 0.0234
Design Problem:
A rotating pump is to be driven by a 50 hp,
2400 rpm by a diesel engine. The pump will
operate at 800 rpm and using type B75 V-belt.
The available small sheave and large sheave
diameter is 6inch and 12 inches, respectively.
Find the number of belts used.
103 0.09 𝑐 𝑉𝑚 2 𝑉𝑚
𝑅𝑎𝑡𝑒𝑑 𝐻𝑝 = [𝑎( ) − − e 6] 3
𝑉𝑚 𝐾𝑑 𝐷1 10 10
𝑉𝑚 =3770 fpm
𝑎 = 4.737
c = 13.962
e = 0.0234 𝐷2 12
𝐾𝑑 = 1.13 = =2
𝐷1 6
Design Problem:
A rotating pump is to be driven by a 50 hp,
2400 rpm by a diesel engine. The pump will
operate at 800 rpm and using type B75 V-belt.
The available small sheave and large sheave
diameter is 6inch and 12 inches, respectively.
Find the number of belts used.
103 0.09 𝑐 𝑉𝑚 2 𝑉𝑚
𝑅𝑎𝑡𝑒𝑑 𝐻𝑝 = [𝑎( ) − − e 6] 3
𝑉𝑚 𝐾𝑑 𝐷1 10 10
𝐷𝑒𝑠𝑖𝑔𝑛 𝐻𝑝 60 𝐻𝑝
No. of Belts = =
𝐴𝑑𝑗𝑢𝑠𝑡𝑒𝑑 𝑅𝑎𝑡𝑒𝑑 𝐻𝑃 6.23 𝐻𝑝