Professional Documents
Culture Documents
Input Parameters
Fill % 40 The table to the left contains cable and conduit parameters that may be selected
with the exception of Cable Area. The selected values are used to populate the two
lower tables that have standard values.
Units Inches (in)
For custom conduit, duct, raceway and cable tray inputs, scroll to the bottom of the
Conduit Type EMT page.
DISCLAIMER: These calculations are provided for guidance purposes only. They are provided “as is” and should not be
Cable Type N/A relied upon without consultation with and supervision of experienced personnel and a local CommScope
representative. CommScope makes no representations or warranties of any kind related to these tools, whether
express or implied, and specifically disclaims and excludes any representation or warranty of merchantability, quality,
content, completeness, suitability, adequacy, accuracy, noninfringement or fitness for a particular purpose and any
Cable O.D. 0.394 representation arising by usage of trade, course of dealing or course of performance. CommScope is under no
obligation to issue any upgrades, update specifications or notify users of this tool that changes have been made. The
user of these tools assumes all risks associated with such use, and CommScope hereby disclaims any and all liability
Cable Area 0.122 for damages of any kind resulting from such use.
Trade Size Conduit I.D. (in) Conduit Area Fill Area # Cables
Custom Conduit
1 of 2
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. July 10, 2018
Cabling & Pathway Estimator Summary
Trade Size Width (in) Height (in) Duct Area Fill Area # Cables
2 of 2
©2018 CommScope, Inc. All rights reserved. All trademarks identified by ® or ™ are registered trademarks, respectively, of CommScope. July 10, 2018