Professional Documents
Culture Documents
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series HM212000
Dimensions
2.6250 in
d - Bore
66.675 mm
5/31/2023 | Page 2 of 4
4.8125 in
D - Cup Outer Diameter
122.238 mm
1.5100 in
B - Cone Width
38.354 mm
1.1700 in
C - Cup Width
29.718 mm
1.5000 in
T - Bearing Width
38.100 mm
-0.43 in
a - Effective Center Location3
-10.9 mm
62700 lbf
C0 - Static Radial Rating
279000 N
Factors
K - Factor7 1.73
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
1.1700
0.15
1.5100
4.8125
2.6250
4.25
2.97
3.23
4.60
-0.43
IMPERIAL UNITS
ISO Factor - e 0.34
ISO Factor - Y 1.78 HM212049 - HM212011
Bearing Weight 4.1 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 17 Imperial
Effective Center Location -0.43 inch
K Factor 1.73
Dynamic Radial Rating - C90 15600 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 8990 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 62700 lbf
Dynamic Radial Rating - C1 60000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY