Professional Documents
Culture Documents
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Specifications
Series HM237500
37.20 lb
Bearing Weight
16.90 Kg
Dimensions
11/17/2022 | Page 2 of 4
6.5 in
d - Bore
165.1 mm
11.3750 in
D - Cup Outer Diameter
288.925 mm
2.5 in
B - Cone Width
63.5 mm
1.8750 in
C - Cup Width
47.625 mm
2.5000 in
T - Bearing Width
63.5 mm
-0.46 in
a - Effective Center Location3
-11.7 mm
11/17/2022 | Page 3 of 4
278000 lbf
C0 - Static Radial Rating
1240000 N
Factors
K - Factor7 1.83
on use.
8 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
9 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
10 Geometry constant for Lubrication Life Adjustment Factor a3l.
1.8750
0.20
2.5000
11.3750
6.5000
10.47
10.69
7.24
7.68
-0.46
IMPERIAL UNITS
ISO Factor - e 0.32
ISO Factor - Y 1.88 HM237535 - HM237510
Bearing Weight 37.2 lb Tapered Roller Bearings - TS (Tapered Single)
Number of Rollers Per Row 23 Imperial
Effective Center Location -0.46 inch
K Factor 1.83
Dynamic Radial Rating - C90 56900 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 31100 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 278000 lbf
Dynamic Radial Rating - C1 219000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY