Professional Documents
Culture Documents
Part Number 2875 - 2820, Tapered Roller Bearings - TS (Tapered Single) Imperial
This is the most basic and most widely used type of tapered roller bearing. It consists of two main separable parts:
the cone (inner ring) assembly and the cup (outer ring). It is typically mounted in opposing pairs on a shaft.
Speci cations | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors
Speci cations
Series 2800
0.50 Kg
Bearing Weight
1 lb
Dimensions
31.750 mm
d - Bore
1.2500 in
6/8/2021 | Page 2 of 4
73.025 mm
D - Cup Outer Diameter
2.8750 in
23.813 mm
B - Cone Width
0.9375 in
17.463 mm
C - Cup Width
0.6875 in
22.225 mm
T - Bearing Width
0.8750 in
-5.6 mm
a - Effective Center Location3
-0.22 in
18800 lbf
C0 - Static Radial Rating
83800 N
Factors
K - Factor7 1.59
0.12
0.9375
2.8750
1.2500
2.48
1.52
1.77
2.72
-0.22
IMPERIAL UNITS
ISO Factor - e 0.37
ISO Factor - Y 1.63 2875 - 2820
Bearing Weight 1 lb TS BEARING ASSEMBLY
Number of Rollers Per Row 17
Effective Center Location -0.22 inch
K Factor 1.59
Dynamic Radial Rating - C90 4260 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 2690 lbf
NORTH CANTON, OHIO USA Static Radial Rating - C0 18800 lbf
Dynamic Radial Rating - C1 16400 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY