Professional Documents
Culture Documents
Part Number M249748DW - M249710, Tapered Roller Bearings - TDI (Tapered Double
Inner) Imperial
TDI bearings have a one-piece double inner race and two single outer races and are typically supplied complete with an
outer race spacer as a pre-set assembly. The bearing can be used at fixed positions on rotation shaft applications. For
rotating housing application it can be used to float on the stationary shaft.
Specifications | Dimensions | Abutment and Fillet Dimensions | Basic Load Ratings | Factors | Spacer
Specifications
Series M249700
4.90 lb
Bearing Weight
2.2 Kg
Dimensions
1/14/2023 | Page 2 of 4
10 in
d - Bore
254 mm
14.1250 in
D - Cup Outer Diameter
358.775 mm
5.1250 in
B - Double Cone Width
130.175 mm
2.125 in
C - Cup Width
53.975 mm
5.1249 in
T - Bearing Width across Cups
130.172 mm
Factors
K - Factor7 1.76
Spacer
Note Spacer shows standard nominal .01 radii, actual bearing may vary
10 These factors apply for both inch and metric calculations. Consult your Timken representative for instruction
on use.
11 Geometry constant for Lubrication Life Adjustment Factor a3l.
5.1249
5.1250
14.1250
10.0000
13.19
10.73
IMPERIAL UNITS
ISO Factor - e 0.33
ISO Factor - Y1 2.03 M249748DW - M249710
ISO Factor - Y2 3.02 Tapered Roller Bearings - TDI (Tapered Double
Bearing Weight 4.9 lb Inner) Imperial
Number of Rollers Per Row 33
K Factor 1.76
Dynamic Radial Rating - C90 53300 lbf
THE TIMKEN COMPANY Dynamic Thrust Rating - Ca90 30300 lbf
NORTH CANTON, OHIO USA Dynamic Radial Rating - C90(2) 92800 lbf
Radial Rating - C1 358000 lbf
Every reasonable effort has been made to ensure the accuracy of the information contained in this writing, but no
liability is accepted for errors, omissions or for any other reason. FOR DISCUSSION ONLY