Professional Documents
Culture Documents
R2022x
About this Course
Course objectives
Upon completion of this course you will be able to:
Targeted audience
This course is intended for all roles that enable the Plastic Part Filling app, including:
Interior Designer, Plastic Mechanical Designer, Mold & Compensation Engineer, Mold
Designer, Mold & Tooling Designer, Product Enclosure Designer
Prerequisites
None.
1 day
Day 1
Lesson 1 Introduction
Lesson 3 Postprocessing
simulation approach.
Structures Electromagnetics
Multibody Fluids
Durability Automation
Vibro-acoustics Optimization
Join the Community!
Go to www.3ds.com/slc to log in or join!
www.3ds.com | © Dassault Systèmes
SIMULIA Training
https://www.3ds.com/products-services/simulia/training/
www.3ds.com | © Dassault Systèmes
Legal Notices
The software described in this documentation is available only under license from Dassault
Systèmes or its subsidiaries and may be used or reproduced only in accordance with the terms of
such license.
This documentation and the software described in this documentation are subject to change
www.3ds.com | © Dassault Systèmes
This course is intended for 3DEXPERIENCE platform R2022x FD02 (FP.2214) or later.
Lesson content:
Introduction
www.3ds.com | © Dassault Systèmes
1 hour
L2.1
Lesson 2: Simulation Setup for Injection Molding
Lesson content:
Materials
Process Settings
Injection Location
Mesh Setup
Feature Manager
Simulate
Workshop Preliminaries
Workshop Files
1 hour
W1.1
Workshop 1: Simulation Setup for a Smoke Alarm Cover
In this workshop, you will create a simulation setup for the three-dimensional model of the
Smoke Alarm top cover shown below.
30 minutes
L3.1
Lesson 3: Postprocessing
Lesson content:
Job Monitoring
www.3ds.com | © Dassault Systèmes
1.5 hours
W2.1
Workshop 2: Smoke Alarm Simulation, Postprocessing and Modification
In this workshop, you will run, monitor and postprocess the Smoke Alarm top cover simulation.
After reviewing the simulation results you will modify the scenario and re-run the simulation to
examine the changes.
www.3ds.com | © Dassault Systèmes
30 minutes