Professional Documents
Culture Documents
SLUMP CONE
TEST
CONSTRUCTION MATERIALS AND
Subject :
TESTING
Submit by : GROUP3_BSCE_2P
USTP-CDO | Slump Cone Test Presentation | 02
OBJECTIVES
01 02
UNDERSTANDING THE SIGNIFICANCE EXPLAINING THE PROCEDURES
To understand the significance of the slump cone To explain the step-by-step procedures
test in assessing the workability of concrete. involved in conducting the slump cone test.
03 04
DESCRIBING THE APPARATUS VISUAL PRESENTATION
To describe the apparatus required for the slump To visually enhance the discussion by including
cone test, including the slump cone itself and the photos depicting the apparatus and stages of
tamping rod. the slump cone test.
USTP-CDO | Slump Cone Test Presentation | 03
SLUMP CONE
The slump cone is a standardized apparatus used in the
construction industry to measure the consistency or workability of
fresh concrete. It consists of a conical shape made of metal or
plastic, with specific dimensions and markings. The cone is filled
with freshly mixed concrete, compacted, and then the cone is
slowly lifted vertically. The resulting slump, or vertical settlement
of the concrete, is then measured using a ruler or other measuring
device.
|https://cementconcrete.org/concrete/concrete-slump-test/2171/|
USTP-CDO | Slump Cone Test Presentation | 04
SIGNIFICANCE
Slump cone testing is highly significant in assessing the workability and quality
of concrete. The slump test assesses the consistency and fluidity of the
concrete mix, as well as the water to cement ratio. This test can identify any
defects or inconsistencies in the mix, allowing for adjustments to be made to
ensure the finished product is of high quality. Overall, slump testing can help
ensure the structural integrity, durability, and overall performance of the
concrete.
https://theconcretenetwork.co.uk/what-is-a-concrete-slump-test-and-why-is-it-important/
USTP-CDO
ASTM C143/C143M
This test method covers the determination of the slump of hydraulic-cement concrete, both
in the laboratory and in the field. It provides a measure of the consistency of fresh concrete.
The standards provide guidance on the equipment used (slump cone, tamping rod,
measuring device), the procedure for conducting the test, and the interpretation of the
slump measurement.
| https://www.astm.org/c0143_c0143m-12.html |
USTP-CDO | Slump
| Business
Cone Test
Marketing
Presentation
| | 06
PLEASE NOTE
Additional standards or guidelines may exist All the apparatus should be free from moisture or any
depending on the specific application or other affluent and also it should be in dry condition.
requirements of the slump cone testing.
The base plate or surface should be free from This test is done just after sampling nearly after 2
vibrations or shocking. minutes.
USTP-CDO
07
USTP-CDO
08
USTP-CDO
cone.
09
USTP-CDO
10
USTP-CDO | Slump Cone Test Presentation | 11
PROCEDURE 01
Place the cone on a flat, smooth, horizontal
surface and stand on the footholds either
side to ensure the cone is planted firmly on
the ground
PROCEDURE 02
Fill the cone in three layers, using the steel
tamping rod to compact — or tamp — the
https://www.totalconcrete.co.uk/news/concrete-slump-tests-measuring-the-workability-of-concrete/ |
USTP-CDO | Slump Cone Test Presentation | 12
PROCEDURE 03
Once the cone is filled, remove any overflowing
concrete from the top, making sure the concrete
fills the cone exactly to the top level. Remove any
spilled concrete from the base of the cone, too.
PROCEDURE 04
Lift the cone vertically, using a slow and steady
motion until the cone is clear of the concrete.
| www.reallygreatsite.com |
https://www.totalconcrete.co.uk/news/concrete-slump-tests-measuring-the-workability-of-concrete/ |
USTP-CDO | Slump Cone Test Presentation | 13
PROCEDURE 05
The concrete will subside — or slump. To
measure the slump, place the steel rod across
the top of the upturned cone so it overhangs the
concrete.
PROCEDURE 06
Now, measure from the rod down to the top of
the slump. The level of slump is measured to the
| www.reallygreatsite.com |
https://www.totalconcrete.co.uk/news/concrete-slump-tests-measuring-the-workability-of-concrete/ |
USTP-CDO | Slump Cone Test Presentation | 14
RESULTS OF SLUMP
TEST ON CONCRETE
USTP-CDO Finish
THANK YOU
CONSTRUCTION MATERIALS AND CAGAS, JALAGAT, MANALO, MARTE,
Subject : Submit by :
TESTING REDONDO, SACABIN,TIMOLA, & TUBAL