Professional Documents
Culture Documents
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m
Antenna Specifications
Electrical Properties
2 x (690 - 894) (Lr1/Rr2)
Frequency range (MHz)
690 - 824 824 - 894
Polarization +45° , -45°
Electrical downtilt (°) 2 - 12 , continuously adjustable , each band separately
Gain (dBi) 15.0 15.7
Vertical side lobe suppression
> 16 > 16
above main beam (dB)
Horizontal 3dB beam width (°) 68 ±6 67 ±7
Vertical 3dB beam width (°) 10.5 ±0.7 9.5 ±0.8
VSWR < 1.5
Cross polar isolation (dB) ≥ 28
Interband isolation (dB) ≥ 28
Front to back ratio, ±30° (dB) > 25
Cross polar ratio (dB) 0° > 16
Max. effective power per port (W) 400 (at 50℃ ambient temperature)*
Intermodulation IM3 (dBc) ≤ -150 (2 x 43 dBm carrier)
Impedance (Ω) 50
Grounding DC Ground
* Max. effective power whole antenna: 1000 W (at 50℃ ambient temperature)
1
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m
Notes:
65° broadcast beams and multi-beams are applicable in different scenarios. Select one of them for network coverage based on
site requirements and auxiliary equipment conditions.
2
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m
Mechanical Properties
Antenna dimensions (H x W x D) (mm) 2009 x 499 x 206 68
Packing dimensions (H x W x D) (mm) 2360 x 550 x 245
Antenna weight (kg) 37.0
(530)
Clamps weight (kg) 6.3 (2 units)
Antenna packing weight (kg) 52 (Included clamps)
Mast diameter supported (mm) 50 - 115
Radome material Fiberglass
Radome colour Light grey
Operational temperature (℃) -40 .. +65
2009
1420
Frontal: 730 (at 150 km/h)
Wind load (N) Lateral: 380 (at 150 km/h)
Maximum: 955 (at 150 km/h)
Max. operational wind speed (km/h) 200
Survival wind speed (km/h) 250
Connector 13 x 4.3-10 Female
59
Connector position Bottom
Accessories
Unit: mm
Item Model Description Weight Units per antenna
Downtilt kit ASMDT0H01 Mechanical downtilt: 0 - 12 ° 3.1 kg 1 (Separate packing)
RET S/N:
HWMxxx……Lr1
HWMxxx…….y1
HWMxxx…...Rr2
RAE S/N:
HWXxxx……y1
r - Red y - Yellow
L - Left array R - Right array
3
ASI4518R54v06
D06X-2x(690-894)/4x(2300-2690)-3x65-16i/16i/18i-3xM-R
EasyRET 12-port 2L FDD/2.3-2.69GHz TDD 8T8R Antenna with 3 Integrated RCUs
- 2.0m
690 - 894 MHz TDD Single column TDD 65° Broadcast TDD Service 0°
RAE Properties
RAE type Integrated RAE
RAE protocols AISG-ES-RAE V2.1.0
Standards: EN/IEC 60950-1(Safety), EN/IEC 60950-22(Safety – Equipment installed outdoor), EN 55032 (Emission),
EN/IEC 62368-1(Safety), ETSI EN 301 489, FCC Part15, ICES-003
Certification: CE, FCC, IC, RCM, RoHS, REACH, WEEE
NOTE
1. Facilities, such as towers and poles, must bear the weight and wind load of antennas.
2. HUAWEI ‘s standard brackets and accessories must be used for any installation.
3. The antenna working environment must meet the requirements specified in the datasheet.
4. Only qualified personnel are allowed to perform installation. Installation tools and procedures must conform to requirements
described in the antenna installation guide.
5. In the effort to improve our products, all specifications are subject to change without notice.
Huawei Technologies Co., Ltd. Bantian, Longgang District, Shenzhen 518129, P.R.China www.huawei.com/antenna
4 Issue: 2021-01-22