Professional Documents
Culture Documents
OBJECTIVES:
1.To learn basic concepts of the metrology and importance of measurements.
2.To teach measurement of linear and angular dimensions’ assembly and transmission elements.
3.To study the tolerance analysis in manufacturing.
4.To develop the fundamentals of GD & T and surface metrology.
5.To provide the knowledge of the advanced measurements for quality control in manufacturing industries.
Unit
Unit Description Starting Date Finishing Date No. of Hours Test Plan.
No.
1. BASICS OF METROLOGY 12
IA -I
MEASUREMENT OF LINEAR,
ANGULAR DIMENSIONS, 12
2. ASSEMBLY AND TRANSMISSION MODEL
ELEMENTS
12 IA-II EXAM
3. TOLERANCE ANALYSIS
12
4. METROLOGY OF SURFACES
IA -III
12
5. ADVANCES IN METROLOGY
Page 1 of 5
COURSE OUTCOMES:
At the end of the course the students would be able to
1. Discuss the concepts of measurements to apply in various metrological instruments.
2.Apply the principle and applications of linear and angular measuring instruments, assembly and transmission elements.
3. Apply the tolerance symbols and tolerance analysis for industrial applications.
4. Apply the principles and methods of form and surface metrology.
5. Apply the advances in measurements for quality control in manufacturing Industries.
TEXT BOOK:
1. Dotson Connie, “Dimensional Metrology”, Cengage Learning, First edition, 2012
2. Mark Curtis, Francis T. Farago, “Handbook of Dimensional Measurement”, Industrial Press, Fifth edition, 2013.
REFERENCES:
1. AmmarGrous, J “Applied Metrology for Manufacturing Engineering”, Wiley-ISTE, 2011.
2. Galyer, J.F.W. Charles Reginald Shotbolt, “Metrology for Engineers”, Cengage Learning EMEA; 5th revised edition, 1990.
3. National Physical LaboratoryGuideNo. 40, No. 41, No. 42, No. 43, No. 80, No. 118, No.130, No. 131. http://www.npl.co.uk.
4. Raghavendra N.V. and Krishnamurthy. L., Engineering Metrology and Measurements, Oxford University Press, 2013.
5. Venkateshan, S. P., “Mechanical Measurements”, Second edition, John Wiley &Sons, 2015.
Page 2 of 5
UNIT I
BASICS OF METROLOGY
Blooms
Reference Hours as Estimated Mode of Course
Sl. No. Description Taxonomy
per syllabus hours teaching* outcome
Level
1 Measurement 1 2 BBP/PPT CO 1 Understand
Krishnamurthy.
Estimation
4 Statistical analysis of measurement data 2 2 BBP/PPT CO 1 Evaluate
Calibration of measuring instruments, BBP/PPT
5 ISO standards. 2 2 CO 1 Apply
2013.
and
6 Coaching/Revision - 2 BBP/PPT CO 1 Apply
TOTAL 9 12
UNIT II
MEASUREMENT OF LINEAR, ANGULAR DIMENSIONS, ASSEMBLY AND TRANSMISSION ELEMENTS
Blooms
Reference Hours as per Estimated Mode of Course
Sl. No. Description Taxonomy
syllabus hours teaching* outcome
Level
and
L.,
Engineering Metrology and
1 Linear Measuring Instruments Oxford 1 2 BBP/PPT CO 2 Understand
BBP/PPT
3 Angular measuring instruments 2 2 CO 2 Understand
Krishnamurthy.
Measurements,
BBP/PPT
4 Measurement of Screw threads 2 2 CO 2 Evaluate
Raghavendra
BBP/PPT
5 Measurement of Gears 2 2 CO 2 Evaluate
BBP/PPT
6 Coaching/Revision - 2 CO 2 Apply
9 12
Page 3 of 5
TOTAL
UNIT III
TOLERANCE ANALYSIS
Blooms
Reference Hours as per Estimated Mode of Course
Sl. No. Description Taxonomy
syllabus hours teaching* outcome
Level
TolerancingInterchangeability, Selective
Krishnamurthy.
3 2 2
BBP/PPT
CO 3 Understand
Engineering
4 Tolerance analysis in manufacturing, 2 2 BBP/PPT CO 3 Apply
5 tolerance stackup, tolerance charting. 1 2 BBP/PPT CO 3 Apply
2013.
and
6 Coaching/Revision - 2 BBP/PPT CO 3 Evaluate
TOTAL 9 12
UNIT IV
METROLOGY OF SURFACES
Blooms
Reference Hours as per Estimated Mode of Course
Sl. No. Description Taxonomy
syllabus hours teaching* outcome
Level
1 Fundamentals of GD & T 1 2 BBP/PPT CO 4 Understand
Raghavendra N.V. and
L.,
Engineering Metrology and
Oxford
Inspection of geometric deviations like BBP/PPT
2 1 1 CO 4 Apply
straightness,
University Press, 2013.
Measurements,
Page 4 of 5
UNIT V
ADVANCES IN METROLOGY
Blooms
Reference Hours as per Estimated Mode of Course
Sl. No. Description Taxonomy
syllabus hours teaching* outcome
Level
1 Lasers in metrology 1 2 BBP/PPT CO 5 Understand
and
Metrology and
L., Engineering
Krishnamurthy.
2 Laser interferometers BBP/PPT
Measurements,
2 2 CO 5 Understand
Raghavendra
3 Computer Aided Metrology 2 2 BBP/PPT CO 5 Apply
4 Machine Vision 2 2 BBP/PPT CO 5 Apply
5 Computed tomography 2 2 BBP/PPT CO 5 Understand
N.V.
6 Coaching/Revision - 2 BBP/PPT CO 5 Understand
TOTAL 9 12