Professional Documents
Culture Documents
FABRIC REQUIREMENTS
0.6 m Shell Fabric
0.3 m lining Fabric
0.4 m foam Interfacing
FABRIC RECOMMENDATIONS
Shell - Medium/Heavy Weight Woven Fabric.
Lining - Light Weight Woven Fabric.
NOTIONS
1 Magnetic Snap Button
PRINTING:
BAG SHELL:
BAG LINING:
The seam allowance on this pattern is of 1 cm/3/8” and it’s already included in the pattern pieces.
Apply interfacing to the wrong side of the bag shell pattern piece.
1 Fold the upper edge of the lining pocket 1 cm towards the wrong side and then fold again 1 cm inwards
(the raw edge will be copncealed within the fold). Topstitch 0.5 cm away from the folded edge.
Then fold the remaining raw edges 1 cm towards the wrong side.
4 Lay the side seams flat. This will create a triangular shape
in the bottom of your bag. Press the side seams open and sew
a seam 4 cm away from the edge opf the traingle. This seam
7 Repeat steps 4 and 5 and then turn the bag shell to the right side.
bottom corner.
9 Fold the inside straps and scrunchie straps and sew along the raw edge creating 4 tubes (2 short
11 Feed the inside strap through the scrunchie strap. This will create the scrunchie effect.
Then sew the opening closed making sure that you catch the inside strap in your seam.
5 cm
5 cm
12 Place the straps right sides facing
TA DA!