Professional Documents
Culture Documents
This Quick Guide does not replace the Instructions for Use. Please Indications:
Manufacturer Implant Torque (Ncm) Torque Settings Driver & Head
Impression techniques – implant level review the instructions for use included with the products. – After a one-stage procedure when i
position is desired at the time of im
– After a two-stage procedure when a
BioHorizons
Implant Torque Specification Guide
Product images are not necessarily to scale.
restoration has been in place and th
CLOSED TRAY AND OPEN TRAY QUICK GUIDE
In order to improve
®
readability, Nobel Biocare does not use TM/ in running text. In so doing,
NobelReplace ™ (1.25 mm) Hex however, Nobel Biocare does not waive any right to the trademark or registered mark and
Internal 3.5, 4.5, 5.7 30 Ncm 0.050” nothing herein shall be construed to the contrary.
This Quick Guide does not replace the Instructions for Use. Please Indications:
Tapered Internal 3.5, 4.5, 5.7 30 Ncm 0.050” (1.25 mm) Hex
NobelReplace ™
Ensure you are applying the right amount of torque for your patient’s
review the instructions for use included with the products. – After a one-stage procedure when indexing of the implant
Impression techniques
techniques –– implant
implant level
however, Nobel Biocare CLOSED
does not waiveTRAYStep
any 1 the trademark
right AND
to OPENorTRAY
registeredQUICK
mark and GUIDE
External Implant 4.0, 5.0 CLOSED TRAY AND OPEN TRAY
30 Ncm
Impression
NobelReplace
0.050” NobelReplace
(1.25 ™
QUICK GUIDE
mm) Hex
level ™ nothing herein shall be construed to the contrary.
– Remove the Healing Abutment NobelReplace™ using
This Quick Guide does not replace the Instructions for Use. Please
Indications:
1 2
Nobel Biocare®
Angulated Screw Channel 35 Ncm Nobel Biocare® Omnigrip
NobelReplace™ // Impression techniques – Implant level // Closed tray and open tray quick guide NobelReplace™ // Impression techniques – Implant level // Closed tray and open tray quick guide
NobelReplace™ RP 4.3 35 Ncm Nobel Biocare® Unigrip Step 1 Step 2 Step 3
NobelReplace™ Open tray
// Impression instructions
techniques Remove Healing Abutment
– Implant level // Closed tray and open tray quick guide Place Open-tray Coping Seat Tray Over Guide Pins
NobelReplace™ WP 5.0 35 Ncm Nobel Biocare® Unigrip
Open tray instructions
Open tray instructions
Step 1
Step 1 1 2 3
– Remove
Step 1 the Healing Abutment NobelReplace™ using 1 2 3
NobelReplace™ 6.0 35 Ncm Nobel
Open Biocare®
tray
– RemoveUnigrip
instructions
the Healing Abutment NobelReplace™ using Open tray
1 instructions 2 3
Screwdriver
–Unigrip
Remove Unigrip
the and by
Healing rotating itNobelReplace™
Abutment counterclockwise.
using
Screwdriver
Open and by rotating it counterclockwise.
tray instructions
Step 1 Screwdriver Unigrip and by rotating it counterclockwise. Step 1
Brånemark System™ NP 3.3 35 Ncm Nobel Biocare®
Step 1
Unigrip
Step 2 1 2 3 1 2
– Remove Stepthe2Healing Abutment NobelReplace™ using – Remove the Healing Abutment NobelReplace™ using
– Remove the– Place
Step
Healing the
2 open trayNobelReplace™
Abutment impression coping using into the implant.
1 2 3
– Place the open tray impression
Screwdriver Unigrip and by rotating it counterclockwise. coping into the implant. Screwdriver Unigrip and by rotating it counterclockwise.
Brånemark System™ RP 3.75, 4.0 35 Ncm Nobel Biocare®
Screwdriver Unigrip
Ensure thatUnigrip
Ensure that
– Place
the and therotating
thebyopen
tri-channel
tri-channel
confitray
configuration on the impression
it impression
gurationcounterclockwise. coping into the implant.
on the impression
Step 2 coping engages coping engages the tri-channel connection in the implant. Step 2
the tri-channel
Ensure connection in
that the tri-channel the guration
confi implant. on the impression
Brånemark System™ WP 5.0, 5.5 35 Ncm Nobel Biocare®
Step 2 Unigrip
– Place the open – Tighten the guide pin using theimplant.
Screwdriver Unigrip.
–– Place
Tighten thetray
the
open impression
guide tray pin
coping using coping
engages
impression the into
Screwdriver
the
coping the the Unigrip.
tri-channel
into connection in the implant.
implant. – Place the open tray impression coping into the implant.
– Verify proper seating of the coping.
impression coping.
Ensure–that Verify
Ensure theproper
that – seating
tri-channel
the Tighten
tri-channel ofthe
confithe impression
guration
guide
confi pin
guration onusing
onthethe impression
the Screwdriver Unigrip. Ensure that the tri-channel configuration on the impression
impression
Straumann® coping engages the
coping engages
Step 3 Step –tri-channel
3the tri-channel
Verify proper connection
connection
seating ofinthethe
in theimplant.
implant. coping.
impression coping engages the tri-channel connection in the implant.
– Tighten – Tighten
the guidethe– pin
guide
Relieve pinand
using using
the the Screwdriver
Screwdriver
perforate Unigrip.tray to allow full
Unigrip.
the impression – Tighten the guide pin using the Screwdriver Unigrip.
Bone Level 3.3 NC (Narrow CrossFit™) 35 Ncm SCS Screwdriver
– Relieve and perforate
Step
the impression
3ofofimpression
tray to allow full
– Verify –proper
Verify proper
seating seating
of the
seating
seating of the
tray andthe
the tray
impression
protrusion andof coping.
coping.
protrusion
the guideof therepins. If there– Verify proper seating of the impression coping.
the Ifguide
pins.
– aRelieve
large and
opening, perforate
is a3large opening, it may be closed off using baseplate baseplate
is it may the
be impression
closed off using tray to allow full
Bone Level 4.1, 4.8 RC (Regular CrossFit™) 35 Ncm SCS3 Screwdriver
Step
Step
wax, with
– Relieve andthe wax, seating
with
guide pins
perforate of
the the
guide traypins
indenting tray
the impression and protrusion
to allow fullthe wax. guide
indenting
or perforating or of the
perforating wax. Step
the pins. If there3
– Relieve– seating
and perforate
of –the
Inject impression Inject
tray
the and
impression
is aimpression
large
material opening,
protrusion
tray
material
around of each
the
to
it may allow
around
guide
impression
full
bepins.
closed
each off using coping.
impression
If coping.
there baseplate– Relieve and perforate the impression tray to allow full
Standard/Standard Plus 4.8 RN (Regular Neck) 35 Ncm SCS Screwdriver
seating– isof the tray and protrusion of the guide pins. If there Step
seating 4of the tray and protrusion of the Step 5 5 If there Step 6
a large
Fill the tray – Fill
opening,
with the
wax, ittray
with
may
impression with
be the impression
guide
closed
material offpins
using
and material theand or
indenting
baseplate
seat seat the 4 the wax.
perforating 4 5 guide pins.
is a large opening,
wax, with the
impression it–guide
tray may
impression
Inject
fully beimpression
pinssoclosed
tray
indentingtheoff
thatfully so
orusing
that baseplate
the
perforating
material
tips of all tips
around
the of wax.
the
guide all
eachthe impression
pins guide pinsUnscrew is a Guide
coping. Pins it may be Replace
large opening, closed offHealing Abutment
using baseplate Replace Guide Pins
Standard/Standard Plus 4.8 WN (Wide Neck) 35 Ncm SCS Screwdriver
wax, with arethe
– Inject guide
impression
identifi are
ed. pins
identifiindenting
material ed. around or perforating
each impression
– Fill the tray with impression material and seat the the wax.
coping. wax, with the
4 guide pins indenting or perforating the wax. 5
4
– Fill the tray material
– Inject impression with impression
impression aroundmaterial each
tray fully
and seat the coping.
impression
so that the tips of all the guide pins – Inject impression material around5each impression coping.
Standard Plus 3.3 NN (Narrow Neck) 35 Ncm SCS Screwdriver
Step 4
impression Step
tray 4 so that the
fully tips of all the guide pins 4 4
– Fill the tray with impression arethe material
identifi ed.hasand seat the – Fill the tray with impression material and5 seat the
– are
After –ed.
After
the impression
identifi impression
material material
set, unscrew has set, theunscrew the
Zimmer Dental impression tray fully so that the tips of all the guide pins impression tray fully so that the tips of all the guide pins
guide pins. guide pins.
are identifi
Steped. 4 Step 4 are identified.
– Remove – Remove
the impression the impression
tray and send tray toandthe send
dentalto the dental
Tapered Screw-Vent 3.5, 4.5, 5.7/ Tapered Screw-Vent 3.5, 4.5, – After the impression – Aftermaterial
laboratory, laboratory,
including the
the impression
including
has set, unscrew
guide pins.
material
the guide
For model
thehas set, unscrew the
pins.fabrication,
For model fabrication,
30 Ncm Step1.254 mm guide Hex pins. guide pins. implant Step 4
5.7 friction fit corresponding corresponding
implant replicas shouldreplicas should be
be provided by provided
you by you
– After the impression
– Remove – material
the impression
Remove has
tray
the set,
and unscrew
send
impression to the the
traydental
and send to the dental – After the impression material has set, unscrew the
or your dental or yourlaboratory.
dental laboratory.
Screw-Vent 3.3, 3.7, 4.5/ Screw-Vent 3.3, 3.7, 4.5 friction fit 35 Ncm 1.25pins.
guide mm Hexincluding
laboratory,
laboratory,the guide pins. For model fabrication,
including the guide pins. For model fabrication, guide pins.
– Remove corresponding
Stepthe5impression Stepimplant 5 trayreplicasand send should to betheprovided
dental by you
corresponding implant replicas should be provided by– you Remove the impression tray and send to the dental
or your dental laboratory.
SwissPlus™ 4.8 35 Ncm 1.25–mm
laboratory, Replace Hexthe
including healing
– Replacethe
or your guideabutment.
the healing abutment.
pins.laboratory.
dental For model fabrication, laboratory, including the guide pins. For model fabrication,
corresponding
Step 5 implant replicas should be provided by you corresponding implant replicas should be provided by you
or your–Materials
Replacelaboratory.
dental thefor Step
healing use 5abutment.
with the closed orclosed
open tray or your dental laboratory.
Materials for use with the or open tray
impression –technique
Replace the healing abutment.
impression technique
Step 5 Step 5
Materials for use with the closed or open trayItem number
– Replace the healing abutment.
Description Description – Replace the healing
Item number Descriptionabutment.
Description Item number Item number
Burdette Dental Lab • 131 Lyon Lane • Birmingham,
impression technique
AL 35211
Materials
Screwdrivers for• 800-624-5301
Screwdrivers
use with the closed • www.burdettedental.com
or open tray Plastic Impression Coping (closed tray)
Plastic Impression Coping (closed tray)
impression
Screwdriver
Description Manual technique
Unigrip
Screwdriver 20 mm Unigrip 20 mm
Manual Item29148
number 29148 Impr Cop Cl Tr Plastic
Description ImprNobRpl
Cop ClNP 3.5 mm
Tr Plastic NobRpl NPItem 32425
mm
number
3.5 32425