Professional Documents
Culture Documents
Book 1111
Book 1111
TAG NAMEINSTRUMENT DI DO
DESCRIPTION
For an
YBR-200501 COIL CAR Brake 1 )Brake wi l l Di s engage
Cradl e wi l l go up By Pu
I ntrl ock Satis fi ed.
Interlock-
Coi l Car i n Coi l Saadl e
or
YVH-200501A COIL CAR Cradle up 1 1.I f Coi l I n Peel i ng Stan
2.Pus her wi l l be i n up P
3.Bl a de wi l l be i n up po
4.Bl a de wi l l be i n out p
5.Cradl e not i n i nterme
Cradl e wi l l go up By P
I ntrl ock Satis fi ed.
Inter lock-
I f Cradl e not i n Down P
or
1.I f Coi l In Peel i ng Stan
YVH-200501B COIL CAR Cradle down 1 2.Pus her wi l l be i n up
3.Bl ade wi l l be i n up p
4.Bl ade wi l l be i n out p
or
i f Coi l car not i n Peel i n
Down Pos i tion("GE-200
YVH-200502 COIL CAR Roller contact 1 Al ways Off i n entry Coi l
YVH-200503A COIL CAR Roll Nº1 forward 1 Opera tor Can move rol
Si mul taneous l y from D
YVH-200504A COIL CAR Roll Nº2 forward 1 Pus hbutton (Inchi ng ty
Opera tor Can move rol
YVH-200503B COIL CAR Roll Nº1 back 1
Si mul taneous l y from D
YVH-200504B COIL CAR Roll Nº2 back 1 Pus hbutton (Inchi ng ty
Coil car in entry saddle Sensing distance:
GE-200501 COIL CAR 1 Sensor Sense Coi
position 20 mm
Coil car in loading system Sensing distance:
GE-200502 COIL CAR 1 Sense Coil car In
position 20 mm
Coil car in peeling stand Sensing distance:
GE-200503 COIL CAR 1 Sense Coil car InP
position 20 mm
Coil car in uncoiler limit Sensing distance:
GE-200504 COIL CAR 1 Sense Coil car in
position 20 mm
Sensing distance: Coil Presenton Co
GE-200505 COIL CAR Coil presence on board 1
5 mm will Present
Sensing distance:
GE-200506 COIL CAR Cradle down position 1 Cradle of Coil Ca
20 mm
Sensing distance:
GE-200507 COIL CAR Cradle intermedial position 1 Cradle of Coil Ca
20 mm
Las er Sens or Detect Po
I nput mm Y1-328
Laser loading system. Coil car Sensing distance: I nput mm Y2-25120
GT-200501 COIL CAR
Location on loading line. 0,2-50 mts I nput mm X1-5290
I nput mm X2-16410
Translation car temperature not greater than
TE-200501 COIL CAR
sensor Nº1
Translation car temperature
TE-200502 COIL CAR not greater than
sensor Nº2 (Stand By)
Description
1 MKG-200201
PCC-MKL-200201/R1-IN.ON 1DI
PCC: PEELING STAND - Roll Nº1-INCOMING INSOLATOR ON
PCC-YBR-200201-PROT._OK 1DI PEELING STAND (brake roll nº1) - Protection ok,It Denotes
the Status of MKG-200201
PCC-YBR-200202-PROT._OK 1DI PEELING STAND (brake roll nº1) - Protection ok,It Denotes
the Status of MKG-200202
Roll no-1
VFD OP
CU9
NODE-19
AI
TE-200202 Roll Nº1 Temperature Sensor Nº2 (Stand By)
AI
PCC-YBR-200201-PROT._OK PEELING STAND (brake roll nº1) - Protection ok
FROM
DESK-1
GE-200201_PILOT Peeling stand coil pusher up Pushbutton
YVH-200203A-PLC-OUTPUT Cutter in
MKG200201-MKG-200202
MKG- PEELING Roll Nº2
200202 STAND
GE-200201 PEELING Pusher up
STAND position GE-200201-GE-200203
GE-200202 PEELING Blade up
STAND position
GE-200203 PEELING Blade out
STAND position
GT-200201 PEELING Ultrasonic
STAND centering
system
GT200201-GT200203
GT-200202 PEELING Ultrasonic
STAND centering
system
GT-200203 PEELING Laser
STAND loading
system
GT-200203 PEELING Coil
STAND presence
TE-200201 PEELING
STAND
TE-200201 TO TE-200204
TE-200202 PEELING
STAND
TE-200203 PEELING
STAND
TE-200204 PEELING
STAND
YBR- PEELING Brake roll
200201 STAND Nº1
YBR200201-YBR200202
YBR- PEELING Brake roll
200202 STAND Nº2
YVH- PEELING Coil pusher
200201A STAND up
YVH200201A-YVH200203B
YVH- PEELING Coil pusher
200201B STAND down
TEMPERETURE SENSOR
MOTOR BRAKE
ELECTROMAGNETIC FOR HYDRAULICS
•Cradle ROLL-1 (MKG-200201)and Roll-2 (MKG-200202)Motor Control
by Vfd,
• Due to manually control ,operator Run it with constant speed
through PushButton from desktop(SA13FWD-DESK01)and (SA13REV-
DESK01).ROLL-1 and Roll-2 move forward and backward
simultaneously,Inorder to adjust face of Coil.
GE-200201-GE-200203
GT200201-GT200203
TE-200201 TO TE-200204
YBR200201-YBR200202
YVH200201A-YVH200203B
GEARD MOTOR
TEMPERETURE SENSOR
MOTOR BRAKE
ELECTROMAGNETIC FOR HYDRAULICS
•Cradle ROLL-1 (MKG-200201)and Roll-2 (MKG-200202)Motor Control
by Vfd,
• Due to manually control ,operator Run it with constant speed
through PushButton from desktop(SA13FWD-DESK01)and (SA13REV-
DESK01).ROLL-1 and Roll-2 move forward and backward
simultaneously,Inorder to adjust face of Coil.