Professional Documents
Culture Documents
Coil Car - Io - Des
Coil Car - Io - Des
Cradle up(YVH-200501A)
•Cradle will go up By PushButton("PB14-DESK01") from Desktop-1 if
Intrlock Satisfied.
Interlock-
•Coil Car in Coil Saadle
or
1.If Coil In Peeling Stand("GE-200503"-high)
2.Pusher will be in up Position sensed by("GE-200201"-High)
3.Blade will be in up position sensed by("GE-200202"-High)
4.Blade will be in out position sensed by("GE-200203"-High)
5.Cradle not in intermediate Position("GE-200507"-Low)
YVH-200501A CRADLE DOWN(YVH-200501B)
YVH-200501B • Cradle will go up By PushButton("PB14-DESK01") from Desktop-1 if
Intrlock Satisfied.
YVH-200503A Interlock-
YVH-200503B •If Cradle not in Down Position("GE-200506"-Low)
YVH-200504A or
COIL CAR Cradle up
YVH-200504B
1.If Coil In Peeling Stand("GE-200503"-high)
2.Pusher will be in up Position sensed by("GE-200201"-High)
3.Blade will be in up position sensed by("GE-200202"-High)
4.Blade will be in out position sensed by("GE-200203"-High)
YVH-200502 or
•if Coil car not in Peeling Stand("GE-200503"-low) andCradle not in
Down Position("GE-200506"-Low)
ROLLER NO1(YVH-200503A) AND ROLLER NO-2 (YVH-
200504A)FORWARD
•Operator Can move roll no-1 and rollno-2 Forward
Simultaneously from Desktop-1("SA10FWD-DESK01")by a single
Pushbutton (Inching type)
ROLLER NO1 (YVH-200503B)AND ROLLER NO-2(YVH-200504B)
REVERSE
•Operator Can move roll no-1 and rollno-2 Forward
Simultaneously from Desktop-1("SA10FWD-DESK01")by a single
Pushbutton (Inching type)
Roller contact(YVH-200502)
Always off for entry car
GE-200501 These Equipment detect the coil car position.In each Area these
GE-200502 sensor installed.When Coil Car reaches the perticular area,that
GE-200503 area sensor actuate.
INDUCTIVE
GE-200504 Coil car in entry saddle
COIL CAR POSITION
GE-200505 position (GE-200501)Sensor Sense Coil car Presence In Saddle Position.
DETECTOR
GE-200506 (GE-200502)Sense Coil car In saddle Loading Position.
GE-200507 (GE-200503)Sense Coil car InPeeling StandPosition.
(GE-200504)Sense Coil car in end limit of Uncoiler
(GE-200505)Coil Presenton Coil Car,but it will off When Coil will
Present
(GE-200506)Cradle of Coil Car up limit
(GE-200507)Cradle of Coil Car down limit
This Sensor Detect Coilcar position by analog value.It installed in coil car.
Laser loading system. Coil car Sensing distance:
GT-200501 COIL CAR Laser Sensor Detect Position of Coil Car calibration Parameter
Location on loading line. 0,2-50 mts
Input mm Y1-328
Input mm Y2-25120
Input mm X1-5290
Input mm X2-16410
TE-200501 Translation car temperature This equipment give current tempreature of Coil Car
COIL CAR motor(MKG-200501)
TE-200502 sensor Nº1 If temperature exceeds 300 degree centigrade warning will
generated.
YVH-200501A
YVH-200501B
YVH-200503A
YVH-200503B
YVH-200504A
COIL CAR
YVH-200504B
YVH-200502
GE-200501
GE-200502
GE-200503
GE-200504
COIL CAR
GE-200505
GE-200506
GE-200507
GE-200501_PILOT
GE-200503_PILOT
GE-200504_PILOT
Uncoiler Limit Lamp
GE-200506-PILOT
GE-201401_PILOT
GE-201402_PILOT
ELEMEN
T
Description
DESCRIP
TION on if in
peeling stand)
then it can
move upto
coil saddle
limit("GE-
200501"
•If Cradle car
has coil
sensed
by("GE-
200505"-will
off if coil
present),and
coil car is in
peeling stand
sensed
by("GE-
200503" will
on if in
peeling stand)
and
1.Pusher will
be in up
Position
Translation GEARED sensed
car MOTOR by("GE-
200201")
2.Blade will
be in up
position
sensed
by("GE-
200202")
3.Blade will
be in out
position
sensed
by("GE-
200203")
4.Arm
Support will
be in out
position
sensed
by("GE-
201402")
then only it
can move
backward.
Use of this
Device is to
make CoilCar
Stop. For
Forward or
Reverse
movement of
MOTOR Coil Car(MKG-
Brake BRAKE 200501)Brake
will open
aautomaticall
y and Close
automatically
when
movement
stops.
intermediate
Position("GE-
200507"-Low)
CRADLE
DOWN(YVH-
200501B)
• Cradle will
go up By
PushButton("
PB14-
DESK01")
from
Desktop-1 if
Intrlock
Satisfied.
Interlock-
•If Cradle not
in Down
Position("GE-
200506"-Low)
or
(GE-
200501)Sen
sor Sense
Coil car
Presence In
Saddle
Position.
(GE-
200502)Sen
se Coil car In
saddle
Loading
Position.
(GE-
200503)Sen
se Coil car
INDUCTIV InPeeling
Coil car in E StandPositio
entry saddle POSITION n.
position DETECTO (GE-
200504)Sen
R se Coil car in
end limit of
Uncoiler
(GE-
200505)Coil
Presenton
Coil Car,but
it will off
When Coil
will Present
(GE-
200506)Cra
dle of Coil
Car up limit
(GE-
200507)Cra
dle of Coil
Car down
limit
This Sensor
Detect Coilcar
position by
analog
Laser value.It
loading installed in
Sensing coil car.
system. Coil
distance:
car Location
0,2-50 mts Laser Sensor
on loading Detect
line. Position of
Coil Car
calibration
Parameter
Input mm Y1-
328
Input mm Y2-
25120
Input mm X1-
5290
Input mm X2-
16410
This
Translation equipment
car give current
temperature tempreatur
sensor Nº1 e of Coil Car
motor(MKG
-200501)
If
temperatur
e exceeds
300 degree
centigrade
warning will
generated.
OT will glow
if (GE-
200501)
Sensor get
activated.
GE-
200503_PIL
OT will glow
if GE-
200503
sensor gets
activated.
GE-
200504_PIL
OT will
glow if GE-
200502
sensor gets
activated.
Uncoiler
Limit Lamp
will glow if
DESKTOP PILOT LAMPGE-200504
sensor gets
activated.
GE-200506-
PILOT will
glow if GE-
200506
sensor gets
activated.
GE-
201401_PIL
OT will
glow if GE-
200401
sensor gets
activated.
GE-
201402_PIL
OT will glow
if GE-
200402
sensor gets
activated.